Banerjee, R. (2005). Influence of Crystallographic Variant Selection on Microstructural Evolution in Titanium Alloys.
Banerjee, R. (2003). A Combinatorial Approach to the Development of Neural Networks for the Prediction of Composition / Microstructure / Property Relationships in Ti Alloys.
Banerjee, R. (2003). Atom Probe Tomography Characterization of Thin Film Multilayers.
Banerjee, R. (2003). Direct Laser Deposition of In Situ Boride Reinforced Titanium Alloy Composites.
Banerjee, R. (2003). Direct Laser Deposition of In Situ Metal Matrix Composites Based on Titanium Borides.
Banerjee, R. (2003). Modeling the Relationships between Microstructural Parameters and the Tensile Properties in Ti-6Al-4V using Neural Networks and Fuzzy Logic Models.
Banerjee, R. (2003). Phase Transformations in Compositionally Graded Titanium Alloys.
Banerjee, R. (2003). The Effect of Heat Treatment on the Microstructure of Ti-5Al-5Mo-5V-3Cr-1Fe (Ti-555).
Banerjee, R. (1999). Nanophase and Nanocomposite Materials III.
Banerjee, R. (1999). Processing, Microstructure, and Fracture Behavior of Nickel / Nickel Aluminide Multilayered Thin Films.
Banerjee, R. (1998). Sublattice Occupancies in Ternary B2 Alloys.
Banerjee, R. (1997). Structural Transitions in Ti/Al Nanolayered Thin Films.
Banerjee, R. (1996). Processing of Ti-aluminide thin films and multilayers.
Banerjee, R. (1995). Phase Evolution During Crystallization of Amorphous Titanium Aluminide Thin Films : Effect of Mn and Nb Additions.
Dahotre, N. B., Sharma, S., Joshi, S., Banerjee, R. (2022). Directed Energy Deposition. Other. 23A, . Materials Park, Ohio: ASM International.
Donthula, H., Tewari, R., Vishwanadh, B., Banerjee, R., Banerjee, S. (2021). A Study on the Active Eutectoid Phase Transformations of Ti/Zr--Cu Alloys. Applications of Microscopy in Materials and Life Sciences. 97--104. Springer, Singapore.
Choudhuri, D., Jaeger, D. L., Srivilliputhur, S. G., Gibson, M. A., Banerjee, R. (2015). Creep response of a Zn containing Mg-Nd-La alloy. Magnesium Technology 2015. 35–39. Springer International Publishing.
Borkar, T., Mohseni, H., Hwang, J., Scharf, T. W., Tiley, J., Hong, S. H., Banerjee, R. (2015). Spark Plasma Sintering (SPS) of Carbon Nanotube (CNT)/Graphene Nanoplatelet (GNP)-Nickel Nanocomposites: Structure Property Analysis. Advanced Composites for Aerospace, Marine, and Land Applications II. 53--79. Springer, Cham.
Borkar, T., Gopagoni, S., Banerjee, R., Hwang, J., Tiley, J. (2014). Laser Deposited In-Situ TiC Reinforced Nickel Matrix Composites: Microstructure and Tribological Properties. Advanced Composites for Aerospace, Marine, and Land Applications. 67–79. Springer International Publishing.
Choudhuri, D., Nag, S., Dendge, N., Gibson, M. A., Banerjee, R. (2014). Precipitate Formation in Uniaxially Stressed High Pressure Die Cast Binary Mg-Nd Alloy during Creep Testing. Magnesium Technology 2014. 55–57. Springer International Publishing.
Banerjee, R. (2004). "Structural Transitions in Thin Films" in Dekker Encyclopaedia of Nanoscience and Nanotechnology.
Barua, A. K., Banerjee, R. (1992). Hydrogenated Amorphous Silicon, Its Alloys and Their Device Applications. New Materials. 96--126. Springer Berlin Heidelberg.
Okushi, H., Banerjee, R., Tanaka, K. (1989). Thermally and Light-Induced Changes in the Gap States of P-Doped a-Si: H. Amorphous Silicon and Related Materials: (In 2 Parts). 657--685.
Mantri, S., Choudhuri, D., Cotton, J., Banerjee, R. Influence of Fine Scale Alpha Precipitation on the Mechanical Properties of Beta-21S Commercial Ti Alloy. Proceedings of the 13th World Conference on Titanium. 637--640.
Choudhuri, D., Borkar, T., Banerjee, R., Banerjee, D. Mapping the Decomposition of $\beta$ to $\alpha$ in Composition and Temperature Space in Titanium Alloys. Proceedings of the 13th World Conference on Titanium. 515--519.
Choudhuri, D., Alam, T., Zheng, Y., Shi, R., Srivilliputhur, S., Fraser, H., Banerjee, R. Morphological and Compositional Evolution of Omega Phase Precipitates and its Consequent Influence on Alpha Precipitation in Ti-V Alloys. Proceedings of the 13th World Conference on Titanium. 535--538.
Samimi, P., Ghamarian, I., Brice, D., Kaufman, M., Collins, P. On the Influence of Compositional Variations on the Oxidation Performance and Oxygen-Induced Phase Transformations in Ti-Based Systems. Proceedings of the 13th World Conference on Titanium. 1521--1526.
Zheng, Y., Alam, T., Williams, R. E., Nag, S., Banerjee, R., Fraser, H. L. Structural and Compositional Characteristics of Isothermal Omega Phase in Beta Titanium Alloys. Proceedings of the 13th World Conference on Titanium. 559--562.
Gwalani, H., O'Neill, M. J., Alam, T., Mikler, A. R., Banerjee, R. (2019). Compositional Analysis for Metallic Systems: Sampling Methods. 2019, 303 - 316. Industrial Conference on Data Mining (ICDM) 2019.
Zheng, Y., Sosa, J. M., Williams, R. E., Wang, Y., Banerjee, R., Fraser, H. L. (2016). Development of Ultrafine $\alpha$ Microstructures in a Metastable $\beta$ Titanium Alloy. Proceedings of the 13th World Conference on Titanium. 521--527.
Borkar, T., Nag, S., Tiley, J., Banerjee, R. (2016). Titanium Based Metal-Matrix Composites via In-Situ Nitridation. Proceedings of the 13th World Conference on Titanium. 1311--1316.
Hayes, B. J., Ghamarian, I., Dixit, V., Joshi, S. S., Welk, B., Banerjee, R., Dahotre, N. B., Fraser, H., Collins, P. C. (2015). Characterization of electron beam additive manufactured TI-6AL-4V. SAMPE Baltimore Conference and Exhibition 2015.
Rana, B., Banerjee, S., Chatterjee, P., Banerjee, R., Basak, R. (2015). Design of a CPW-fed spiral ring-loaded miniaturized slot antenna. Computing and Communication (IEMCON), 2015 International Conference and Workshop on. 1–3.
Mogonye, J., Mohseni, H., Gopagoni, S., Hwang, J., Tiley, J., Banerjee, R., Scharf, T. W. (2012). 3-D Focused Ion Beam Serial Sectioning to Determine Solidification and Wear Mechanisms in Adaptive Composites Coatings. AIP Conference Proceedings.
Nandwana, P., Nag, S., Tiley, J., Fraser, H., Banerjee, R. (2012). Effect of Titanium Borides on the Formation of Equiaxed Alpha in Titanium Alloys. AIP Conference Proceedings.
Borkar, T., Hwang, J., Harimkar, S., Tiley, J., Hong, S., Banerjee, R. (2012). Nano-Scale Characterization on the Metal/Carbon Nanotube Interface. AIP Conference Proceedings.
Nag, S., Devaraj, A., Zheng, Y., Williams, R., Tiley, J., Fraser, H., Banerjee, R. (2012). Phase Separation and Its Subsequent Influence on Alpha Nucleation in Titanium Alloys. AIP Conference Proceedings.
Hwang, J., Gopagoni, S., Mahdak, K., Tiley, J., Banerjee, R. (2012). Quantitative Three Dimensional Atom Probe Analysis of In-Situ Tic Reinforced Ni Composite. AIP Conference Proceedings.
Collins, P. C., Samimi, P., Ghamarian, I., Welk, B., Huber, D., Banerjee, R., Fraser, H. (2012). Recent Studies on the Evolution of Microstructure in Ti-Based Alloys. AIP Conference Proceedings.
Nag, S., Devaraj, A., Williams, R., Viswanathan, G., Tiley, J., Fraser, H., Banerjee, R. (2012). Structural and Compositional Transitions Across Interfaces in Titanium Alloys. AIP Conference Proceedings.
Tiley, J., Viswanathan, G., Knox, S., Shiveley, A., Nag, S., Banerjee, R., Fraser, H. (2012). Verification of Site Occupancies in a Nickel Base Superalloy Using Synchrotron and Neutron Diffraction Techniques Coupled with Atomistic Modeling and High Resolution TEM. AIP Conference Proceedings.
Chaudhari, M., Du, J., Tiley, J., Banerjee, R. (2011). Density Functional Theory Based Calculations of Site Occupancy in the Gamma Prime Ni3al Phase of Nickel Based Super Alloys. Proceedings of the 1st World Congress on Integrated Computational Materials Engineering (ICME). 151--157.
Devaraj, A., Gupta, N., Nag, S., Fraser, H., Banerjee, R., Srivilliputhur, S. G. (2011). First Principles Simulations of Beta to Omega Transformation in the Titanium-Molybdenum System. APS Meeting Abstracts.
Chang, W. S., Hwang, J., Han, C. S., Banerjee, R. (2011). Microscopical analysis of the metal/carbon nanotube hybrid interface based on atom probe tomography and electron microscopy. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY. 241, .
Hwang, J., Singh, A., Banerjee, R., Tiley, J., Choi, T. (2009). Processing and thermal conductivity of carbon nanotube-reinforced nickel matrix composites. ASME 2009 Heat Transfer Summer Conference collocated with the InterPACK09 and 3rd Energy Sustainability Conferences. 627--630.
Bose, S., Banerjee, R., Genc, A., Raychaudhuri, P., Ayyub, P. (2006). Metal Insulator Transition in Nanocrystalline Thin Films of Niobium: Classical and Quantum Contributions. AIP Conference Proceedings. 850(1), 1444--1445.
Banerjee, R., Khilar, K. C., Ghosh, B., Patil, K. (2005). Phenol Formaldehyde Gels: Studies on the Gel Formation at a High Temperature and at Different pH. The 2005 Annual Meeting.
Banerjee, R., Ratan, R., Kar, S., Gokhale, M., Shah, A., Bhattacharyya, J., Narasimhan, K., Arora, B., others, (2004). Investigation of GaAs nanowires grown via MOVPE using the Vapour-Liquid-Solid technique. EWMOVPEX. 10th European Workshop on Metalorganic Vapour Phase Epitaxy. 1(1), 41--44.
Sharma, S., BANERJEE, R., Chattopadhyay, S., Barua, A. (2002). Demonstration of surface-saturation effect for porous silicon by hydrogen treatment. SPIE proceedings series. 1444--1447.
Banerjee, R. (2002). In Situ Deposition of Ti-TiB Composites Using LENS™ R. Banerjee, A. Gene, PC Collins, CA Brice*, and HL Fraser Department of Materials Science and Engineering The Ohio State University, Columbus, OH 43210. Proceedings of the 2002 International Conference on Metal Powder Deposition for Rapid Manufacturing. 263.
Banerjee, R. (2001). Biodiversity, Biotechnology \& Intellectual Property Rights: Unpacking the Violence of ‘Sustainable Development’. 19th Standing Conference of Organisational Symbolism (SCOS XIX).
Asta, M., Quong, A. A., Banerjee, R., Fraser, H. L. (1997). Energetics of Ti/Al Multilayers. APS March Meeting Abstracts.
CHATTOPADHYAY, S., DAS, D., SHARMA, S., BANERJEE, R., BARUA, A. (1994). IMPROVED P-LAYER IN HYDROGENATED AMORPHOUS SILICON SOLAR CELLS BY A NOVEL COMBINATION OF RF GLOW DISCHARGE TECHNIQUE AND COIL HEATING. Emerging optoelectronic technologies: proceedings of the Conference on Emerging Optoelectronic Technologies, Bangalore, India, July 18-22, 1994. 203.
BANERJEE, R., BATABYAL, AK BANDYOPAIHYAY SN SHARMA AK,, BARUA, A. (1990). Energy Research Unit, Indian Association for the Cultivation of Science, Calcutta: 700 032, India.. Materials Issues in Microcrystalline Semiconductors: Symposium Held November 29-December 1, 1989, Boston, Massachusetts, USA. 69.
Gangireddy, S., Gwalani, B., Liu, K., Banerjee, R., Mishra, R. S. (2019). Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy (vol 734, pg 42, 2018). Other. 740, 14-15.
Mikler, C. V., Chaudhary, V., Borkar, T., Soni, V., Jaeger, D., Chen, X., Contieri, R., Ramanujan, R. V., Banerjee, R. (2017). Laser Additive Manufacturing of Magnetic Materials (vol 69, pg 532, 2017). JOM. 69(12), 2855-2856.
Ng, H. P., Nandwana, P., Devaraj, A., Semblanet, M., Nag, S., Nakashima, P. N. H.,, Meher, S., Bettles, C. J., Gibson, M. A., Fraser, H. L., Muddle, B. C., Banerjee, R. (2015). Conjugated precipitation of twin-related alpha and Ti2Cu phases in a Ti-25V-3Cu alloy (vol 84, pg 457, 2015). Acta Materialia. 87, 412-412.
Santos-Ortiz, R., Jha, J. K., Rojhirunsakool, T., Dendge, N., Banerjee, R., Shepherd, N. D. (2015). Effect of deposition energy on the microstructure and phase purity of pulsed laser deposited iron fluoride thin films (vol 120, pg 863, 2015). Other. 120(3), 1219-1219.
Conner, B., Essel, S., Paul, S., Wertheim, R., Pasang, T., Butcher, Dennis P., Jr.,, Zeidler, H., Dahotre, N. B., Pande, S., Banerjee, R., Cuesta-Lopez, S., Babcsan, N., Solomon, V. (2019). Technological Innovations in Metals Engineering. JOM. 71(2), 651-654.
Reddy, S., Banerjee, R., Park, D. An Investigation into Hydroxyapatite Coated Ti-35Nb-7Zr-5Ta for Bio-medical Applications..
Banerjee, R. D. Choudhuri, N. Dendge, S. Nag, S. Meher, T. Alam, MA Gibson \&.
Zheng, Y., Williams, R., Choudhuri, D., Alam, T., Banerjee, R., Banerjee, D., Fraser, H. ON THE MECHANISM OF NUCLEATION AND GROWTH OF OMEGA PHASE IN BETA TITANIUM ALLOYS.
Patil, S., Mani Krishna, K., Sharma, S., Joshi, S. S., Radhakrishnan, M., Banerjee, R., Dahotre, N. B. (2024). Thermo-mechanical process variables driven microstructure evolution during additive friction stir deposition of IN625. Additive Manufacturing.
Chesetti, A., Banerjee, S., Dasari, S., Nartu, M. S., Varahabhatla, S., Sharma, A., Ramakrishnan, A., Satko, D., Gorsse, S., Salem, A., others, (2023). 3D printable low density B2+ BCC refractory element based complex concentrated alloy with high compressive strength and plasticity. Scripta Materialia. 225, 115160. Pergamon.
Dahotre, N. B., Mishra, R., Banerjee, R. (2023). 6 Hierarchical phase evolution during direct laser deposition of an in-situ Ni-NbC composite. Scripta Materialia. 226, .
Shahzamanian, M., Banerjee, R., Dahotre, N. B., Srinivasa, A. R., Reddy, J. (2023). Analysis of stress shielding reduction in bone fracture fixation implant using functionally graded materials. Other. 117262. Elsevier.
Sharma, A., Dasari, S., Soni, V., Kloenne, Z., Couzini\'e, Jean-Philippe,, Senkov, O. N., Miracle, D. B., Srinivasan, S. G., Fraser, H., Banerjee, R. (2023). B2 to ordered omega transformation during isothermal annealing of refractory high entropy alloys: Implications for high temperature phase stability. Journal of Alloys and Compounds. 953, 170065. Elsevier.
Dasari, S., Sharma, A., Soni, V., Kloenne, Z., Fraser, H., Banerjee, R. (2023). Crystallographic and compositional evolution of ordered B2 and disordered BCC phases during isothermal annealing of refractory high-entropy alloys. Microscopy and Microanalysis. 29(1), 303--313. Oxford University Press US.
Radhakrishnan, M., McKinstry, M., Chaudhary, V., Nartu, M., Krishna, K. M., Ramanujan, R., Banerjee, R., Dahotre, N. B. (2023). Effect of chromium variation on evolution of magnetic properties in laser direct energy additively processed CoCrxFeNi alloys. Scripta Materialia. 226, 115269. Pergamon.
Dasari, S., Sharma, A., Jiang, C., Gwalani, B., Lin, W., Lo, K., Gorsse, St\'ephane,, Yeh, A., Srinivasan, S. G., Banerjee, R. (2023). Exceptional enhancement of mechanical properties in high-entropy alloys via thermodynamically guided local chemical ordering. Proceedings of the National Academy of Sciences. 120(23), e2211787120. National Academy of Sciences.
Gaddam, S., Nartu, Mohan Sai Kiran Kumar Yadav,, Chesetti, A., Mantri, S. A., Mishra, R. S., Dahotre, N. B., Banerjee, R. (2023). Hierarchical phase evolution during direct laser deposition of an in-situ Ni-NbC composite. Scripta Materialia. 226, 115225. Pergamon.
Chen, S., Liu, P., Pei, Q., Yu, Z. G., Aitken, Z. H., Li, W., Wu, Z., Banerjee, R., Srolovitz, D. J., Liaw, P. K., others, (2023). Ideal plasticity and shape memory of nanolamellar high-entropy alloys. Science Advances. 9(41), eadi5817. American Association for the Advancement of Science.
Varahabhatla, S. M., Nartu, Mohan Sai Kiran Kumar Yadav,, Mantri, S. A., Chaudhary, V., Krishna, K. M., Joshi, S. S., Ramanujan, R. V., Dahotre, N. B., Banerjee, R. (2023). Influence of energy density on the microstructure, growth orientation, and anisotropy of magnetic properties in additively manufactured Fe-3.8 wt\% Si transformer steels. Materialia. 30, 101854. Elsevier.
Sharma, A., Dasari, S., Ingale, T., Jiang, C., Gwalani, B., Srinivasan, S. G., Banerjee, R. (2023). Introducing local chemical ordering to trigger a planar-slip-initiated strain-hardening mechanism in high entropy alloys. Acta Materialia. 258, 119248. Pergamon.
Sharma, S., Krishna, K. M., Joshi, S. S., Radhakrishnan, M., Palaniappan, S., Dussa, S., Banerjee, R., Dahotre, N. B. (2023). Laser based additive manufacturing of tungsten: Multi-scale thermo-kinetic and thermo-mechanical computational model and experiments. Acta Materialia. 259, 119244. Pergamon.
Chesetti, A., Banerjee, S., Dasari, S., Varahabhatla, S., Sharma, A., Mantri, S. A., Nartu, Mohan Sai Kiran Kumar Yadav,, Dahotre, N. B., Banerjee, R. (2023). Laser powder bed fusion processing of a precipitation strengthenable FCC based high entropy alloy. Other. 6, 100140. Elsevier.
Krishna, K. M., Madhavan, R., Pantawane, M. V., Banerjee, R., Dahotre, N. B. (2023). Machine learning based de-noising of electron back scatter patterns of various crystallographic metallic materials fabricated using laser directed energy deposition. Ultramicroscopy. 247, 113703. North-Holland.
Karri, M., Radhakrishnan, M., Pantawane, M., Banerjee, R., Dahotre, N. Machine learning based de-noising of electron back scatter patterns of various crystallographic metallic materials fabricated using laser directed energy deposition. Ultramicroscopy.
Chaudhary, V., Nartu, M., Dasari, S., Varahabhatla, S., Sharma, A., Radhakrishnan, M., Mantri, S. A., Gorsse, St\'ephane,, Dahotre, N., Ramanujan, R. V., others, (2023). Magnetic and mechanical properties of additively manufactured Alx (CoFeNi) complex concentrated alloys. Scripta Materialia. 224, 115149. Pergamon.
Senkov, O., Crossman, B., Rao, S., Couzinie, J., Miracle, D., Butler, T., Banerjee, R., Mills, M. (2023). Mechanical properties of an Al10Nb20Ta15Ti30V5Zr20 A2/B2 refractory superalloy and its constituent phases. Acta Materialia. 254, 119017. Pergamon.
Qian, B., Mantri, S. A., Dasari, S., Zhang, J., Lilensten, L., Sun, F., Vermaut, P., Banerjee, R., Prima, Fr\'ed\'eric, (2023). Mechanisms underlying enhanced strength-ductility combinations in TRIP/TWIP Ti-12Mo alloy engineered via isothermal omega precipitation. Acta Materialia. 245, 118619. Pergamon.
Nartu, Mohan Sai Kiran Kumar Yadav,, Jha, S., Chesetti, A., Mukherjee, S., Van Rooyen, I., Banerjee, R. (2023). Microstructure and Temperature Dependent Indentation Response of Additively Manufactured Precipitation-Strengthened Al0. 3Ti0. 2Co0. 7CrFeNi1. 7 High Entropy Alloy. JOM. 75(12), 5046--5054. Springer US New York.
Nartu, Mohan Sai Kiran Kumar Yadav,, Jha, S., Chesetti, A., Mukherjee, S., Van Rooyen, I., Banerjee, R. (2023). Microstructure and Temperature Dependent Indentation Response of Additively Manufactured Precipitation-Strengthened Al0. 3Ti0. 2Co0. 7CrFeNi1. 7 High Entropy Alloy. JOM. 75(12), 5046--5054. Springer US New York.
Dasari, S., Sharma, A., Gorsse, St\'ephane,, Chesetti, A., Banerjee, R. (2023). Non-classical nucleation of ordered L12 precipitates in the FCC based Al0. 25CoFeNi high entropy alloy. Journal of Applied Physics. 134(1), . AIP Publishing.
Jha, S., Sharma, A., Dasari, S., Muskeri, S., Banerjee, R., Mukherjee, S. (2023). Orientation dependent stress-induced martensitic and omega transformations in a refractory high entropy alloy. Materialia. 28, 101741. Elsevier.
Jha, S., Sharma, A., Dasari, S., Muskeri, S., Banerjee, R., Mukherjee, S. (2023). Orientation dependent stress-induced martensitic and omega transformations in a refractory high entropy alloy. Materialia. 28, 101741. Elsevier.
Mantri, S., Dasari, S., Sharma, A., Zheng, Y., Fraser, H., Banerjee, R. (2023). Role of Aluminum rejection from isothermal $\omega$ precipitates on the formation of $\alpha$ precipitates in the metastable $\beta$-titanium alloy Ti-10V-2Fe-3Al. Scripta Materialia. 234, 115565. Pergamon.
Kov\'acs, Andr\'as,, Venkataraman, N. B., Chaudhary, V., Dasari, S., Denneulin, T., Ramanujan, R., Banerjee, R., Dunin-Borkowski, R. E. (2023). Role of heterophase interfaces on local coercivity mechanisms in the magnetic Al0. 3CoFeNi complex concentrated alloy. Acta Materialia. 246, 118672. Pergamon.
Nartu, Mohan Sai Kiran Kumar Yadav,, Banerjee, S., Chesetti, A., Rodriguez, J., Yadav, S., Scharf, T. W., Banerjee, R. (2023). Solid-state reaction mediated microstructural evolution in a spark plasma sintered in situ Ti--B4C composite. Materials Science and Engineering: A. 885, 145601. Elsevier.
Nartu, M. S., Welk, B. A., Mantri, S. A., Taylor, N. L., Viswanathan, G. B., Dahotre, N. B., Banerjee, R., Fraser, H. L. (2023). Underlying factors determining grain morphologies in high-strength titanium alloys processed by additive manufacturing. Nature Communications. 14(1), 3288. Nature Publishing Group UK London.
Shi, R., Choudhuri, D., Kashiwar, A., Dasari, S., Wang, Y., Banerjee, R., Banerjee, D. (2022). $\alpha$ phase growth and branching in titanium alloys. Philosophical Magazine. 102(5), 389--412. Taylor \& Francis.
Joshi, S. S., Sharma, S., Radhakrishnan, M., Pantawane, M. V., Patil, S. M., Jin, Y., Yang, T., Riley, D. A., Banerjee, R., Dahotre, N. B. (2022). A multi modal approach to microstructure evolution and mechanical response of additive friction stir deposited AZ31B Mg alloy. Scientific Reports. 12(1), 13234. Nature Publishing Group UK London.
Sharma, S., Krishna, K. M., Radhakrishnan, M., Pantawane, M. V., Patil, S. M., Joshi, S. S., Banerjee, R., Dahotre, N. B. (2022). A pseudo thermo-mechanical model linking process parameters to microstructural evolution in multilayer additive friction stir deposition of magnesium alloy. Other. 224, 111412. Elsevier.
Joshi, S. S., Patil, S. M., Mazumder, S., Sharma, S., Riley, D. A., Dowden, S., Banerjee, R., Dahotre, N. B. (2022). Additive friction stir deposition of AZ31B magnesium alloy. Other. 10(9), 2404--2420. Elsevier.
Dasari, S., Soni, V., Sharma, A., Senkov, O., Miracle, D., Fraser, H., Wang, Y., Banerjee, R. (2022). Concomitant clustering and ordering leading to B2+ BCC microstructures in refractory high entropy alloys. Transactions of the Indian Institute of Metals. 75(4), 907--916. Springer India.
Dasari, S., Sharma, A., Soni, V., Kloenne, Z., Fraser, H., Banerjee, R. (2022). Crystallographic and compositional evolution of ordered B2 and disordered BCC phases during isothermal annealing of refractory high-entropy alloys. Microscopy and Microanalysis. 1--11. Cambridge University Press.
Joshi, S. S., Sharma, A., Sharma, S., Mazumder, S., Pantawane, M. V., Mantri, S. A., Banerjee, R., Dahotre, N. B. (2022). Cyclic thermal dependent microstructure evolution during laser directed energy deposition of H13 steel. Transactions of the Indian Institute of Metals. 75(4), 1007--1014. Springer India New Delhi.
Nartu, M., Chesetti, A., Dasari, S., Sharma, A., Mantri, S., Dahotre, N., Banerjee, R. (2022). Engineering heterogeneous microstructures in additively manufactured high entropy alloys for high strength and strain hardenability. Materials Science and Engineering: A. 849, 143505. Elsevier.
Couzini\'e, Jean-Philippe,, Heczko, M., Maz\'anov\'a, Veronika,, Senkov, O. N., Ghazisaeidi, M., Banerjee, R., Mills, M. J. (2022). High-temperature deformation mechanisms in a BCC+ B2 refractory complex concentrated alloy. Acta Materialia. 233, 117995. Pergamon.
Lan, Q., Kov\'acs, Andr\'as,, Caron, J., Du, H., Song, D., Dasari, S., Gwalani, B., Chaudhary, V., Ramanujan, R. V., Banerjee, R., others, (2022). Highly complex magnetic behavior resulting from hierarchical phase separation in AlCo (Cr) FeNi high-entropy alloys. iScience. 25(4), 104047. Elsevier.
Nartu, M., Sharma, A., Mantri, S., Haridas, R., Ren, Y., Banerjee, R. (2022). Increasing the yield strength while preserving strain hardenability and ductility in a beta titanium alloy exhibiting transformation induced plasticity (TRIP). Scripta Materialia. 219, 114890. Pergamon.
Dahotre, N. B., Banerjee, R. (2022). Magnetic and Mechanical Properties of Additively Manufactured Alx(CoFeNi) Complex Concentrated Alloys. Scripta Materialia. (https://doi.org/10.1016/j.scriptamat.2022.115149), .
Zheng, Y., Banerjee, R., Wang, Y., Fraser, H., Banerjee, D. (2022). Pathways to Titanium Martensite. Transactions of the Indian Institute of Metals. 75(4), 1051--1068. Springer India.
Kwasniak, P., Sun, F., Mantri, S., Banerjee, R., Prima, F. (2022). Polymorphic nature of $\{$332$\}$< 113> twinning mode in BCC alloys. Materials Research Letters. 10(5), 334--342. Taylor \& Francis.
Yun, D., Chae, H., Lee, T., Lee, D., Ryu, H. J., Banerjee, R., Harjo, S., Kawasaki, T., Lee, S. Y. (2022). Stress contribution of B2 phase in Al0. 7CoCrFeNi eutectic high entropy alloy. Journal of Alloys and Compounds. 918, 165673. Elsevier.
Ellyson, B., Fezzaa, K., Sun, T., Parab, N., Saville, A., Finfrock, C., Rietema, C., Smith, D., Copley, J., Johnson, C., others, (2022). Transformation and twinning induced plasticity in metastable Ti-Mo alloys under high strain rate deformation. Materials Science and Engineering: A. 857, 143716. Elsevier.
Mantri, S. A., Nartu, M., Dasari, S., Sharma, A., Agarwal, P., Salloom, R., Sun, F., Ivanov, E., Cho, K., McWilliams, B., Srivilliputhur, S. G., Dahotre, N., Prima,, Banerjee, R. (2021). Suppression and Reactivation of Transformation and Twinning Induced Plasticity in Laser Powder Bed Fusion Additively Manufactured Ti-10V-2Fe-3Al. Progress in Additive Manufacturing. No. 48, 102406. Elsevier. https://www.sciencedirect.com/science/article/abs/pii/S2214860421005595
Shi, R., Choudhuri, D., Kashiwar, A., Dasari, S., Wang, Y., Banerjee, R., Banerjee, D. (2021). $\alpha$ phase growth and branching in titanium alloys. Philosophical Magazine. 1--24. Taylor \& Francis.
Chaudhary, V., Chaudhary, R., Banerjee, R., Ramanujan, R. (2021). Accelerated and conventional development of magnetic high entropy alloys. Materials Today. Elsevier.
Chen, S., Aitken, Z. H., Pattamatta, S., Wu, Z., Yu, Z. G., Banerjee, R., Srolovitz, D. J., Liaw, P. K., Zhang, Y. (2021). Chemical-Affinity Disparity and Exclusivity Drive Atomic Segregation, Short-Range Ordering, and Cluster Formation in High-Entropy Alloys. Acta Materialia. 206, 116638. Pergamon.
Pantawane, M. V., Sharma, S., Sharma, A., Dasari, S., Banerjee, S., Banerjee, R., Dahotre, N. B. (2021). Coarsening of martensite with multiple generations of twins in laser additively manufactured Ti6Al4V. Acta Materialia. 213, 116954. Pergamon.
Feenstra, D., Banerjee, R., Fraser, H., Huang, A., Molotnikov, A., Birbilis, N. (2021). Critical review of the state of the art in multi-material fabrication via directed energy deposition. Other. 25(4), 100924. Elsevier.
Pantawane, M. V., Yang, T., Jin, Y., Joshi, S. S., Dasari, S., Sharma, A., Krokhin, A., Srinivasan, S. G., Banerjee, R., Neogi, A., others, (2021). Crystallographic texture dependent bulk anisotropic elastic response of additively manufactured Ti6Al4V. Scientific Reports. 11(1), 1--10. Nature Publishing Group.
Pantawane, M. V., Yang, T., Jin, Y., Joshi, S. S., Dasari, S., Sharma, A., Krokhin, A., Srinivasan, S. G., Banerjee, R., Neogi, A., others, (2021). Crystallographic texture dependent bulk anisotropic elastic response of additively manufactured Ti6Al4V. Scientific Reports. 11(1), 1--10. Nature Publishing Group.
Nartu, M., Torgerson, T., Mantri, S., Banerjee, R., Scharf, T. (2021). Directed energy deposition of Ni-Al-Cr-C composites: Microstructural evolution during solidification and wear. Other. 42, 102000. Elsevier.
Nartu, M., Torgerson, T. B., Mantri, S. A., Banerjee, R., Scharf, T. W. (2021). Directed Energy Deposition of Ni-Al-Cr-C Composites: Microstructural Evolution during Solidification and Wear. Other. 42, 102000.
Dasari, S., Chang, Y., Jagetia, A., Soni, V., Sharma, A., Gwalani, B., Gorsse, St\'ephane,, Yeh, A., Banerjee, R. (2021). Discontinuous precipitation leading to nano-rod intermetallic precipitates in an Al0. 2Ti0. 3Co1. 5CrFeNi1. 5 high entropy alloy results in an excellent strength-ductility combination. Materials Science and Engineering: A. 805, 140551. Elsevier.
Mantri, S. A., Dasari, S., Sharma, A., Alam, T., Pantawane, M. V., Pole, M., Sharma, S., Dahotre, N. B., Banerjee, R., Banerjee, S. (2021). Effect of micro-segregation of alloying elements on the precipitation behaviour in laser surface engineered Alloy 718. Acta Materialia. 210, 116844. Pergamon.
Al Shenawa, A., Argade, G., Chilukuri, A., DÕSouza, N. A., Nasrazadani, S., Scharf, T. W., Banerjee, R. (2021). Effect of supercritical CO2 on salt water corrosion and wear resistance of bismaleimide coating filled with organophilic montmorillonite clay. Other. 1--18. Taylor \& Francis.
Al-Shenawa, A., Argade, G., Chilukuri, A., D'Souza, N. A., Nasrazadani, S., Scharf, T. W., Banerjee, R. (2021). Effect of supercritical CO2 on salt water corrosion and wear resistance of bismaleimide coating filled with organophilic montmorillonite clay. Other. 1-18. Taylor & Francis. https://doi.org/10.1080/01694243.2021.1884353
Sharma, A., Soni, V., Dasari, S., Mantri, S., Zheng, Y., Fraser, H., Banerjee, R. (2021). Fine scale alpha precipitation in Ti-19at.\% v in the absence of influence from omega precipitates. Scripta Materialia. 196, 113766. Pergamon.
Salloom, R., Mantri, S. A., Banerjee, R., Srinivasan, S. (2021). First principles computation of composition dependent elastic constants of omega in titanium alloys: implications on mechanical behavior. Scientific Reports. 11(1), 1--21. Nature Publishing Group.
Srimark, K., Dasari, S., Sharma, A., Wangyao, P., Gwalani, B., Rojhirunsakool, T., Gorsse, St\'ephane,, Banerjee, R. (2021). Hierarchical phase evolution in a lamellar Al0. 7CoCrFeNi high entropy alloy involving competing metastable and stable phases. Scripta Materialia. 204, 114137. Pergamon.
Gwalani, B., Dasari, S., Sharma, A., Soni, V., Shukla, S., Jagetia, A., Agrawal, P., Mishra, R. S., Banerjee, R. (2021). High density of strong yet deformable intermetallic nanorods leads to an excellent room temperature strength-ductility combination in a high entropy alloy. Acta Materialia. 219, 117234. Pergamon.
Lan, Q., Kov\'acs, Andr\'as,, Caron, J., Du, H., Song, D., Dasari, S., Gwalani, B., Chaudhary, V., Ramanujan, R. V., Banerjee, R., others, (2021). Highly Complex Magnetic Structures Resulting From Hierarchical Phase Separation in AlCo (Cr) FeNi High Entropy Alloys. Other.
Gwalani, B., Torgerson, T., Dasari, S., Jagetia, A., Nartu, M., Gangireddy, S., Pole, M., Wang, T., Scharf, T., Banerjee, R. (2021). Influence of fine-scale B2 precipitation on dynamic compression and wear properties in hypo-eutectic Al0. 5CoCrFeNi high-entropy alloy. Journal of Alloys and Compounds. 853, 157126. Elsevier.
Nartu, Mohan Sai Kiran Kumar Yadav,, Flannery, D., Mazumder, S., Mantri, S. A., Joshi, S. S., Ayyagari, A. V., McWilliams, B., Cho, K., Dahotre, N. B., Banerjee, R. (2021). Influence of Process Parameters on Mechanical and Corrosion Behavior of DED-Processed Biomedical Ti-35Nb-7Zr-5Ta Alloy. JOM. 73(6), 1819--1827. Springer US.
Sharma, A., Gwalani, B., Dasari, S., Choudhuri, D., Chang, Y., Gorsse, S., Yeh, A., Banerjee, R. (2021). Insights into Defect-Mediated Nucleation of Equilibrium B2 Phase in Face-Centered Cubic High-Entropy Alloys. JOM. 1--12. Springer US.
Nartu, M., Dasari, S., Sharma, A., Mantri, S., Sharma, S., Pantawane, M. V., McWilliams, B., Cho, K., Dahotre, N. B., Banerjee, R. (2021). Omega versus alpha precipitation mediated by process parameters in additively manufactured high strength Ti--1Al--8V--5Fe alloy and its impact on mechanical properties. Materials Science and Engineering: A. 141627. Elsevier.
Miao, J., Slone, C., Dasari, S., Ghazisaeidi, M., Banerjee, R., George, E. P., Mills, M. J. (2021). Ordering effects on deformation substructures and strain hardening behavior of a CrCoNi based medium entropy alloy. Acta Materialia. 210, 116829. Pergamon.
Jagetia, A., Nartu, M., Dasari, S., Sharma, A., Gwalani, B., Banerjee, R. (2021). Ordering-mediated local nano-clustering results in unusually large Hall-Petch strengthening coefficients in high entropy alloys. Materials Research Letters. 9(5), 213--222. Taylor \& Francis.
Ma, K., Zheng, Y., Dasari, S., Zhang, D., Fraser, H. L., Banerjee, R. (2021). Precipitation in nanostructured alloys: A brief review. Other. 1--8. Springer International Publishing.
Nartu, M., Pole, M., Mantri, S. A., Haridas, R. S., Scharf, T. W., McWilliams, B., Cho, K., Mukherjee, S., Dahotre, N. B., Banerjee, R. (2021). Process Induced Multi-layered Titanium – Boron Carbide Composites via Additive Manufacturing. Other. 46, 102156.
Nartu, M., Pole, M., Mantri, S., Haridas, R., Scharf, T., McWilliams, B., Cho, K., Mukherjee, S., Dahotre, N. B., Banerjee, R. (2021). Process induced multi-layered Titanium--Boron carbide composites via additive manufacturing. Other. 46, 102156. Elsevier.
Nartu, M., Pole, M., Mantri, S., Haridas, R., Scharf, T., McWilliams, B., Cho, K., Mukherjee, S., Dahotre, N. B., Banerjee, R. (2021). Process induced multi-layered Titanium--Boron carbide composites via additive manufacturing. Other. 46, 102156. Elsevier.
Dasari, S., Sharma, A., Byers, T. A., Glass, G. A., Srivilliputhur, S. G., Rout, B., Banerjee, R. (2021). Proton irradiation induced chemical ordering in an Al0. 3CoFeNi high entropy alloy. Applied Physics Letters. 119(16), 161907. AIP Publishing LLC.
Dasari, S., Sarkar, A., Sharma, A., Gwalani, B., Choudhuri, D., Soni, V., Manda, S., Samajdar, I., Banerjee, R. (2021). Recovery of cold-worked Al0. 3CoCrFeNi complex concentrated alloy through twinning assisted B2 precipitation. Acta Materialia. 202, 448--462. Pergamon.
Nartu, M., Dasari, S., Sharma, A., Chaudhary, V., Varahabhatla, S., Mantri, S., Ivanov, E., Ramanujan, R., Dahotre, N., Banerjee, R. (2021). Reducing coercivity by chemical ordering in additively manufactured soft magnetic Fe--Co (Hiperco) alloys. Journal of Alloys and Compounds. 861, 157998. Elsevier.
Pantawane, M. V., Sharma, S., Dasari, S., Mantri, S. A., Sharma, A., Banerjee, R., Banerjee, S., Dahotre, N. B. (2021). Spatial Variation of Thermokinetics and Associated Microstructural Evolution in Laser Surface Engineered IN718: Precursor to Additive Manufacturing. Metallurgical and Materials Transactions A. 52(6), 2344--2360. Springer US.
Patil, A., Nartu, Mohan Sai Kiran Kumar Yadav,, Ozdemir, F., Banerjee, R., Gupta, R. K., Borkar, T. (2021). Strengthening effects of multi-walled carbon nanotubes reinforced nickel matrix nanocomposites. Journal of Alloys and Compounds. 876, 159981. Elsevier.
Mantri, S., Nartu, M., Dasari, S., Sharma, A., Agrawal, P., Salloom, R., Sun, F., Ivanov, E., Cho, K., McWilliams, B., others, (2021). Suppression and reactivation of transformation and twinning induced plasticity in laser powder bed fusion additively manufactured Ti-10V-2Fe-3Al. Other. 48, 102406. Elsevier.
Pantawane, M. V., Yang, T., Jin, Y., Mazumder, S., Pole, M., Dasari, S., Krokhin, A., Neogi, A., Mukherjee, S., Banerjee, R., others, (2021). Thermomechanically influenced dynamic elastic constants of laser powder bed fusion additively manufactured Ti6Al4V. Materials Science and Engineering: A. 811, 140990. Elsevier.
Pantawane, M. V., Yang, T., Jin, Y., Mazumder, S., Pole, M., Dasari, S., Krokhin, A., Neogi, A., Mukherjee, S., Banerjee, R., others, (2021). Thermomechanically influenced dynamic elastic constants of laser powder bed fusion additively manufactured Ti6Al4V. Materials Science and Engineering: A. 811, 140990. Elsevier.
Dasari, S., Jagetia, A., Sharma, A., Nartu, M., Soni, V., Gwalani, B., Gorsse, St\'ephane,, Banerjee, R. (2021). Tuning the degree of chemical ordering in the solid solution of a complex concentrated alloy and its impact on mechanical properties. Acta Materialia. 212, 116938. Pergamon.
Gwalani, B., Torgerson, T. T., Dasari, S., Jagetia, A., Nartu, M., Gangireddy, S., Pole, M., Wang, T., Scharf, T. W., Banerjee, R. (2021). Influence of fine-scale B2 precipitation on dynamic compression and wear properties in hypo-eutectic Al0. 5CoCrFeNi high-entropy alloy. Journal of Alloys and Compounds. 853, 157126.
Dasari, S., Sharma, A., Byers, T. A., Glass, G. A., Srivilliputhur, S., Rout, B., Banerjee, R. (2021). Proton irradiation induced chemical ordering in an Al0.3CoFeNi high entropy alloy. Applied Physics Letters. 119, 161907. College Park, MD: American Institute of Physics. https://aip.scitation.org/doi/pdf/10.1063/5.0065875
Salloom, R., Mantri, S. A., Banerjee, R., Srivilliputhur, S. G. (2021). First principles computation of composition dependent elastic constants of omega in titanium alloys: implications on mechanical behavior. Scientific Reports. No. 11, 12005. https://www.nature.com/articles/s41598-021-91594-5
Pantwane, M., Yang, T., Jin, Y., Joshi, S., Dasari, S., A., Krokhin, A., Srivilliputhur, S. G., Banerjee, R., Neogi, A., Dahotre, N. (2021). Crystallographic texture dependent bulk anisotropic elastic response of additively manufactured Ti6Al4V. Scientific Reports. No. 11, 633. https://www.nature.com/articles/s41598-020-80710-6
Al-Shenawa, A., D'Souza, N. A., Nasrazadani, S., Argade, G., Scharf, T. W., Banerjee, R. (2021). Effect of Supercritical CO2 on Salt water Corrosion and Wear Resistance of Bismaleimide Coating Filled with Organophilic Montmorillonite Clay.
Thomas, J., Mogonye, J., Mantri, S., Choudhuri, D., Banerjee, R., Scharf, T. (2020). Additive manufacturing of compositionally graded laser deposited titanium-chromium alloys. Other. 33, 101132. Elsevier.
Thomas, J., Mogonye, J., Mantri, S. A., Choudhuri, D., Banerjee, R., Scharf, T. W. (2020). Additive Manufacturing of Compositionally Graded Laser Deposited Titanium-Chromium Alloys. Other. 33, 101132.
Chaudhary, V., Yadav, Nartu Mohan Sai Kiran Kumar,, Mantri, S. A., Dasari, S., Jagetia, A., Ramanujan, R., Banerjee, R. (2020). Additive manufacturing of functionally graded Co--Fe and Ni--Fe magnetic materials. Journal of Alloys and Compounds. 153817. Elsevier.
Chaudhary, V., Yadav, Nartu Mohan Sai Kiran Kumar,, Mantri, S. A., Dasari, S., Jagetia, A., Ramanujan, R., Banerjee, R. (2020). Additive manufacturing of functionally graded Co--Fe and Ni--Fe magnetic materials. Journal of Alloys and Compounds. 823, 153817. Elsevier.
Kwok, T., Rahman, K., Xu, X., Bantounas, I., Kelleher, J., Dasari, S., Alam, T., Banerjee, R., Dye, D. (2020). Design of a high strength, high ductility 12 wt\% Mn medium manganese steel with hierarchical deformation behaviour. Materials Science and Engineering: A. 782, 139258. Elsevier.
Dasari, S., Chang, Y., Jagetia, A., Soni, V., Sharma, A., Gwalani, B., Gorsse, S., Yeh, A., Banerjee, R. (2020). Discontinuous precipitation leading to nano-rod intermetallic precipitates in an Al0. 2Ti0. 3Co1. 5CrFeNi1. 5 high entropy alloy results in an excellent strength-ductility combination. Materials Science and Engineering: A. 140551. Elsevier.
Gwalani, B., Wang, T., Jagetia, A., Gangireddy, S., Muskeri, S., Mukherjee, S., Lloyd, J. T., Banerjee, R., Mishra, R. S. (2020). Dynamic Shear Deformation of a Precipitation Hardened Al0. 7CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry. Other. 22(4), 431. Multidisciplinary Digital Publishing Institute.
Dasari, S., Jagetia, A., Chang, Y., Soni, V., Gwalani, B., Gorsse, St\'ephane,, Yeh, A., Banerjee, R. (2020). Engineering multi-scale B2 precipitation in a heterogeneous FCC based microstructure to enhance the mechanical properties of a Al0. 5Co1. 5CrFeNi1. 5 high entropy alloy. Journal of Alloys and Compounds. 830, 154707. Elsevier.
Chen, S., Aitken, Z. H., Wu, Z., Yu, Z., Banerjee, R., Zhang, Y. (2020). Hall-Petch and inverse Hall-Petch relations in high-entropy CoNiFeAlxCu1-x alloys. Materials Science and Engineering: A. 773, 138873. Elsevier.
Dasari, S., Gwalani, B., Jagetia, A., Soni, V., Gorsse, St\'ephane,, Banerjee, R. (2020). Hierarchical Eutectoid Nano-lamellar Decomposition in an Al 0.3 CoFeNi Complex Concentrated Alloy. Scientific Reports. 10(1), 1--15. Nature Publishing Group.
Dasari, S., Chaudhary, V., Gwalani, B., Jagetia, A., Soni, V., Gorsse, S., Ramanujan, R. V., Banerjee, R. (2020). Highly tunable magnetic and mechanical properties in an Al0. 3CoFeNi complex concentrated alloy. Materialia. 12, 100755. Elsevier.
Nartu, Mohan Sai Kiran Kumar Yadav,, Mantri, S. A., Pantawane, M. V., Ho, Y., McWilliams, B., Cho, K., Dahotre, N. B., Banerjee, R. (2020). In situ reactions during direct laser deposition of Ti-B4C composites. Scripta Materialia. 183, 28--32. Pergamon.
Chaudhary, V., Soni, V., Gwalani, B., Ramanujan, R. V., Banerjee, R. (2020). Influence of non-magnetic Cu on enhancing the low temperature magnetic properties and Curie temperature of FeCoNiCrCu (x) high entropy alloys. Scripta Materialia. 182, 99--103. Pergamon.
Mantri, S., Alam, T., Zheng, Y., Williams, J., Banerjee, R. (2020). Influence of Post Deposition Annealing on Microstructure and Properties of Laser Additively Manufactured Titanium Copper Alloys. Other. 101067. Elsevier.
Mantri, S., Alam, T., Zheng, Y., Williams, J., Banerjee, R. (2020). Influence of post deposition annealing on microstructure and properties of laser additively manufactured titanium copper alloys. Other. 32, 101067. Elsevier.
Gwalani, B., Choudhuri, D., Liu, K., Lloyd, J., Mishra, R., Banerjee, R. (2020). Interplay between single phase solid solution strengthening and multi-phase strengthening in the same high entropy alloy. Materials Science and Engineering: A. 771, 138620. Elsevier.
Nartu, M., Jagetia, A., Chaudhary, V., Mantri, S., Ivanov, E., Dahotre, N., Ramanujan, R., Banerjee, R. (2020). Magnetic and mechanical properties of an additively manufactured equiatomic CoFeNi complex concentrated alloy. Scripta Materialia. 187, 30--36. Pergamon.
Soni, V., Gwalani, B., Alam, T., Dasari, S., Zheng, Y., Senkov, O. N., Miracle, D., Banerjee, R. (2020). Phase inversion in a two-phase, BCC+ B2, refractory high entropy alloy. Acta Materialia. 185, 89--97. Pergamon.
Soni, V., Senkov, O., Couzinie, J., Zheng, Y., Gwalani, B., Banerjee, R. (2020). Phase stability and microstructure evolution in a ductile refractory high entropy alloy Al10Nb15Ta5Ti30Zr40. Other. 9, 100569. Elsevier.
Pantawane, M. V., Dasari, S., Mantri, S. A., Banerjee, R., Dahotre, N. B. (2020). Rapid thermokinetics driven nanoscale vanadium clustering within martensite laths in laser powder bed fused additively manufactured Ti6Al4V. Materials Research Letters. 8(10), 383--389. Taylor \& Francis.
Nartu, M., Dasari, S., Sharma, A., Chaudhary, V., Varahabhatla, S., Mantri, S., Ivanov, E., Ramanujan, R., Dahotre, N., Banerjee, R. (2020). Reducing coercivity by chemical ordering in additively manufactured soft magnetic Fe--Co (Hiperco) alloys. Journal of Alloys and Compounds. 157998. Elsevier.
Miracle, D. B., Tsai, M., Senkov, O. N., Soni, V., Banerjee, R. (2020). Refractory high entropy superalloys (RSAs). Scripta Materialia. 187, 445--452. Pergamon.
Chaudhary, V., Mantri, S., Ramanujan, R., Banerjee, R. (2020). sAdditive Manufacturing of Magnetic Materials. Other. 100688. Pergamon.
Zheng, Y., Antonov, S., Feng, Q., Banerjee, R., Banerjee, D., Fraser, H. L. (2020). Shuffle-induced modulated structure and heating-induced ordering in the metastable $\beta$-titanium alloy, Ti-5Al-5Mo-5V-3Cr. Scripta Materialia. 176, 7--11. Pergamon.
Senkov, O., Couzinie, J., Rao, S., Soni, V., Banerjee, R. (2020). Temperature dependent deformation behavior and strengthening mechanisms in a low density refractory high entropy alloy Al10Nb15Ta5Ti30Zr40. Materialia. 9, 100627. Elsevier.
Nartu, M., Alam, T., Dasari, S., Mantri, S., Gorsse, S., Siller Carrillo, H. R., Dahotre, N. B., Banerjee, R. (2020). Enhanced Tensile Yield Strength in Laser Additively Manufactured Al0.3CoCrFeNi High Entropy Alloy. Materialia. 9(2020), 100522.
Gwalani, B., Choudhuri, D., Liu, K., Lloyd, J. T., Mishra, R. S., Banerjee, R. (2020). Interplay between single phase solid solution strengthening and multi-phase strengthening in the same high entropy alloy. Other. 771, . https://api.elsevier.com/content/abstract/scopus_id/85075466714
Shi, R., Zheng, Y., Banerjee, R., Fraser, H. L., Wang, Y. (2019). $\omega$-Assisted $\alpha$ nucleation in a metastable $\beta$ titanium alloy. Scripta Materialia. 171, 62--66. Pergamon.
Huang, J., Rubink, W. S., Lide, H., Scharf, T. W., Banerjee, R., Minary‐Jolandan, M. (2019). Alumina–Nickel Composite Processed via Co-Assembly Using Freeze-Casting and Spark Plasma Sintering. Advanced Engineering Materials. 21, 1801103.
Gwalani, B., Salloom, R., Alam, T., Valentin, S., Zhou, X., Thompson, G., Srinivasan, S., Banerjee, R. (2019). Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys. Materials Research Letters. 7(7), 267--274. Taylor \& Francis.
Gwalani, B., Gangireddy, S., Shukla, S., Yannetta, C. J., Valentin, S. G., Mishra, R. S., Banerjee, R. (2019). Compositionally graded high entropy alloy with a strong front and ductile back. Other. 20, 100602. Elsevier.
Gwalani, B., Gangireddy, S., Shukla, S., Yannetta, C. J., Valentin, S. G., Mishra, R. S., Banerjee, R. (2019). Compositionally graded high entropy alloy with a strong front and ductile back. Other. 20, .
Gangireddy, S., Gwalani, B., Soni, V., Banerjee, R., Mishra, R. S. (2019). Contrasting mechanical behavior in precipitation hardenable AlxCoCrFeNi high entropy alloy microstructures: Single phase FCC vs. dual phase FCC-BCC. Other. 739, 158-166.
Mantri, S., Sun, F., Choudhuri, D., Alam, T., Gwalani, B., Prima, F., Banerjee, R. (2019). Deformation Induced Hierarchical twinning Coupled with omega transformation in a Metastable $\beta$-ti Alloy. Scientific Reports. 9(1), 1--8. Nature Publishing Group.
Choudhuri, D., Shukla, S., Gwalani, B., Banerjee, R., Mishra, R. S. (2019). Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy. Materials Research Letters. 7(1), 40--46. Taylor \& Francis.
Choudhuri, D., Shukla, S., Gwalani, B., Banerjee, R., Mishra, R. S. (2019). Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy. Materials Research Letters. 7(1), 40-46.
Bantounas, I., Gwalani, B., Alam, T., Banerjee, R., Dye, D. (2019). Elemental partitioning, mechanical and oxidation behaviour of two high-$\gamma$? W-free $\gamma$/$\gamma$? polycrystalline Co/Ni superalloys. Scripta Materialia. 163, 44--50. Pergamon.
Bantounas, I., Gwalani, B., Alam, T., Banerjee, R., Dye, D. (2019). Elemental partitioning, mechanical and oxidation behaviour of two high-gamma ' W-free gamma/gamma ' polycrystalline Co/Ni superalloys. Scripta Materialia. 163, 44-50.
Choudhuri, D., Gwalani, B., Gorsse, S., Komarasamy, M., Mantri, S. A., Srivilliputhur, S. G., Mishra, R. S., Banerjee, R. (2019). Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds. Acta Materialia. 165, 420-430. Elsevier.
Chen, S., Aitken, Z. H., Wu, Z., Yu, Z., Banerjee, R., Zhang, Y. (2019). Hall-Petch and inverse Hall-Petch relations in high-entropy CoNiFeAlxCu1-x alloys. Materials Science and Engineering: A. 138873. Elsevier.
Gangireddy, S., Gwalani, B., Banerjee, R., Mishra, R. (2019). High Strain Rate Response of Al 0.7 CoCrFeNi High Entropy Alloy: Dynamic Strength Over 2 GPa from Thermomechanical Processing and Hierarchical Microstructure. Other. 5(1), 1--7. Springer International Publishing.
Gwalani, B., Gangireddy, S., Zheng, Y., Soni, V., Mishra, R. S., Banerjee, R. (2019). Influence of ordered L1 2 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy. Scientific Reports. 9(1), 1--13. Nature Publishing Group.
Gwalani, B., Gangireddy, S., Zheng, Y., Soni, V., Mishra, R. S., Banerjee, R. (2019). Influence of ordered L1(2) precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy. Scientific Reports. 9, .
Gwalani, B., Soni, V., Waseem, O. A., Mantri, S. A., Banerjee, R. (2019). Laser additive manufacturing of compositionally graded AlCrFeMoVx (x= 0 to 1) high-entropy alloy system. Other. 113, 330--337. Elsevier.
Gwalani, B., Soni, V., Waseem, O. A., Mantri, S. A., Banerjee, R. (2019). Laser additive manufacturing of compositionally graded AlCrFeMoVx (x=0 to 1) high-entropy alloy system. Other. 113, 330-337.
Danard, Y., Poulain, R., Garcia, M., Guillou, R., Thiaudi\`ere, D,, Mantri, S., Banerjee, R., Sun, F., Prima, F. (2019). Microstructure design and in-situ investigation of TRIP/TWIP effects in a forged dual-phase Ti--10V--2Fe--3Al alloy. Other. 8, 100507. Elsevier.
Donthula, H., Vishwanadh, B., Alam, T., Borkar, T., Contieri, R., Caram, R., Banerjee, R., Tewari, R., Dey, G., Banerjee, S. (2019). Morphological evolution of transformation products and eutectoid transformation (s) in a hyper-eutectoid Ti-12 at\% Cu alloy. Acta Materialia. 168, 63--75. Pergamon.
Shi, R., Zheng, Y., Banerjee, R., Fraser, H. L., Wang, Y. (2019). omega-Assisted alpha nucleation in a metastable beta titanium alloy. Scripta Materialia. 171, 62-66.
Lilensten, L., Danard, Y., Brozek, C., Mantri, S., Castany, P., Gloriant, T., Vermaut, P., Sun, F., Banerjee, R., Prima, F. (2019). On the heterogeneous nature of deformation in a strain-transformable beta metastable Ti-V-Cr-Al alloy. Acta Materialia. 162, 268--276. Pergamon.
Soni, V., Gwalani, B., Alam, T., Dasari, S., Zheng, Y., Senkov, O., Miracle, D., Banerjee, R. (2019). Phase Inversion in a Two-phase, BCC+ B2, Refractory High Entropy Alloy. Acta Materialia. Pergamon.
Gwalani, B., Gorsse, S., Soni, V., Carl, M., Ley, N., Smith, J., Ayyagari, A. V., Zheng, Y., Young, M. L., Mishra, R. S., Banerjee, R. (2019). Role of copper on L12 precipitation strengthened fcc based high entropy alloy. Other. 6, 100282. http://www.sciencedirect.com/science/article/pii/S258915291930078X
Mantri, S., Choudhuri, D., Behera, A., Hendrickson, M., Alam, T., Banerjee, R. (2019). Role of isothermal omega phase precipitation on the mechanical behavior of a Ti-Mo-Al-Nb alloy. Materials Science and Engineering: A. 767, 138397. Elsevier.
Torgerson, T. B., Mantri, S. A., Banerjee, R., Scharf, T. W. (2019). Room and Elevated Temperature Sliding Wear Behavior and Mechanisms of Additively Manufactured Novel Precipitation Strengthened Metallic Composites. Wear. 426-427, 942-951.
Gwalani, B., Pohan, R. M., Waseem, O. A., Alam, T., Hong, S. H., Ryu, H. J., Banerjee, R. (2019). Strengthening of Al0. 3CoCrFeMnNi-based ODS high entropy alloys with incremental changes in the concentration of Y2O3. Scripta Materialia. 162, 477--481. Pergamon.
Gwalani, B., Pohan, R. M., Waseem, O. A., Alam, T., Hong, S. H., Ryu, H. J., Banerjee, R. (2019). Strengthening of Al0.3CoCrFeMnNi-based ODS high entropy alloys with incremental changes in the concentration of Y2O3. Scripta Materialia. 162, 477-481.
Gwalani, B., Gorsse, S., Choudhuri, D., Zheng, Y., Mishra, R. S., Banerjee, R. (2019). Tensile yield strength of a single bulk Al0. 3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa. Scripta Materialia. 162, 18--23. Pergamon.
Gwalani, B., Gorsse, S., Choudhuri, D., Zheng, Y., Mishra, R. S., Banerjee, R. (2019). Tensile yield strength of a single bulk Al0.3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa. Scripta Materialia. 162, 18-23.
Gwalani, H., Gwalani, B., O'Neill, M. J., Mikler, A. R., Banerjee, R. (2019). Simulation of solute clusters in metallic systems. 27(8), 25. IOP Publishing.
Gwalani, B., Gorsse, S., Soni, V., Carl, M., Ley, N., Smith, J., Ayyagari, A. V., Zheng, Y., Young, M. L., Mishra, R. S., Banerjee, R. (2019). Role of copper on L1 <inf>2</inf> precipitation strengthened fcc based high entropy alloy. Other. 6, . https://api.elsevier.com/content/abstract/scopus_id/85063090869
De-Giovanni, M., Alam, T., Banerjee, R., Srirangam, P. (2018). 3D Atom Probe Tomography Study on Segregation of Yttrium in Modified Al-Si Alloys. JOM. 70(9), 1765-1770.
Nandwana, P., Gupta, N., Srivilliputhur, S. G., Banerjee, R. (2018). A first principles study of commonly observed planar defects in Ti/TiB system. Computational Materials Science. 150, 197--201. Elsevier.
Alam, T., Gwalani, B., Viswanathan, G., Fraser, H., Banerjee, R. (2018). Detailed Investigation of Core-Shell Precipitates in a Cu-Containing High Entropy Alloy. JOM. 70(9), 1771-1775.
Mantri, S., Torgerson, T., Ivanov, E., Scharf, T., Banerjee, R. (2018). Effect of Boron Addition on the Mechanical Wear Resistance of Additively Manufactured Biomedical Titanium Alloy. Metallurgical and Materials Transactions A. 49(3), 806--810. Springer US.
Mantri, S. A., Torgerson, T. B., Ivanov, E., Scharf, T. W., Banerjee, R. (2018). Effect of Boron Addition on the Mechanical Wear Resistance of Additively Manufactured Biomedical Titanium Alloy. Metallurgical and Materials Transactions A. 49, 806-810.
Banerjee, R., Contreras-Mora, J. L., McQuiston, S. K., Bolton, B., Tavakoli Mehrabadi, B. A., Regalbuto, J. R. (2018). Electrostatic Adsorption of Platinum onto Carbon Nanotubes and Nanofibers for Nanoparticle Synthesis. Other. 4(1), 12. Multidisciplinary Digital Publishing Institute.
Salloom, R., Reith, D., Banerjee, R., Srivilliputhur, S. G. (2018). First principles calculations on the effect of interstitial oxygen on phase stability and $\beta$--$\alpha$ ″martensitic transformation in Ti--Nb alloys. Journal of Materials Science. 53(16), 11473--11487. Springer.
Salloom, R., Reith, D., Banerjee, R., Srinivasan, S. G. (2018). First principles calculations on the effect of interstitial oxygen on phase stability and beta-alpha aEuro(3) martensitic transformation in Ti-Nb alloys. Journal of Materials Science. 53(16), 11473-11487.
Gwalani, B., Pohan, R. M., Lee, J., Lee, B., Banerjee, R., Ryu, H. J., Hong, S. H. (2018). High-entropy alloy strengthened by in situ formation of entropy-stabilized nano-dispersoids. Scientific Reports. 8, .
Chaudhary, V., Gwalani, B., Soni, V., Ramanujan, R., V,, Banerjee, R. (2018). Influence of Cr Substitution and Temperature on Hierarchical Phase Decomposition in the AlCoFeNi High Entropy Alloy. Scientific Reports. 8, .
Gwalani, B., Salloom, R., Alam, T., Grace, S. V., Srivilliputhur, S. G., Banerjee, R. (2018). Investigation of Clusters and Their Effect on Grain Growth in Single Phase AlxCoCrFeNi High Entropy Alloys. Microscopy and Microanalysis. 24(S1), 2214--2215. Cambridge University Press.
Soni, V., Senkov, O. N., Gwalani, B., Miracle, D. B., Banerjee, R. (2018). Microstructural Design for Improving Ductility of An Initially Brittle Refractory High Entropy Alloy. Scientific Reports. 8, .
Mantri, S. A., Banerjee, R. (2018). Microstructure and micro-texture evolution of additively manufactured beta-Ti alloys. Other. 23, 86-98.
Gwalani, B., Ayyagari, A. V., Choudhuri, D., Scharf, T. W., Mukherjee, S., Gibson, M., Banerjee, R. (2018). Microstructure and wear resistance of an intermetallic-based Al0. 25Ti0. 75CoCrFeNi high entropy alloy. Materials Chemistry and Physics. 210, 197--206. Elsevier.
Gangireddy, S., Gwalani, B., Liu, K., Banerjee, R., Mishra, R. S. (2018). Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy. Other. 734, 42-50.
Gwalani, B., Gorsse, S., Choudhuri, D., Styles, M., Zheng, Y., Mishra, R. S., Banerjee, R. (2018). Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing. Acta Materialia. 153, 169-185.
Soni, V., Gwalani, B., Senkov, O. N., Viswanathan, B., Alam, T., Miracle, D. B., Banerjee, R. (2018). Phase stability as a function of temperature in a refractory high-entropy alloy. Journal of Materials Research. 33(19), 3235-3246.
Joshi, S. S., Choudhuri, D., Mantri, S. A., Banerjee, R., Dahotre, N. B., Banerjee, S. (2018). Rationalizing surface hardening of laser glazed grey cast iron via an integrated experimental and computational approach. Materials & Design. 156, 570-585.
Joshi, S. S., Choudhuri, D., Mantri, S. A., Banerjee, R., Dahotre, N. B., Banerjee, S. (2018). Rationalizing surface hardening of laser glazed grey cast iron via an integrated experimental and computational approach. Other. 156, 570--585. Elsevier.
Ayyagari, A., Barthelemy, C., Gwalani, B., Banerjee, R., Scharf, T. W., Mukherjee, S. (2018). Reciprocating sliding wear behavior of high entropy alloys in dry and marine environments. Materials Chemistry and Physics. 210, 162--169. Elsevier.
Ayyagari, A. V., Gwalani, B., Muskeri, S., Mukherjee, S., Banerjee, R. (2018). Surface degradation mechanisms in precipitation-hardened high-entropy alloys. Other. 2(1), 1--10. Nature Publishing Group.
Kuang, W., Was, G. S., Miller, C., Kaufman, M., Alam, T., Gwalani, B., Banerjee, R. (2018). The effect of cold rolling on grain boundary structure and stress corrosion cracking susceptibility of twins in alloy 690 in simulated PWR primary water environment. Corrosion Science. 130, 126-137.
Zheng, Y., Alam, T., Banerjee, R., Banerjee, D., Fraser, H. L. (2018). The influence of aluminum and oxygen additions on intrinsic structural instabilities in titanium-molybdenum alloys. Scripta Materialia. 152, 150-153.
Mantri, S. A., Choudhuri, D., Alam, T., Viswanathan, G. B., Sosa, J. M., Fraser, H. L., Banerjee, R. (2018). Tuning the scale of alpha precipitates in beta-titanium alloys for achieving high strength. Scripta Materialia. 154, 139-144.
Banerjee, R., Sengupta, P., Chatterjee, A., Mishra, S., Bhukta, A., Satyam, P., Samajdar, I., Dey, G. (2018). Understanding self ion damage in FCC Ni-Cr-Fe based alloy using X-ray diffraction techniques. Journal of Nuclear Materials. 501, 82--93. North-Holland.
Choudhuri, D., Banerjee, R., Srivilliputhur, S. G. (2018). Uniaxial deformation of face-centered-cubic (Ni)-ordered B2 (NiAl) bicrystals: atomistic mechanisms near a Kurdjumov--Sachs interface. Journal of Materials Science. 53(8), 5684--5695. Springer US.
Choudhuri, D., Shukla, S., Green, W. B., Gwalani, B., Ageh, V., Banerjee, R., Mishra, R. S. (2018). Crystallographically degenerate B2 precipitation in a plastically deformed fcc-based complex concentrated alloy. Materials Research Letters. 6(3), 171-177. Informa UK Limited. http://dx.doi.org/10.1080/21663831.2018.1426649
Wang, J., Liu, R., Majumdar, T., Mantri, S., Ravi, V., Banerjee, R., Birbilis, N. (2017). A closer look at the in vitro electrochemical characterisation of titanium alloys for biomedical applications using in-situ methods. Acta Biomaterialia. Elsevier.
Borkar, T., Chaudhary, V., Gwalani, B., Choudhuri, D., Mikler, C. V., Soni, V., Alam, T., Ramanujan, R. V., Banerjee, R. (2017). A Combinatorial Approach for Assessing the Magnetic Properties of High Entropy Alloys: Role of Cr in AlCoxCr1-xFeNi. Advanced Engineering Materials. 19(8), .
Dutta, R., Banerjee, R. H., Dey, G. (2017). An XPS Study with Depth Profiling for the Surface Oxide Layer Formed on Aluminides Produced on Superalloy 690 Substrates. Oxidation of Metals. 1--13. Springer US.
Santos-Ortiz, R., Rojhirunsakool, T., Jha, J. K., Al Khateeb, S., Banerjee, R., Jones, K. S., Shepherd, N. D. (2017). Analysis of the structural evolution of the SEI layer in FeF 2 thin-film lithium-ion batteries upon cycling using HRTEM and EELS. Solid State Ionics. 303, 103–112. Elsevier.
Santos-Ortiz, R., Rojhirunsakool, T., Jha, J. K., Al Khateeb, Shadi,, Banerjee, R., Jones, K., Shepherd, N. D. (2017). Analysis of the structural evolution of the SEI layer in FeF2 thin-film lithium-ion batteries upon cycling using HRTEM and EELS. Solid State Ionics. 303, 103-112.
Mantri, S., Choudhuri, D., Alam, T., Ageh, V., Sun, F., Prima, F., Banerjee, R. (2017). Change in the deformation mode resulting from beta-omega compositional partitioning in a Ti Mo alloy: Room versus elevated temperature. Scripta Materialia. 130, 69–73. Pergamon.
Mantri, S., Choudhuri, D., Alam, T., Ageh, V., Sun, F., Prima, F., Banerjee, R. (2017). Change in the deformation mode resulting from beta-omega compositional partitioning in a TiMo alloy: Room versus elevated temperature. Scripta Materialia. 130, 69--73. Pergamon.
Choudhuri, D., Gwalani, B., Gorsse, S., Mikler, C., Ramanujan, R., Gibson, M., Banerjee, R. (2017). Change in the primary solidification phase from fcc to bcc-based B2 in high entropy or complex concentrated alloys. Scripta Materialia. 127, 186–190. Pergamon.
Choudhuri, D., Zheng, Y., Alam, T., Shi, R., Hendrickson, M., Banerjee, S., Wang, Y., Srinivasan, S., Fraser, H., Banerjee, R. (2017). Coupled experimental and computational investigation of omega phase evolution in a high misfit titanium-vanadium alloy. Acta Materialia. Pergamon.
Choudhuri, D., Zheng, Y., Alam, T., Shi, R., Hendrickson, M., Banerjee, S., Wang, Y., Srinivasan, S. G., Fraser, H., Banerjee, R. (2017). Coupled experimental and computational investigation of omega phase evolution in a high misfit titanium-vanadium alloy. Acta Materialia. 130, 215-228.
Gwalani, B., Choudhuri, D., Soni, V., Ren, Y., Styles, M., Hwang, J., Nam, S., Ryu, H., Hong, S., Banerjee, R. (2017). Cu assisted stabilization and nucleation of L1 2 precipitates in Al 0.3 CuFeCrNi 2 fcc-based high entropy alloy. Acta Materialia. 129, 170–182. Pergamon.
Mondol, S., Alam, T., Banerjee, R., Kumar, S., Chattopadhyay, K. (2017). Development of a high temperature high strength Al alloy by addition of small amounts of Sc and Mg to 2219 alloy. Materials Science and Engineering: A. 687, 221–231. Elsevier.
Nithin, B., Samanta, A., Makineni, S., Alam, T., Pandey, P., Singh, A. K., Banerjee, R., Chattopadhyay, K. (2017). Effect of Cr addition on $\gamma$--$\gamma$′ cobalt-based Co--Mo--Al--Ta class of superalloys: a combined experimental and computational study. Journal of Materials Science. 52(18), 11036--11047. Springer US.
Nithin, B., Samanta, A., Makineni, S. K., Alam, T., Pandey, P., Singh, A. K., Banerjee, R., Chattopadhyay, K. (2017). Effect of Cr addition on gamma-gamma ' cobalt-based Co-Mo-Al-Ta class of superalloys: a combined experimental and computational study. Journal of Materials Science. 52(18), 11036-11047.
Makineni, S. K., Sugathan, S., Meher, S., Banerjee, R., Bhattacharya, S., Kumar, S., Chattopadhyay, K. (2017). Enhancing elevated temperature strength of copper containing aluminium alloys by forming L1 2 Al 3 Zr precipitates and nucleating $\theta$ ″precipitates on them. Scientific Reports. 7(1), 11154. Nature Publishing Group.
Makineni, S. K., Sugathan, S., Meher, S., Banerjee, R., Bhattacharya, S., Kumar, S., Chattopadhyay, K. (2017). Enhancing elevated temperature strength of copper containing aluminium alloys by forming L1(2) Al3Zr precipitates and nucleating theta '' precipitates on them. Scientific Reports. 7, .
Mikler, C., Chaudhary, V., Borkar, T., Soni, V., Jaeger, D., Chen, X., Contieri, R., Ramanujan, R., Banerjee, R. (2017). Erratum: Correction to: Laser Additive Manufacturing of Magnetic Materials. Journal of the Minerals, Metals, and Materials Society. 69(12), 2855--2856.
Choudhuri, D., Srinivasan, S. G., Gibson, M. A., Zheng, Y., Jaeger, D. L., Fraser, H. L., Banerjee, R. (2017). Exceptional increase in the creep life of magnesium rare-earth alloys due to localized bond stiffening. Nature Communications. 8, .
Jaiswal, P. R., Pande, N., Banerjee, R., Radke, U., others, (2017). Hollow denture: A boon in increased interridge space in edentulous ridges. Other. 7(2), 144. Medknow Publications.
Choudhuri, D., Banerjee, R., Srinivasan, S. (2017). Interfacial structures and energetics of the strengthening precipitate phase in creep-resistant Mg-Nd-based alloys. Scientific Reports. 7, . Nature Publishing Group.
Mikler, C. V., Chaudhary, V., Borkar, T., Soni, V., Jaeger, D., Chen, X., Contieri, R., Ramanujan, R. V., Banerjee, R. (2017). Laser Additive Manufacturing of Magnetic Materials. JOM. 69(3), 532-543.
Lima, D., Mantri, S., Mikler, C., Contieri, R., Yannetta, C., Campo, K., Lopes, E., Styles, M., Borkar, T., Caram, R., Banerjee, (2017). Laser additive processing of a functionally graded internal fracture fixation plate. Materials & Design. 130, 8--15. Elsevier.
Conteri, R., Borkar, T., Nag, S., Jaeger, D., Chen, X., Ramanujan, R., Banerjee, R. (2017). Laser additive processing of Fe-Si-B-Cu-Nb magnetic alloys. Journal of Manufacturing Processes. 29, 175--181. Elsevier.
Mikler, C., Chaudhary, V., Borkar, T., Soni, V., Choudhuri, D., Ramanujan, R., Banerjee, R. (2017). Laser additive processing of Ni-Fe-V and Ni-Fe-Mo Permalloys: Microstructure and magnetic properties. Materials Letters. 192, 9–11. North-Holland.
Pohan, R. M., Gwalani, B., Lee, J., Alam, T., Hwang, J., Ryu, H. J., Banerjee, R., Hong, S. H. (2017). Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0. 3CoCrFeMnNi high entropy alloy. Materials Chemistry and Physics. Elsevier.
Gwalani, B., Soni, V., Lee, M., Mantri, S., Ren, Y., Banerjee, R. (2017). Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al 0.3 CoCrFeNi high entropy alloy. Materials & Design. 121, 254–260. Elsevier.
Gwalani, B., Soni, V., Lee, M., Mantri, S., Ren, Y., Banerjee, R. (2017). Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0. 3CoCrFeNi high entropy alloy. Materials & Design. 121, 254--260. Elsevier.
Sun, F., Zhang, J., Vermaut, P., Choudhuri, D., Alam, T., Mantri, S., Svec, P., Gloriant, T., Jacques, P., Banerjee, R., others, (2017). Strengthening strategy for a ductile metastable $\beta$-titanium alloy using low-temperature aging. Materials Research Letters. 5(8), 547--553. Taylor \& Francis.
Mantri, S., Alam, T., Choudhuri, D., Yannetta, C., Mikler, C., Collins, P., Banerjee, R. (2017). The effect of boron on the grain size and texture in additively manufactured $\beta$-Ti alloys. Journal of Materials Science. 52(20), 12455--12466. Springer US.
Hendrickson, M., Mantri, S., Ren, Y., Alam, T., Soni, V., Gwalani, B., Styles, M., Choudhuri, D., Banerjee, R. (2017). The evolution of microstructure and microhardness in a biomedical Ti–35Nb–7Zr–5Ta alloy. Journal of Materials Science. 52(6), 3062–3073. Springer US.
Mikler, C., Chaudhary, V., Soni, V., Gwalani, B., Ramanujan, R., Banerjee, R. (2017). Tuning the phase stability and magnetic properties of laser additively processed Fe-30at% Ni soft magnetic alloys. Materials Letters. North-Holland.
Choudhuri, D., Banerjee, R., Srinivasan, S. (2017). Uniaxial deformation of face-centered-cubic (Ni)-ordered B2 (NiAl) bicrystals: atomistic mechanisms near a Kurdjumov--Sachs interface. Journal of Materials Science. 1--12. Springer US.
Pohan, R. M., Gwalani, B., Lee, J., Alam, T., Hwang, J., Ryu, H. J., Banerjee, R., Hong, S. H. (2017). Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al 0.3 CoCrFeMnNi high entropy alloy. Materials Chemistry and Physics. Elsevier BV. http://dx.doi.org/10.1016/j.matchemphys.2017.09.013
Zheng, Y., Alam, T., Banerjee, R., Fraser, H. L. (2017). Investigation of Novel Phase Transformation Mechanisms in Titanium Alloys Using Atom Probe and Aberration-Corrected Scanning Transmission Electron Microscope. Microscopy and Microanalysis. 23(S1), 730-731. Cambridge University Press (CUP). http://dx.doi.org/10.1017/s1431927617004317
Ayyagari, A., Barthelemy, C., Gwalani, B., Banerjee, R., Scharf, T. W., Mukherjee, S. (2017). Reciprocating sliding wear behavior of high entropy alloys in dry and marine environments. Materials Chemistry and Physics. Elsevier BV. http://dx.doi.org/10.1016/j.matchemphys.2017.07.031
Gwalani, B., Ayyagari, A. V., Choudhuri, D., Scharf, T. W., Mukherjee, S., Gibson, M., Banerjee, R. (2017). Microstructure and wear resistance of an intermetallic-based Al0.25Ti0.75CoCrFeNi high entropy alloy. Materials Chemistry and Physics. Elsevier BV. http://dx.doi.org/10.1016/j.matchemphys.2017.06.034
Borkar, T., Gwalani, B., Choudhuri, D., Mikler, C., Yannetta, C., Chen, X., Ramanujan, R. V., Styles, M., Gibson, M., Banerjee, R. (2016). A combinatorial assessment of Al x CrCuFeNi 2 (0< x< 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties. Acta Materialia. 116, 63–76. Pergamon.
Borkar, T., Gwalani, B., Choudhuri, D., Mikler, C., Yannetta, C., Chen, X., Ramanujan, R. V., Styles, M., Gibson, M., Banerjee, R. (2016). A combinatorial assessment of AlxCrCuFeNi2 (0< x< 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties. Acta Materialia. 116, 63--76. Pergamon.
Srivilliputhur, S., Srinivasan, S., Gibson, M. A., Banerjee, R. (2016). Bonding environments in a creep–resistant Mg-RE-Zn alloy.
Gwalani, B., Soni, V., Alam, T., Banerjee, R. (2016). Designing and characterizing a complex concentrated gamma/gamma prime ‘superalloy’. Microscopy and Microanalysis. 22(S3), 672–673. Cambridge University Press.
Meher, S., Viswanathan, G., Nag, S., Fraser, H., Banerjee, R. (2016). Determination of the gamma prime/gamma interface width in a Co–Al–W alloy via coupled aberration-corrected scanning transmission electron microscopy and atom probe tomography. Scripta Materialia. 121, 23–27. Pergamon.
Salloom, R., Banerjee, R., Srinivasan, S. (2016). Effect of $\beta$-stabilizer elements on stacking faults energies and ductility of $\alpha$-titanium using first-principles calculations. Journal of Applied Physics. 120(17), 175105. AIP Publishing.
Salloom, R., Banerjee, R., Srinivasan, S. (2016). Effect of $β$-stabilizer elements on stacking faults energies and ductility of $α$-titanium using first-principles calculations!!!. Journal of Applied Physics. 120(17), 175105. AIP Publishing.
Gwalani, B., Alam, T., Miller, C., Rojhirunsakool, T., Kim, Y., Kim, S., Kaufman, M., Ren, Y., Banerjee, R. (2016). Experimental investigation of the ordering pathway in a Ni-33 at.% Cr alloy. Acta Materialia. 115, 372–384. Pergamon.
Vishwanadh, B., Krishna, K. M., Upadhyay, A., Banerjee, R., Arya, A., Tewari, R., Fraser, H., Dey, G. (2016). Formation mechanism of the Nb 2 C phase in the Nb–1Zr–0.1 C (wt.%) alloy and interrelation between $γ$, $β$ and $α$-Nb 2 C carbide phases. Acta Materialia. 108, 186–196. Pergamon.
Vishwanadh, B., Krishna, K. M., Upadhyay, A., Banerjee, R., Arya, A., Tewari, R., Fraser, H., Dey, G. (2016). Formation mechanism of the Nb2C phase in the Nb--1Zr--0.1 C (wt.\%) alloy and interrelation between $\gamma$, $\beta$ and $\alpha$-Nb2C carbide phases. Acta Materialia. 108, 186--196. Pergamon.
Vishwanadh, B., Krishna, K. V. Mani,, Upadhyay, A., Banerjee, R., Arya, A., Tewari, R., Fraser, H. L., Dey, G. K. (2016). Formation mechanism of the Nb2C phase in the Nb-1Zr-0.1C (wt.%) alloy and interrelation between gamma, beta and alpha-Nb2C carbide phases. Acta Materialia. 108, 186-196.
Gwalani, B., Alam, T., Kaufman, M., Banerjee, R. (2016). Grain Boundary Precipitation in Ni Based Superalloy 690 Investigated via Site-specific Atom Probe Microscopy. Microscopy and Microanalysis. 22(S3), 1500–1501. Cambridge University Press.
Borkar, T., Gwalani, B., Choudhuri, D., Alam, T., Mantri, A., Gibson, M., Banerjee, R. (2016). Hierarchical multi-scale microstructural evolution in an as-cast Al 2 CuCrFeNi 2 complex concentrated alloy. Intermetallics. 71, 31–42. Elsevier.
Borkar, T., Gwalani, B., Choudhuri, D., Alam, T., Mantri, A., Gibson, M., Banerjee, R. (2016). Hierarchical multi-scale microstructural evolution in an as-cast Al2CuCrFeNi2 complex concentrated alloy. Intermetallics. 71, 31--42. Elsevier.
Niinomi, M., Nakai, M., Hendrickson, M., Nandwana, P., Alam, T., Choudhuri, D., Banerjee, R. (2016). Influence of oxygen on omega phase stability in the Ti-29Nb-13Ta-4.6 Zr alloy. Scripta Materialia. 123, 144–148. Pergamon.
Niinomi, M., Nakai, M., Hendrickson, M., Nandwana, P., Alam, T., Choudhuri, D., Banerjee, R. (2016). Influence of oxygen on omega phase stability in the Ti-29Nb-13Ta-4.6Zr alloy. Scripta Materialia. 123, 144-148.
Borkar, T., Conteri, R., Chen, X., Ramanujan, R., Banerjee, R. (2016). Laser additive processing of functionally-graded Fe–Si–B–Cu–Nb soft magnetic materials. Materials and Manufacturing Processes. 1–7. Taylor & Francis.
Dahotre, N. B., Banerjee, R., (2016). Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum. 68(7), .
Vora, H. D., Rajamure, R. S., Roy, A., Srinivasan, S., Sundararajan, G., Banerjee, R., Dahotre, N. B. (2016). Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum. JOM. 68(7), 1819–1829. Springer US.
Chattopadhyay, S., Kelly, S. D., Shibata, T., Balasubramanian, M., Srinivasan, S. G., Du, J., Banerjee, R., Ayyub, P. (2016). Local structure, composition, and crystallization mechanism of a model two-phase "composite nanoglass". Journal of Chemical Physics. 144(6), . http://dx.doi.org/10.1063/1.4941334
Chattopadhyay, S., Kelly, S., Shibata, T., Balasubramanian, M., Srinivasan, S., Du, J., Banerjee, R., Ayyub, P. (2016). Local structure, composition, and crystallization mechanism of a model two-phase ?composite nanoglass?. The Journal of Chemical Physics. 144(6), 064503. AIP Publishing.
Samimi, P., Brice, D., Banerjee, R., Kaufman, M., Collins, P. (2016). On the influence of alloy composition on the oxidation performance and oxygen-induced phase transformations in Ti–(0–8) wt% Al alloys. Journal of Materials Science. 51(8), 3684–3692. Springer US.
Zhang, Y., Alam, T., Gwalani, B., Rong, W., Banerjee, R., Peng, L., Nie, J., Birbilis, N. (2016). On the role of Ag in enhanced age hardening kinetics of Mg–Gd–Ag–Zr alloys. Philosophical Magazine Letters. 96(6), 212–219. Taylor & Francis.
Xia, C., Kang, C., Patel, M. D., Cai, L., Gwalani, B., Banerjee, R., Shi, S. Q., Choi, W. (2016). Pine Wood Extracted Activated Carbon through Self-Activation Process for High-Performance Lithium-Ion Battery. ChemistrySelect. 1(13), 4000–4007.
Xia, C., Kang, C., Patel, M. D., Cai, L., Gwalani, B., Banerjee, R., Shi, S. Q., Choi, W. (2016). Pine Wood Extracted Activated Carbon through Self-Activation Process for High-Performance Lithium-Ion Battery. ChemistrySelect. 1(13), 4000--4007.
Choudhuri, D., Mantri, S. A., Alam, T., Banerjee, S., Banerjee, R. (2016). Precipitate-dislocation interaction mediated Portevin-Le Chatelier-like effect in a beta-stabilized Ti-Mo-Nb-Al alloy. Scripta Materialia. 124, 15–20. Pergamon.
Zheng, Y., Williams, Robert E. A.,, Wang, D., Shi, R., Nag, S., Kami, P., Sosa, J. M., Banerjee, R., Wang, Y., Fraser, H. L. (2016). Role of omega phase in the formation of extremely refined intragranular a precipitates in metastable ss-titanium alloys. Acta Materialia. 103, 850-858.
Mogonye, J., Srivastava, A., Gopagoni, S., Banerjee, R., Scharf, T. W. (2016). Solid/Self-Lubrication Mechanisms of an Additively Manufactured Ni–Ti–C Metal Matrix Composite. Tribology Letters. 64(3), 37.
Gwalani, B., Soni, V., Choudhuri, D., Lee, M., Hwang, J., Nam, S., Ryu, H., Hong, S., Banerjee, R. (2016). Stability of ordered L1 2 and B 2 precipitates in face centered cubic based high entropy alloys-Al 0.3 CoFeCrNi and Al 0.3 CuFeCrNi 2. Scripta Materialia. 123, 130–134. Pergamon.
Gwalani, B., Soni, V., Choudhuri, D., Lee, M., Hwang, J. Y., Nam, S. J., Ryu, H., Hong, S. H., Banerjee, R. (2016). Stability of ordered L1(2) and B-2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2. Scripta Materialia. 123, 130-134.
Gwalani, B., Soni, V., Choudhuri, D., Lee, M., Hwang, J., Nam, S., Ryu, H., Hong, S., Banerjee, R. (2016). Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys-Al0. 3CoFeCrNi and Al0. 3CuFeCrNi2. Scripta Materialia. 123, 130--134. Pergamon.
Tiley, J., Mahaffey, D., Alam, T., Rojhirunsakool, T., Senkov, O., Parthasarthy, T., Banerjee, R. (2016). Strengthening mechanisms in an inertia friction welded nickel-base superalloy. Materials Science and Engineering: A. 662, 26–35. Elsevier.
Zheng, Y., Williams, R. E., Nag, S., Banerjee, R., Fraser, H. L., Banerjee, D. (2016). The effect of alloy composition on instabilities in the $\beta$ phase of titanium alloys. Scripta Materialia. 116, 49--52. Pergamon.
Zheng, Y., Williams, R. E., Nag, S., Banerjee, R., Fraser, H. L., Banerjee, D. (2016). The effect of alloy composition on instabilities in the $β$ phase of titanium alloys. Scripta Materialia. 116, 49–52. Pergamon.
Zheng, Y., Williams, R. E., Sosa, J. M., Alam, T., Wang, Y., Banerjee, R., Fraser, H. L. (2016). The indirect influence of the $\omega$ phase on the degree of refinement of distributions of the $\alpha$ phase in metastable $\beta$-Titanium alloys. Acta Materialia. 103, 165--173. Pergamon.
Zheng, Y., Williams, R. E., Sosa, J. M., Alam, T., Wang, Y., Banerjee, R., Fraser, H. L. (2016). The indirect influence of the $ω$ phase on the degree of refinement of distributions of the $α$ phase in metastable $β$-Titanium alloys. Acta Materialia. 103, 165–173. Pergamon.
Zheng, Y., Choudhuri, D., Alam, T., Williams, Robert E. A.,, Banerjee, R., Fraser, H. L. (2016). The role of cuboidal omega precipitates on alpha precipitation in a Ti-20V alloy. Scripta Materialia. 123, 81-85.
Zheng, Y., Williams, R. E., Sosa, J. M., Wang, Y., Banerjee, R., Fraser, H. L. (2016). The role of the $\omega$ phase on the non-classical precipitation of the $\alpha$ phase in metastable $\beta$-titanium alloys. Scripta Materialia. 111, 81--84. Pergamon.
Zheng, Y., Williams, R. E., Sosa, J. M., Wang, Y., Banerjee, R., Fraser, H. L. (2016). The role of the $ω$ phase on the non-classical precipitation of the $α$ phase in metastable $β$-titanium alloys. Scripta Materialia. 111, 81–84. Pergamon.
Kairy, S. K., Alam, T., Rometsch, P. A., Davies, C. H., Banerjee, R., Birbilis, N. (2016). Understanding the Origins of Intergranular Corrosion in Copper-Containing Al-Mg-Si Alloys. Metallurgical and Materials Transactions A. 47(3), 985–989. Springer US.
Makineni, S., Samanta, A., Rojhirunsakool, T., Alam, T., Nithin, B., Singh, A., Banerjee, R., Chattopadhyay, K. (2015). A new class of high strength high temperature cobalt based $\gamma$--$\gamma$′ Co--Mo--Al alloys stabilized with Ta addition. Acta Materialia. 97, 29--40. Pergamon.
Makineni, S., Samanta, A., Rojhirunsakool, T., Alam, T., Nithin, B., Singh, A., Banerjee, R., Chattopadhyay, K. (2015). A new class of high strength high temperature cobalt based $γ$–$γ$’ Co–Mo–Al alloys stabilized with Ta addition. Acta Materialia. 97, 29–40. Pergamon.
Makineni, S. K., Samanta, A., Rojhirunsakool, T., Alam, T., Nithin, B., Singh, A. K., Banerjee, R., Chattopadhyay, K. (2015). A new class of high strength high temperature Cobalt based gamma-gamma ' Co-Mo-Al alloys stabilized with Ta addition. Acta Materialia. 97, 29-40.
Mridha, S., Jaeger, D. L., Arora, H. S., Banerjee, R., Mukherjee, S. (2015). Atomic distribution in catalytic amorphous metals. Journal of Nanomaterials. 16(1), 438. Hindawi Publishing Corp..
Mridha, S., Jaeger, D. L., Arora, H. S., Banerjee, R., Mukherjee, S. (2015). Atomic distribution in catalytic amorphous metals. Journal of Nanomaterials. 2015, . Hindawi.
Vishwanadh, B., Majumdar, S., Orsborn, J., Banerjee, R., Tewari, R., Fraser, H., Dey, G. (2015). Characterization of silicide phases formed during pack siliconizing coating on the Nb-1Zr-0.1 C alloy. Intermetallics. 63, 59–66. Elsevier.
Vishwanadh, B., Majumdar, S., Orsborn, J., Banerjee, R., Tewari, R., Fraser, H., Dey, G. K. (2015). Characterization of suicide phases formed during pack siliconizing coating on the Nb-1Zr-0.1C alloy. Intermetallics. 63, 59-66.
Petit, L., Paudyal, D., Mudryk, Y., Gschneidner, Jr, K., Pecharsky, V., L\"uders, M,, Szotek, Z., Banerjee, R., Staunton, J. (2015). Complex magnetism of lanthanide intermetallics and the role of their valence electrons: Ab Initio theory and experiment. Physical Review Letters. 115(20), 207201. American Physical Society.
Ng, H., Nandwana, P., Devaraj, A., Semblanet, M., Nag, S., Nakashima, P., Meher, S., Bettles, C., Gibson, M., Fraser, H., others, (2015). Conjugated precipitation of twin-related $\alpha$ and Ti 2 Cu phases in a Ti--25V--3Cu alloy. Acta Materialia. 84, 457--471. Pergamon.
Ng, H., Nandwana, P., Devaraj, A., Semblanet, M., Nag, S., Nakashima, P., Meher, S., Bettles, C., Gibson, M., Fraser, H., others, (2015). Conjugated precipitation of twin-related $α$ and Ti 2 Cu phases in a Ti–25V–3Cu alloy. Acta Materialia. 84, 457–471. Pergamon.
Ng, H. P., Nandwana, P., Devaraj, A., Samblanet, M., Nag, S., Nakashima, P. N. H.,, Meher, S., Bettles, C. J., Gibson, M. A., Fraser, H. L., Muddle, B. C., Banerjee, R. (2015). Conjugated precipitation of twin-related alpha and Ti2Cu phases in a Ti-25V-3Cu alloy. Acta Materialia. 84, 457-471.
Ng, H., Nandwana, P., Devaraj, A., Semblanet, M., Nag, S., Nakashima, P., Meher, S., Bettles, C., Gibson, M., Fraser, H., others, (2015). Corrigendum to “Conjugated precipitation of twin-related $\alpha$ and Ti2Cu phases in a Ti--25V--3Cu alloy”[Acta Mater. 84 (2015) 457--471]. Acta Materialia. (87), 412.
Ng, H., Nandwana, P., Devaraj, A., Semblanet, M., Nag, S., Nakashima, P., Meher, S., Bettles, C., Gibson, M., Fraser, H., others, (2015). Corrigendum to “Conjugated precipitation of twin-related a and Ti2Cu phases in a Ti–25V–3Cu alloy”[Acta Mater. 84 (2015) 457–471]. Acta Materialia. 87, 412–412.
Meher, S., Rojhirunsakool, T., Nandwana, P., Tiley, J., Banerjee, R. (2015). Determination of solute site occupancies within $\gamma$′ precipitates in nickel-base superalloys via orientation-specific atom probe tomography. Ultramicroscopy. 159, 272--277. North-Holland.
Meher, S., Rojhirunsakool, T., Nandwana, P., Tiley, J., Banerjee, R. (2015). Determination of solute site occupancies within $γ$’ precipitates in nickel-base superalloys via orientation-specific atom probe tomography. Ultramicroscopy. 159, 272–277. North-Holland.
Meher, S., Rojhirunsakool, T., Nandwana, P., Tiley, J., Banerjee, R. (2015). Determination of solute site occupancies within gamma' precipitates in nickel-base superalloys via orientation-specific atom probe tomography. Ultramicroscopy. 159, 272-277.
Santos-Ortiz, R., Jha, J. K., Rojhirunsakool, T., Dendge, N., Banerjee, R., Shepherd, N. D. (2015). Effect of deposition energy on the microstructure and phase purity of pulsed laser deposited iron fluoride thin films. Applied Physics A. 120(3), 863–868. Springer Berlin Heidelberg.
Hornbuckle, B., Rojhirunsakool, T., Rajagopalan, M., Alam, T., Pun, G. P., Banerjee, R., Solanki, K., Mishin, Y., Kecskes, L., Darling, K. (2015). Effect of Ta solute concentration on the microstructural evolution in immiscible Cu-Ta alloys. JOM. 67(12), 2802–2809. Springer US.
Datta, S., Banerjee, R., Mookerjee, A. (2015). Enhanced magnetism of Cu n clusters capped with N and endohedrally doped with Cr. The Journal of Chemical Physics. 142(2), 024309. AIP Publishing.
Mridha, S., Jaeger, D. L., Arora, H. S., Banerjee, R., Mukherjee, S. (2015). Evolution of atomic distribution during devitrification of bulk metallic glass investigated by atom probe microscopy. Materials Letters. 158, 99–103. North-Holland.
Mridha, S., Jaeger, D. L., Arora, H. S., Banerjee, R., Mukherjee, S. (2015). Evolution of atomic distribution during devitrification of bulk metallic glass investigated by atom probe microscopy. Materials Letters. 158, 99--103. North-Holland.
Borkar, T., Mohseni, H., Hwang, J., Scharf, T. W., Tiley, J. S., Hong, S. H., Banerjee, R. (2015). Excellent Strength-Ductility Combination in Nickel-Graphite Nanoplatelet (GNP/Ni) Nanocomposites. Journal of Alloys and Compounds. 646, 135-144.
Choudhuri, D., Alam, T., Borkar, T., Gwalani, B., Mantri, A., Srinivasan, S., Gibson, M., Banerjee, R. (2015). Formation of a Huesler-like L2 1 phase in a CoCrCuFeNiAlTi high-entropy alloy. Scripta Materialia. 100, 36–39. Pergamon.
Choudhuri, D., Alam, T., Borkar, T., Gwalani, B., Mantri, A., Srinivasan, S., Gibson, M., Banerjee, R. (2015). Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy. Scripta Materialia. 100, 36--39. Pergamon.
Mohseni, H., Nandwana, P., Tsoi, A., Banerjee, R., Scharf, T. W. (2015). In Situ Nitrided Titanium Alloys: Microstructural Evolution during Solidification and Wear. Acta Materialia. 83, 61–74.
Mantri, S., Choudhuri, D., Behera, A., Cotton, J., Kumar, N., Banerjee, R. (2015). Influence of fine-scale alpha precipitation on the mechanical properties of the beta titanium alloy beta-21S. Metallurgical and Materials Transactions A. 46(7), 2803–2808. Springer US.
Alam, T., Borkar, T., Joshi, S. S., Katakam, S., Chen, X., Dahotre, N. B., Ramanujan, R. V., Banerjee, R. (2015). Influence of niobium on laser de-vitrification of Fe--Si--B based amorphous magnetic alloys. Journal of Non-Crystalline Solids. 428, 75--81. Elsevier.
Dahotre, N. B., Banerjee, R., (2015). Influence of Niobium on Laser De-vitrification of Fe-Si-B Based Amorphous Magnetic Alloys. 428, 75-81.
Meher, S., Nandwana, P., Rojhirunsakool, T., Tiley, J., Banerjee, R. (2015). Probing the crystallography of ordered Phases by coupling of orientation microscopy with atom probe tomography. Ultramicroscopy. 148, 67–74. North-Holland.
Kumar, N., Choudhuri, D., Banerjee, R., Mishra, R. (2015). Strength and ductility optimization of Mg–Y–Nd–Zr alloy by microstructural design. International Journal of Plasticity. 68, 77–97. Pergamon.
Rojhirunsakool, T., Darling, K. A., Tschopp, M. A., Pun, G. P., Mishin, Y., Banerjee, R., Kecskes, L. J. (2015). Structure and thermal decomposition of a nanocrystalline mechanically alloyed supersaturated Cu–Ta solid solution. MRS Communications. 5(02), 333–339. Cambridge University Press.
CNT, C. N., NICKEL, G. N. (2015). Tushar Borkar1, Hamidreza Mohseni1, Junyeon Hwang2, Thomas Scharf1, Jaimie Tiley3, Soon H. Hong4, and Rajarshi Banerjee1.
Dahotre, N. B., Banerjee, R., (2014). Comparison of the Crystallization Behavior of Fe-Si-B-Cu and Fe-Si-B-Cu-Nb Based Amorphous Soft Magnetic Alloys. 3 Biotech. 45A, 2998-3009.
Jaeger, D. L., Mridha, S., Choudhuri, D., Banerjee, R., others, (2014). Compositional Analysis of as-cast and Crystallized Pd 43 Cu 27 Ni 10 P 20 Bulk Metallic Glass. Microscopy and Microanalysis. 20(S3), 814–815. Cambridge University Press.
Jaeger, D. L., Mridha, S., Choudhuri, D., Banerjee, R., others, (2014). Compositional Analysis of as-cast and Crystallized Pd 43 Cu 27 Ni 10 P 20 Bulk Metallic Glass. Microscopy and Microanalysis. 20(S3), 814--815. Cambridge University Press.
Jaeger, D. L., Mridha, S., Choudhuri, D., Mukherjee, S., Banerjee, R. (2014). Compositional Analysis of as-cast and Crystallized Pd43Cu27Ni10P20 Bulk Metallic Glass. Microscopy and Microanalysis. 20(S3), 814--815. Cambridge University Press.
Puthucode, A., Devaraj, A., Nag, S., Bose, S., Ayyub, P., Kaufman, M., Banerjee, R. (2014). De-vitrification of nanoscale phase-separated amorphous thin films in the immiscible copper–niobium system. Philosophical Magazine. 94(15), 1622–1641. Taylor & Francis.
Rojhirunsakool, T., Nag, S., Banerjee, R. (2014). Discontinuous precipitation of $\gamma$′ phase in Ni-Co-Al Alloys. JOM. 66(8), 1465--1470. Springer US.
Rojhirunsakool, T., Nag, S., Banerjee, R. (2014). Discontinuous Precipitation of $γ$’ Phase in Ni-Co-Al Alloys. JOM. 66(8), 1465–1470. Springer US.
Rojhirunsakool, T., Nag, S., Banerjee, R. (2014). Discontinuous Precipitation of gamma ' Phase in Ni-Co-Al Alloys. JOM. 66(8), 1465-1470.
Kumar, N., Dendge, N., Banerjee, R., Mishra, R. (2014). Effect of microstructure on the uniaxial tensile deformation behavior of Mg–4Y–3RE alloy. Materials Science and Engineering: A. 590, 116–131. Elsevier.
Contieri, R., Lopes, E., Caram, R., Devaraj, A., Nag, S., Banerjee, R. (2014). Effects of cooling rate on the microstructure and solute partitioning in near eutectoid Ti–Cu alloys. Philosophical Magazine. 94(21), 2350–2371. Taylor & Francis.
Banerjee, R., Rojhirunsakool, T., Eng, B. (2014). GAMMA PRIME PRECIPITATION MECHANISMS AND SOLUTE PARTITIONING IN Ni-BASE ALLOYS.
Choudhuri, D., Dendge, N., Nag, S., Meher, S., Alam, T., Gibson, M., Banerjee, R. (2014). Homogeneous and heterogeneous precipitation mechanisms in a binary Mg–Nd alloy. Journal of Materials Science. 49(20), 6986–7003. Springer US.
Dahotre, N. B., Banerjee, R., (2014). Improved Soft Magnetic Properties by Laser De-vitrification of Fe-Si-B Amorphous Magnetic Alloys. 122, 155-158.
Borkar, T., Banerjee, R. (2014). Influence of spark plasma sintering (SPS) processing parameters on microstructure and mechanical properties of nickel. Materials Science and Engineering: A. 618, 176–181. Elsevier.
Wang, D., Shi, R., Zheng, Y., Banerjee, R., Fraser, H. L., Wang, Y. (2014). Integrated Computational Materials Engineering (ICME) Approach to Design of Novel Microstructures for Ti-Alloys. JOM. 66(7), 1287–1298. Springer US.
Dahotre, N. B., Banerjee, R., (2014). Integrated Experimental and Theoretical Approach for Corrosion and Wear Evaluation of Laser Surface Nitrided Ti-6Al-4V Biomaterial in Physiological Solution. 37(9), 153-164.
Zheng, Y., Williams, R., Kami, P., Nag, S., Banerjee, R., Fraser, H. (2014). Investigation of Possible Nucleation Mechanisms for Producing an Ultra-Refined Alpha Phase Microstructure in Beta Titanium Alloys Using High-Resolution Electron Microscopy and 3D Atom Probe Tomography. Microscopy and Microanalysis. 20(S3), 960–961. Cambridge University Press.
Das, D., Banerjee, R., Mitra, A. (2014). Journal of Chemical and Pharmaceutical Research, 2014, 6 (11): 108-116. Other. 6(11), 108--116.
Bhattacharya, A., Banerjee, R., Ghosh, S. (2014). KEYWORDS: plantar fasciitis, plasma rich platelet.. Other. (317), .
Borkar, T., Sosa, J., Hwang, J. Y., Scharf, T. W., Tiley, J., Fraser, H., Banerjee, R. (2014). Laser Deposited in situ TiC-Reinforced Nickel Matrix Composites: 3D Microstructure and Tribological Properties. Journal of Minerals, Metals and Materials (JOM) Society, Vol. 53, No. 9, pp. 66(6), 935-942.
Dahotre, S. N., Vora, H. D., Rajamure, R. S., Huang, L., Banerjee, R., He, W., Dahotre, N. B. (2014). Laser induced nitrogen enhanced titanium surfaces for improved osseo-integration. Annals of Biomedical Engineering. 42(1), 50–61. Springer US.
Rojhirunsakool, T., Singh, A., Nag, S., Tiley, J., Banerjee, R. (2014). Multi-Scale Characterization of Different Generations of Gamma Prime Precipitates in Nickel-based Superalloys Using Correlative Microscopy Techniques. Microscopy and Microanalysis. 20(S3), 988–989. Cambridge University Press.
Alam, T., Kami, P., Cao, L., Nag, S., Bettles, C., Wu, X., Banerjee, R. (2014). On the Role of C Addition on $\alpha$ Precipitation in a $\beta$ Titanium Alloy. Metallurgical and Materials Transactions A. 45(3), 1089--1095. Springer US.
Alam, T., Kami, P., Cao, L., Nag, S., Bettles, C., Wu, X., Banerjee, R. (2014). On the Role of C Addition on $α$ Precipitation in a $β$ Titanium Alloy. Metallurgical and Materials Transactions A. 45(3), 1089–1095. Springer US.
Meher, S., Banerjee, R. (2014). Partitioning and site occupancy of Ta and Mo in Co-base $\gamma$/$\gamma$′ alloys studied by atom probe tomography. Intermetallics. 49, 138--142. Elsevier.
Meher, S., Banerjee, R. (2014). Partitioning and site occupancy of Ta and Mo in Co-base $γ$/$γ$’ alloys studied by atom probe tomography. Intermetallics. 49, 138–142. Elsevier.
Meher, S., Banerjee, R. (2014). Partitioning and site occupancy of Ta and Mo in Co-base gamma/gamma ' alloys studied by atom probe tomography. Intermetallics. 49, 138-142.
Stephenson, L. T., Ceguerra, A. V., Li, T., Rojhirunsakool, T., Nag, S., Banerjee, R., Cairney, J. M., Ringer, S. P. (2014). Point-by-point compositional analysis for atom probe tomography. MethodsX. 1, 12–18. Elsevier.
Meher, S., Nandwana, P., Rojhirunsakool, T., Tiley, J., Banerjee, R. (2014). Probing the Crystallography of Ordered Phases by coupling Orientation Microscopy and Atom Probe Tomography. Microscopy and Microanalysis. 20(S3), 958–959. Cambridge University Press.
Srirangam, P., Chattopadhyay, S., Bhattacharya, A., Nag, S., Kaduk, J., Shankar, S., Banerjee, R., Shibata, T. (2014). Probing the local atomic structure of Sr-modified Al–Si alloys. Acta Materialia. 65, 185–193. Pergamon.
Boyne, A., Wang, D., Shi, R., Zheng, Y., Behera, A., Nag, S., Tiley, J., Fraser, H., Banerjee, R., Wang, Y. (2014). Pseudospinodal mechanism for fine $\alpha$/$\beta$ microstructures in $\beta$-Ti alloys. Acta Materialia. 64, 188--197. Pergamon.
Boyne, A., Wang, D., Shi, R., Zheng, Y., Behera, A., Nag, S., Tiley, J., Fraser, H., Banerjee, R., Wang, Y. (2014). Pseudospinodal mechanism for fine $α$/$β$ microstructures in $β$-Ti alloys. Acta Materialia. 64, 188–197. Pergamon.
Katakam, S., Devaraj, A., Bowden, M., Santhanakrishnan, S., Smith, C., Ramanujan, R., Thevuthasan, S., Banerjee, R., Dahotre, N. B. (2014). Publisher’s Note:“Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study”[J. Appl. Phys. 114, 184901 (2013)]. Journal of Applied Physics. 115(4), 049903. AIP Publishing.
Borkar, T., Nag, S., Ren, Y., Tiley, J., Banerjee, R. (2014). Reactive spark plasma sintering (SPS) of nitride reinforced titanium alloy composites. Journal of Alloys and Compounds. 617, 933–945. Elsevier.
Choudhuri, D., Dendge, N., Nag, S., Gibson, M. A., Banerjee, R. (2014). Role of applied uniaxial stress during creep testing on precipitation in Mg–Nd alloys. Materials Science and Engineering: A. 612, 140–152. Elsevier.
Choudhuri, D., Jaeger, D., Gibson, M. A., Banerjee, R. (2014). Role of Zn in enhancing the creep resistance of Mg–RE alloys. Scripta Materialia. 86, 32–35. Pergamon.
Borkar, T., Hwang, J., Hwang, J. Y., Scharf, T. W., Tiley, J., Hong, S. H., Banerjee, R. (2014). Strength versus Ductility in Carbon Nanotube Reinforced Nickel Matrix Nanocomposites. Journal of Materials Research. 29, 761-769.
Rojhirunsakool, T., Singh, A., Nag, S., Hwang, J., Tiley, J., Banerjee, R. (2014). Temporal evolution of non-equilibrium $\gamma$'precipitates in a rapidly quenched nickel base superalloy. Intermetallics. 54, 218--224. Elsevier.
Rojhirunsakool, T., Singh, A., Nag, S., Hwang, J., Tiley, J., Banerjee, R. (2014). Temporal evolution of non-equilibrium $γ$’precipitates in a rapidly quenched nickel base superalloy. Intermetallics. 54, 218–224. Elsevier.
Bhattacharya, A., Banerjee, R., Ghosh, S. (2014). USE OF PLATELET-RICH PLASMA INJECTION FOR THE TREATMENT OF CHRONIC PLANTAR FASCITIS. Other. 1(12), 1498--1493.
Tiley, J. S., Senkov, O., Viswanathan, G., Nag, S., Hwang, J., Banerjee, R. (2013). A Methodology for Determination of $\gamma$′ Site Occupancies in Nickel Superalloys Using Atom Probe Tomography and X-ray Diffraction. Metallurgical and Materials Transactions A. 44(1), 31--38. Springer US.
Banerjee, R. (2013). A methodology for determination of γ' site occupancies in nickel superalloys using atom probe tomography and x-ray diffraction.
Banerjee, R., Banerjee, S. (2013). A study of perceived organizational justice, trust and organisational citizenship behaviour. Other. 12(4), 36--43.
Dillon, E., Noh, K. W., Standing, M. D., Heckmann, R. A., Schilling, A., Barton, B., Jinschek, J. R., Mele, L., Dona, P., Ringnalda, J., others, (2013). About Materials Science. Journal of Materials Research. 28(21/14), .
Devaraj, A., Nag, S., Banerjee, R. (2013). Alpha phase precipitation from phase-separated beta phase in a model Ti--Mo--Al alloy studied by direct coupling of transmission electron microscopy and atom probe tomography. Scripta Materialia. 69(7), 513--516. Pergamon.
Banerjee, R. (2013). Alpha phase separation from phase-separated beta phase in a model Ti-Mo-Al alloy studied by direct coupling of transmission electron microscopy and atom probe tomography.
Banerjee, R. (2013). An integrated experimental and computational approach to laser surface nitriding of Ti-6Al-4V.
Banerjee, R. (2013). Coarsening behavior of gamma prime precipitates and concurrent transitions in the interface width in Ni-14at%Al-7at%Cr.
Meher, S., Rojhirunsakool, T., Hwang, J., Nag, S., Tiley, J., Banerjee, R. (2013). Coarsening behaviour of gamma prime precipitates and concurrent transitions in the interface width in Ni-14 at.\% Al-7 at.\% Cr. Philosophical Magazine Letters. 93(9), 521--530. Routledge.
Banerjee, R. (2013). Coarsening kinetics of γ'precipitates in cobalt-base alloys.
Nag, S., Devaraj, A., Gupta, N., Williams, R., Srivilliputhur, S. G., Fraser, H., Banerjee, R. (2013). Coupling Atom Probe Tomography with Aberration-Corrected Scanning Transmission Electron Microscopy and First-Principles Computations to Investigate Omega Precipitation in Titanium Alloys. Microscopy and Microanalysis. 19(S2), 946--947. Cambridge University Press.
Meher, S., Nag, S., Williams, R., Srinivasan, R., Fraser, H., Banerjee, R. (2013). Direct Atomic Scale Observation of the Structure and Chemistry of Order/Disorder $\gamma$’/$\gamma$ Interfaces in Nickel Base Superalloys. Microscopy and Microanalysis. 19(S2), 944--945. Cambridge University Press.
Hwang, J. Y., Banerjee, R., Diercks, D. R., Kaufman, M. J. (2013). Direct Observation of Heterogeneous Nucleation in Al-Si-Cu-Mg Alloy Using Transmission Electron Microscopy and Three-dimensional Atom Probe Tomography. Other. 43(3), 122--126. Korean Society of Microscopy.
Banerjee, R. (2013). Evolution of a honeycomb network of precipitates in a hot-rolled commercial Mg-Y-Nd-Zr alloy.
Rojhirunsakool, T., Meher, S., Hwang, J., Nag, S., Tiley, J., Banerjee, R. (2013). Influence of composition on monomodal versus multimodal $\gamma$′ precipitation in Ni--Al--Cr alloys. Journal of Materials Science. 48(2), 825--831. Springer US.
Banerjee, R. (2013). Influence of composition on monomodal versus multimodal gamma prime precipitation in Ni-Al-Cr alloys.
Behera, A., Nag, S., Mahdak, K., Mohseni, H., Tiley, J., Banerjee, R. (2013). Influence of oxygen ingress on fine scale precipitation of $\alpha$-Ti during oxidation of Beta21S $\beta$-Ti alloy. Journal of Materials Science. 48(19), 6700--6706. Springer US.
Banerjee, R. (2013). Interface analysis of ultra-high strength carbon nanotube / nickel composites processed by molecular-level mixing.
Katakam, S., Devaraj, A., Bowden, M., Santhanakrishnan, S., Smith, C., Ramanujan, R. V., Thevuthasan, S., Banerjee, R., Dahotre, N. B. (2013). Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study. Journal of Applied Physics. 114(18), 184901. AIP.
Banerjee, R. (2013). Laser deposited biocompatible Ca-P coatings on Ti-6Al-4V: Microstructural evolution and thermal modeling.
Santhanakrishnan, S., Kumar, N., Dendge, N., Choudhuri, D., Katakam, S., Palanivel, S., Vora, H., Banerjee, R., Mishra, R., Dahotre, N. B. (2013). Macro-and Microstructural Studies of Laser-Processed WE43 (Mg-Y-Nd) Magnesium Alloy. Metallurgical and Materials Transactions B. 44(5), 1190–1200. Springer US.
Singh, A., Nag, S., Chattopadhyay, S., Ren, Y., Tiley, J., Viswanathan, G., Fraser, H., Banerjee, R. (2013). Mechanisms related to different generations of $\gamma$′ precipitation during continuous cooling of a nickel base superalloy. Acta Materialia. 61(1), 280--293. Pergamon.
Banerjee, R. (2013). Mechanisms related to different generations of γ' precipitation during continuous cooling of a nickel base superalloy.
Santos-Ortiz, R., Volkov, V., Schmid, S., Kuo, F., Kisslinger, K., Nag, S., Banerjee, R., Zhu, Y., Shepherd, N. D. (2013). Microstructure and electronic band structure of pulsed laser deposited iron fluoride thin film for battery electrodes. ACS Applied Materials & Interfaces. 5(7), 2387–2391. American Chemical Society.
Banerjee, R. (2013). Microstructure and electronic band structure of pulsed laser deposited iron fluoride thin films for battery electrodes.
Banerjee, R. (2013). Precipitation in uniaxially stressed Mg-Nd alloys during creep testing.
Banerjee, R. (2013). The influence of precipitation of alpha2 on properties and microstructure in TIMETAL 6-4.
Banerjee, R. (2012). Effect of specimen thickness on the creep response of a Ni-based single-crystal superalloy.
Devaraj, A., Nag, S., Srinivasan, R., Williams, R., Banerjee, S., Banerjee, R., Fraser, H. (2012). Experimental evidence of concurrent compositional and structural instabilities leading to $\omega$ precipitation in titanium--molybdenum alloys. Acta Materialia. 60(2), 596--609. Pergamon.
Banerjee, R. (2012). Experimental evidence of concurrent compositional and structural instabilities leading to ω precipitation in titanium-molybdenum alloys.
Nag, S., Banerjee, R. (2012). Fundamentals of medical implant materials. Other. 23, 6--17. Materials Park (OH): ASM International\textregistered.
Banerjee, R. (2012). Improved corrosion and wear resistance of Mg alloys via laser surface modification of Al on AZ31B.
Banerjee, R. (2012). In situ laser synthesis of Fe-based amorphous matrix composite coating on structural steel.
Banerjee, R. (2012). In situ nitridation of titanium-molybdenum alloys during laser deposition.
Banerjee, R. (2012). Laser deposition and deformation behavior of Ti-Nb-Zr-Ta alloys for orthopedic implants.
Katakam, S., Hwang, J. Y., Vora, H., Harimkar, S. P., Banerjee, R., Dahotre, N. B. (2012). Laser-induced thermal and spatial nanocrystallization of amorphous Fe--Si--B alloy. Scripta Materialia. 66(8), 538--541. Pergamon.
Banerjee, R. (2012). Laser-induced thermal and spatial nanocrystallization of an amorphous Fe-Si-B alloy.
Pal, P., Banerjee, R., Banerjee, R., Mookerjee, A., Kaphle, G. C., Sanyal, B., Hellsvik, J., Eriksson, O., Mitra, P., Majumdar, A., others, (2012). Magnetic ordering in Ni-rich NiMn alloys around the multicritical point: Experiment and theory. Physical Review B. 85(17), 174405. American Physical Society.
Borkar, T., Chang, W. S., Hwang, J. Y., Shepherd, N. D., Banerjee, R. (2012). Microstructural and optical properties of nanocrystalline ZnO deposited onto vertically aligned carbon nanotubes by physical vapor deposition. Materials Research Bulletin. 47(10), 2756–2759. Pergamon.
Banerjee, R. (2012). Microstructural and optical property of nanocrystalline ZnO deposited on vertically aligned carbon nanotubes by physical vapor deposition.
Nag, S., Zheng, Y., Williams, R., Devaraj, A., Boyne, A., Wang, Y., Collins, P., Viswanathan, G., Tiley, J., Muddle, B., others, (2012). Non-classical homogeneous precipitation mediated by compositional fluctuations in titanium alloys. Acta Materialia. 60(18), 6247--6256. Pergamon.
Nandwana, P., Nag, S., Hill, D. W., Tiley, J., Fraser, H., Banerjee, R. (2012). On the correlation between the morphology of $\alpha$ and its crystallographic orientation relationship with TiB and $\beta$ in boron-containing Ti--5Al--5Mo--5V--3Cr--0.5 Fe alloy. Scripta Materialia. 66(8), 598--601. Pergamon.
Banerjee, R. (2012). On the correlation between the morphology of alpha and its crystallographic orientation relationship with TiB and beta in boron-containing Ti-5Al-5Mo-5V-3Cr-0.5Fe alloy.
Chaudhari, M., Singh, A., Gopal, P., Nag, S., Viswanathan, G., Tiley, J., Banerjee, R., Du, J. (2012). Site occupancy of chromium in the $\gamma$′-Ni3Al phase of nickel-based superalloys: a combined 3D atom probe and first-principles study. Philosophical Magazine Letters. 92(9), 495--506. Taylor \& Francis Group.
Meher, S., Yan, H., Nag, S., Dye, D., Banerjee, R. (2012). Solute partitioning and site preference in $\gamma$/$\gamma$′ cobalt-base alloys. Scripta Materialia. 67(10), 850--853. Pergamon.
Banerjee, R. (2012). Solute partitioning and site preference in γ/γ' Cobalt base alloys.
Banerjee, R., Banerjee, S., Patwardhan, M. (2012). Strength of Psychological Contract: A Predictor of Organizational Effectiveness. Other. 1(4), 49. Publishing India Group.
Banerjee, R. (2012). Stress-induced selective nano-crystallization in laser-processed amorphous Fe-Si-B alloys.
Evans, N. D., Caballero, F., Wolverton, C. M., Seidman, D. N., Banerjee, R. (2012). Symposium: Approaches for Investigating Phase Transformations at the Atomic Scale. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science. 43(11), 3957.
Nag, S., Banerjee, R. (2012). University of North Texas,“. Other. 23, .
Nag, S., Williams, R., Devaraj, A., Collins, P. C., Viswanathan, G., Banerjee, R., Fraser, H. (2011). Atomic Scale Investigation of Alpha Nucleation in the Beta Matrix of Titanium Alloys. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.
Singh, A., Viswanathan, G., Nag, S., Hwang, J., Tiley, J., Fraser, H., Banerjee, R. (2011). Atomic Scale Investigation of Gamma Prime Precipitation in Nickel Base Alloys Coupling Aberration-Corrected STEM with Atom Probe Tomography. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.
Viswanathan, G., Banerjee, R., Srinivasan, R., Nag, S., Shiveley, A., Tiley, J., Fraser, H. (2011). Atomic Scale Investigation of Nano Structures in Ni-Based Superalloy through Advanced Characterization. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.
Banerjee, R. (2011). Competing martensitic, bainitic, and pearlitic transformations in a hypoeutectoid Ti-5Cu alloy.
Singh, A., Nag, S., Hwang, J., Viswanathan, G., Tiley, J., Srinivasan, R., Fraser, H., Banerjee, R. (2011). Influence of cooling rate on the development of multiple generations of $\gamma$′ precipitates in a commercial nickel base superalloy. Materials Characterization. 62(9), 878--886. Elsevier.
Banerjee, R. (2011). Influence of cooling rate on the development of multiple generations of gamma prime precipitates in a commercial nickel base superalloy.
Devaraj, A., Nag, S., Williams, R., Rajagopalan, S., Srivilliputhur, S. G., Fraser, H., Banerjee, R. (2011). Investigating Omega Precipitation in Titanium Alloys at the Atomic Scale. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.
Singh, A. R. (2011). Mechanisms of ordered gamma prime precipitation in nickel base superalloys.
Banerjee, R. (2011). Microstructural evolution in laser deposited nickel-titanium-carbon in situ metal matrix composites.
Banerjee, R. (2011). Novel hexagonal polytypes of silver: growth, characterization, and first-principles calculations.
Banerjee, R. (2011). Novel mixed-mode phase transition involving a composition-dependent displacive component.
Nag, S., Devaraj, A., Srinivasan, R., Williams, R., Gupta, N., Viswanathan, G., Tiley, J., Banerjee, S., Srinivasan, S., Fraser, H., others, (2011). Novel mixed-mode phase transition involving a composition-dependent displacive component. Physical Review Letters. 106(24), 245701. American Physical Society.
Banerjee, R. (2011). Phase separation and formation of omega phase in the beta matrix of a Ti-V-Cu alloy.
Banerjee, R. (2011). Precipitation of ordered phases in metallic solid solutions: A synergistic clustering and ordering process.
Banerjee, R. (2011). Synthesis and characterization of self-organized multilayered graphene-carbon nanotube hybrid films.
Das, S., Seelaboyina, R., Verma, V., Lahiri, I., Hwang, J. Y., Banerjee, R., Choi, W. (2011). Synthesis and characterization of self-organized multilayered graphene–carbon nanotube hybrid films. Journal of Materials Chemistry. 21(20), 7289. Royal Society of Chemistry (RSC). http://dx.doi.org/10.1039/c1jm10316d
Maneshian, M. H., Kuo, F., Mahdak, K., Hwang, J., Banerjee, R., Shepherd, N. D. (2011). The influence of high dielectric constant aluminum oxide sputter deposition on the structure and properties of multilayer epitaxial graphene. Nanotechnology. 22(20), 205703. IOP Publishing.
Lahiri, I., Oh, S., Hwang, J. Y., Kang, C., Choi, M., Jeon, H., Banerjee, R., Sun, Y., Choi, W. (2011). Ultrathin alumina-coated carbon nanotubes as an anode for high capacity Li-ion batteries. Journal of Materials Chemistry. 21(35), 13621. Royal Society of Chemistry (RSC). http://dx.doi.org/10.1039/c1jm11474c
Maneshian, M., Mahdak, K., Kuo, F., Hwang, J., Banerjee, R., Shepherd, N. (2010). Atomic scale characterization of titanium Ohmic contacts to SiC using three dimensional atom probe tomography and high resolution transmission electron microscopy. Applied Physics Letters. 97(2), 024103. AIP.
Banerjee, R. (2010). Atomic scale characterization of titanium ohmic contacts to silicon carbide using three-dimensional atom probe tomography and high resolution transmission electron microscopy.
Banerjee, R. (2010). Bulk nickel-carbon nanotube nanocomposites by laser deposition.
Banerjee, R. (2010). Corrosion resistance and in vitro response of laser-deposited Ti-Nb-Zr-Ta alloys for orthopedic implant applications.
Lahiri, I., Seelaboyina, R., Hwang, J. Y., Banerjee, R., Choi, W. (2010). Enhanced field emission from multi-walled carbon nanotubes grown on pure copper substrate. Carbon. 48(5), 1531--1538. Pergamon.
Banerjee, R. (2010). Enhanced field emission from multi-walled carbon nanotubes grown on pure copper substrates.
Banerjee, R. (2010). High capacity and excellent stability of lithium ion battery using interface-controlled binder-free multi-walled carbon nanotubes grown on copper.
Banerjee, R., Nag, S. (2010). Laser processing of orthopedic biomaterials. Other. 277--322. John Wiley \& Sons, Inc..
Banerjee, M., Mookerjee, A., Majumdar, A., Banerjee, R., Sanyal, B., Nigam, A. (2010). Magnetism in FeNiW disordered alloys: Experiment and theory. Journal of Magnetism and Magnetic Materials. 322(21), 3558--3564. North-Holland.
Tiley, J., Viswanathan, G., Shiveley, A., Tschopp, M., Srinivasan, R., Banerjee, R., Fraser, H. (2010). Measurement of $\gamma$′ precipitates in a nickel-based superalloy using energy-filtered transmission electron microscopy coupled with automated segmenting techniques. Micron. 41(6), 641--647. Pergamon.
Banerjee, R. (2010). Measurement of gamma prime precipitates in a nickel-based superalloy using energy-filtered transmission electron microscopy coupled with automated segmentation techniques.
Banerjee, R. (2010). Templated growth of hexagonal nickel carbide nanocrystals on vertically aligned carbon nanotubes.
Srinivasan, R., Banerjee, R., Viswanathan, G., Nag, S., Hwang, J., Tiley, J., Fraser, H. (2010). The use of advanced characterization to study transitions across solid state interfaces. JOM. 62(12), 64--69. Springer US.
Banerjee, R. (2010). The use of advanced characterization to study transitions across solid-solid interfaces.
Lahiri, I., Oh, S., Hwang, J. Y., Cho, S., Sun, Y., Banerjee, R., Choi, W. (2010). High Capacity and Excellent Stability of Lithium Ion Battery Anode Using Interface-Controlled Binder-Free Multiwall Carbon Nanotubes Grown on Copper. ACS Nano. 4(6), 3440-3446. American Chemical Society (ACS). http://dx.doi.org/10.1021/nn100400r
Lahiri, I., Oh, S. W., Hwang, J. Y., Cho, S., Sun, Y. K., Banerjee, R., Choi, W. (2010). High capacity and excellent stability of lithium ion battery anode using interface-controlled binder-free multiwall carbon nanotubes grown on copper.. ACS Nano. 4(6), 3440-6.
Nag, S., Banerjee, R., Srinivasan, R., Hwang, J., Harper, M., Fraser, H. (2009). $\omega$-Assisted nucleation and growth of $\alpha$ precipitates in the Ti--5Al--5Mo--5V--3Cr--0.5 Fe $\beta$ titanium alloy. Acta Materialia. 57(7), 2136--2147. Pergamon.
Banerjee, R. (2009). Application of x-ray and neutron diffraction to determine lattice parameters and precipitate volume fractions in low misfit nickel base superalloys.
Banerjee, R. (2009). Atomic scale structure and chemical composition across order-disorder interfaces.
Banerjee, R. (2009). Characterization of novel borides in Ti-Nb-Zr-Ta+2B metal-matrix composites.
Tiley, J., Viswanathan, G., Srinivasan, R., Banerjee, R., Dimiduk, D., Fraser, H. (2009). Coarsening kinetics of $\gamma$′ precipitates in the commercial nickel base Superalloy Ren\'e 88 DT. Acta Materialia. 57(8), 2538--2549. Pergamon.
Banerjee, R. (2009). Coarsening kinetics of gamma prime precipitates in the commercial nickel base superalloy Rene 88DT.
Banerjee, R. (2009). Competing effects of surface phonon softening and quantum size effects on the superconducting properties of nanostructured Pb.
Banerjee, R. (2009). Complementary techniques for the characterization of thin film Ti/Nb multilayers.
Hwang, J., Nag, S., Singh, A., Srinivasan, R., Tiley, J., Viswanathan, G., Fraser, H., Banerjee, R. (2009). Compositional variations between different generations of $\gamma$′ precipitates forming during continuous cooling of a commercial nickel-base superalloy. Metallurgical and Materials Transactions A. 40(13), 3059. Springer US.
Banerjee, R. (2009). Compositional variations between different generations of g ' precipitates forming during cooling of a commercial nickel-base superalloy.
Nag, S., Banerjee, R., Hwang, J., Harper, M., Fraser, H. (2009). Elemental partitioning between $\alpha$ and $\beta$ phases in the Ti--5Al--5Mo--5V--3Cr--0.5 Fe (Ti-5553) alloy. Philosophical Magazine. 89(6), 535--552. Taylor \& Francis.
Banerjee, R. (2009). Elemental partitioning between alpha and beta phases in the Ti-5Al-5Mo-5V-3Cr-0.5Fe (Ti-5553) alloy.
Hwang, J., Nag, S., Singh, A., Srinivasan, R., Tiley, J., Fraser, H., Banerjee, R. (2009). Evolution of the $\gamma$/$\gamma$′ interface width in a commercial nickel base superalloy studied by three-dimensional atom probe tomography. Scripta Materialia. 61(1), 92--95. Pergamon.
Banerjee, R. (2009). Evolution of the gamma/gamma prime interface width in a commercial nickel base superalloy studied by three-dimensional atom probe tomography.
Scharf, T., Rajendran, A., Banerjee, R., Sequeda, F. (2009). Growth, structure and friction behavior of titanium doped tungsten disulphide (Ti-WS2) nanocomposite thin films. Thin Solid Films. 517(19), 5666--5675. Elsevier.
Banerjee, R. (2009). Growth, structure and friction behavior of titanium doped tungsten disulphide nanocomposite thin films.
Banerjee, R. (2009). Intra-granular alpha precipitation in Ti-Nb-Zr-Ta biomedical alloys.
Devaraj, A., Williams, R., Nag, S., Srinivasan, R., Fraser, H., Banerjee, R. (2009). Investigations of omega precipitation in titanium molybdenum alloys by coupling 3D atom probe tomography and high resolution (S) TEM. Microscopy and Microanalysis. 15(2), 268.
Banerjee, R., Sengupta, P. S., Das, D. K. (2009). Multiple ovulation and Embryo transfer in Gir and Sahiwal Cattle at Haringhata Farm, West Bengal, India. Other. 36(4), 225.
Hwang, J., Banerjee, R., Tiley, J., Srinivasan, R., Viswanathan, G., Fraser, H. (2009). Nanoscale characterization of elemental partitioning between gamma and gamma prime phases in Ren\'e 88 DT nickel-base superalloy. Metallurgical and Materials Transactions A. 40(1), 24--35. Springer US.
Banerjee, R. (2009). Nanoscale Characterization of Elemental Partitioning between Gamma and Gamma Prime Phases in Rene 88DT Nickel Base Superalloy.
Banerjee, R. (2009). Omega assisted nucleation and growth of alpha precipitates in the Ti-5Al-5Mo-5V-3Cr-0.5Fe beta titanium alloy.
Banerjee, R. (2009). Phase separation in immiscible silver-copper alloy thin films.
Banerjee, R. (2009). Self-lubricating carbon nanotube reinforced nickel matrix composites.
Hwang, J., Nag, S., Singh, A., Viswanathan, G., Tiley, J., Srinivasan, R., Fraser, H., Banerjee, R. (2009). Study of Compositional Gradients Across the [gamma]/[gamma] Interface in Ni-base Superalloys Using 3D Atom Probe Tomography. Microscopy and Microanalysis. 15(S2), 308. Cambridge University Press.
Banerjee, R., Mookerjee, A. (2009). Study of phase stability of MnCr using the augmented space recursion based orbital peeling technique. Physica B: Condensed Matter. 404(14-15), 1979--1983. North-Holland.
Banerjee, R. (2009). The effect of Mg on the structure and properties of type 319 aluminum casting alloys.
Banerjee, R. (2009). The influence of nanoscale phase separation and devitrification on the electrical transport properties of amorphous Cu-Nb alloy thin films.
Banerjee, R. (2009). Three dimensional morphology and composition of omega precipitates in a binary titanium-molybdenum alloy.
Banerjee, M., Banerjee, R. (2008). A finite difference method to find velocity and temperature distribution for parallel plate channel. Other. 13(4), 875--887.
Nag, S., Gen\cc, A,, Banerjee, R., Fraser, H. (2008). Atomic Resolution Imaging of Solid State Phase Separation in a Beta-Stabilized Titanium Alloy. Microscopy and Microanalysis. 14(S2), 848. Cambridge University Press.
Banerjee, R. (2008). Atomic-scale structure and composition of tungsten carbide reinforced diamond-like carbon films.
Scharf, T., Romanes, M., Mahdak, K., Hwang, J., Banerjee, R., Evans, R., Doll, G. (2008). Atomic-scale structure and composition of tungsten carbide reinforced diamondlike carbon films. Applied Physics Letters. 93(15), 151909. AIP.
Hwang, J., Banerjee, R., Kaufman, M. (2008). Characterization of Precipitation Behavior in a Spray-Formed Al-Zn-Mg Alloy Using a Combination of Transmission Electron Microscopy and Three Dimensional Atom Probe Tomography. Microscopy and Microanalysis. 14(S2), 1240. Cambridge University Press.
Srinivasan, R., Genc, A., Banerjee, R., Hwang, J., Tiley, J., Viswanathan, G., Fraser, H. (2008). Coupling LEAP and HRSTEM to study the nanoscale structure and chemistry of interfaces. Microscopy and Microanalysis. 14(S2), 376. Cambridge University Press.
Banerjee, R. (2008). Early Stages of Crystallization in Phase Separated Amorphous Copper-Niobium Alloy Thin Films.
Banerjee, R., Crozier, P. (2008). Ex Situ and In Situ Synthesis and Characterization of Nickel Nanoparticles on High Surface Area Silica Support. Microscopy and Microanalysis. 14(S2), 282. Cambridge University Press.
Banerjee, R., Ghosh, B., Khilar, K., Boukadi, F., Bemani, A. (2008). Field application of phenol formaldehyde gel in oil reservoir matrix for water shut-off purposes. Other. 30(19), 1779--1787. Taylor \& Francis Group.
Banerjee, M., Banerjee, R. (2008). Heat transfer analysis inside a duct under laminar flow condition using variational method. Other. 13(4), 889--901.
Banerjee, R. (2008). Incipient Plasticity and Shear Band Formation in Bulk Metallic Glass Studied Using Indentation.
Banerjee, R. (2008). Influence of Synthesis Conditions on the Nanostructure of Immiscible Copper-Silver Alloy Thin Films.
Banerjee, R. (2008). JOB SUBMISSION ON GRID. Other.
Banerjee, R. (2008). Laser deposited carbon nanotube reinforced nickel matrix composites.
Gen\cc, A,, Banerjee, R., Johnson, A., Fraser, H. (2008). Probing the Composition Variations in Nanoscale Multilayers. Microscopy and Microanalysis. 14(S2), 1396. Cambridge University Press.
Banerjee, R. (2008). The Microstructure and Electrical Transport Properties of Immiscible Copper-Niobium Alloy Thin Films.
Banerjee, R. (2008). Ultra-low Breakdown Voltage and Origin of 1/f2 Noise in Metallic Nanorod Arrays.
Banerjee, R. (2008). Wear Resistance of Laser-deposited Boride-reinforced Ti-Nb-Zr-Ta Alloy Composites for Orthopedic Implants.
Banerjee, R. (2007). 3D atom probe tomography and high resolution electron microscopy of immiscible copper-niobium metallic multilayers.
Gen\cc, A,, others, (2007). 3D Atom Probe Tomography and High Resolution Electron Microscopy of Immiscible Copper/Niobium Metallic Multilayers. Microscopy and Microanalysis. 13(S02), 192. Cambridge University Press.
Banerjee, R. (2007). A Novel Combinatorial Approach for Understanding Microstructural Evolution and its Relationship to Mechanical Properties in Metallic Biomaterials.
Banerjee, M., Banerjee, R. (2007). Analysis of incompressible viscous flow through an inclined channel with isothermal walls using second law of thermodynamics. Other. 12(4), 919--928.
Banerjee, M., Banerjee, R. (2007). Application of variational method for analysis of velocity and temperature distribution of a fluid flowing through a duct. Other. 52(1/2), 51. INSTITUTE OF ATOMIC PHYSICS.
Collins, P. C., Kart, S., Searles, T., Koduri, S., Viswanathan, G., Tiley, J., Banerjee, R., Fraser, H. (2007). Design tools for structural metallic materials. Other. 19. CRC Press.
Banerjee, R. (2007). Hardness of sputter deposited nanocrystalline Ni3Al thin films.
Banerjee, R. (2007). Nanoscale Phase Separation in Amorphous Immiscible Copper-Niobium Alloy Thin Films.
Nag, S., Banerjee, R., Puthucode, A., Gen\cc, A, (2007). Probing Elemental Partitioning between Alpha and Beta Phases in Titanium Alloys Using 3D Atom Probe Tomography. Microscopy and Microanalysis. 13(S02), 1622. Cambridge University Press.
Banerjee, R. (2007). Selection of alpha variants during microstructural evolution in alpha/beta titanium alloys.
Banerjee, R. (2007). Submitting Jobs on Grid. Other.
Aryal, S., Bandyopadhyay, A., Banerjee, R., Benstetter, G., Bhattarai, SR,, Bouraoui, C., Braun, R., Chang, W., Chang, Y., Chawla, N., others, (2006). Allen, AJ 43 Altenberger, I. 4 Arakere, N. 214 Ardehali Barani, A. 194. Materials Science and Engineering: A. 426, 360--361.
Vadalakonda, S., Banerjee, R., Puthcode, A., Mirshams, R. A. (2006). Comparison of incipient plasticity in bcc and fcc metals studied using nanoindentation. Materials Science and Engineering: A. 426(1-2), 208--213. Elsevier.
Banerjee, R. (2006). Comparison of Incipient Plasticity on bcc and fcc metals studies using nanoindentation.
Vadlakonda, S., Banerjee, R., Puthcode, A., Mirshams, R. A. (2006). Corrigendum to “Comparison of incipient plasticity in bcc and fcc metals studied using nanoindentation”[Mater. Sci. Eng. A 426 (2006) 208--213]. Materials Science and Engineering: A. 434(1-2), 372. Elsevier.
Banerjee, R. (2006). Laser Deposited Ti-Nb-Zr-Ta Orthopaedic Alloys.
Banerjee, R., Nag, S., Samuel, S., Fraser, H. (2006). Laser-deposited Ti-Nb-Zr-Ta orthopedic alloys. Journal of Biomedical Materials Research Part A. 78(2), 298--305. Wiley Online Library.
Kar, S., Searles, T., Lee, E., Viswanathan, G., Fraser, H., Tiley, J., Banerjee, R. (2006). Modeling the tensile properties in $\beta$-processed $\alpha$/$\beta$ Ti alloys. Metallurgical and Materials Transactions A. 37(3), 559--566. Springer-Verlag.
Banerjee, R. (2006). Modeling the Tensile Properties in -Processed Ti Alloys.
Gen\cc, A,, Banerjee, R., Ringnalda, J., Maher, D., Fraser, H. (2006). Nano-analysis of the Metallic Multilayers Using High Resolution Microscopy. Microscopy and Microanalysis. 12(S02), 716. Cambridge University Press.
Banerjee, R. (2006). Root-like Structure at the Nanowire / Substrate Interface in GaAs Nanowires.
Banerjee, R. (2006). Size induced metal insulator transition in nanostructured Niobium thin films: Intragranular and intergranular contributions.
Bose, S., Banerjee, R., Genc, A., Raychaudhuri, P., Fraser, H. L., Ayyub, P. (2006). Size induced metal--insulator transition in nanostructured niobium thin films: intra-granular and inter-granular contributions. Journal of Physics: Condensed Matter. 18(19), 4553. IOP Publishing.
Banerjee, R. (2006). Structure of TiB Precipitates in Laser Deposited In Situ Ti-6Al-4V – TiB Composites.
Banerjee, R. (2006). Structure of Twins in GaAs Nanowires Grown by the Vapor-Liquid-Solid Process.
Banerjee, R., Bhattacharya, A., Genc, A., Arora, B. (2006). Structure of twins in GaAs nanowires grown by the vapour--liquid--solid process. Philosophical Magazine Letters. 86(12), 807--816. Taylor \& Francis.
Banerjee, R., Patil, K., Khilar, K. C. (2006). Studies on Phenol-Formaldehyde Gel Formation at a High Temperature and at Different pH. The Canadian Journal of Chemical Engineering. 84(3), 328--337. Wiley Subscription Services, Inc., A Wiley Company.
Banerjee, R. (2006). Upper critical field in nanostructured Nb: competing effects of the reduction in density of states and mean free path.
Bose, S., Raychaudhuri, P., Banerjee, R., Ayyub, P. (2006). Upper critical field in nanostructured Nb: Competing effects of the reduction in density of states and the mean free path. Physical Review B. 74(22), 224502. APS.
Banerjee, R. (2005). A Novel Combinatorial Approach to the Development of Beta Titanium Alloys for Orthopaedic Implants.
Myers, S., Vadlakonda, S., Mirshams, R. A., Banerjee, R. (2005). An SEM study on the effect of strain rate on the deformation process of amorphous Cu-Nb alloy thin films using nanoindentation. Bulletin of the American Physical Society. APS.
Banerjee, R. (2005). Combinatorial studies of mechanical properties of Ti-Al thin films using nanoindentation.
Banerjee, R. (2005). Comparison of Microstructural Evolution in Ti-Mo-Zr-Fe and Ti-15Mo Biocompatible Alloys.
HUJA, S., FERNANDEZ, S., WOODARD, S., SPERLING, E., Banerjee, R., FRASER, H. (2005). Elastic Modulus Of The Alveolar Process in Dogs.
Banerjee, R. (2005). Formation of Equiaxed Alpha in TiB Reinforced Ti Alloy Composites.
Kar, S., Banerjee, R., Lee, E., Fraser, H. (2005). Influence of crystallography variant selection on microstructure evolution in titnaium alloys. Other. 1, 4--26.
Fraser, H. L., Hill, D. W., Banerjee, R., Collins, P. C. (2005). Laser Deposition of Titanium Boride Reinforced Titanium Alloy Composites.
Banerjee, R. (2005). Mechanism of size dependence of superconductivity in nanocrystalline Nb.
Bose, S., Raychaudhuri, P., Banerjee, R., Vasa, P., Ayyub, P. (2005). Mechanism of the size dependence of the superconducting transition of nanostructured Nb. Physical Review Letters. 95(14), 147003. APS.
Banerjee, R. (2005). Microstructural Evolution and Strengthening Mechanisms in Ti-Nb-Zr-Ta, Ti-Mo-Zr-Fe and Ti-15Mo Biocompatible Alloys.
Fraser, H. L., Kar, M. S., Searles, T., Lee, E., Viswanathan, G., Banerjee, R., Tiley, J. (2005). Modeling the Tensile Properties of Alpha/Beta Titanium Alloys.
Banerjee, R. (2005). Nanoscale TiB Precipitates in Laser Deposited Ti-matrix Composites.
Banerjee, R. (2005). Photoluminescence enhancement in nanocomposite thin films of CdS-ZnO.
Banerjee, R., Fraser, H. (2005). Predicting and engineering phase stabilities in nanoscale multilayers. Transactions of the Indian Institute of Metals. 58(6), 1027--1035. INDIAN INST METALS METAL HOUSE, PLOT 13/4, BLOCK AQ, SECTOR V, SALT LAKE, CALCUTTA 700 091, INDIA.
Banerjee, R. (2005). Predicting and Engineering Phase Stability in Nanoscale Multilayers.
Banerjee, R. (2005). Rapid Characterization of Titanium Microstructural Features for Specific Modeling of Mechanical Properties.
Lee, E., Williams, R., Viswanathan, G., Banerjee, R., Fraser, H. (2004). 3D materials characterization using dual-beam FIB/SEM techniques. Microscopy and Microanalysis. 10(S02), 1128. Cambridge University Press.
Fraser, H., Welk, M. B., Collins, P. C., Banerjee, R., Toggle, M. J. (2004). A Combinatorial Approach to the Development of Novel High Temperature Titanium Alloys.
Banerjee, R. (2004). A Comparison of bcc Phase Stability in Zr/Nb and Ti/Nb Thin Film Multilayers.
Thompson, G., Banerjee, R., Dregia, S., Miller, M., Fraser, H. (2004). A comparison of pseudomorphic bcc phase stability in Zr/Nb and Ti/Nb thin film multilayers. Journal of Materials Research. 19(3), 707--715. Cambridge University Press.
Williams, R., Bhattacharyya, D., Viswanathan, G., Banerjee, R., Fraser, H. (2004). Application of FIB-tomography to the study of microstructures in titanium alloys. Microscopy and Microanalysis. 10(S02), 1178. Cambridge University Press.
Banerjee, R. (2004). Comparison of Microstructural Evolution in Laser Deposited and Arc-Melted In Situ Ti – TiB Composites.
Banerjee, R. (2004). Precipitation of Grain Boundary Alpha in a Laser Deposited Compositionally Graded Ti-8Al-xV Alloy – an Orientation Microscopy Study.
Banerjee, R. (2004). Predicting Pseudomorphic Phases in Multilayers: Hexagonal close-packed Nb in Nb/Zr.
Thompson, G., Banerjee, R., Fraser, H. (2004). Predicting pseudomorphic phases in multilayers: Hexagonal-closed-packed Nb in Nb/Zr. Applied Physics Letters. 84(7), 1082--1084. AIP.
Tiley, J., Searles, T., Lee, E., Kar, S., Banerjee, R., Russ, J., Fraser, H. (2004). Quantification of microstructural features in $\alpha$/$\beta$ titanium alloys. Materials Science and Engineering: A. 372(1-2), 191--198. Elsevier.
Banerjee, R. (2004). Quantification of Microstructural Features in Titanium Alloys.
Searles, T., Tiley, J., Tanner, A., Williams, R., Rollins, B., Lee, E., Kar, S., Banerjee, R., Fraser, H. (2004). Rapid characterization of titanium microstructural features for specific modelling of mechanical properties. Measurement Science and Technology. 16(1), 60. IOP Publishing.
Kar, M. S., Lee, E., Viswanathan, G., Banerjee, R., Fraser, H., Searles, M. T. (2004). Rapid Database Development and Neural Network Modeling of Tensile Properties of Alpha/Beta Titanium Alloys.
Bose, S., Raychaudhuri, P., Banerjee, R., Vasa, P., Ayyub, P. (2004). Size dependence of the Tc and the superconducting energy gap in nanocrystalline thin films of Nb. Other.
Ayyub, P., Vasa, P., Taneja, P., Banerjee, R., Singh, B. P. (2004). Size-enhanced, coherent photoluminescence from CdS-ZnO nanocomposite thin film. Other.
Banerjee, R. (2004). Strengthening Mechanisms in Ti-Nb-Zr-Ta and Ti-Mo-Zr-Fe Orthopaedic Alloys.
Thompson, G., Banerjee, R., Fraser, H. (2003). A Thermodynamic Approach in Tuning Phase Stability in Nanocomposite Multilayers. Other. 788, . Cambridge University Press.
Banerjee, R. (2003). Direct Laser Deposition of In Situ Ti-6Al-4V - TiB Composites.
Banerjee, R. (2003). Influence of Ar/N2 ratio on the preferred orientation and optical reflectance of reactively sputter deposited Titanium Nitride thin films.
Banerjee, R., Singh, K., Ayyub, P., Totlani, M., Suri, A. (2003). Influence of the Ar/N 2 ratio on the preferred orientation and optical reflectance of reactively sputter deposited titanium nitride thin films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. 21(1), 310--317. AVS.
Banerjee, R. (2003). Laser Deposition of Compositionally Graded Titanium-Vanadium and Titanium-Molybdenum Alloys.
Banerjee, R. (2003). Lattice Expansion in Nanocrystalline Niobium Thin Films.
Banerjee, R., Collins, P., Bhattacharyya, D., Banerjee, S., Fraser, H. (2003). Microstructural evolution in laser deposited compositionally graded $\alpha$/$\beta$ titanium-vanadium alloys. Acta Materialia. 51(11), 3277--3292. Pergamon.
Banerjee, R. (2003). Microstructural Evolution in Laser Deposited Compositionally Graded Titanium-Vanadium Alloys.
Banerjee, R. (2003). Microstructural Evolution in Laser Deposited Ni-25at%Mo Alloy.
Banerjee, R., Ayyub, P., Thompson, G., Chandra, R., Taneja, P., Fraser, H. (2003). Microstructure and magnetic, transport, and optical properties of ordered and disordered Ni-25Al alloy thin films. Thin Solid Films. 441(1-2), 255--260. Elsevier.
Banerjee, R. (2003). Microstructure, magnetic, transport, and optical properties of ordered and disordered Ni-25Al alloy thin films.
Banerjee, R. (2003). Phase Stability of bcc Zr in Nb/Zr Thin Film Multilayers.
Banerjee, R. (2003). Processing and Microstructural Characterization of Sputter Deposited Ni/Ni3Al Multilayered Thin Films.
Sperling, E. A., Banerjee, R., Thompson, G. B., Fain, J. P., Anderson, P. M., Fraser, H. L. (2003). Processing and microstructural characterization of sputter-deposited Ni/Ni 3 Al multilayered thin films. Journal of Materials Research. 18(4), 979--987. Cambridge University Press.
Banerjee, R. (2003). Proximity effect in Nb/Zr multilayers with variable Nb/Zr ratio.
Thompson, G., Banerjee, R., Fraser, H. (2003). Specimen Dependent Milling Directions for Correct Phase Identification in Multilayerd Thin Films. Microscopy and Microanalysis. 9(S02), 370--371. Cambridge University Press.
Banerjee, R. (2003). Sputter Deposited Nanocrystalline Ni-25Al Alloy Thin Films and Ni/Ni3Al Multilayers.
Banerjee, R. (2003). The influence of the enthalpy of mixing during the laser deposition of complex titanium alloys using elemental blends.
Banerjee, R. (2003). Tuning Phase Stability in Nanocomposite Multilayers.
Thompson, G., Miller, M., Banerjee, R., Fraser, H. (2003). Understanding Phase Stability in Multilayers by Atom Probe Analysis. Microscopy and Microanalysis. 9(S02), 50--51. Cambridge University Press.
Thompson, G., Banerjee, R., Zhang, X., Anderson, P., Fraser, H. (2002). Chemical ordering and texture in Ni--25 at\% Al thin films. Acta Materialia. 50(3), 643--651. Pergamon.
Banerjee, R. (2002). Chemical Ordering and Texture in Sputter Deposited Ni3Al Thin Films.
Altman, E., Angelov, A., Aracil, J., Arora, D., Ashbell, G., Ashby, R., Attaway, H., Azrieli, A., Banerjee, R., Battaglia-Brunet, F., others, (2002). Ignatiadis I, 154. Journal of Industrial Microbiology & Biotechnology. 28, 350.
Thompson, G., Banerjee, R., Dregia, S., Fraser, H. (2002). Influence of Interfaces on the Phase Stability in Nanostructured Thin Film Multilayers. Other. 727, . Cambridge University Press.
Banerjee, R. (2002). Influence of the Sputtering Gas on the Preferred Orientation of Nanocrystalline Titanium Nitride Thin Films.
Banerjee, R. (2002). Laser Deposition of In Situ Ti – TiB Composites.
Banerjee, R., Amancherla, S., Banerjee, S., Fraser, H. (2002). Modeling of site occupancies in B2 FeAl and NiAl alloys with ternary additions. Acta Materialia. 50(3), 633--641. Pergamon.
Banerjee, R. (2002). Phase Evolution in Laser Deposited Titanium-Chromium Alloys.
Banerjee, R. (2002). Photoconductivity in Sputter-Deposited CdS and CdS-ZnO Nanocomposite Thin Films.
Banerjee, R. (2002). Site Occupancies in B2 FeAl and NiAl Alloys with Ternary Additions.
Banerjee, R. (2002). Unexpected Nanoscale Phase Separation in Sputter Deposited Ni-25at%Al Thin Films.
Banerjee, R., Thompson, G., Viswanathan, G., Fraser, H. (2002). Unexpected nanoscale phase separation in sputterdeposited Ni-25 at.\% Al thin films. Philosophical Magazine Letters. 82(11), 623--640. Taylor \& Francis Group.
Banerjee, R. (2001). Direct Laser Deposition of Alloys From Elemental Powder Blends.
Banerjee, R. (2001). Effect of Si on the Microstructure of Pulsed Laser Ablated Ferroelectric PbTiO3 Thin Films.
Banerjee, R., Purandare, S., Palkar, V., Pinto, R. (2001). Effect of silicon on the microstructure of pulsed laser ablated ferroelectric PbTiO3 thin films. Journal of Physics D: Applied Physics. 34(7), 1037. IOP Publishing.
Banerjee, R., Fain, J. P., Anderson, P. M., Fraser, H. L. (2001). Influence of crystallographic orientation and layer thickness on fracture behavior of Ni/Ni3Al multilayered thin films. Scripta Materialia. 44(11), 2629--2633. Pergamon.
Banerjee, R. (2001). Influence of Crystallographic Texture and Layer Thickness on Fracture Behavior of Ni/Ni3Al Multilayered Thin Films.
Banerjee, R. (2001). Microstructural Characterization of Aqueous Sol Derived Ferroelectric PbTiO3 Thin Films.
Banerjee, R., Amancherla, S., Banerjee, S., Jones, I., Fraser, H. (2001). Modelling of site occupancies in ternary B2 compounds in Nb-Ti-Al. Philosophical Magazine A. 81(4), 777--795. Taylor \& Francis Group.
Taneja, P., Banerjee, R., Ayyub, P., Dey, G. (2001). Observation of a hexagonal (4 H) phase in nanocrystalline silver. Physical Review B. 64(3), 033405. American Physical Society.
Banerjee, R. (2001). Observation of the 4H Phase in Silver Nanoparticles.
Banerjee, R. (2001). Site Occupancies in Ternary B2 Compounds in Nb-Ti-Al Alloys.
Banerjee, R. (2001). Structure and Properties of Nanocrystalline Ag and Cu2O Synthesized by High Pressure Sputtering.
Banerjee, R., Ghosh, S. (2000). Canonical transformations and soldering (vol 482, pg 302, 2000). Other. 489(3-4), 440--440. ELSEVIER SCIENCE BV PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS.
Banerjee, R., Jayakrishnan, R., Ayyub, P. (2000). Effect of the size-induced structural transformation on the band gap in CdS nanoparticles. Journal of Physics: Condensed Matter. 12(50), 10647. IOP Publishing.
Amancherla, S., Banerjee, R., Banerjee, S., Fraser, H. (2000). Ordering in ternary B2 alloys. Other. 18(4-5), 245--252. Elsevier.
Banerjee, R. (2000). Phase Evolution During Crystallization of Sputter Deposited Amorphous Ti-Al Alloy Thin Films.
Banerjee, R., Swaminathan, S., Wheeler, R., Fraser, H. L. (2000). Phase evolution during crystallization of sputter-deposited amorphous titanium--aluminium alloy thin films: Dimensional and solute effects. Philosophical Magazine A. 80(8), 1715--1727. Taylor \& Francis Group.
Banerjee, R. (2000). Size Induced Structural Transitions in CdS Nanoparticles.
Banerjee, R., Ahuja, R., Fraser, H. (1999). Banerjee, Ahuja, and Fraser Reply. Physical Review Letters. 82(9), 2003. American Physical Society.
Banerjee, R. (1999). Dimensionally Induced Structural Transformations in Titanium-Aluminum Multilayers-Reply.
Banerjee, D., Banerjee, R., Wang, Y. (1999). Formation of split patterns of $\gamma$′ precipitates in Ni-Al via particle aggregation. Scripta Materialia. 41(9), 1023--1030. Pergamon.
Banerjee, R. (1999). Formation of Split Patterns of gamma' precipitates in Ni-Al via Particle Aggregation.
Fain, J. P., Banerjee, R., Josell, D., Anderson, P. M., Fraser, H., Tymiak, N., Gerberich, W. (1999). Morphological Stability of Ni (Al)/Ni 3 Al Nanolaminate Composites. Other. 581, . Cambridge University Press.
Banerjee, R. (1999). Phase Stability In Al/Ti Multilayers.
Banerjee, R. (1999). Stability of fcc Ti in Ti / Al Multilayers.
Banerjee, R., Dregia, S. A., Fraser, H. L. (1999). Stability of fcc titanium in titanium/aluminum multilayers. Acta Materialia. 47(15-16), 4225--4231. Pergamon.
Banerjee, R. (1998). Polymorphic Phase Stability in Thin Multilayers.
Sharma, S., Das, D., Banerjee, R. (1997). A simple modification of the magnetron sputtering method for the deposition of boron-doped hydrogenated microcrystalline silicon films with enhanced doping efficiency. Thin Solid Films. 298(1-2), 200--210. Elsevier.
Kumar, T., Banerjee, R., Choudhuri, B. (1997). Modern Well Testing: a Tool for Reservoir Description and Well Optimization. Other. 48--53. THE INSTITUTION OF ENGINEERS (INDIA).
Dregia, S., Banerjee, R., Fraser, H. (1997). Structural Stability Diagrams for Thin-Film Multilayers. Other. 481, . Cambridge University Press.
Banerjee, R. (1996). Crystallization of Amorphous Phase in Sputter Deposited Ti-Al Alloy Thin Films.
Banerjee, R. (1996). Dimensionally Induced Structural Transformations in Titanium-Aluminum Multilayers.
Das, D., Sharma, S., Banerjee, D., Barua, A., Banerjee, R. (1996). Influence of chamber pressure on optoelectronic and structural properties of boron-doped hydrogenated silicon films prepared by RF magnetron sputtering. Japanese Journal of Applied Physics. 35(5R), 2548. IOP Publishing.
Banerjee, R. (1996). Structural and Phase Transformations in Thin Film Ti-aluminides and Ti/Al Multilayers.
Banerjee, R., Zhang, X., Dregia, S., Fraser, H. (1996). Synthesis of nanocomposite thin film Ti/Al multilayers and Ti-aluminides. Other. 457, . Cambridge University Press.
Banerjee, R. (1995). Decomposition of Quasicrystalline Phase in Rapidly Solidified Mg32(Al,Zn)49 Alloy.
Banerjee, R., Savalia, R., Prakash, D., Kulkarni, U., Dey, G. (1995). Decomposition of the quasicrystalline phase in rapidly solidified Mg32Al17Zn32 alloy. Scripta Metallurgica et Materialia. 32(10), 1607--1610. Pergamon.
Chattopadhyay, S., Banerjee, R. (1995). Hydrogenated amorphous silicon films deposited at high growth rates by the cathode heating technique: Properties and light induced degradation. Solar Energy Materials and Solar Cells. 36(1), 65--80. North-Holland.
Banerjee, R., Swaminathan, S., Wheeler, R., Fraser, H. (1995). Phase Evolution During Crystallization of Amorphous Titanium Aluminide Thin Films: Effect Mn and Nb Additions. Other. 400, . Cambridge University Press.
Banerjee, R. (1995). Resistivity of titanium-aluminum multilayered thin films.
Banerjee, R., Bhattacharyya, T., Sharma, S., Batabyal, A., Barua, A., Banerjee, D., Bhusari, D., Kshirsagar, S. (1995). Role of boron in the structural and electronic properties of hydrogenated silicon films deposited by rf magnetron sputtering. Philosophical Magazine B. 71(2), 115--125. Taylor \& Francis Group.
Bhattacharyya, T., Das, D., Banerjee, R., Barua, A. (1995). Study of the active layer in hydrogenated amorphous silicon solar cells using electrical and analytical techniques. Solar Energy Materials and Solar Cells. 39(1), 99--108. North-Holland.
Gangopadhyay, U., Sarkar, C., Saha, H., Mukherjee, M., Bhattacharya, T., Banerjee, R. (1994). Effect of parasitic resistances on electrical characteristics of an amorphous silicon TFT. Microelectronics Journal. 25(1), 27--32. Elsevier.
Sharma, S. N., Bose, S., Banerjee, R., Batabyal, A. K., Banerjee, D., Bhattacharya, R. (1994). Electronic and Structural Characterisation of Boron-Doped Hydrogenated Silicon Thin and Ultrathin Films Prepared by RF Magnetron Sputtering. Japanese Journal of Applied Physics. 33(1R), 42. IOP Publishing.
Mihailova, T., Toneva, A., Orel, Z. C., Orel, B., Riither, R., Livingstone, J., Chaudhuri, P., Ray, S., Batabyal, A., Barua, A., others, (1994). ELSEVIER Solar Energy Materials and Solar Cells 36 (1994) 477-480. Solar Energy Materials and Solar Cells. 36, 477--480.
Banerjee, R., Prabhu, N., Savalia, R., Prakash, D., Kulkarni, U., Dey, G. (1994). Formation of metastable phases in rapidly solidified Mg [sub 32](Al [sub x] Zn [sub 1 [minus] x])[sub 49] alloys. Other. 31(5), .
Banerjee, R. (1994). Formation of Metastable Phases in Rapidly Solidified Mg32(Al,Zn)49 Alloys.
Chattopadhyay, S., Sharma, S., Banerjee, R., Bhusari, D., Kshirsagar, S., Chen, Y., Williamson, D. (1994). Short-range order, microstructure and their correlation with light-induced degradation in hydrogenated amorphous silicon deposited at high growth rates by cathode heating technique. Journal of Applied Physics. 76(9), 5208--5213. AIP.
Banerjee, R., Sharma, S., Chattopadhyay, S., Batabyal, A., Barua, A. (1993). Control of powder formation in silane discharge by cathode heating and hydrogen dilution for high-rate deposition of hydrogenated amorphous silicon thin films. Journal of Applied Physics. 74(7), 4540--4545. AIP.
Bhattacharyya, T., Chaudhuri, P., Banerjee, R. (1993). Correlation of the structural properties with the device characteristics of hydrogenated amorphous silicon deposited at different substrate temperatures. Journal of Applied Physics. 74(5), 3211--3214. AIP.
Banerjee, R., Sharma, S., Bandyopadhyay, A., Batabyal, A., Barua, A. (1993). Effect of hydrogen flow rate on the properties of magnetron sputtered hydrogenated microcrystalline silicon. Journal of Materials Science Letters. 12(16), 1316--1319. Kluwer Academic Publishers.
Banerjee, R. (1993). Evolution of Invariant Phase Reactions in Simple Binary Phase Diagrams.
Banerjee, R., De, A., Ray, S., Barua, A., Reddy, SR, (1993). Hydrogen plasma degradation of SnO2: F films prepared by the APCVD method. Journal of Physics D: Applied Physics. 26(12), 2144. IOP Publishing.
Banerjee, R. (1993). Microstructural Studies on Rapidly Solidified Mg32(AlxZn1-x)49 Potentially Quasicrystal Forming Alloys.
Banerjee, R. (1992). The Lattice Invariant Shear in Ni-Ti Shape Memory Alloy Martensites.
Gurtov, V., Badila, M., Bandyopadhyay, A., Banerjee, R., Bange, K., Banvillet, H., Barua, A., Basa, D., Batabyal, A., Blackmore, G., others, (1990). Garg, JC, 505 Garg, P., 505 Gulino, DA, 351 Gupta, NP, 157. Thin Solid Films. 192, 397.
Banerjee, R., Das, D., Batabyal, A., Barua, A. (1989). Effect of deposition temperature on the properties of magnetron sputtered hydrogenated amorphous silicon films. Japanese Journal of Applied Physics. 28(8R), 1320. IOP Publishing.
Bandyopadhyay, A., Banerjee, R., Batabyal, A., Barua, A., Okushi, H., Tanaka, K. (1989). Effect of Light Soaking Temperature on the Metastable Defect Distribution in Magnetron Sputtered Hydrogenated Amorphous Silicon Films. Japanese Journal of Applied Physics. 28(10A), L1704. IOP Publishing.
Pantelides, S. T., Stutzmann, M., Biegelsen, D., Morigaki, K., Shimizu, T., Kumeda, M., Okushi, H., Banerjee, R., Tanaka, K., Schneider, U., others, (1989). ELECTRONIC TRANSPORT, TRAPPING AND RECOMBINATION. Other. 1, . World Scientific.
Das, D., Banerjee, R., Batabyal, A., Barua, A. (1988). Influence of different deposition parameters on the properties of hydrogenated amorphous silicon films prepared by magnetron sputtering. Journal of Non-Crystalline Solids. 103(1), 143--148. North-Holland.
Das, D., Banerjee, R., Batabyal, A., Barua, A. (1988). Light-induced changes in magnetron-sputtered hydrogenated amorphous silicon films. Thin Solid Films. 164, 227--231. Elsevier.
Banerjee, R., Das, D. (1987). Properties of tin oxide films prepared by reactive electron beam evaporation. Thin Solid Films. 149(3), 291--301. Elsevier.
Banerjee, R., Ray, S., Barua, A. (1987). Thickness dependence of the properties of magnetron sputtered indium tin oxide films. Journal of Materials Science Letters. 6(10), 1203--1204. Springer Netherlands.
Banerjee, R., Ray, S., Barua, A. (1982). Properties of Tellurium Doped Vacuum Evaporated CdS Thin Films. Japanese Journal of Applied Physics. 21(1A), L43. IOP Publishing.
Singh, B., Banerjee, R., Arora, B. (1980). Thermoanalytical study of the solid state reaction between hydrated ZnO and Fe2O3. Journal of Thermal Analysis and Calorimetry. 18(1), 5--13. Akad\'emiai Kiad\'o, co-published with Springer Science+ Business Media BV, Formerly Kluwer Academic Publishers BV.
Banerjee, R., BARUA, A. (1979). SOME THEORETICAL CONSIDERATIONS ON THE HALL-EFFECT ANOMALY IN NICKEL-OXIDE. Other. 53(4), 468--470. INDIAN ASSOC CULTIVATION SCIENCE INDIAN J PHYSICS, JADAVPUR, KOLKATA 700 032, INDIA.
Arora, B., Banerjee, R., Prasad Rao, T., Mandai, N., Ganguli, N., Sen, S. (1965). Aglietti, EF, Scian, AN, Sacchi, JM, Porto Lopez, M., Pereira, E., Influence of grinding on the kinetics of transformation of gibbsite into a-Al2O3, Lat. am. j. chem. eng. appl. chem., vol. 16, pp. 33-43, 1986.. Journal of the American Ceramic Society. 49(8), 419--422.
Choudhuri, B., Banerjee, R., Sanyal, B. (1963). Removal of tarnish from gold saris and embroideries. Other. 8, 70--71.
Liu, X., Banerjee, R., Vitos, L., Wang, Y. (2022). Metastable high entropy alloys. Applied Physics Letters. 120(12), 120401. AIP Publishing LLC.
Gopagoni, S., Scharf, T. W., Banerjee, R., Tiley, J. S. (2013). Solid lubricating, hard and fracture resistant composites for surface engineering applications.
Rajagopalan, S., Hwang, J., Nag, S., Singh, A., Viswanathan, G., Tiley, J., Banerjee, R., Fraser, H. (2010). Atomic Scale Structure and Composition across/ Interfaces in Ni- Base Superalloys. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Viswanathan, G., Srinivasan, R., Tiley, J., Nag, S., Banerjee, R., Fraser, H. (2010). Characterization of Nanoscale Precipitates in Ni-base Superalloys. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Tiley, J., Banerjee, R. (2010). Determining the Impact of Cooling Rate and Aging Times on Nickel Base Super Alloys Using Callibrated XRD Intensity Ratioswhich Courses were Actually Held?. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Singh, A., Hwang, J., Nag, S., Rajagopalan, S., Tiley, J., Viswanathan, G., Fraser, H., Banerjee, R. (2010). Formation of Different Generations of Gamma Prime Precipitates in Rene 88 DT Nickel Base Superalloy. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Williams, R., Nag, S., Devaraj, A., Collins, P. C., Rajagopalan, S., Banerjee, R., Fraser, H. (2010). Heterogeneous Phase Nucleation and Growth in ss-Ti Alloys. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Devaraj, A., Williams, R., Nag, S., Rajagopalan, S., Srivilliputhur, S. G., Fraser, H., Banerjee, R. (2010). On the Precipitation of the Omega Phase in the Beta Matrix of Titanium Alloys. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Singh, A. K., Banerjee, R., Kacker, R. (1999). A Catalogue of Chromosome Numbers of Indian Mammals: Part 1. Orders: Carnivora and Chiroptera; Part 2. Orders: Cetacea, Insectivora, Lagomorpha, Pholidota, Primates, Proboscidea, Scandentia. Zoological Survey of India.
Bhattacharyya, T., Das, D., Banerjee, R., Barua, A. (1996). Study of the active layer in hydrogenated amorphous silicon solar cells using electrical and analytical techniques (vol 39, pg 99, 1995). Solar Energy Materials and Solar Cells. 40(2), U1--U2. ELSEVIER SCIENCE BV PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS.
Borkar, T. M. (2014). Processing and characterization of nickel-carbon base metal matrix composites. University of North Texas.
Behera, A. K. (2013). A study of mechanisms to engineer fine scale alpha phase precipitation in beta titanium alloy, Beta 21S. University of North Texas.
Dendge, N. B. (2013). Dynamic precipitation of second phase under deformed condition in Mg-Nd based alloy. University of North Texas.
Kami, P. (2013). Surface modifications to enhance the wear resistance and the osseo-integration properties of biomedical Ti-alloy. University of North Texas.
Nandwana, P. (2013). Titanium boride formation and its subsequent influence on morphology and crystallography of alpha precipitates in titanium alloys. University of North Texas.
Devaraj, A. (2011). Phase separation and second phase precipitation in beta titanium alloys. University of North Texas.
Banerjee, R. (2009). Morphological Changes in a Nickel/silica Catalyst During Preparation and Catalytic Activity for Partial Oxidation of Methane. Arizona State University.
Banerjee, R. (2007). Surface Engineering and Characterization of Laser Deposited Metallic Biomaterials. University of North Texas.
Banerjee, R. (2001). Absolute coverage measurements of ultrathin alkali-metal films on reconstructed silicon.
Banerjee, R. (1997). Structural and phase transformations in sputter deposited titanium-aluminum multilayered and alloy thin films. The Ohio State University.
Gorsse, S., Hutchinson, C., Goune, M., Banerjee, R. (2017). Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys. Science and Technology of Advanced Materials. 18(1), 584-610.
Banerjee, R., Needleman, A., Scharf, T. W., Wilson, A. K. (2015). Institute for Science and Engineering Simulation (ISES). University of North Texas Denton United States.
Tiley, J. S., Borkar, T., Sosa, J., Hwang, J. Y., Scharf, T. W., Fraser, H., Banerjee, R. (2014). Laser-Deposited In Situ TiC-Reinforced Nickel Matrix Composites: 3D Microstructure and Tribological Properties (Postprint). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Tiley, J. S., Borkar, T., Nag, S., Ren, Y., Banerjee, R. (2014). Reactive Spark Plasma Sintering (SPS) of Nitride Reinforced Titanium Alloy Composites (Postprint). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Tiley, J., Rojhirunsakool, T., Singh, A., Nag, S., Banerjee, R., Hwang, J. (2014). Temporal Evolution of Non-equilibrium Gamma’Precipitates in a Rapidly Quenched Nickel Base Superalloy (Preprint). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH STRUCTURAL MATERIALS DIV.
Tiley, J., Senkov, O., Viswanathan, G., Nag, S., Banerjee, R., Hwang, J. (2012). Determination of Gamma-Prime Site Occupancies in Nickel Superalloys Using Atom Probe Tomography and X-Ray Diffraction (Preprint). UNIVERSITY OF NORTH TEXAS DENTON.
Srivastava, A., Gopagoni, S., Needleman, A., Banerjee, R., Seetharaman, V., Staroselsky, A. (2012). Effect of Specimen Thickness on the Creep Response of a Ni-Based Single Crystal Superalloy (PREPRINT). UNIVERSITY OF NORTH TEXAS DENTON.
Tiley, J., Viswanathan, G., Nag, S., Banerjee, R., Singh, A., Chattopadhyay, S., Ren, Y., Fraser, H. (2012). Mechanisms of Precipitation of Different Generations of Gamma-Prime Precipitates During Continuous Cooling of a Nickel Base Superalloy (PREPRINT). UNIVERSITY OF NORTH TEXAS DENTON.
Tiley, J., Behera, A., Mahdak, K., Mohseni, H., Nag, S., Banerjee, R. (2012). Phase Transformations in the Oxygen-Enriched Case Layer of Beta Titanium Alloys Formed During Oxidation (Preprint). UNIVERSITY OF NORTH TEXAS DENTON.
Nag, S., Devaraj, A., Gupta, N., Srinivasan, S., Banerjee, R., Srinivasan, R., Williams, R., Fraser, H., Viswanathan, G., Tiley, J., others, (2011). A New Class of Solid-Solid Phase Transformations Involving a Composition-Dependent Displacive Component (Preprint). DTIC Document.
Banerjee, R., Singh, A., Nag, S., Viswanathan, G., Tiley, J., Fraser, H. (2011). Precipitation of Ordered Phases in Metallic Solid Solutions: A Synergistic Clustering and Ordering Process (Preprint). UNIVERSITY OF NORTH TEXAS DENTON.
Viswanathan, G., Tiley, J., Chaudhari, M., Singh, A., Gopal, P., Nag, S., Banerjee, R., Du, J. (2011). Site Occupancy of Chrome in the Gamma Prime Phase Ni3Al: An Integrated Computational and Experimental Study (Preprint). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Tiley, J., Viswanathan, G., Srinivasan, R., Fraser, H., Banerjee, R., Nag, S., Hwang, J. (2011). Use of Advanced Characterization Techniques to Study Structural and Compositional Transitions Across Solid State Interfaces (Preprint). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Tiley, J., Gopagoni, S., Singh, A., Hwang, J., Scharf, T., Banerjee, R. (2010). Microstructural Evolution in Laser Deposited Nickel-Titanium-Carbon in Situ Metal-Matrix Composites (Preprint). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Tiley, J., Singh, A., Mahdak, K., Gopagoni, S., Hwang, J., Nag, S., Banerjee, R. (2010). Probing Structure and Composition of Nickel/Titanium Carbide Hybrid Interfaces at the Atomic Scale (Preprint). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH METALS, CERAMICS AND NONDESTRUCTIVE EVALUATION DIVISION.
Tiley, J., Hwang, J., Singh, A., Banerjee, R., Choi, T. (2010). Processing and Thermal Conductivity of Carbon Nanotube-Reinforced Nickel Matrix Composites (Preprint). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Hwang, J., Nag, S., Srinivasan, R., Tiley, J., Viswanathan, G., Fraser, H., Banerjee, R. (2009). Elemental Partitioning Associated with Different Generations of Gamma Prime Precipitates in Rene 88DT Nickel Base Superalloy (Preprint). NORTH TEXAS STATE UNIV DENTON.
Scharf, T., Neira, A., Hwang, J., Tiley, J., Banerjee, R. (2009). Solid Lubrication of Laser Deposited Carbon Nanotube Reinforced Nickel Matrix Nanocomposites Preprint. NORTH TEXAS STATE UNIV DENTON.
Srinivasan, R., Banerjee, R., Hwang, J., Viswanathan, G., Tiley, J., Dimiduk, D., Fraser, H. (2008). Atomic Scale Structure and Chemical Composition Across Order-Disorder Interfaces (POSTPRINT). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Tiley, J., Viswanathan, G., Srinivasan, R., Banerjee, R., Dimiduk, D., Fraser, H. (2008). Coarsening Kinetics of gamma-prime Precipitates in the Commercial Nickel Base Superalloy Rene88DT (PREPRINT). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Srinivasan, R., Banerjee, R., Hwang, J., Viswanathan, G., Tiley, J., Fraser, H. (2008). Direct Atomic Scale Observation of the Structure and Chemistry of Order/Disorder Interfaces. AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Tiley, J., Hwang, J., Neira, A., Scharf, T., Banerjee, R. (2008). Laser-Deposited Carbon Nanotube Reinforced Nickel Matrix Composites (PREPRINT). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
Tiley, J., Hwang, J., Banerjee, R., Srinivasan, R., Viswanathan, G., Fraser, H. (2008). Nanoscale Characterization of Elemental Partitioning Between Gamma and Gamma Prime Phases in Rene 88DT Nickel Base Superalloy (Preprint). AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE.
