D'Souza, N. A., Chhatbar, I. A., Dahotre, N. B., Berman, D., Chowdhury, T. (2019). Impedance Non-Contact based Multifunctional Polymer Sensor Textiles. 4. ASME.
Dahotre, N. B., Sharma, S. (2022). Laser-Based Additive Manufacturing: Modeling, Simulation, and Experiments. Other. John Wiley VCH.
Dahotre, N. B., Joshi, S. S. (2016). Machining of bone and hard tissues. Springer.
Dahotre, N. B. (2016). Machining of Bones and Hard Tissues. 181. Springer International Publishing.
Dahotre, N. B. (2011). Laser Machining of Advanced Materials. 236. Nwe York: CRC Press-Taylor Francis Group.
Dahotre, N. B. (2007). Laser Machining and Fabrication of Materials. 450. New York: Springer.
Dahotre, N. B. (2007). Laser Machining and Fabrication of Materials pp. 450.
Dahotre, N. B. (2006). Materials Science in Manufacturing. 628. New York: Academic/Elsevier.
Dahotre, N. B. (2006). Materials Science in Manufacturing pp.628.
Dahotre, N. B. (2006). · "Materials Science in Manufacturing", Academic/Elsevier, NY, 2006, pp. 628, ISBN: 0-7506-7716-3..
Dahotre, N. B. (1999). Intermetallic and Ceramic Coatings. New York: Marcel Dekker.
Dahotre, N. B. (1998). Lasers in Surface Engineering. Independent book edited by Prof Dahotre. 628. ASM International.
Dahotre, N. B., Sharma, S., Joshi, S., Banerjee, R. (2022). Directed Energy Deposition. Other. 23A, . Materials Park, Ohio: ASM International.
Dahotre, N. B. (2016). Laser Surface Engineering for Tribology. American Society for Materials (ASM) Internationa.
Dahotre, N. B. (2013). "Laser Surface Hardening", S. Santhanakrishnan Narendra B. Dahotre, ASM Handbook, Volume 4A, Steel Heat Treating Fundamentals and Processes , Editors: Jon Dossett and George E. Totten, pp. 1-26, American Society for Materials (ASM) International, Materials Park, Ohio, 2013..
Dahotre, N. B. (2013). Laser Surface Hardening. American Society for Materials (ASM) Internationa.
Dahotre, N. B. (2004). Encyclopedia of Nanoscience and Nanotechnology, "Nanocrystalline Diamond".
Dahotre, N. B. (1999). Surface Preparation and Properties for Coating Deposition.
Dahotre, N. B. (1998). Laser Surface Texturing.
Dahotre, N. B. (1998). Promise of Lasers: Past and Future in Materials Processing.
Dahotre, N. B. (2023). 8 Non-invasive Density and Porosity Fraction Mapping of Bituminous Coal Using Ultrasound,. Department of Materials Science & Engineering
Dahotre, N. B. (2023). Electrochemical Response of Heterogeneous Microstructure of Laser Directed Energy Deposited CoCrMo in Physiological Medium.
Dahotre, N. B. (2023). Generative Adversarial Networks Assisted Machine Learning based Automated Quantification of Gain Size from Scanning Electron Microscope Back Scatter Images.
Dahotre, N. B. (2023). Gradient Process Parameter Optimization in Additive Friction Stir Deposition of Aluminum Alloys.
Dahotre, N. B. (2023). Influence of Energy Density on the Microstructure, Growth Orientation, and Anisotropy of Magnetic Properties in Additively Manufactured Fe-3.8wt%Si Transformer Steels. Not Hispanic or Latino:. Department of Materials Science & Engineering
Dahotre, N. B. (2023). Laser Based Additive Manufacturing of Tungsten: Multi Scale Thermo-1 Kinetic and Thermo-Mechanical Computational Model and Experiments. Department of Materials Science & Engineering
Dahotre, N. B. (2023). Magnetic Response to Microstructure and Phase Evolution in Laser Thermal Treated FeSiB Amorphous Alloy.
Dahotre, N. B. (2023). Microstructure Enhanced Biocompatibility in Laser Additively Manufactured CoCrMo Biomedical Alloy. Not Hispanic or Latino:. Department of Materials Science & Engineering
Dahotre, N. B. (2023). Multifunctional Phononic Meta-material actuated by the Phase Transition in Water.
Dahotre, N. B. (2023). Non-Contacting Plant Health Monitoring via Ultrasound in Ambient Air. Department of Materials Science & Engineering
Dahotre, N. B. (2023). Non-destructive Evaluation of Bulk Material Zones and Interfaces in Powder Bed Fusion Additive Manufactured Ti6Al4V.
Dahotre, N. B. (2023). Surface Nanostructures Enhanced Biocompatibility and Osteoinductivity of Laser-Additively Manufactured CoCrMo Alloys. Department of Materials Science & Engineering
Dahotre, N. B. (2023). Thermo-Mechanical Process Variables Driven Microstructure Evolution During Additive Friction Stir Deposition of IN625. Not Hispanic or Latino:. Department of Materials Science & Engineering
Dahotre, N. B. (2023). Towards the Next Generation of Machine Learning Models in Additive Manufacturing: A Review of Process Dependent Material Evolution. Department of Materials Science & Engineering
Dahotre, N. B. (2023). Underlying Factors Determining Grain Morphologies in High-strength Titanium Alloys Processed by Additive Manufacturing. Not Hispanic or Latino:. Department of Materials Science & Engineering
Dahotre, N. B. (2023). “Laser powder bed fusion processing of a precipitation strengthenable FCC based high entropy alloy.
Joshi, S. S., Dahotre, N. B. (2017). Laser Surface Engineering for Tribology. ASM handbook. Vol. 18, Friction, lubrication, and wear technology. 661--687.
Hayes, B. J., Ghamarian, I., Dixit, V., Joshi, S. S., Welk, B., Banerjee, R., Dahotre, N. B., Fraser, H., Collins, P. C. (2015). Characterization of electron beam additive manufactured TI-6AL-4V. SAMPE Baltimore Conference and Exhibition 2015.
Dahotre, N. B. (2000). Laser Surface Engineered Hard Coating on Aluminum.
Dahotre, N. B. (1995). Laser Induced Reaction Bonding of High Temperature Structural Ceramics.
Dahotre, N. B. (1993). Carbide Formation During Laser Welding of SiC/Aluminum Composites.
Dahotre, N. B. (1993). Laser Induced Reaction Joining of Metal Matrix Composite.
Dahotre, N. B. (1991). An Evaluation of Strength of Pulsed Laser Welded SiC Particulates Reinforced Al-Alloy Metal Matrix Composite.
Dahotre, N. B. (1991). Laser Welding of SiC/Al-alloy Metal Matrix Composite.
Dahotre, N. B. (1991). Laser Welding Techniques for Alloy 718.
Dahotre, N. B. (1991). The Effect of Laser Pulse Tailored Welding on Inconel 718.
Dahotre, N. B. (1990). Gas Assisted Heat Transfer Effects in Laser Welding Inconel 718.
Dahotre, N. B. (1989). Laser Pulse Welding of Inconel 718.
Dahotre, N. B. (1989). Laser Surface Melting and Alloying of Steel with Chromium.
Dahotre, N. B. (1986). Some Aspects of the Microstructure Defects and Diffusion in Laser Surface Alloying of Steel .
Dahotre, N. B. (1985). Laser Melting and Microstructure of Metallic Glass.
Dahotre, N. B. (1985). Pulse Laser Induced Shear Band Formation in Metallic Glass.
Dahotre, N. B. (2023). Behavioral Simulations and Experimental Evaluations of Stress Induced Spatial Nonuniformity of Dynamic Bulk Modulus in Additive Friction Stir Deposited AA 6061.
Dahotre, N. B. (2023). Boosting Piezoelectricity by 3D Printing PVDF-MoS2 Composite as a Conformal and High-sensitivity Piezoelectric Sensor. Department of Materials Science & Engineering
Parsazadeh, M., Sharma, S., Dahotre, N. B. (2023). Towards the next generation of machine learning models in additive manufacturing: A review of process dependent material evolution. 135(2023), 43. Amsterdam: Elsevier. https://doi.org/10.1016/j.pmatsci.2023.101102
Conner, B., Essel, S., Paul, S., Wertheim, R., Pasang, T., Butcher, Dennis P., Jr.,, Zeidler, H., Dahotre, N. B., Pande, S., Banerjee, R., Cuesta-Lopez, S., Babcsan, N., Solomon, V. (2019). Technological Innovations in Metals Engineering. JOM. 71(2), 651-654.
Patil, S., Mani Krishna, K., Sharma, S., Joshi, S. S., Radhakrishnan, M., Banerjee, R., Dahotre, N. B. (2024). Thermo-mechanical process variables driven microstructure evolution during additive friction stir deposition of IN625. Additive Manufacturing.
Dahotre, N. B., Mishra, R., Banerjee, R. (2023). 6 Hierarchical phase evolution during direct laser deposition of an in-situ Ni-NbC composite. Scripta Materialia. 226, .
Shahzamanian, M., Banerjee, R., Dahotre, N. B., Srinivasa, A. R., Reddy, J. (2023). Analysis of stress shielding reduction in bone fracture fixation implant using functionally graded materials. Other. 117262. Elsevier.
Radhakrishnan, M., McKinstry, M., Chaudhary, V., Nartu, M., Krishna, K. M., Ramanujan, R., Banerjee, R., Dahotre, N. B. (2023). Effect of chromium variation on evolution of magnetic properties in laser direct energy additively processed CoCrxFeNi alloys. Scripta Materialia. 226, 115269. Pergamon.
Mazumder, S., Palaniappan, S., Pantawane, M. V., Radhakrishnan, M., Patil, S. M., Dowden, S., Mahajan, C., Mukherjee, S., Dahotre, N. B. (2023). Electrochemical response of heterogeneous microstructure of laser directed energy deposited CoCrMo in physiological medium. Applied Physics A. 129(5), 332. Springer Berlin Heidelberg Berlin/Heidelberg.
Gaddam, S., Nartu, Mohan Sai Kiran Kumar Yadav,, Chesetti, A., Mantri, S. A., Mishra, R. S., Dahotre, N. B., Banerjee, R. (2023). Hierarchical phase evolution during direct laser deposition of an in-situ Ni-NbC composite. Scripta Materialia. 226, 115225. Pergamon.
Varahabhatla, S. M., Nartu, Mohan Sai Kiran Kumar Yadav,, Mantri, S. A., Chaudhary, V., Krishna, K. M., Joshi, S. S., Ramanujan, R. V., Dahotre, N. B., Banerjee, R. (2023). Influence of energy density on the microstructure, growth orientation, and anisotropy of magnetic properties in additively manufactured Fe-3.8 wt\% Si transformer steels. Materialia. 30, 101854. Elsevier.
Sharma, S., Krishna, K. M., Joshi, S. S., Radhakrishnan, M., Palaniappan, S., Dussa, S., Banerjee, R., Dahotre, N. B. (2023). Laser based additive manufacturing of tungsten: Multi-scale thermo-kinetic and thermo-mechanical computational model and experiments. Acta Materialia. 259, 119244. Pergamon.
Chesetti, A., Banerjee, S., Dasari, S., Varahabhatla, S., Sharma, A., Mantri, S. A., Nartu, Mohan Sai Kiran Kumar Yadav,, Dahotre, N. B., Banerjee, R. (2023). Laser powder bed fusion processing of a precipitation strengthenable FCC based high entropy alloy. Other. 6, 100140. Elsevier.
Dahotre, N. B. (2023). Machine Learning Based De-noising of Electron Back Scatter Patterns of Various Crystallographic Metallic Materials Fabricated Using Laser Directed Energy Deposition. Not Hispanic or Latino:. Department of Materials Science & Engineering
Krishna, K. M., Madhavan, R., Pantawane, M. V., Banerjee, R., Dahotre, N. B. (2023). Machine learning based de-noising of electron back scatter patterns of various crystallographic metallic materials fabricated using laser directed energy deposition. Ultramicroscopy. 247, 113703. North-Holland.
Karri, M., Radhakrishnan, M., Pantawane, M., Banerjee, R., Dahotre, N. Machine learning based de-noising of electron back scatter patterns of various crystallographic metallic materials fabricated using laser directed energy deposition. Ultramicroscopy.
Mckinstry, M., Joshi, S. S., Mani Krishna, K., Radhakrishnan, M., Dahotre, N. B. (2023). Magnetic response to microstructure and phase evolution in laser thermal treated FeSiB amorphous alloy. Journal of Applied Physics.
Mazumder, S., Man, K., Radhakrishnan, M., Pantawane, M. V., Palaniappan, S., Patil, S. M., Yang, Y., Dahotre, N. B. (2023). Microstructure enhanced biocompatibility in laser additively manufactured CoCrMo biomedical alloy. Other. 150, 213415. Elsevier.
Dahotre, N. B., Sharma, S., Joshi, S., Radhakrishnan, M. (2023). Multiphysics Multi-scale Computational Framework for Linking Process-Structure-Property Relationships in Metal Additive Manufacturing: A Critical Review.
Man, K., Mazumder, S., Dahotre, N. B., Yang, Y. (2023). Surface Nanostructures Enhanced Biocompatibility and Osteoinductivity of Laser-Additively Manufactured CoCrMo Alloys. ACS Omega. 8(50), 47658--47666. American Chemical Society.
Nartu, M. S., Welk, B. A., Mantri, S. A., Taylor, N. L., Viswanathan, G. B., Dahotre, N. B., Banerjee, R., Fraser, H. L. (2023). Underlying factors determining grain morphologies in high-strength titanium alloys processed by additive manufacturing. Nature Communications. 14(1), 3288. Nature Publishing Group UK London.
Stephen, A., Bhoyate, S., Cao, P., Advincula, R. C., Dahotre, N. B., Jiang, Y., Choi, W. (2022). 3D Printed Flexible Anode for High Performance Zinc Ion Battery. MRS Communications. 12, 894.
Joshi, S. S., Sharma, S., Radhakrishnan, M., Pantawane, M. V., Patil, S. M., Jin, Y., Yang, T., Riley, D. A., Banerjee, R., Dahotre, N. B. (2022). A multi modal approach to microstructure evolution and mechanical response of additive friction stir deposited AZ31B Mg alloy. Scientific Reports. 12(1), 13234. Nature Publishing Group UK London.
Dahotre, N. B., Joshi, S. S., Sharma, S. (2022). A new data-driven framework for prediction of molten pool evolution and lack of fusion defects in multi-track multi-layer laser powder bed fusion processes. International Journal of Advanced Manufacturing Technology.
Dahotre, N. B., Sharma, S., Radhakrishnan, M., Joshi, S. (2022). A Pseudo Thermo-Mechanical Model Linking Process Parameters to Microstructural Evolution in Multilayer Additive Friction Stir Deposition of Magnesium Alloy. Materials & Design.
Sharma, S., Krishna, K. M., Radhakrishnan, M., Pantawane, M. V., Patil, S. M., Joshi, S. S., Banerjee, R., Dahotre, N. B. (2022). A pseudo thermo-mechanical model linking process parameters to microstructural evolution in multilayer additive friction stir deposition of magnesium alloy. Other. 224, 111412. Elsevier.
Dahotre, N. B., Sharma, S., Joshi, S. (2022). A Universal Predictor-Based Machine Learning Model for Optimal Process Maps in Laser Powder Bed Fusion Process. Other.
Joshi, S. S., Patil, S. M., Mazumder, S., Sharma, S., Riley, D. A., Dowden, S., Banerjee, R., Dahotre, N. B. (2022). Additive friction stir deposition of AZ31B magnesium alloy. Other. 10(9), 2404--2420. Elsevier.
Joshi, S. S., Sharma, A., Sharma, S., Mazumder, S., Pantawane, M. V., Mantri, S. A., Banerjee, R., Dahotre, N. B. (2022). Cyclic thermal dependent microstructure evolution during laser directed energy deposition of H13 steel. Transactions of the Indian Institute of Metals. 75(4), 1007--1014. Springer India New Delhi.
Dahotre, N. B., Radhakrishnan, M. (2022). Effect of Chromium Variation on Evolution of Magnetic Properties in Laser Direct Energy Additively Processed CoCrxFeNi Alloys. Scripta Materialia.
Dahotre, N. B., Banerjee, R. (2022). Magnetic and Mechanical Properties of Additively Manufactured Alx(CoFeNi) Complex Concentrated Alloys. Scripta Materialia. (https://doi.org/10.1016/j.scriptamat.2022.115149), .
Jin, Y., Yang, T., Choi, T., Dahotre, N., Neogi, A., Krokhin, A. (2022). Polarization rotator for shear elastic waves. Applied Physics Letters. 121(042201), . Denton:. 3940 N. Elm St. Suite F115N
Dahotre, N. B., Choi, W., Jiang, Y. (2022). Recent Advances in 3D Printed Sensors: Materials, Design, and Manufacturing. Other. Wiley.
Dahotre, N. B., Joshi, S. S. (2022). Tailored Surfaces on Biomedical Magnesium Alloys via Novel Beam and Friction Based Manufacturing Processes: A Review. Other.
Mazumder, S., Pantawane, M. V., Patil, S., Radhakrishnan, M., Sharma, S., McKinstry, M., Dahotre, N. (2022). Thermokinetically Driven Microstructural Evolution in Laser‐Based Directed Energy‐Deposited CoCrMo Biomedical Alloy. Advanced Engineering Materials. 24(11), 2200352.
Dahotre, N. B. (2022). Ultrasonic Non-contact and Remote Monitoring of Plant Health in Air Ambient.. Other.
Jiang, Y., Islam, M., He, R., Huang, X., Cao, P., Advincula, R. C., Dahotre, N., Dong, P., Wu, H., Choi, W. (2022). Recent Advances in 3D Printed Sensors: Materials, Design, and Manufacturing. Other. 2200492.
Mantri, S. A., Nartu, M., Dasari, S., Sharma, A., Agarwal, P., Salloom, R., Sun, F., Ivanov, E., Cho, K., McWilliams, B., Srivilliputhur, S. G., Dahotre, N., Prima,, Banerjee, R. (2021). Suppression and Reactivation of Transformation and Twinning Induced Plasticity in Laser Powder Bed Fusion Additively Manufactured Ti-10V-2Fe-3Al. Progress in Additive Manufacturing. No. 48, 102406. Elsevier. https://www.sciencedirect.com/science/article/abs/pii/S2214860421005595
Pantawane, M. V., Sharma, S., Sharma, A., Dasari, S., Banerjee, S., Banerjee, R., Dahotre, N. B. (2021). Coarsening of martensite with multiple generations of twins in laser additively manufactured Ti6Al4V. Acta Materialia. 213, 116954. Pergamon.
Mantri, S. A., Dasari, S., Sharma, A., Alam, T., Pantawane, M. V., Pole, M., Sharma, S., Dahotre, N. B., Banerjee, R., Banerjee, S. (2021). Effect of micro-segregation of alloying elements on the precipitation behaviour in laser surface engineered Alloy 718. Acta Materialia. 210, 116844. Pergamon.
Choi, T., Yang, T., Jin, Y., Squires, B., Dahotre, N., Neogi, A. (2021). In-situ monitoring and ex-situ elasticity mapping of laser induced metal melting pool using ultrasound: Numerical and experimental approaches. Journal of Manufacturing Processes. 71, 178-186.
Nartu, Mohan Sai Kiran Kumar Yadav,, Flannery, D., Mazumder, S., Mantri, S. A., Joshi, S. S., Ayyagari, A. V., McWilliams, B., Cho, K., Dahotre, N. B., Banerjee, R. (2021). Influence of Process Parameters on Mechanical and Corrosion Behavior of DED-Processed Biomedical Ti-35Nb-7Zr-5Ta Alloy. JOM. 73(6), 1819--1827. Springer US.
Wu, T., Joshi, S. S., Ho, Y., Pantawane, M. V., Sinha, S., Dahotre, N. B. (2021). Microstructure and surface texture driven improvement in in-vitro response of laser surface processed AZ31B magnesium alloy. Other. Elsevier.
Nartu, M., Dasari, S., Sharma, A., Mantri, S., Sharma, S., Pantawane, M. V., McWilliams, B., Cho, K., Dahotre, N. B., Banerjee, R. (2021). Omega versus alpha precipitation mediated by process parameters in additively manufactured high strength Ti--1Al--8V--5Fe alloy and its impact on mechanical properties. Materials Science and Engineering: A. 141627. Elsevier.
Nartu, M., Pole, M., Mantri, S. A., Haridas, R. S., Scharf, T. W., McWilliams, B., Cho, K., Mukherjee, S., Dahotre, N. B., Banerjee, R. (2021). Process Induced Multi-layered Titanium – Boron Carbide Composites via Additive Manufacturing. Other. 46, 102156.
Nartu, M., Pole, M., Mantri, S., Haridas, R., Scharf, T., McWilliams, B., Cho, K., Mukherjee, S., Dahotre, N. B., Banerjee, R. (2021). Process induced multi-layered Titanium--Boron carbide composites via additive manufacturing. Other. 46, 102156. Elsevier.
Nartu, M., Pole, M., Mantri, S., Haridas, R., Scharf, T., McWilliams, B., Cho, K., Mukherjee, S., Dahotre, N. B., Banerjee, R. (2021). Process induced multi-layered Titanium--Boron carbide composites via additive manufacturing. Other. 46, 102156. Elsevier.
Pantawane, M. V., Sharma, S., Dasari, S., Mantri, S. A., Sharma, A., Banerjee, R., Banerjee, S., Dahotre, N. B. (2021). Spatial Variation of Thermokinetics and Associated Microstructural Evolution in Laser Surface Engineered IN718: Precursor to Additive Manufacturing. Metallurgical and Materials Transactions A. 52(6), 2344--2360. Springer US.
Shittu, J., Sadeghilaridjani, M., Pole, M., Muskeri, S., Ren, J., Liu, Y., Tahoun, I., Arora, H., Chen, W., Dahotre, N. B., others, (2021). Tribo-corrosion response of additively manufactured high-entropy alloy. Other. 5(1), 1--8. Nature Publishing Group.
Ji, X., Pole, M., Ho, T., Akhtar, M. A., Pantawane, M., Mukherjee, S., Dahotre, N. B. (2021). Tribology of rejuvenated CuZr-based amorphous alloys. Wear. 484, 204018. Elsevier.
Pantwane, M., Yang, T., Jin, Y., Joshi, S., Dasari, S., A., Krokhin, A., Srivilliputhur, S. G., Banerjee, R., Neogi, A., Dahotre, N. (2021). Crystallographic texture dependent bulk anisotropic elastic response of additively manufactured Ti6Al4V. Scientific Reports. No. 11, 633. https://www.nature.com/articles/s41598-020-80710-6
Heo, H., Jin, Y., Yang, D., Wier, C., Minard, A., Dahotre, N. B., Neogi, A. (2021). Manufacturing and characterization of hybrid bulk voxelated biomaterials printed by digital anatomy 3d printing. Other. 13(1), 1-10. https://api.elsevier.com/content/abstract/scopus_id/85098870586
Pantawane, M. V., Ho, Y., Joshi, S. S., Dahotre, N. B. (2020). Computational assessment of thermokinetics and associated microstructural evolution in laser powder bed fusion manufacturing of Ti6Al4V alloy. Scientific Reports. 10(1), 1--14. Nature Publishing Group.
Chowdhury, T., D'Souza, N. A., Ho, Y. H., Dahotre, N. B., Mahbub, I. (2020). Embedded Corrosion Sensing with ZnO-PVDF Sensor Textiles. Sensors. 20(11), .
Nartu, Mohan Sai Kiran Kumar Yadav,, Mantri, S. A., Pantawane, M. V., Ho, Y., McWilliams, B., Cho, K., Dahotre, N. B., Banerjee, R. (2020). In situ reactions during direct laser deposition of Ti-B4C composites. Scripta Materialia. 183, 28--32. Pergamon.
Ho, Y., Joshi, S. S., Wu, T., Hung, C., Ho, N., Dahotre, N. B. (2020). In-vitro bio-corrosion behavior of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites. Materials Science and Engineering: C. 109, 110632. Elsevier.
Ho, Y., Man, K., Joshi, S. S., Pantawane, M. V., Wu, T., Yang, Y., Dahotre, N. B. (2020). In-vitro biomineralization and biocompatibility of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites. Bioactive Materials. 5(4), 891--901. Elsevier.
Ho, Y., Man, K., Joshi, S. S., Pantawane, M. V., Wu, T., Yang, Y., Dahotre, N. (2020). In-vitro biomineralization and biocompatibility of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites. Bioactive Materials. 5(4), 891-901. Bioactive Materials. https://www.sciencedirect.com/science/article/pii/S2452199X20301006
Kalakuntla, N., Bhatia, N., Patel, S., Joshi, S. S., Wu, T., Ho, Y., Dahotre, N. B. (2020). Laser patterned hydroxyapatite surfaces on az31b magnesium alloy for consumable implant applications. Materialia. 11, 100693. Elsevier.
Salloom, R., Joshi, S. S., Dahotre, N. B., Srivilliputhur, S. G. (2020). Laser surface engineering of B4C/Fe nano composite coating on low carbon steel: Experimental coupled with computational approach. Other. 190, 108576. Elsevier.
Wall, M. T., Pantawane, M. V., Joshi, S. S., Gantz, F., Ley, N. A., Mayer, R., Spires, A., Young, M. L., Dahotre, N. B. (2020). Laser-coated CoFeNiCrAlTi high entropy alloy onto a H13 steel die head. Surface and Coatings Technology. 387, 125473. Elsevier.
Yang, T., Jin, Y., Choi, T., Choi, T., Choi, T. (2020). Mechanically tunable ultrasonic metamaterial lens with a subwavelength resolution at long working distances for bioimaging. Smart Materials and Structures. 30, 015022. Denton:.
Jin, Y., Yang, T., Heo, H., Krokhin, A., Shi, S. Q., Dahotre, N. B., Choi, T., Neogi, A. (2020). Novel 2D dynamic elasticity maps for inspection of anisotropic properties in fused deposition modeling objects. Other. 12(9), 1966. Multidisciplinary Digital Publishing Institute.
Jin, Y., Yang, t., Choi, T., Choi, T., Choi, T. Q., Choi, T., Choi, T., Choi, T. (2020). Novel 2D Dynamic Elasticity Maps for Inspection of Anisotropic Properties in Fused Deposition Modeling Objects. 12(9), 1966. Polymers.
Pantawane, M. V., Dasari, S., Mantri, S. A., Banerjee, R., Dahotre, N. B. (2020). Rapid thermokinetics driven nanoscale vanadium clustering within martensite laths in laser powder bed fused additively manufactured Ti6Al4V. Materials Research Letters. 8(10), 383--389. Taylor \& Francis.
Dahotre, N. (2020). Crystallographic Texture Dependent Bulk Anisotropic Elastic Response of Additively Manufactured Ti6Al4V. Scientific Reports.
Dahotre, N. (2020). Reducing Coercivity by Chemical Ordering in Additively Manufactured Soft Magnetic Fe-Co (Hiperco) Alloys. Journal of Alloys and Compounds.
Dahotre, N. (2020). Spatial Microstructural Anisotropy Response of Laser Powder Bed Additively Fused Ti6Al4V to Temperature Variation of Aqueous Electrolyte. Applied Physics A: Materials Science & Processing.
Jin, Y., Shi, S. Q., Dahotre, N., Choi, T., Neogi, A. (2020). Novel 2D Dynamic Elasticity Maps for Inspection of Anisotropic Properties in Fused Deposition Modeling Objects. Polymer. 12, .
Dahotre, N. (2020). Thermal Assessment of Ex vivo Laser Ablation of Cortical Bone. ACS Biomaterials Science & Engineering.
Dahotre, N. (2020). Laser Fabrication of Structural Bone: Surface Morphology and Biomineralization Assessment. Lasers in Surgery and Medicine.
Dahotre, N. (2020). Computational Assessment of Thermokinetics and Associated Microstructural Evolution in Laser Powder Bed Fusion Additive Manufacturing of Ti6Al4V Alloy. Scientific Reports.
Nartu, M., Alam, T., Dasari, S., Mantri, S., Gorsse, S., Siller Carrillo, H. R., Dahotre, N. B., Banerjee, R. (2020). Enhanced Tensile Yield Strength in Laser Additively Manufactured Al0.3CoCrFeNi High Entropy Alloy. Materialia. 9(2020), 100522.
Dahotre, N. (2020). Magnetic and Mechanical Properties of an Additively Manufactured Equiatomic CoFeNi Complex Concentrated Alloy. Scripta Materialia. 87, 30-36.
Yang, T., Jin, Y., Choi, T. Y., Dahotre, N. B., Neogi, A. (2020). Mechanically tunable ultrasonic metamaterial lens with a subwavelength resolution at long working distances for bioimaging. Smart Materials and Structures. 30(1), . https://api.elsevier.com/content/abstract/scopus_id/85098629460
Jin, Y., Yang, T., Heo, H., Krokhin, A., Shi, S. Q., Dahotre, N. B., Choi, T. Y., Neogi, A. (2020). Novel 2D dynamic elasticity maps for inspection of anisotropic properties in fused deposition modeling objects. Other. 12(9), . https://api.elsevier.com/content/abstract/scopus_id/85092531267
Dahotre, N. (2019). Challenges and Advances in Osteotomy. 2(1), 1-4.
Kuo, P., Joshi, S. S., Lu, X., Ho, Y., Xiang, Y., Dahotre, N. B., Du, J. (2019). Laser coating of bioactive glasses on bioimplant titanium alloys. International Journal of Applied Glass Science. 10(3), 307--320.
Kuo, P., Joshi, S. S., Lu, X., Ho, Y., Xiang, Y., Dahotre, N. B., Du, J. (2019). Laser coating of bioactive glasses on bioimplant titanium alloys. International Journal of Applied Glass Science. 10(3), 307--320. Wiley Online Library.
Lu, J. Z., Joshi, S. S., Pantawane, M. V., Ho, Y., Wu, T., Dahotre, N. B. (2019). Optimization of biocompatibility in a laser surface treated Mg-AZ31B alloy. Materials Science and Engineering: C. 105, 110028. Elsevier.
Argade, G. R., Joshi, S. S., Ayyagari, A. V., Mukherjee, S., Mishra, R. S., Dahotre, N. B. (2019). Tribocorrosion performance of laser additively processed high-entropy alloy coatings on aluminum. Applied Physics A. 125(4), 1--9. Springer Berlin Heidelberg.
Argade, G. R., Joshi, S. S., Ayyagari, A. V., Mukherjee, S., Mishra, R. S., Dahotre, N. B. (2019). Tribocorrosion performance of laser additively processed high-entropy alloy coatings on aluminum. Applied Physics A. 125(4), 1--9. Springer.
Dahotre, N. (2019). Evolution of Surface Morphology of Er:YAG Laser-machined Human Bone. Lasers in Surgery and Medicine. (https://doi.org/10.1007/s10103-019-02927-w), .
Gu, J. J., Joshi, S. S., Ho, Y. Y., Wei, B. B., Huang, T. T., Lee, J. J., Berman, D., Dahotre, N. B., Aouadi, S. (2019). Oxidation-induced healing in laser-processed thermal barrier coatings. Thin Solid Films. 688, 137481.
Dahotre, N. (2019). 2. “Fundamentals of Three-dimensional Laser Machining of Structural Bone. Journal of Applied Physics. 126(12490), 15.
Dahotre, N. (2019). Optimization of Biocompatibility in Laser Surface Treated Mg-AZ31B Alloy. 105(110028), 12.
Dahotre, N., Mishra, R. S. (2019). Tribocorrosion Performance of Laser Additively Processed High Entropy Alloy Coatings on Aluminum. 125(4), 272.
Dahotre, N., Du, J. (2019). Laser Coating of Bioactive Glasses on Bioimplant Titanium Alloys. 10(3), 307-320.
Dahotre, N. B., Santhanakrishnan, S., Joshi, S. S., Khan, R. J., Fick, D. P., Robertson, W. B., Sheh, R. K., Ironside, C. N. (2018). Integrated experimental and computational approach to laser machining of structural bone. Other. 51, 56--66. Elsevier.
Pantawane, M. V., Joshi, S. S., Dahotre, N. B. (2018). Laser Beam Machining of Aluminum and Aluminum Alloys. Other. 2, 519--541.
Ley, N., Joshi, S. S., Zhang, B., Ho, Y., Dahotre, N. B., Young, M. L. (2018). Laser coating of a CrMoTaWZr complex concentrated alloy onto a H13 tool steel die head. Surface and Coatings Technology. 348, 150--158. Elsevier.
Kuo, P., Joshi, S. S., Lu, X., Ho, Y., Xiang, Y., Dahotre, N. B., Du, J. (2018). Laser coating of bioactive glasses on bioimplant titanium alloys. International Journal of Applied Glass Science.
Joshi, S. S., Choudhuri, D., Mantri, S. A., Banerjee, R., Dahotre, N. B., Banerjee, S. (2018). Rationalizing surface hardening of laser glazed grey cast iron via an integrated experimental and computational approach. Materials & Design. 156, 570-585.
Joshi, S. S., Choudhuri, D., Mantri, S. A., Banerjee, R., Dahotre, N. B., Banerjee, S. (2018). Rationalizing surface hardening of laser glazed grey cast iron via an integrated experimental and computational approach. Other. 156, 570--585. Elsevier.
Dahotre, N. (2018). Integrated Experimental and Computational Approach to Laser Machining of Structural Bone. 51, 56-66.
Dahotre, N. (2018). Rationalizing Surface Hardening of Laser Surface Glazed Grey Cast Iron via an Integrated Experimental and Computational Approach. No. 156(10), 570-585.
Ley, N. A., Joshi, S. S., Zhang, B., Ho, Y., Dahotre, N. B., Young, M. L. (2018). Laser Coating of a CrMoTaWZr Complex Concentrated Alloy onto a H13 Tool Steel Die Head. Surface & Coatings Technology. 348, 150-158. https://doi.org/10.1016/j.surfcoat.2018.02.038
Dahotre, N. (2018). Tailoring Corrosion Resistance of Laser-cladded Ni/WC Surface by Adding Rare Earth Elements. 97(9-12), 4043-4054.
Joshi, S. S., Ghamarian, I., Samimi, P., Katakam, S., Collins, P. C., Dahotre, N. B. (2017). Crystallisation behaviour during tensile loading of laser treated Fe--Si--B metallic glass. Philosophical Magazine. 97(7), 497--514. Taylor \& Francis.
Wu, T., Ho, Y., Joshi, S. S., Rajamure, R. S., Dahotre, N. B. (2017). Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material. Other. 32(4), 797--803. Springer.
Dahotre, N. B. (2016). A Review of the Physiological and Histological Effects of Laser Osteotomy. 41(1), 1-12.
Dahotre, N. B. (2016). Additive Manufacturing via Surface Engineering. 68(7), 1759.
Joshi, S. S., Katakam, S., Singh Arora, H., Mukherjee, S., Dahotre, N. B. (2016). Amorphous coatings and surfaces on structural materials. Critical Reviews in Solid State and Materials Sciences. 41(1), 1--46. Taylor \& Francis.
Dahotre, N. B. (2016). Crystallization behavior during tensile loading of laser treated Fe-Si-B metallic glass.
Dahotre, N. B., Mishra, R. S., (2016). Effect of friction stir processing on microstructure and mechanical properties of laser-processed Mg-4Y-3Nd alloy. 110, 663-675.
Dahotre, N. B. (2016). Effect of Laser Surface Melting on Microstructure and Corrosion Behavior of AZ31B Mg Bio-implant.
Dahotre, N. B. (2016). In Situ Nanocrystallization-Induced Hardening of Amorphous Alloy Matrix Composites Consolidated by Spark Plasma Sintering. 68(7), .
Dahotre, N. B., Banerjee, R., (2016). Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum. 68(7), .
Vora, H. D., Rajamure, R. S., Roy, A., Srinivasan, S., Sundararajan, G., Banerjee, R., Dahotre, N. B. (2016). Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum. JOM. 68(7), 1819–1829. Springer US.
Dahotre, N. B. (2016). Laser Joining of Plain Carbon Steel Using Fe-based Amorphous Alloy Filler. 238, 55-64.
Joshi, S. S., Lu, J. Z., Dahotre, N. B. (2016). Optimization of laser thermal treatment of Fe--Si--B metallic glass. Journal of Manufacturing Processes. 24, 31--37. Elsevier.
Dahotre, N. B. (2016). Optimization of laser thermal treatment of Fe-Si-B metallic glass. 24, 31-37.
Dahotre, N. B., Mukherjee, S., (2016). Thermodynamics and Kinetics of Laser Induced Transformation in Zirconium based Bulk Metallic Glass. 432(B), 237-242.
Vora, H. D., Mridha, S., Katakam, S., Arora, H. S., Mukherjee, S., Dahotre, N. B. (2016). Thermodynamics and kinetics of laser induced transformation in zirconium based bulk metallic glass. Journal of Non-Crystalline Solids. 432, 237--245. North-Holland.
Dahotre, N. B., Mukherjee, S., (2015). Amorphous Coatings and Surfaces on Structural Materials. 1-45.
Dahotre, N. B., Choi, W., (2015). Direct-deposited MoS2 Thin Film Electrodes for High Performance Supercapacitors. 3, 24049-24054,.
Dahotre, N. B. (2015). Dynamic Crystallization During Non-isothermal Laser Thermal Treatment of Fe-Si-B Metallic Glass. 48(49), .
Joshi, S. S., Gkriniari, A. V., Katakam, S., Dahotre, N. B. (2015). Dynamic crystallization during non-isothermal laser treatment of Fe--Si--B metallic glass. Journal of Physics D: Applied Physics. 48(49), 495501. IOP Publishing.
Dahotre, N. B., Mukherjee, S., (2015). Effect of Iron on Enhancement of Magnetic Properties of Co-Fe Metallic Glasses. 46(4), 1019-1023.
Veligatla, M., Katakam, S., Das, S., Dahotre, N. B., Gopalan, R., Prabhu, D., Babu, D. A., Choi-Yim, H., Mukherjee, S. (2015). Effect of iron on the enhancement of magnetic properties for cobalt-based soft magnetic metallic glasses. Metallurgical and Materials Transactions A. 46(3), 1019--1023. Springer US.
Dahotre, N. B. (2015). Evolution of Surface Topography during Three-Dimensional Laser Machining of Structural Alumina: Integrated Experimental and Computational Approach. 19(8), 49-58.
Alam, T., Borkar, T., Joshi, S. S., Katakam, S., Chen, X., Dahotre, N. B., Ramanujan, R. V., Banerjee, R. (2015). Influence of niobium on laser de-vitrification of Fe--Si--B based amorphous magnetic alloys. Journal of Non-Crystalline Solids. 428, 75--81. Elsevier.
Dahotre, N. B., Banerjee, R., (2015). Influence of Niobium on Laser De-vitrification of Fe-Si-B Based Amorphous Magnetic Alloys. 428, 75-81.
Dahotre, N. B. (2015). Laser Additive High Entropy Alloy Coating on Aluminum: Corrosion Behavior. 142, 122-125.
Shon, Y., Joshi, S. S., Katakam, S., Rajamure, R. S., Dahotre, N. B. (2015). Laser additive synthesis of high entropy alloy coating on aluminum: Corrosion behavior. Materials Letters. 142, 122--125. Elsevier.
Dahotre, N. B., Srivilliputhur, S. G., (2015). Laser Alloyed Al - W Coatings on Aluminum for Enhanced Corrosion Resistance. 328, 205-214.
Rajamure, R. S., Vora, H. D., Srinivasan, S., Dahotre, N. B. (2015). Laser alloyed Al-W coatings on aluminum for enhanced corrosion resistance. Applied Surface Science. 328, 205–214. North-Holland.
Dahotre, N. B., (2015). Multiphysics Theoretical Evaluation of Thermal Stresses in Laser Machined Structural Alumina. 2, 1-23.
Dahotre, N. B. (2015). Tensile Behavior of Laser Treated Fe-Si-B Metallic Glass. 118.
Joshi, S. S., Samimi, P., Ghamarian, I., Katakam, S., Collins, P. C., Dahotre, N. B. (2015). Tensile behavior of laser treated Fe-Si-B metallic glass. Journal of Applied Physics. 118(16), 164904. AIP Publishing LLC.
Dahotre, N. B., Mukherjee, S., (2015). Thermodynamics and Kinetics of Laser Induced Transformation in Zirconium based Bulk Metallic Glass. 432(B), 237-242.
Choudhary, N., Patel, M., Ho, Y., Dahotre, N. B., Lee, W., Hwang, J. Y., Choi, W. (2015). Directly deposited MoS2 thin film electrodes for high performance supercapacitors. Other. 3(47), 24049-24054. Royal Society of Chemistry (RSC). http://dx.doi.org/10.1039/c5ta08095a
Dahotre, N. B., Banerjee, R., (2014). Comparison of the Crystallization Behavior of Fe-Si-B-Cu and Fe-Si-B-Cu-Nb Based Amorphous Soft Magnetic Alloys. 3 Biotech. 45A, 2998-3009.
Dahotre, N. B., Banerjee, R., (2014). Improved Soft Magnetic Properties by Laser De-vitrification of Fe-Si-B Amorphous Magnetic Alloys. 122, 155-158.
Dahotre, N. B., Banerjee, R., (2014). Integrated Experimental and Theoretical Approach for Corrosion and Wear Evaluation of Laser Surface Nitrided Ti-6Al-4V Biomaterial in Physiological Solution. 37(9), 153-164.
Dahotre, N. B. (2014). Laser Assisted Fe-based Bulk Amorphous Coating: Thermal Effects and Corrosion. 604, 266-272.
Katakam, S., Joshi, S. S., Mridha, S., Mukherjee, S., Dahotre, N. B. (2014). Laser assisted high entropy alloy coating on aluminum: microstructural evolution. Journal of Applied Physics. 116(10), 104906. AIP Publishing LLC.
Dahotre, N. B., Mukherjee, S., (2014). Laser Assisted High Entropy Alloy: Coating on Aluminum: Microstructural Evaluation.
Dahotre, S. N., Vora, H. D., Rajamure, R. S., Huang, L., Banerjee, R., He, W., Dahotre, N. B. (2014). Laser induced nitrogen enhanced titanium surfaces for improved osseo-integration. Annals of Biomedical Engineering. 42(1), 50–61. Springer US.
Dahotre, N. B. (2014). Laser Machining of Structural Alumina: Influence of Moving Laser Beam on the Evolution of Surface Topography. 3 Biotech. 1-4.
Dahotre, N. B. (2014). Laser Patterning of Fe-Si-B Amorphous Ribbons in Magnetic Field.
Dahotre, N. B. (2014). Laser Surface Alloying of AZ31B Mg Alloy for Bio Wettability.
Rajamure, R. S., Vora, H. D., Gupta, N., Karewar, S., Srinivasan, S., Dahotre, N. B. (2014). Laser surface alloying of molybdenum on aluminum for enhanced wear resistance. Surface and Coatings Technology. Elsevier.
Dahotre, N. B. (2014). Laser Surface Modification of molybdenum on aluminum for enhanced wear resistance. 258, 337-342.
Dahotre, N. B. (2014). MC3T3-E1 Osteoblast Adhesion to Laser Induced Calcium Phosphate Coating on Ti Alloy: an In Vitro Centrifugation Study. 1(2), 71-83.
Dahotre, N. B. (2014). Microstructure and Mechanical Properties of a Laser Coated TiB2/TiC/Al Layer on an Aluminum Alloy Substrate. 29, 53-68.
Katakam, S., Devaraj, A., Bowden, M., Santhanakrishnan, S., Smith, C., Ramanujan, R., Thevuthasan, S., Banerjee, R., Dahotre, N. B. (2014). Publisher’s Note:“Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study”[J. Appl. Phys. 114, 184901 (2013)]. Journal of Applied Physics. 115(4), 049903. AIP Publishing.
Dahotre, N. B. (2014). Structural Relaxation and Nanocrystallization Induced Laser Surface Hardening of Fe-based Bulk Amorphous Alloys. 3 Biotech. 66(6), 1080-1087.
Novak, T. G., Vora, H. D., Mishra, R. S., Young, M. L., Dahotre, N. B. (2014). Synthesis of Al0. 5CoCrCuFeNi and Al0. 5CoCrFeMnNi High-Entropy Alloys by Laser Melting. Metallurgical and Materials Transactions B. 45(5), 1603–1607. Springer US.
Dahotre, N. B., Mishra, R. S., Young, M. L., (2014). Synthesis of Al0.5CoCrCuFeNi and Al0.5CoCrFeMnNi High-entropy Alloys by Laser Melting.
Vora, H. D., Rajamure, R. S., Soundarapandian, S., Srinivasan, S., Dahotre, N. B. (2013). Design and optimization of microstructure for improved corrosion resistance in laser surface alloyed aluminum with molybdenum. Other. 14(8), 1421–1432. Springer Berlin Heidelberg.
Vora, H. D., Rajamure, R. S., Soundarapandian, S., Srinivasan, S., Dahotre, N. B. (2013). Dilution of molybdenum on aluminum during laser surface alloying. Journal of Alloys and Compounds. 570, 133–143. Elsevier.
Katakam, S., Devaraj, A., Bowden, M., Santhanakrishnan, S., Smith, C., Ramanujan, R. V., Thevuthasan, S., Banerjee, R., Dahotre, N. B. (2013). Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study. Journal of Applied Physics. 114(18), 184901. AIP.
Santhanakrishnan, S., Kumar, N., Dendge, N., Choudhuri, D., Katakam, S., Palanivel, S., Vora, H., Banerjee, R., Mishra, R., Dahotre, N. B. (2013). Macro-and Microstructural Studies of Laser-Processed WE43 (Mg-Y-Nd) Magnesium Alloy. Metallurgical and Materials Transactions B. 44(5), 1190–1200. Springer US.
Arora, H. S., Xu, Q., Xia, Z., Ho, Y., Dahotre, N. B., Schroers, J., Mukherjee, S. (2013). Wettability of nanotextured metallic glass surfaces. Scripta Materialia. 69(10), 732--735. Pergamon.
Arora, H. S., Xu, Q., Xia, Z., Ho, Y., Dahotre, N. B., Schroers, J., Mukherjee, S. (2013). Wettability of nanotextured metallic glass surfaces. Scripta Materialia. 69(10), 732-735.
Dahotre, N. B. (2013). · " Laser Coating of Aluminum Alloy EN AW 6082-T651 with TiB2 and TiC: Mirostructure and Mechanical Properties", Dunja Ravnikar, Narendra B. Dahotre, Janez Grum, Applied Surface Science, doi.org/10.1016/j.apsusc.2013.06.089, 2013..
Dahotre, N. B. (2013). · "Characterization of Nanocrystallization Behavior of Spark Plasma Sintered Fe48Cr15Mo14Y2C15B6 Bulk Amorphous Alloys Using Extended Q-Range Small Angle Neutron Scattering", Ashish Singh, Shravan Katakam, Jan Illavsky, Narendra B. Dahotre, Sandip P. Harimkar, J. Applied Physics, 114, 054903 (2013); doi: 10.1063/1.4817379 .*.
Dahotre, N. B. (2013). · "Design and Optimization of Microstructure for Improved Corrosion Resistance of Laser Surface Alloyed Aluminum with Molybdenum", Hitesh D. Vora, Ravi Shankar Rajamure, S. Santhanankrishnan, S.G. Srinivasan, and Narendra B. Dahotre, International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 8, pp. 1421-1432, 2013..
Dahotre, N. B. (2013). · "Dilution of Molybdenum on Aluminum during Laser Surface Alloying", H.D.Vora, R.S. Rajamure, S. S oundarapandian , S. G. Srinivasan, Narendra B. Dahotre, Journal of Alloys and Compounds, in press, March 12, 2013..
Dahotre, N. B. (2013). · "Laser In-situ Synthesis of TiB2-Al Composite Coating for Improved Wear Performance, Surface Alloying of Molybdenum on Aluminum for Corrosion Protection" Shravan Katakam, Nan Asiamah, S. Santhanakrishnan, and Narendra Dahotre, Surface and Coatings Technology, http://dx.doi.org/10.1016/j.surfcoat.2013.09.047 , 2013.
Related Links:
http://dx.doi.org/10.1016/j.surfcoat.2013.09.047.
Dahotre, N. B. (2013). · "Laser Induced Nitrogen Enhanced Titanium Surfaces for Improved Osseo-integration," Sanket N. Dahotre, Hitesh D. Vora, Ravi Shanker Rajamure, Lu Huang, Rajarshi Banerjee, Wei He, Narendra B. Dahotre, Annals of Biomedical Engineering, DOI: 10.1007/s10439-013-0898-z, 2013.
Dahotre, N. B. (2013). · "Laser Surface Modification of Alumina: Integrated Computational and Experimental Analysis", Marco A. Moncayo, Soundarapandian Santhanakrishnan, Hitesh D. Vora, Sameer R. Paital, and Narendra B. Dahotre, Ceramic International, dx.doi.org/10.1016/j.ceramint.2013.01.040, 2013.
Dahotre, N. B. (2013). · "Macro and Microstructural Study of Laser Processed WE43 (Mg-Y-Nd) Magnesium Alloy", S. Santhankrishnan, N. Kumar, N. Dengde, D. Chaudhuri, S. Katakam, S. Palanivel, H.D. Vora, R. Banerjee, R.S. Mishra, and Narendra B. Dahotre, Metallurgical and Materials Transactions B, in press, May 15, 2013..
Dahotre, N. B. (2013). · "Microstructure and Mechanical Properties of a Laser Coated TiB2/TiC/Al Layer on an Aluminum Alloy Substrate", D. Ravnikar, N.B. Dahotre, and J. Grum, Lasers in Engineering, Vol. 0, pp. 1-16, 2013..
Dahotre, N. B. (2013). · "Multiscale Laser Materials Engineering: Energy-Efficient Processing and Materials Performance", Narendra B. Dahotre, Nanomaterials and Energy, Vol. 2, Issue NME2, pp. 69-75, 2013.
Dahotre, N. B. (2013). · "One-dimensional Multi-pulse Laser Machining of Structural Alumina: Evolution of Surface Topography", Hitesh D Vora, S. Santhanakrishnan, Sandip P. Harimkar, Sandra K. S. Boetcher, and Narendra B. Dahotre, the International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-012-4709-8, 2013..
Dahotre, N. B. (2013). · "Wettability of Nano-textured Metallic Glass Surfaces", Harpreet Singh Arora, Quan Xu, Zhenhai Xia, Yee-Hsien Ho, Narendra Dahotre, Jan Schroers, Sundeep Mukherjee, Scripta Materialia , http://dx.doi.org/10.1016/j.scriptamat.2013.08.014 , 2013.
Related Links:
http://dx.doi.org/10.1016/j.scriptamat.2013.08.014.
Katakam, S., Hwang, J. Y., Vora, H., Harimkar, S. P., Banerjee, R., Dahotre, N. B. (2012). Laser-induced thermal and spatial nanocrystallization of amorphous Fe--Si--B alloy. Scripta Materialia. 66(8), 538--541. Pergamon.
Dahotre, N. B. (2012). · "Computational Modeling and Experimental Based Parametric Study of Multi-Track Laser Processing of Alumina", Marco A. Moncayo, Soundarapandian Santhanakrishnan, Hitesh D. Vora, Sameer R. Paital, and Narendra B. Dahotre, Optics and Laser Technology, http://dx.doi.org/10.1016/j.optlastec.2012.11.019 .
Related Links:
http://dx.doi.org/10.1016/j.optlastec.2012.11.019.
Dahotre, N. B. (2012). · "Densification Behavior and Wear Response of Spark Plasma Sintered Iron-based Bulk Amorphous Alloys", Ashish Singh, Sameer R. Paital, Abhinay Andapally, Narendra B. Dahotre, Sandip P. Harimkar, Advanced Engineering Materials, Vol. 14, Issue 6, pp: 400-407, 2012 ..
Dahotre, N. B. (2012). · "Evolution of Surface Topography in One-Dimensional Laser Machining Structural Alumina", H. D. Vora, S. Soundarapandian, S. P. Harimkar, S. K. S. Boetcher, and Narendra B. Dahotre, Journal of the European Ceramic Society, Vol. 32, Issue 16, pp: 4205-4218, 2012..
Dahotre, N. B. (2012). · "Fe-Based Amorphous Coatings on AISI 4130 Structural Steel for Corrosion Resistance", Shravan Katakam, S. Santhanakrishnan, and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM) , Vol. 64, No. 6 , pp: 709-715, 2012.
Related Links:
http://www.springerlink.com/content/1047-4838/62/6/.
Dahotre, N. B. (2012). · "Improved Corrosion and Wear Resistance of Mg Alloys via Laser Surface Modification of Al on AZ31B", Sameer R. Paital, Ananya Bhattacharya, Marco Moncayo, Yee Hsien Ho, Kristopher Mahdak, Soumya Nag, Rajarshi Banerjee, Narendra B. Dahotre, Surface Coating & Technology, Vol. 206, No. 8-9, pp. 2308-2315, 2012..
Dahotre, N. B. (2012). · "In situ Laser Synthesis of Fe-based Amorphous Matrix Composite Coating on Structural Steel" Shravan Katakam, Sameer Paital, Junyeon Hwang, Rajarshi Banerjee, and Narendra Dahotre, Metallurgical and Materials Transactions A, Vol. 43, No. 13, pp: 4957-4966, 2012..
Dahotre, N. B. (2012). · "Laser coating of hydroxyapatite on Mg for enhanced physiological corrosion resistance and biodegradability", S. Santhanakrishnan, Y. H. Ho and N. B. Dahotre, Materials Technology, DOI 10.1179/1753555712Y.0000000022 ..
Dahotre, N. B. (2012). · "Laser-induced Thermal and Spatial Nanocrystallization of Amorphous Fe–Si–B Alloy", Shravana Katakam, Jun Y. Hwang, Hitesh Vora, Sandip P. Harimkar,Rajarshi Banerjee and Narendra B. Dahotre, Scripta Materialia, Vol. 66, pp. 538-542, 2012..
Dahotre, N. B. (2012). · "Pulsed Laser Surface Modification of AZ31B Mg with Al-Si", Baoshuai Du, Sameer R. Paital, and Narendra B. Dahotre, Surface Review and Letters, Vol. 19, No. 5, (2012) 1250015, DOI: 10.1142/S0218625X12500151 ..
Dahotre, N. B. (2012). · "Stress-Induced Selective Nano-crystallization in Laser Processed Amorphous Fe-Si-B Alloys", Shravana Katakam, S. Santhanakrishnan, Hitesh Vora, Junyeon Hwang, R. Banerjee, and N. B. Dahotre Philosophical Magazine Letters, Vol. 92, Issue 11, pp: 617-624, 2012..
Dahotre, N. B. (2012). · "Synthesis of TiB2-TiC/Fe nano-composite coating by laser surface engineering", Baoshuai Du, Sameer R. Paital, and Narendra B. Dahotre, Optics & Laser Technology, in press, May 18, 2012..
Dahotre, N. B. (2011). · " Electrochemical and Mechanical Behavior of Laser Processed Ti6Al4V Surface in Ringers Physiological Solution", Raghuvir Singh, S.K. Tiwari, Suman K. Mishra, and Narendra B. Dahotre, J. Materials Science: Materials in Medicine, Vol. 22, pp. 1787-1796, 2011..
Dahotre, N. B. (2011). · " Periodically Laser Patterned Fe-B-Si Amorphous Ribbons: Phase Evolution and Mechanical Behavior" Sandip P. Harimkar, Sameer R. Paital, Gangyao Wang, Peter K. Liaw, Narendra B. Dahotre, Advance Engineering Materials, Vol. 13, No. 10, pp . 955-960, 2011..
Dahotre, N. B. (2011). · "Absorptivity Transition in 1.06 μm Wavelength Laser Machining of Structural Ceramics", Anoop N. Samant and Narendra B. Dahotre, Int. J. Appl. Ceramic Technology, Vol. 8, Issue 1, pp: 127–139, January/February 2011..
Dahotre, N. B. (2011). · "Laser Surface Modification for Synthesis of Controlled Textured Bioactive and Biocompatible Ca-P Coatings on Ti-6Al-4V", Sameer R. Paital, Nancy Bunce, Peeyush Nandwana, Chinmay Honrao, Soumya Nag, Wei He, Raj Banerjee, Narendra B. Dahotre, Journal of Materials Science: Materials in Medicine, Vol.22, No.6, pp. 1393-1406, 2011 ..
Dahotre, N. B. (2011). · "Osteoblast Interaction with Laser Cladded HA and SiO2-HA Coating on Ti-6Al-4V" Yuling Yang, Kaan Serpersu, Wei He, Sameer R Paital, and Narendra B Dahotre, Materials Science and Engineering C, Vol. 31, pp. 1643-1652, 2011..
Dahotre, N. B. (2011). · "Wear Behavior of Plasma Electrolytic Oxidation (PEO) and Hybrid Coatings of PEO and Laser on MRI 230D Magnesium Alloy", G. Rapheal, S. Kumar, C. Blawert and Narendra B. Dahotre, Wear, Vol. 271, Issues 9-10, pp. 1987-1997, 2011
Related Links:.
Dahotre, N. B. (2010). Three-Dimensional Laser Machining of Structural Ceramics.
Dahotre, N. B. (2010). Wetting Behavior of Laser Synthetic Micro Textures on Ti-6Al4V for Bioapplication.
Dahotre, N. B. (2010). Wetting Effects on In-vitro Bioactivity and In-vitro Biocompatibility of Laser Micro-textured Ca-P Coating.
Dahotre, N. B. (2010). · "Effects of SiO2 Substitution on Wettability of Laser Deposited Ca-P Biocoating on Ti-6Al-4V" Yuling Yang, Sameer R Paital, Narendra B Dahotre, Journal of Materials Science: Materials in Medicine, Vol. 21, pp. 2511-2521, 2010..
Dahotre, N. B. (2010). · "Fractal Approach to Laser Processed Surfaces", Anil Kurella and Narendra Dahotre, Advanced Engineering Materials , Vol. 12, Issue 6, pp: 517-521, 2010..
Dahotre, N. B. (2010). · "Laser Process Effect on the Texture Evolution and Wetting Behavior in Implantable Ti-6Al-4V Alloys", Sameer R. Paital, Wei He, Claus Daniel, and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM) , Vol. 62, No. 6 , pp: 76-83, 2010.
Related Links:
http://www.springerlink.com/content/1047-4838/62/6/.
Dahotre, N. B. (2010). · "Laser Pulse Dependent Micro Textured Calcium Phosphate Coatings for Improved Wettability and Cell Compatibility", Sameer R. Paital, Wei He, Narendra B. Dahotre, Journal of Materials Science: Materials in Medicine, Vol. 21, No. 7 , pp: 2187-2200, 2010 .
Related Links:
http://www.springerlink.com/content/0957-4530/21/7/.
Dahotre, N. B. (2010). · "Wetting and in Vitro Bioactivity of Laser Processed CaP Coating with Presence and Variation of SiO2 on Ti-6Al-4V" Yuling Yang, Sameer R Paital, Narendra B Dahotre, Materials Technology: Advanced Performance Materials, Vol.25, No.3-4, pp.137-142, 2010..
Dahotre, N. B. (2010). · "Wetting Effects on In-vitro Bioactivity and In-vitro Biocompatibility of Laser Micro-textured Ca-P Coating", Sameer R. Paital, Zheng Cao, Wei He, Narendra B. Dahotre, Biofabrication, Vol. 2, No. 2, pp. 1-14, 2010.
Dahotre, N. B. (2009). A Thermal Model for Laser Interaction with Thick Dielectric Film on Metallic Substrate: Application to Ca-P Layer on Ti Alloy.
Dahotre, N. B. (2009). Absorptivity Transition in 1.06 μm Wavelength Laser Machining of Structural Ceramics.
Dahotre, N. B. (2009). An Integrated Computational Approach to Single Dimensional Laser Machining of Magnesia.
Dahotre, N. B. (2009). Calcium Phosphate Coatings for Bio Implant Applications: Materials, Performance Factors, and Methodologies.
Dahotre, N. B. (2009). Computational Approach to Photonic Drilling of Silicon Carbide.
Dahotre, N. B. (2009). Differences in Physical Phenomena Governing Laser Machining of Structural Ceramics.
Dahotre, N. B. (2009). Faceted Surface Grain Morphology of Rapidly Solidified Alumina: Characterization and Potential Applications.
Dahotre, N. B. (2009). In-situ Absorptivity Prediction during 1.06 μm Wavelength Laser Low Aspect Ratio Machining of Structural Ceramics.
Dahotre, N. B. (2009). Laser Machining of Structural Ceramics: A Review.
Dahotre, N. B. (2009). Laser Melting of Plasma Sprayed Aluminum Oxide Coatings Reinforced with Carbon Nanotubes.
Dahotre, N. B. (2009). Laser Surface Cladding of MRI 153M Magnesium Alloy with (Al+Al2O3).
Dahotre, N. B. (2009). Laser Surface Multilevel Self Assembly of CaP-TiO2 Particles.
Dahotre, N. B. (2009). Microindentation Fracture Behavior of Laser Surface Modified Alumina Ceramic.
Dahotre, N. B. (2009). Microstructure and Properties of Spark Plasma Sintering of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass.
Dahotre, N. B. (2009). Physical Effects of Multipass Two Dimensional Laser Machining of Structural Ceramics.
Dahotre, N. B. (2009). Physical Effects of Multipass Two-Dimensional Laser Machining of Structural Ceramics.
Dahotre, N. B. (2009). Pulsed Laser Surface Treatment of Magnesium: Correlation between Thermal Model and Experimental Observations.
Dahotre, N. B. (2009). Rapid Surface Microstructuing of Porous Alumina Ceramic Using Continuous Wave Nd:YAG Laser.
Dahotre, N. B. (2009). Wettability and Kinetics of Hydroxyapatite Precipitation on Laser Textured Ca-P Bioceramic Coating.
Dahotre, N. B. (2008). Ab initio Physical Analysis of Single Dimensional Laser Machining of Silicon Nitride.
Dahotre, N. B. (2008). Computational Predictions in Single-Dimensional Laser Machining of Alumina.
Dahotre, N. B. (2008). Controlled Evolution of Morphology and Microstructure in Laser Interference Structured Zirconia.
Dahotre, N. B. (2008). Effect of Laser Surface Treatment on Corrosion and Wear Resistance of ACM720 Mg Alloy.
Dahotre, N. B. (2008). Effect of Microstructural Evolution on Wettability of Laser Coated Calcium Phosphate on Titanium Alloy.
Dahotre, N. B. (2008). Influence of Laser Fluence on the Microstructure Evolution and Fractal Dimensions of Laser Surface Modified Alumina Ceramic.
Dahotre, N. B. (2008). Laser Based Biomimetic and Bioactive Coatings.
Dahotre, N. B. (2008). Laser Surface Processing of Ti6Al4V in Gaseous Nitrogen: Corrosion Performance in Physiological Solution.
Dahotre, N. B. (2008). Multilevel Residual Stress Evaluation in Laser Surface Modified Alumina.
Dahotre, N. B. (2008). Multiscale Wear of Plasma-sprayed Carbon-nanotube-reinforced Aluminum Oxide Nanocomposite Coating .
Dahotre, N. B. (2008). Phase Constituents and Microstructure of Laser Synthesized TiB2-TiC Reinforced Composite Coating on Steel.
Dahotre, N. B. (2008). Process Optimization in Laser Surface Structuring of Alumina.
Dahotre, N. B. (2008). Pulsed Laser Synthesis of Ceramic-Metal Composite Coating on Steel.
Dahotre, N. B. (2007). Corrosion Degradation and Prevention by Surface Modification of Biometallic Materials .
Dahotre, N. B. (2007). Laser Assisted Densification of Surface Porosity in Structural Alumina Ceramic.
Dahotre, N. B. (2007). Laser Beam Operation Mode Dependent Grain Morphology of Alumina.
Dahotre, N. B. (2007). Laser Cleaning and Dressing of Vitrified Grinding Wheels.
Dahotre, N. B. (2007). Laser Surface Cladding of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass on AISI 4041 Steel.
Dahotre, N. B. (2007). Laser Surface Modifications of Advanced ceramics- A Modeling Approach.
Dahotre, N. B. (2007). Laser Surface Treatment for Porous and Textured Ca-P Bio-Ceramic Coating on Ti-6Al-4V.
Dahotre, N. B. (2007). State of Residual Stress in Laser Deposited Ceramic Composite Coatings on Aluminum Alloy.
Dahotre, N. B. (2007). Temporally Evolved Recoil Pressure Driven Melt Infiltration During Laser Surface Modifications of Porous Alumina Ceramic.
Dahotre, N. B. (2007). Tribological Behavior of Plasma Sprayed Carbon Nanotube Reinforced Hydroxyapatite-Coating in Physiological Solution.
Dahotre, N. B. (2007). Validation of Crystallographic Correlation for Faceted Morphology in Laser Surface Engineered Alumina Ceramic.
Dahotre, N. B. (2006). Computational prediction of grain size during rapid laser surface modification of Al-O Ceramic.
Dahotre, N. B. (2006). Crystallographic and Morphological Textures in Laser Surface Modified Alumina Ceramic.
Dahotre, N. B. (2006). Effect of Laser Fluence on Surface Microstructure of Alumina Ceramic.
Dahotre, N. B. (2006). High-density-infrared Treatment of Mineral Processing Equipment for Enhanced Wear Resistance .
Dahotre, N. B. (2006). Laser Dressing of Alumina Grinding Wheels.
Dahotre, N. B. (2006). Laser Induced Functionality Textured Bio-coating.
Dahotre, N. B. (2006). Laser Induced Hierarchical Calcium Phosphate Structures.
Dahotre, N. B. (2006). Laser Induced Multi-scale Textured Zirconia Coating on ti-6Al-4V.
Dahotre, N. B. (2006). Laser Surface Cladding of Fe-B-C, Fe-B-Si and Fe-BC-Si-Al-C on Plain Carbon Steel.
Dahotre, N. B. (2006). Laser Surface Modification of Ti-6Al-4V: Wear and Corrosion Characterization in Simulated Bio-fluids.
Dahotre, N. B. (2006). Laser Synthesis of Palladium-Alumina Composite Membranes for Production of High Purity Hydrogen form Gasification .
Dahotre, N. B. (2006). Microgrinding Hypereutectoid Steels Using Laser Modified Corundum Abrasive Materials.
Dahotre, N. B. (2006). Molecular Modeling of Metastable FeB49 Phase Evolution in Laser Surface Engineered Coating.
Dahotre, N. B. (2006). Phase Modulated Hierarchical Surface Structures by Interfering Laser Beams .
Dahotre, N. B. (2006). Prediction of Solidification Microstructure During Laser Dressing of Alumina Grinding Wheel Material.
Dahotre, N. B. (2005). A Comparative Study to Estimate Effective Elastic Modulus of Laser Engineered Composite Boride Coating.
Dahotre, N. B. (2005). Influence of Laser Surface Modification on Corrosion Behavior of Stainless Steel 316L and Ti6Al4V in Simulated Body Fluid.
Dahotre, N. B. (2005). Microstructure and Microtexture in Laser-dressed Alumina Grinding Wheel Material.
Dahotre, N. B. (2005). Morphological Modification in Laser Dressed Alumina Grinding Material for Microscale Grinding.
Dahotre, N. B. (2005). Nanocoating for Engine Application .
Dahotre, N. B. (2005). Observation of Exothermic Reaction During Laser Assisted Iron Oxide Coating on Aluminum Alloy.
Dahotre, N. B. (2005). Phase Evolution during Laser In-Situ Carbide Coating.
Dahotre, N. B. (2005). Surface Modification for Bioimplants: The Role of Laser Surface Engineering.
Dahotre, N. B. (2005). The Application of Laser-Induced Multi-Scale Surface Texturing.
Dahotre, N. B. (2005). Thermal Transitions in Fe-Ti-Ce-C Quaternary System used as a Precursor During Laser In-Situ Carbide Coating.
Dahotre, N. B. (2005). Tribology of Laser Modified Surface of Stainless Steel in Physiological Solution.
Dahotre, N. B. (2005). Tribology of Laser Modified Surface of Stainless Steel in Physiological Solution .
Dahotre, N. B. (2004). Auger Microscopy of Laser Induced Fe-oxide/Al Reaction Composite Coating.
Dahotre, N. B. (2004). Auger Microscopy of Laser Induced Fe-oxide/Al Reaction Composite Coating.
Dahotre, N. B. (2004). In-situ Formation of Ni-alumina Nanocomposite During Laser Processing.
Dahotre, N. B. (2004). Infrared Thermography During Laser Surface Engineering of Ceramic Coating on Metal.
Dahotre, N. B. (2004). Instrumented Indentation Characterization of Laser- Remelted A319Al Alloy.
Dahotre, N. B. (2004). Laser In-Situ Synthesis of Combinatorial Coating on Steel.
Dahotre, N. B. (2004). Laser In-Situ Synthesis of Combinatorial Coating on Steel.
Dahotre, N. B. (2004). Nanosurfacing for Engine Application .
Dahotre, N. B. (2004). Thermography During Laser Surface Melting of Cast Aluminum Alloys.
Dahotre, N. B. (2003). Effect of Processing Parameters on the Cohesive Strength of Laser Surface Engineered Ceramic Coatings on Aluminum Alloys.
Dahotre, N. B. (2003). Instrumented Indentation Characterization of Laser Induced Fe3O4/Al Composite Coating.
Dahotre, N. B. (2003). Laser Dressing of Vitrified Aluminum Oxide Grinding Wheels.
Dahotre, N. B. (2003). Micro-mechanical Properties of Laser Induced Iron Oxide-Aluminum Matrix Composite Coating.
Dahotre, N. B. (2002). Elastic Modulus Pulse Electrode Deposited Composite Boride Coating Using Nanoindentation.
Dahotre, N. B. (2002). Evaluation of Laser Surface Engineered Iron Oxide Coatings on Cast Aluminum Alloy for Wear Application.
Dahotre, N. B. (2002). High-Density Infrared Processing of WC/Ni-11P Cermet Coatings.
Dahotre, N. B. (2002). Laser Surface Engineered VC Coating for Extended Die Life.
Dahotre, N. B. (2002). Laser Surface Engineering.
Dahotre, N. B. (2002). Microstructural and Tribological Characterization of Laser Engineered VC Coating on Tool/Die Steel.
Dahotre, N. B. (2002). The Laser Induced Combustion Synthesis of Iron Oxide Nanocomposite Coating on Aluminum.
Dahotre, N. B. (2002). Tungsten Laser Surface Alloying of A356 Al Alloy: Tribological Performance and Characterisation.
Dahotre, N. B. (2002). Variation of Structure with Input Energy During Laser Surface Engineered Ceramic Coating on Aluminum Alloys.
Dahotre, N. B. (2001). Deformation Behavior of Laser Surface Engineered Titanium Diboride Coating on Steel.
Dahotre, N. B. (2001). High Temperature Oxidation of Laser Surface Engineered VC Coating on H13 Die Casting Die Steel.
Dahotre, N. B. (2001). Laser Assisted Iron Oxide Coating on Cast Al Alloy for Automotive Engine Application.
Dahotre, N. B. (2001). Mechanical Characterization of the Interface in Laser Surface Engineered Composite Titanium Diboride Coating on Steel.
Dahotre, N. B. (2001). Mechanism of High Temperature Oxidation of Laser Surface Engineered TiC/Al Composite Coating on 6061 Al.
Dahotre, N. B. (2001). Refractory Ceramic Coatings: Processes, Systems and Wettability and Adhesion.
Dahotre, N. B. (2001). Wear Resistance of a Laser Alloyed A-356 Aluminum/WC Composite.
Dahotre, N. B. (2000). Comparative Wear in Titanium Diboride Coatings on Steel Using High Energy Density Processes.
Dahotre, N. B. (2000). Elevated Temperature Oxidation of Laser Engineered Composite Boride Coating on Steel.
Dahotre, N. B. (2000). Functionality of Laser Surface Engineered Composite Titanium Diboride Coating.
Dahotre, N. B. (2000). In-situ Synthesis of Intermetallic and Ceramic Coatings using Pulse Electrode Surfacing.
Dahotre, N. B. (2000). Interfacial Strength of Laser Surface Engineered TiC Cating on 6061 Al using Four-Point Bend Test.
Dahotre, N. B. (2000). Laser Engineered Titanium Boride Coating.
Dahotre, N. B. (2000). Mechanical Properties of Laser Engineered Composite Boride Coating on Steel: A Nanoindentation Approach.
Dahotre, N. B. (2000). Microstructural and Tribological Characterization of an A-356 Aluminum Alloy Superficially Modified by Laser Alloying.
Dahotre, N. B. (2000). Neural Networks in Studies on Oxidation Behavior of Laser Surface Engineered Composite Boride Coating.
Dahotre, N. B. (2000). Surface Modification and Characterization of Functional Oxide Ceramics using C02 Laser.
Dahotre, N. B. (2000). Wear Enhancement of Aluminum by Laser Surface Alloying with Silicon.
Dahotre, N. B. (1999). Ceramic/Metal Interface in Laser Deposited Hard Refractory Composite Coating: Electron Microscopy Study.
Dahotre, N. B. (1999). Evaluation of Laser Surface Engineered Boride Coating in Various Accelerated Corrosion and Oxidation Environments.
Dahotre, N. B. (1999). Evolution of Interface in Pulsed Electrode Deposited Titanium Diboride on Cooper and Steel.
Dahotre, N. B. (1999). Formation of a Wear Resistant Surface on Al by Laser Aided In-situ Synthesis of MoSi2.
Dahotre, N. B. (1999). Laser Deposited Titanium Diboride Coating for Protection of Molten Aluminum Handling Tools and Molds.
Dahotre, N. B. (1999). Laser Surface Engineered TiC Coating on 6061 Al Alloy: Microstructure and Wear.
Dahotre, N. B. (1999). Laser Surface Engineering of Steel for Hard Refractory Ceramic Composite Coating.
Dahotre, N. B. (1999). Non-Vacuum Laser Deposition of Buffer Layers for Coated Conductors.
Dahotre, N. B. (1999). Pulsed Electrode Surfacing of Steel with TiC Coating: Microstructure and Wear Properties.
Dahotre, N. B. (1999). Refractory Ceramic Composite Coating via Laser Surface Engineering.
Dahotre, N. B. (1999). Synthesis of Boride Coating on Steel using High Energy Density Processes: Comparative Study of Evolution of Microstructure.
Dahotre, N. B. (1999). The Influence of Metals and Carbides During Laser Surface Modification of Low Alloy Steel.
Dahotre, N. B. (1999). The Influences of Metals and Carbides During Laser Surface Modification of Low Alloy Steel.
Dahotre, N. B. (1998). Diffusion Bonding of Laser Surface Melted Ni-alloy Material.
Dahotre, N. B. (1998). Laser Induced Reaction Coating of Ceramic on Ceramic Composite for Enhanced High Temperature Corrosion Resistance.
Dahotre, N. B. (1998). Pulse Electrode Deposition of Superhard Boride Coatings on Ferrous Ally.
Dahotre, N. B. (1997). Evaluation of Microstructure in BaTiO3 Thin Films Recrystallized by Laser.
Dahotre, N. B. (1997). Evolution of Microstructure in BaTiO3 Thin Films Recrystallised by Laser.
Dahotre, N. B. (1997). Laser Ablation Synthesis and Characterization of Nitride Coatings.
Dahotre, N. B. (1997). Structural and Hardness Studies of CNx/TiN Composite Coatings on Si(100) Substrate by Laser Ablation Method.
Dahotre, N. B. (1995). High Temperature Ceramic Coating of Ceramic by Laser In-Situ Reaction Technique.
Dahotre, N. B. (1994). Diamand Materials for Electromagnetic Railguns.
Dahotre, N. B. (1994). Effect of Particulate Loading on Heat and Mass Transfer during Laser Welding of Metal Matrix Composites.
Dahotre, N. B. (1994). Laser Induced Liquid Phase Reaction Synthesis Assisted Joining of Metal Matrix Composite.
Dahotre, N. B. (1993). Effect of Grain Structure on Phase Transformation Events in the Inconel 718.
Dahotre, N. B. (1993). Effect of Grain Structure on Phase Transformation Events in the Inconel 718.
Dahotre, N. B. (1992). Gas Assisted Heat Transfer Effects in Laser Welding Inconel 718.
Dahotre, N. B. (1992). Laser Transformation of Pb-Sb, Pb-Ca and Pb-Sb-Sn-As Alloys.
Dahotre, N. B. (1992). Laser Treatment of Lead-Alloys for Battery Grid.
Dahotre, N. B. (1991). Fusion Zone Structures in Laser Welded Al-SiC Composites.
Dahotre, N. B. (1991). Pulse Laser Processing of a SiC/Al-Alloy Metal Matrix Composite.
Dahotre, N. B. (1990). Development of Microstructure in Laser Surface Alloying of Steel with Chromium.
Dahotre, N. B. (1990). Laser Surface Modification of Zinc-Base Composites.
Dahotre, N. B. (1989). Laser Processing of SiC/Al-Alloy Metal Matrix Composite (MMC).
Dahotre, N. B. (1987). Laser Surface of W2 Tool Steel: Effects of Prior Heat Treatment.
Dahotre, N. B. (1987). Shear Band Formation and Cracking of a Metallic Glass Irradiated with High Energy Laser Pulses.
Dahotre, N. B. (1984). Damage in Aluminum, Zinc and Tin from a Nanosecond Electric Pulse Discharge.
Dahotre, N. B. (2023). Defect-free Sound Insulator using Single Metal based Friction Stir Process Array.
Dahotre, N. B., Sohn, J., Joshi, S. S. (2020). Laser dimpled stent for prevention of restenosis. Google Patents.
