Dr. Cheng Yu Ph.D., P.E., F.SEI
University of North Texas
Mechanical Engineering
(940) 891-6891
Email:

Education

PhD, Johns Hopkins University, 2005.
Major: Civil/Structural Engineering
Dissertation Title: Distortional Buckling of Cold-formed Steel Members in Bending
MS, Johns Hopkins University, 2004.
Major: Civil/Structural Engineering
BS, Tsinghua University, 1998.
Major: Structure Engineering
Degree Specialization: Civil/Structural Engineering

Professional Positions

Professional
Professor, University of North Texas. (September 2016 – Present).
Associate Professor, University of North Texas. (September 2011 – August 2016).

Licensures and Certifications

Professional Engineer, Texas Board of Professional Engineers and Land Surveyors. (December 12, 2019 – Present).

Professional Memberships

Jim McNatt Logistics Institute for Logistics Research. (2015 – Present).

Member, Cold-Formed Steel Engineers Institute. (2014 – Present).

Principal Investigator, Cold-Formed Steel Research Consortium. (2014 – Present).

Senior Member, American Institute of Aeronautics and Astronautics. (2010 – Present).

Member, American Institute of Steel Construction. (2007 – Present).

Member, Committee on Framing Standards, American Iron and Steel Insitute. (2006 – Present).

Member, Structural Stability Research Council. (2006 – Present).

Member, Committee on Specification, American Iron and Steel Institute. (September 1, 2005 – Present).

Member, American Society of Civil Engineers. (2005 – Present).

President, America-China Steel Framing Association. (September 1, 2019 – January 1, 2025).

Development Activities Attended

Conference Attendance,"Building Knowledge Conference and ASC Region 5 2023 Fall Meeting," Associated Schools of Construction, Dallas, TX, United States of America. (October 12, 2023 – October 13, 2023).

Workshop,"2021 AISC Educator Workshop," AISC, Zoom, TX, United States of America. (August 5, 2021 – August 5, 2021).

Continuing Education Program,"Autodesk Digital Construction Summer School 202," Autodesk, United States of America. (August 3, 2021 – August 4, 2021).

Faculty Development Leave,"Visiting Faculty," Johns Hopkins University, Baltimore, MD, United States of America. (August 20, 2019 – December 15, 2019).

Workshop,"2016 UNT CLEAR CDI summer workshop," UNT CLEAR CDI, Denton, Tx, United States of America. (June 1, 2016 – July 1, 2016).

Teaching

Teaching Experience

University of North Texas
CNET 1160, Construction Methods and Materials, 4 courses.
CNET 2300, Construction Graphics and Modeling, 13 courses.
CNET 2900, Special Problems, 2 courses.
CNET 3430, Structural Analysis, 8 courses.
CNET 3460, Soils and Foundations, 2 courses.
CNET 4620, Advanced Design in Cold Formed Steel Structures, 31 courses.
CNET 4780, Senior Design I, 3 courses.
CNET 4790, Senior Design II, 1 course.
CNET 4900, Special Problems, 6 courses.
CNET 4920, Cooperative Education, 30 courses.
ENGR 2332, Mechanics of Materials, 4 courses.
MEEN 4800, Topics in Mechanical & Energy Engineering, 2 courses.
MEEN 5440, Finite Element Analysis, 1 course.
MEEN 5890, Directed Study in Mechanical & Energy Engineering, 3 courses.
MEEN 5940, Graduate Seminar in Mechanical and Energy Engineering, 1 course.
MEEN 5950, Masters Thesis, 3 courses.
MEET 5900, Special Problems, 2 courses.
MEET 5910, Special Problems, 1 course.
MSES 5230, Risk Management in Construction, 3 courses.
MSES 5900, Special Problems, 7 courses.
MSES 5910, Special Problems, 1 course.
MSES 5930, Research Problems in Lieu of Thesis, 2 courses.
MSES 5950, Master's Thesis, 11 courses.
MSET 5040, Analytical Methods for Engineering Technology, 1 course.
MSET 5220, Building Information Modeling, 7 courses.
MSET 5230, Risk Management in Construction, 10 courses.
MSET 5800, Studies in Engineering Technology, 7 courses.
MSET 5900, Special Problems, 14 courses.
MSET 5910, Special Problems, 3 courses.
MSET 5930, Research Problems in Lieu of Thesis, 4 courses.
MSET 5950, Master's Thesis, 23 courses.

Non-Credit Instruction

Uncompensated Instructional Overload, 4. (September 2018 – May 2019).

Directed Student Learning

Major Professor,"PhD Dissertation: Cold-Formed Steel Structures," Mechanical and Energy Engineering. (January 2024 – Present).

Supervised Research,"CFS Type II Shear Walls," Texas Academy of Mathematics and Science. (September 2023 – Present).

Supervised Research,"Developing 3D Cold-Formed Steel Trusses," Other - Outside UNT. (November 2023 – November 2024).

Major Professor,"MS Thesis: A Study for Deflection Calculation Methodology of Cold-Formed Steel Type-II Shear Wall," Mechanical and Energy Engineering. (January 2023 – August 2024).

Directed Individual/Independent Study,"3D Cold-Formed Steel Trusses," Mechanical and Energy Engineering. (January 2024 – May 2024).

Other,"Celina Ownsby I," Mechanical and Energy Engineering. (September 2023 – May 2024).

Supervised Research,"Verification S310 Method for CFS Corrugated Shear Walls," Mechanical and Energy Engineering. (September 2023 – May 2024).

Supervised Research,"Long Span Cold-Formed Steel Trusses," Mechanical and Energy Engineering. (January 2023 – May 2024).

Internship Advisor,"Cooperative Education (Credit)," Mechanical and Energy Engineering. (August 2023 – December 2023).

Supervised Research,"Cold-Formed Steel Truss and Composite Column," Mechanical and Energy Engineering. (January 2023 – December 2023).

Major Professor,"Master Thesis: Experimental and Numerical Investigation of a Novel Cold-Formed Steel Long Span Truss," Mechanical and Energy Engineering. (January 15, 2022 – December 15, 2023).

Dissertation Committee Member,"Fracture Behaviour of Cold-Formed Steel Bolted Connections," Other - Outside UNT. (November 2023).

Internship Advisor,"Cooperative Education (Credit)," Mechanical and Energy Engineering. (May 2023 – August 2023).

Supervised Research,"Developing Simplified Expression for Distortional Buckling of CFS Members," Other - Outside UNT. (January 2023 – May 2023).

Supervised Research,"Wind Load on CFS Wall Panels," Mechanical and Energy Engineering. (September 2021 – May 2023).

Directed Individual/Independent Study,"Simplified Expression for Elastic Distortional Buckling of Cold-Formed Steel Members," Mechanical and Energy Engineering. (August 2022 – December 2022).

Internship Advisor,"Cooperative Education (Credit)," Mechanical and Energy Engineering. (August 2022 – December 2022).

Supervised Research,"Cold-Formed Steel Joist, Connections, and Shear Walls," Mechanical and Energy Engineering. (September 2020 – December 2022).

Dissertation Committee Member,"Structural Behaviour of Power-Actuated Fasteners in Hybrid Steel Connections," Other - Outside UNT. (November 2022).

Directed Individual/Independent Study,"Building Construction Technology and Management," Mechanical and Energy Engineering. (August 2021 – December 2021).

Other,"TAMS Student Research Project," Texas Academy of Mathematics and Science. (January 2020 – December 2021).

Internship Advisor,"Cooperative Education (Credit)," Mechanical and Energy Engineering. (May 2021 – August 2021).

Dissertation Committee Member,"Carbon Capture Utilization for Bio-Based Building Insulation Foams," Mechanical and Energy Engineering. (May 2021).

Major Professor,"Project: Developing building information models of cold-formed steel sections," Mechanical and Energy Engineering. (May 2021).

Major Professor,"Thesis: Structural Analysis and Finite Element Modeling of Aluminum Honeycomb Sandwich Structures," Mechanical and Energy Engineering. (May 2021).

Other,"Kimball Office – Ground-up Office Building," Engineering Technology. (September 2020 – May 2021).

Other,"Undergraduate Research Project in Structural Testing Lab J120," Engineering Technology. (September 2020 – May 2021).

Dissertation Committee Member,"Tribo-Corrosion of High Entropy Alloys," Materials Science and Engineering. (December 2020).

Major Professor,"Thesis: Design Method for Cold-Formed Steel Shear Wall Sheathed with Polymer Composite Panel," Engineering Technology. (September 2018 – July 2020).

Major Professor,"Thesis: Modeling and Analysis of Prototype Shelter Structures on ABAQUS," Engineering Technology. (January 2018 – May 2020).

Major Professor,"Thesis: Structural, Thermal, and Corrosion Properties of a Cold-Formed Steel Rigid Wall Relocatable Shelter," Engineering Technology. (August 15, 2016 – May 15, 2020).

Major Professor,"Thesis: Design Method of Cold-Formed Steel Frame Shear Wall Sheathed by Structural Concrete Panel," Engineering Technology. (January 2018 – December 2019).

Major Professor,"Thesis: Construction Management Method and Techniques in Army Tactical Shelter," Engineering Technology. (August 15, 2017 – December 15, 2019).

Dissertation Committee Member,"Fracture Behaviors in Cold-Reduced High Strength Steel," Other - Outside UNT. (November 2019).

Other,"Undergraduate Research Project in Structural Testing Lab J120," Engineering Technology. (September 2018 – May 2019).

Major Professor,"Project: Analysis method for thermal performance of cold-formed steel buildings with different insulation technologies," Engineering Technology. (September 2017 – May 2019).

Major Professor,"Thesis: Cold-Formed Steel Member Connections Using BAC Fasteners," Engineering Technology. (August 20, 2017 – May 15, 2019).

Other,"TAMS Student Research Project," Texas Academy of Mathematics and Science. (January 2017 – May 2018).

Major Professor,"Thesis: The Design and Development of Lightweight Composite Mobile Facilities," Engineering Technology. (August 20, 2016 – May 15, 2018).

Major Professor,"Thesis: Shear Strength of Cold-Formed Steel Clip Angles Subjected to Different Screw Pattern," Engineering Technology. (January 15, 2016 – December 15, 2017).

Major Professor,"Thesis: SHEAR AND BENDING STRENGTH OF COLD-FORMED STEEL SOLID WALL PANELS USING CORRUGATED STEELSHEETS FOR MOBILE SHELTERS," Engineering Technology. (August 20, 2015 – December 15, 2017).

Major Professor,"Thesis: Structural Performance of Novel Cold-formed Steel framed Shear Walls sheathed with Corrugated Sheets," Engineering Technology. (August 20, 2015 – August 15, 2017).

Major Professor,"Thesis: A Study on the System Reliability of Cold-Formed Steel Roof Trusses," Engineering Technology. (August 20, 2015 – May 15, 2017).

Major Professor,"Thesis: Innovative Cold-Formed Steel Shear Walls with Corrugated Steel Sheathing," Engineering Technology. (August 20, 2014 – May 15, 2016).

Major Professor,"Project," Engineering Technology. (2013 – 2015).

Major Professor,"Thesis: Direct Strength Method for Webcrippling of Cold-Formed Steel Sections under One-Flange Loading," Engineering Technology. (August 20, 2013 – August 15, 2015).

Major Professor,"Project," Engineering Technology. (2012 – 2014).

Major Professor,"Project," Engineering Technology. (2012 – 2014).

Major Professor,"Thesis: Analytical Model for Lateral Deflection in Cold-Formed Steel Framed Shear Walls with Steel Sheathing," Engineering Technology. (January 15, 2013 – December 15, 2014).

Major Professor,"Thesis: Cold-Formed Steel Framed Shear Wall Sheathed with Corrugated Steel Sheet," Engineering Technology. (2011 – May 2013).

Major Professor,"Thesis: Analytical Model of Cold-Formed Steel Framed Shear Wall with Steel Sheet and Wood –Based Sheathing," Engineering Technology. (2011 – May 2013).

Major Professor,"Thesis: Direct Strength Method for Web Crippling of Cold-Formed Steel C Sections," Engineering Technology. (2011 – May 2013).

Major Professor,"Thesis "Cold-Formed Steel Shear Wall using OSB Sheathing"," Engineering Technology. (2010 – May 2012).

Major Professor,"Thesis "Bearing Strength of Cold-Formed Steel Bolted Connections without Nut"," Engineering Technology. (2010 – May 2012).

Major Professor,"Project "Cold-Formed Steel Members with Stiffened Perforations"," Engineering Technology. (2009 – 2011).

Major Professor,"Thesis "Cold-Formed Steel Bolted Connections using Oversized and Slotted Holes without Washers"," Engineering Technology. (2009 – August 2010).

Major Professor,"Thesis "Seismic Detailing for Cold-Formed Steel Shear Walls with Steel Sheathing"," Engineering Technology. (2008 – August 2010).

Major Professor,"Thesis "Cold-Formed Steel Bolted Connections without Washers on Oversize and Slotted Holes"," Engineering Technology. (2007 – May 2009).

Major Professor,"Thesis "Shear Wall Tests and Finite Element Analysis of Cold-Formed Steel Structural Members"," Engineering Technology. (2006 – December 2008).

Major Professor,"Project "Finite Element Analysis on Cold-Formed Steel Specially Braced Frame"," Engineering Technology. (2006 – 2008).

Research

Published Intellectual Contributions

Book
Yu, C. (2023). Recent Trends in Cold-Formed Steel Construction, 2nd Edition. (2nd), 538. Elsevier. https://shop.elsevier.com/books/recent-trends-in-cold-formed-steel-construction/yu/978-0-443-19055-1
Yu, C. (2016). Recent Trends in Cold-Formed Steel Construction. 1(1), 332. Cambridge: Woodhead Publishing. https://www.elsevier.com/books/recent-trends-in-cold-formed-steel-construction/yu/978-0-08-100160-8
Book Chapter
Zhang, W., Yu, C. (2023). AISI Design Procedures and Practical Examples for Cold-Formed Steel Structures. Recent Trends in Cold-Formed Steel Construction, 2nd Edition. (Chapter 3), . Elsevier. https://shop.elsevier.com/books/recent-trends-in-cold-formed-steel-construction/yu/978-0-443-19055-1
Chen, H., Hancock, G., Li, Y., Madhavan, M., Sevaraj, S., Yu, C. (2023). Recent Development of Building Codes and Design Standards for Cold-Formed Steel Structures. Recent Trends in Cold-Formed Steel Construction, 2nd Edition. (Chapter 2), . Elsevier. https://shop.elsevier.com/books/recent-trends-in-cold-formed-steel-construction/yu/978-0-443-19055-1
Rahman, N., Chen, H., Yu, C. (2020). Structural Engineering Handbook. Chapter 9, . McGraw-Hill. https://www.mhprofessional.com/9781260115987-usa-structural-engineering-handbook-fifth-edition-group
Conference Proceeding
Zhang, W., Lang, X., Mahdavian, M., Yu, C. (2023). Seismic Performance of Cold-Formed Steel Framed Shear Walls using In-Frame Corrugated Steel Sheathing. Charlotte, NC: Proceedings of 2023 Annual Stability Conference, Structural Stability Research Council.
Yu, C., Yelmagandla, H., Gondipalli, H. (2022). Behavior and Strength of Cold-Formed Steel Framed Shear Walls Sheathed by MgO Board. Proceedings of the 2022 CFSRC Colloquium. https://jscholarship.library.jhu.edu/handle/1774.2/67714
Liu, J., Liu, S., Zhao, J., Yu, C. (2022). Flexural Strength of Cold-Formed Steel Joist with Stiffened Web Holes. Proceedings of the 2022 CFSRC Colloquium. https://jscholarship.library.jhu.edu/handle/1774.2/67688
Yu, C., Tian, Y., Zhang, W. (2022). Cold-Formed Steel Corrugated Sheet Shear Wall with Special Energy Dissipation Bracing. Proceedings of 2022 Annual Stability Conference.
Xu, X., Zhang, W., Yu, C. (2021). High-Strength Cold-Formed Steel Framed Shear Wall with Sheet Steel Sheathing. Structural Stability Research Council.
Zhang, W., Yu, C., Mahdavian, M., Lan, X. (2020). Cold-Formed Steel Framed Shear Walls with In-Frame Corrugated Steel Sheathing. Proceedings of the 2020 CFSRC Colloquium. https://jscholarship.library.jhu.edu/handle/1774.2/63132
Yu, C., Tian, Y., Yan, Z. (2020). Shear Strength of Cold-Formed Steel Flexural Members Connected Using Clip Angles. Proceedings of 2020 SSRC Annual Stability Conference. https://www.aisc.org/education/continuingeducation/education-archives/shear-strength-of-cold-formed-steel-flexural-members-connected-using-clip-angles/
Yu, C., Yan, Z., Zhang, W. (2018). Strength of Cold-Formed Steel Clip Angle in Combined Bending and Shear Loading. St. Louis: Proceedings of the 24th International Specialty Conference on Cold-Formed Steel Structures.
Yu, C., Zhang, W., Yan, Z., Mahdavian, M. (2018). Tensile Strength and Serviceability of Cold-Formed Steel Clip Angles.. St. Louis: Proceedings of the 24th International Specialty Conference on Cold-Formed Steel Structures.
Artman, J., Yu, C. (2018). The Design and Development of Lightweight Composite Panels for Rigid Wall Shelters.. St. Louis: Proceedings of the 24th International Specialty Conference on Cold-Formed Steel Structures.
Zhdanov, D., Yu, C. (2018). Recent Trends in the Use of Cold-Formed Steel Profiles in the US Construction Industry. 137–143. Brest: Perspective Directions of Innovative Development of Construction Industry and Engineering Training.
Lan, X., Yu, C., Zhang, W., Mahdavian, M. (2018). Seismic Performance Evaluation of Cold-Formed Steel Framed Shear Walls using In-Frame Corrugated Steel Sheets. Baltimore, MD: Structural Stability Research Council.
Johnson, A., Smith, B., Moen, C., Yu, C. (2017). A Stud on the System Reliability of Cold-Formed Steel Roof Trusses. San Antonio, TX: Structural Stability Research Council.
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2017). Finite Element Analysis on Shear Strength of Cold-Formed Steel Shear Walls Using Corrugated Steel Sheathing. San Antonio, TX: Structural Stability Research Council.
Zhang, W., Wang, J., Mahdavian, M., Yu, C. (2016). Seismic performance of cold-formed steel framed buildings using corrugated sheet shear walls. Geotechnical and Structural Engineering Congress 2016. 252–263.
Bagheri, A., Kondapally, S., Bostanci, H., Foster, P. R., Yu, C. (2016). Simulation and Visualization of an Innovative Rotary Displacer Stirling Engine Operation. Proc. 2016 ASEE-GSW Annual Conference, Fort Worth, TX, March 6-8, 2016.
Yu, C., Johnson, A., Ramirez, R. (2016). Advancing BIM for Cold-Formed Steel Structures. Baltimore, MD:.
Jia, P., Zhang, W., Mahdavian, M., Derrick, N., Yu, C. (2016). Behavior of Steel Sheet Sheathed Cold-Formed Steel Walls Subjected to Combined Lateral and Vertical Loads. Baltimore, MD:.
Mahdavian, M., Zhang, W., Yu, C. (2016). Sheathing Overlapping and Attachment Methods for Cold-Formed Steel Shear Walls with Corrugated Steel Sheathing. Baltimore, MD:.
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2016). Simulating the Seismic Performance of Cold-Formed Steel Framed Buildings using Corrugated Sheet Shear Walls. Baltimore, MD:.
Yu, C., Yousof, M., Mahdavian, M., Zhang, W. (2016). Screw Connections in Cold-Formed Steel Clip Angles Subjected to Uplift Forces. Las Vegas, NV:.
Mahdavian, M., Zhang, W., Ding, C., Moen, C., Yu, C. (2016). Cyclic Simulation of Cold-Formed Steel Shear Walls with Corrugated Steel Sheathing. Orlando, FL: Structural Stability Research Council.
Yu, C., Zhang, W., Wang, J., Mahdavian, M. (2016). Seismic Performance of Cold-Formed Steel Framed Buildings using Corrugated Sheet Shear Walls. Phoenix, AZ: ASCE.
Yu, C., Yousof, M. (2015). Behavior and Design of Thin-Walled Cold-Formed Steel Clip Angles subjected to Compression Load. Lisbon:.
Yu, C., Vora, H., Li, C. (2015). High-Strength Cold-Formed Steel Framed Shear Walls Sheathed with Noncombustible Panels. Lisbon:.
Yu, C., Yu, G., Wang, J. (2015). Optimization of Cold-Formed Steel Framed Shear Wall Sheathed with Corrugated Steel Sheets: Experiments and Dynamic Analysis. Structures Congress 2015. 1008–1020.
Yu, C., Yousof, M., Mahdavian, M. (2015). Behavior and Design of Thin-Walled Cold-Formed Steel Clip Angles Subjected to Shear Load. Nashville, TN: Proceedings of Annual Stability Conference.
Yu, C., Li, C., Elliott, C. (2014). Behavior and Design of Cold-Formed, Steel-Framed Shear Walls using Structural Composite Panels. Structures Congress 2014. 2721–2733.
Schafer, B., Ayhan, D., Leng, J., Liu, P., Padilla-Llano, D., Peterman, K., Stehman, M., Buonopane, S., Eatherton, M., Madsen, R., others, (2014). The CFS-NEES effort: Advancing cold-formed steel earthquake engineering. Proceedings of the 10th National Conference in Earthquake Engineering.
Liu, P., Peterman, K., Yu, C., Schafer, B. (2012). Cold-formed steel shear walls in ledger-framed buildings. Annual Stability Conference, Structural Stability Research Council.
Zhao, Y., Yan, W. M., Yu, C. (2012). Simplified Method for Elastic Distortional Buckling Stress of Cold-Formed Thin-Wall Steel Members. Applied Mechanics and Materials. 166, 3391–3398.
Hedric, A., Yanagi, N., Huang, Z., Yu, C. (2011). A Pilot Research on Seismic Performance Factors for CFS Shear Walls with Steel Sheet Sheathing. Proceedings of Texas Section ASCE Spring 2011 Meeting.
Yu, C., Huang, Z., Vora, H. (2009). Cold-formed steel framed shear wall assemblies with corrugated sheet steel sheathing. Proceedings of the Annual Stability Conference, Structural Stability Research Council, Phoenix, AZ.
Yu, C., Schafer, B. (2003). Analysis and testing of cold-formed steel beams. Advances in Structures: Proceedings of the International Conference on Advances in Structures (ASSCCA’03), Sydney, Australia, 22-25 June 2003. 1, 387.
Engineering Design Guide
Yu, C. (2021). Cold-Formed Steel Clip Angle Design Guide, 2021 Edition. AISI D114, . Washington DC: American Iron and Steel Institute. https://shop.steel.org/products/cold-formed-steel-clip-angle-design-guide-2021-edition-electronic-version
Journal Article
Xie, Z., Wang, K., Wu, J., Zhou, D., Zhang, X., Yu, C. (2023). Research on Shear Behavior and Calculation Method of Bearing Capacity of CFS Shear Wall with SPR. Journal of Engineering Mechanics. DOI: 10.6052/j.issn.1000-4750.2023.04.0261
Zheng, W., Lang, X., Mahdavian, M., Yu, C. (2023). Seismic performance of cold-Formed steel framed shear walls using in-frame corrugated steel sheathing. Advances in Structural Engineering. 26(11), . Sage Journals. https://doi.org/10.1177/13694332231181538
Jiang, Z., Yan, T., Zhang, A., Yang, X., Yu, C., Li, R. (2023). Experimental study of plate-buckling type earthquake-resilient prefabricated steel beam-column joints with replaceable double flange cover plates. 50, 1100-1113. Elsevier. https://doi.org/10.1016/j.istruc.2023.02.063
Zhao, Q., Qiu, J., Li, Y., Yu, C. (2023). Lateral behavior and PFI model of sinusoidal corrugated steel plate shear walls. Journal of Constructional Steel Research. 203(107812), . Elsevier. https://doi.org/10.1016/j.jcsr.2023.107812.
Liu, X., Zhang, W., Yu, C., Li, Y., Jiang, Z., Yu, S. (2022). Experimental study on cold-formed steel shear walls with different corrugated steel sheathings. Journal of Constructional Steel Research. 199, . Elsevier. https://www.sciencedirect.com/science/article/abs/pii/S0143974X22005090?via%3Dihub
Zhao, J., Liu, J., Yu, C., Zhang, W. (2022). Test investigation and direct strength method on cold-formed steel compression members with web holes of different widths. Engineering Structures. 272, . Elsevier. https://doi.org/10.1016/j.engstruct.2022.114979
Zhao, Y., Yu, C., Zhang, W., Xie, Z., Yu, S., Du, X. (2022). Shake table tests of a corrugated steel sheathed cold-formed steel structure. 60, . Journal of Building Engineering. https://doi.org/10.1016/j.jobe.2022.105161
Qiu, J., Zhao, Q., Wang, Z., Yu, C. (2022). Lateral Behavior of Trapezoidally Corrugated Wall Plates in Steel Plate Shear Walls, Part 1: Elastic Buckling. Thin-Walled Structures. 174, . https://doi.org/10.1016/j.tws.2022.109104
Qiu, J., Zhao, Q., Yu, C., Wang, Z. (2022). Lateral Behavior of Trapezoidally Corrugated Wall Plates in Steel Plate Shear Walls, Part 2: Shear Strength and Post-Peak Behavior. Thin-Walled Structures. 174, . Elsevier. https://doi.org/10.1016/j.tws.2022.109103.
Zhang, W., Mahdavian, M., Lan, X., Yu, C. (2021). Cold-Formed Steel Framed Shear Walls with In-Frame Corrugated Steel Sheathing. Advances in Structural Engineering. 147(11), .
Yu, C., Tian, Y., Yan, W., Zhang, W. (2021). Novel Energy Dissipation Bracing Designed for Corrugated Sheet Sheathed Cold-Formed Steel Shear Wall. Journal of Structural Engineering. 147(11), .
Xie, Z., Zhang, W., Chen, T., Zhou, D., Shi, L., Yu, C. (2021). Comparative Analysis and Design Method of Shear Strength for Hybrid SPR-SDS Joints in Thin-Walled Steel Structures. Structures. 33, . Elsevier. https://doi.org/10.1016/j.istruc.2021.07.003
Zhao, Y., Yu, C., Chen, S., Jian, Z., Zhang, W. (2021). Shear Performance of Cold-Formed Steel Shear Walls with High-Aspect-Ratios. Structures. 33, . Elsevier. https://doi.org/10.1016/j.istruc.2021.05.011.
Liu, X., Meng, K., Zhang, A., Zhu, T., Yu, C. (2021). Bearing Capacity of H-Section Beam Wrapped with Ceramsite Concrete. Steel and Composite Structures. 40(5), 679-696.
Zhang, J., Li, X., Yu, C., Wang, C. (2021). Cyclic Behavior of High-Strength Concrete Shear Walls with High-Strength Reinforcements and Boundary CFST Columns. Journal of Constructional Steel Research. 182, . Elsevier. https://doi.org/10.1016/j.jcsr.2021.106692
Zhang, W., Xu, X., Liu, Y., Yu, C., Liu, X., Xie, Z. (2021). High-Strength Cold-Formed Steel Framed Shear Wall with Steel Sheet Sheathing. Thin-Walled Structures. 162, . Elseviwe. https://doi.org/10.1016/j.tws.2021.107584
Xie, Z., Zhang, W., Yan, W., Zhang, Y., Mu, T., Yu, C. (2021). Study on Shear Performance and Calculation Method for Self-pierce Riveted Joints in Galvanized Steel Sheet. Thin-Walled Structures. 161, . Elsevier. https://doi.org/10.1016/j.tws.2021.107490
Zhan, X., Liu, X., Feng, S., Yu, C. (2021). Seismic Performance of a Square HSS Column to H-section Beam Bolted Connection with Double Cover Plate. Engineering Structures. 131, . Elsevier. https://doi.org/10.1016/j.engstruct.2020.111729.
Liu, X., Chen, G., Xu, L., Yu, C., Jiang, Z. (2021). Seismic Performance of Blind-Bolted Joints for Square Steel Tube Columns under Bending-Shear. Journal of Constructional Steel Research. 176, . Elsevier. https://doi.org/10.1016/j.jcsr.2020.106395.
Zhang, A., Liu, X., Wang, Y., Yu, C., Bai, Z., Ha, T. (2021). Static performance of slidable bolt-assembly truss-to-column connection with oversized bolt holes. Journal of Constructional Steel Research. 176, . Elsevier. https://doi.org/10.1016/j.jcsr.2020.106374.
Wang, Y., Cui, X., Liu, X., Yu, C., Bai, Z. (2020). Seismic Performance of Bolted Beam-To-Column Connection with Rib-Stiffened Splicing Plate. Journal of Constructional Steel Research. 174, . Elsevier. https://www.sciencedirect.com/science/article/abs/pii/S0143974X2030852X
Liu, X., Feng, S., Shang, Z., Yu, C., Bai, Z. (2020). Performance of prestressed T-type self-centering energy-dissipation brace. Engineering Structures. 223, . Elsevier. https://doi.org/10.1016/j.engstruct.2020.111174
Xie, Z., Zhang, A., Zhang, Y., Yu, C., Mu, T. (2020). Research on Shear Behavior and Calculation Method for the Screw-Rivet Hybrid Connection in Cold-Formed Thin-Walled Steel. 41(10), . Journal of Building Structures.
Zhang, J., Li, X., Cao, W., Yu, C. (2020). Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements. Engineering Structures. 220, . Elsevier. https://www.sciencedirect.com/science/article/abs/pii/S0141029620316503
Zhao, Q., Qiu, J., Zhao, Y., Yu, C., Liu, Z. (2020). Estimating Fundamental Period of Corrugated Steel Plate Shear Walls. Civil Engineering Journal. 24, 3023-3033. KSCE Journal of Civil Engineering. https://doi.org/10.1007/s12205-020-2305-2
Liu, X., Zhang, A., Wang, Y., Shang, Z., Yu, C., Bai, Z. (2020). Seismic behavior of an X-deployed cable-braced bolt-assembly steel frame. Journal of Constructional Steel Research. 170, . Elsevier. https://doi.org/10.1016/j.jcsr.2020.106132
Xie,, Zhang, A., Yan, W., Zhang, Y., Yu, C., Mu, T. (2020). The Shear Behavior and Calculation Method of Self-Piercing Riveted Connections on Thin-Waled Steel Sheets. Journal of Engineering Mechanics. 37(6), .
Zhang, X., Xie, Z., Song, L., Yan, W., Yu, C. (2020). Feasibility Research on the Application of Self-Piercing-Riveted Connection in Cold-formed Steel Structures. Journal of Constructional Steel Research. 168, . https://www.sciencedirect.com/science/article/abs/pii/S0143974X19311861?dgcid=rss_sd_all
Liu, X., Cui, F., Zhang, X., Yu, C., Jiang, Z. (2019). Seismic Performance of Bolted Connection of H-Beam to HSS-Column with Web End-Plate. Journal of Constructional Steel Research. 156(2019), 167-181. Elsevier.
Song, L., Yu, C., Tang, Q., Yang, W., Xie, Z. (2019). Flexural Behavior Investigation of the CFS Truss Beams with Self-Piercing Riveted Connection. Journal of Constructional Steel Research. 156, 28-45. Elsevier.
Zhao, J., Yu, C., Sun, K. (2019). Tests and Direct Strength Design on Cold-Formed Steel Channel Beams with Web Holes. Engineering Structures. 184, 434-446. https://www.sciencedirect.com/science/article/abs/pii/S0141029618324945
Zhao, J., Yu, C. (2019). Experimental Study and Numerical Simulation of G550 High Strength Cold-Formed Steel Z-Section Members under Pure Bending and Moment Gradient. 19(2), 366-380. Springer. https://doi.org/10.1007/s13296-018-0118-7. PP1-15.
Yu, C. (2019). Seismic Performance of Cold-Formed Steel Shear Wall using Corrugated Sheathing with Slits. Journal of Structural Engineering. 145(4), . ASCE.
Yan, W., Mu, T., Xie, Z., Yu, C. (2019). Experimental Investigation of Typical Connections for Fabricated Cold-Formed Steel Structures. Advances in Structural Engineering. 22(1), 141–155.
Xu, L., Zhang, S., Yu, C. (2018). Determination of Equivalent Rigidities of Cold-Formed Steel Floor Systems for Vibration Analysis, Part II: Evaluation of the Fundamental Frequency. Thin-Walled Structures. 131, 1-15. Elsevier.
Zhang, W., Mahdavian, M., Yu, C. (2018). Different Slit Configuration in Corrugated Sheathing of Cold-Formed Steel Shear Wall. Journal of Constructional Steel Research. 150(2018), 430-441. Elsevier.
Xie, Z., Yan, W., Yu, C., Mu, T., Song, L. (2018). Experimental Investigation of Cold-Formed Steel Shear Walls with Self-Piercing Riveted Connections. Thin-Walled Structures. 131, 1-15. Elsevier.
Xie, Z., Yan, W., Yu, C., Mu, T., Song, L. (2018). Improved Shear Strength Design of Cold-Formed Steel Connection with Single Self-Piercing Rivet. Thin-Walled Structures. 131, 708-717. Elsevier.
Xie, Z., Yan, W., Yu, C., Mu, T., Song, L. (2018). Tensile Capacity of Self-Piercing Rivet Connections in Thin-Walled Steel Structures. Journal of Constructional Steel Research. 144, 211-220. Elsevier.
Zhang, W., Mahdavian, M., Yousof, M., Yu, C. (2018). Testing and Design of Cold-Formed Steel Clip Angles in Tension: Pull-Over and Serviceability. Thin-Walled Structures. 124, 13-19. Elsevier.
Zhang, W., Mahdavian, M., Yu, C. (2018). Lateral Strength and Deflection of Cold-Formed Steel Shear Wall using Corrugated Sheathing. Journal of Constructional Steel Research. 148, 399-408. https://www.sciencedirect.com/science/article/pii/S0143974X17308520
Yu, C., Zhang, W., Yu, G., Wang, J. (2018). Cold-Formed Steel Framed Shear Wall using Corrugated Steel Sheathing with Slits. Journal of Structural Engineering. 144(8), . ASCE.
Qiu, J., Zhao, Q., Yu, C., Li, Z. (2018). Experimental Studies on Cyclic Behavior of Corrugated Steel Plate Shear Walls. Journal of Structural Engineering. 144(11), . ASCE. https://ascelibrary.org/doi/10.1061/%28ASCE%29ST.1943-541X.0002165
Zhang, J., Zheng, W., Yu, C., Cao, W. (2018). Shaking Table Test of RC Coupled Shear Walls with Single Layer of Web Reinforcement and Inclined Steel Bars. Advances in Structural Engineering. 21(15), 2282-2298. https://journals.sagepub.com/doi/abs/10.1177/1369433218772350
Yu, C., Vora, H. (2017). A pilot study on cold-formed steel framed shear wall assemblies with corrugated sheathing. Other. 8(3), 272–288. Inderscience Publishers (IEL).
Yu, C., Yousof, M., Mahdavian, M., Zhang, W. (2017). Design of Cold-Formed Steel Clip Angles in Compression. Journal of Structural Engineering. 143(6), .
Yan, W., Xie, Z., Yu, C., Song, L., He, H. (2017). Experimental investigation and design method for the shear strength of self-piercing rivet connections in thin-walled steel structures. Journal of Constructional Steel Research. 133, 231–240. Elsevier.
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2017). Experiments and Simulations of Cold-Formed Steel Wall Assemblies Using Corrugated Steel Sheathing Subjected to Shear and Gravity Loads. Journal of Structural Engineering. 143(3), .
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2017). Seismic Performance Evaluation of Cold-Formed Steel Shear Walls Using Corrugated Steel Sheathing. Journal of Structural Engineering. 143(11), 04017151. American Society of Civil Engineers.
Zhang, W., Mahdavian, M., Yu, C. (2017). Recent Development on Seismic Performance of Cold-Formed Steel Framed Shear Walls with Corrugated Steel Sheathing. 19(6), .
Xie, Z., Song, L., Yan, W., He, H., (2017). Experimental Investigation on Self-Piercing Rivet Connections in Thin-Walled Steel Structures. Journal of Consumer Behaviour. 133, 231-240. Elsevier.
Lu, X., Gu, D., Yang, Q., (2017). Experimental Study and Finite Element Analysis of Energy Dissipating Outrigger. Advances in Structural Engineering. 20(8), 1196-1209.
Johnson, A., Ramirez, R., Yu, C. (2016). Advancing BIM for Cold-Formed Steel Structures. Missouri University of Science and Technology.
Yu, C., Yousof, M., Mahdavian, M., Zhang, W. (2016). Behavior and design of thin-walled cold-formed steel clip angles subjected to shear load. Journal of Structural Engineering. 142(7), 04016040. American Society of Civil Engineers.
Jia, P., Zhang, W., Mahdavian, M., Derrick, N., Yu, C. (2016). Behavior of Steel Sheet Sheathed Cold-Formed Steel Walls Subjected to Combined Lateral and Vertical Loads. Missouri University of Science and Technology.
Yu, C., Yu, G. (2016). Experimental Investigation of Cold-Formed Steel Framed Shear Wall Using Corrugated Steel Sheathing with Circular Holes. Journal of Structural Engineering. 142(12), .
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2016). Experiments and Simulations of Cold-Formed Steel Wall Assemblies Using Corrugated Steel Sheathing Subjected to Shear and Gravity Loads. Journal of Structural Engineering. 143(3), 04016193. American Society of Civil Engineers.
Schafer, B., Ayhan, D., Leng, J., Liu, P., Padilla-Llano, D., Peterman, K., Stehman, M., Buonopane, S., Eatherton, M., Madsen, R., others, (2016). Seismic response and engineering of cold-formed steel framed buildings. Structures. 8, 197–212. Elsevier.
Mahdavian, M., Zhang, W., Yu, C. (2016). Sheathing Overlapping and Attachment Methods for Cold-Formed Steel Shear Walls with Corrugated Steel Sheathing. Missouri University of Science and Technology.
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2016). Simulating the Seismic Performance of Cold-Formed Steel Framed Buildings using Corrugated Sheet Shear Walls. Missouri University of Science and Technology.
Dara, M. (2016). Direct Strength Method for Web Crippling of Cold-Formed Steel C- and Z- Sections Subjected to One-Flange Loading. 105(1), . OMICS International.
Yu, C., Li, C. (2015). Behavior and Strength of Cold-Formed Steel Shear Walls using Composite Panels. Advances in Structural Engineering. 18(7), 1063–1070. Multi-Science Publishing Co. Ltd.
Yu, C., Li, C. (2015). Behavior and Strength of Cold-Formed Steel Shear Walls using Composite Panels. Advances in Structural Engineering. 18(5), 1063-1070.
Tian, H., Li, Y., Yu, C. (2015). Testing of steel sheathed cold-formed steel trussed shear walls. Thin-Walled Structures. 94, 280–292. Elsevier.
Balh, N., DaBreo, J., Ong-Tone, C., El-Saloussy, K., Yu, C., Rogers, C. (2014). Design of steel sheathed cold-formed steel framed shear walls. Thin-Walled Structures. 75, 76–86. Elsevier.
Yu, C. (2014). Design of steel sheathed cold-formed steel framed shear walls.
Yu, C. (2014). Determining Elastic and Shear Moduli of cold-Formed Steel at Elevated Temperatures Using a New Sonic Resonance Method.
De León, D., Reyes, A., Yu, C. (2014). Evaluación probabilista de la seguridad estructural de un tipo de conexiones atornilladas y soldadas para zonas sísmicas. Other. 37(2), 97–106. Universidad del Zulia-Facultad de Ingenieria.
Yu, C., Yu, G., Wang, J. (2014). Innovative cold-formed steel framed shear wall sheathed with corrugated steel sheets: experiments and dynamic analysis. Missouri University of Science and Technology.
Yu, C. (2014). Shaking Table Test of Reinforced Concrete Wall Structure with Concealed Bracings.
Yu, C., Panyanouvong, M. X. (2013). Bearing strength of cold-formed steel bolted connections with a gap. Thin-Walled Structures. 67, 110–115. Elsevier.
Yu, C. (2013). Bearing Strength of Cold-Formed Steel Bolted Connections with a Gaps.
Yanagi, N., Yu, C. (2013). Effective strip method for the design of cold-formed steel framed shear wall with steel sheet sheathing. Journal of Structural Engineering. 140(4), 04013101. American Society of Civil Engineers.
Yu, C. (2013). Effective Strip Model for Cold-Formed Steel Shear Wall using Steel Sheet Sheathing.
De León, D., Reyes, A., Yu, C. (2013). Probabilistic assessment of connections for steel buildings on seismic zones. Journal of Constructional Steel Research. 88, 15–20. Elsevier.
Yu, C. (2013). Probabilistic Assessment of the Structural Safety of Bolted And Welded Connection for Seismic Zones.
Yanagi, N., Yu, C. (2012). Analytical model for cold-formed steel framed shear wall with steel sheet sheathing. Missouri University of Science and Technology.
Yu, C. (2012). Analytical Model for Cold-Formed Steel Framed Shear Wall with Steel Sheet Sheathing.
Yu, C., Li, C. (2012). Behavior and Strength of Cold-formed Steel Framed Shear Walls Sheather with Composite Panels. Missouri University of Science and Technology.
Liu, P., Peterman, K., Yu, C., Schafer, B. (2012). Characterizaiton of Cold-formed Steel Shear Wall Behavior under Cyclic Loading for the CFS-NEES Building. Missouri University of Science and Technology.
Yu, C. (2012). Cold-formed steel flexural member with edge stiffened holes: Behavior, optimization, and design. Journal of Constructional Steel Research. 71, 210–218. Elsevier.
Yu, C. (2012). Cold-Formed Steel Flexural Member with Edge Stiffened Holes: Behavior, Optimization, and Design.
Yu, C. (2012). Cold-formed steel shear walls in ledger-framed buildings.
Yu, C. (2012). Experimental Investigation of Cold-Formed Steel Shear Walls Sheathed with Steel-Gypsum Composite Panels.
Zhao, Y., Yan, W., Yu, C., (2012). Experimental Study of Cold-Formed Steel Framed Shear Wall Assemblies with Tapping Corrugated Sheet Steel Sheathing. Earthquake Resistant Engineering and Retrofitting. (6), 87–92. 工程抗震与加固改造编辑部.
Yu, C. (2012). Experimental Study of Cold-Formed Steel Framed Shear Wall Assemblies with Tapping Corrugated Sheet Steel Sheathing.
Yu, C. (2012). Selection of delivery system, contract type, and incentive/disincentive strategy for highway construction projects in the United States.
Yu, C., Xu, K. (2012). Shear strength of a cold-formed steel sheet in bolted connections using oversized holes. Journal of Structural Engineering. 139(5), 860–864. American Society of Civil Engineers.
Yu, C. (2012). Shear Strength of Cold-Formed Steel Sheet in Bolted Connections Using Oversized Holes.
Law, K., Zhao, Y., Yan, W., Yu, C. (2012). Simplified Method for Critical Elastic Distortional Buckling of Cold-Formed Steel C and Z Sections. Advances in Structural Engineering. 15(12), 2013–2019. SAGE Publications Sage UK: London, England.
Yu, C. (2012). Simplified Method for Critical Elastic Distortional Buckling of Cold-Formed Steel C and Z Sections.
Yu, C., Moen, C. (2012). The 1st Student Competition on Cold-formed Steel Design. Missouri University of Science and Technology.
Yu, C. (2012). The 1st Student Competition on Cold-Formed Steel Design.
Yu, C. (2011). Bearing Strength of Cold-Formed Steel Bolted Connections Using Oversized Holes without Washers.
Yu, C., Chen, Y. (2011). Detailing recommendations for 1.83 m wide cold-formed steel shear walls with steel sheathing. Journal of Constructional Steel Research. 67(1), 93–101. Elsevier.
Yu, C. (2011). Detailing Recommendations for 1.83-m Wide Cold-Formed Steel Shear Walls with Steel Sheathing.
Yu, C. (2011). Determining Distortional Buckling Strength of Cold-Formed Steel Flexural C and Z Sections Using Effective Width Method Thin-Walled Structures.
Yu, C., Yan, W. (2011). Effective Width Method for determining distortional buckling strength of cold-formed steel flexural C and Z sections. Thin-Walled Structures. 49(2), 233–238. Elsevier.
Yu, C. (2011). Simplified Methods for Determining The Critical Elastic Buckling Load of Thin-Walled Cold-Formed Steel Sections.
Yu, C. (2010). Appropriate Adjustment Method for Experimental Results of Cold-Formed Steel Shear Walls Sheathed with Steel Sheets.
Yu, C., Xu, K., Sheerah, I. (2010). Bearing strength of cold-formed steel bolted connections using oversized holes without washers. Journal of Structural Engineering. 137(1), 156–159. American Society of Civil Engineers.
Yu, C. (2010). Distortional buckling of cold-formed steel shear wall studs under uplift force. Journal of Structural Engineering. 136(3), 317–323. American Society of Civil Engineers.
Yu, C. (2010). Distortional Buckling Of Cold-Formed Steel Shear Wall Studs Under Uplift Force.
Ix, I. (2010). Elastic Buckling of Thin-Walled Structural Components with Edge-Stiffened Holes.
Yu, C. (2010). Elastic Buckling of Thin-Walled Structural Components with Edge-Stiffened Holes.
Yu, C., Chen, Y. (2010). Experimental investigation on 6 feet wide cold-formed steel framed shear walls with steel sheet sheathing. Missouri University of Science and Technology.
Yu, C. (2010). Experimental Investigation on 6 Feet Wide Cold-Formed Steel Framed Shear Walls with Steel Sheet Sheathing.
Yu, C. (2010). Shear resistance of cold-formed steel framed shear walls with 0.686 mm, 0.762 mm, and 0.838 mm steel sheet sheathing. Engineering Structures. 32(6), 1522–1529. Elsevier.
Yu, C. (2010). Shear Resistance of Cold-Formed Steel Framed Shear Walls with 0.686-mm, 0.762-mm, and 0.838-mm Steel Sheet Sheathing.
Yu, C. (2009). Distortional Buckling of Cold-Formed Steel Shear Wall Studs under Uplift Force. Journal of Structural Engineering. 1(1), 73. ASCE.
Yu, C., Chen, Y. (2009). Steel sheet sheathing options for cold-formed steel framed shear wall assemblies providing shear resistance-phase 2. American Iron and Steel Institute.
Yu, C., Sheerah, I. (2008). Cold-formed steel bolted connections without washers on oversized holes shear and bearing failures in sheets. Missouri University of Science and Technology.
Vora, H., Yu, C. (2008). Pilot research on cold-formed steel framed shear wall assemblies with corrugated sheet steel sheathing. Missouri University of Science and Technology.
Yu, C. (2008). Shear resistance of cold-formed steel framed shear wall assemblies. Missouri University of Science and Technology.
Yu, C. (2007). Effect of Longitudinal Stress Gradient on the Elastic Buckling of Thin Plates.
Yu, C., Schafer, B. W. (2007). Effect of longitudinal stress gradients on elastic buckling of thin plates. Journal of Engineering Mechanics. 133(4), 452–463. American Society of Civil Engineers.
Yu, C., Schafer, B. W. (2007). Simulation of cold-formed steel beams in local and distortional buckling with applications to the direct strength method. Journal of Constructional Steel Research. 63(5), 581–590. Elsevier.
Yu, C. (2007). Simulation of Cold-Formed Steel Beams in Local and Distortional Buckling with Applications to the Direct Strength Method.
Yu, C., Vora, H., Dainard, T., Veetvkuri, P. (2007). Steel sheet sheathing options for CFS framed shear wall aseemblies providing shear resistance. Unknown.
Yu, C., Schafer, B. W. (2006). Distortional buckling tests on cold-formed steel beams. Journal of Structural Engineering. 132(4), 515–528. American Society of Civil Engineers.
Yu, C. (2006). Distortional Buckling Tests on Cold-Formed Steel Beams.
Yu, C., Schafer, B. W. (2006). Effect of longitudinal stress gradient on the ultimate strength of thin plates. Thin-Walled Structures. 44(7), 787–799. Elsevier.
Yu, C. (2006). Effect of Longitudinal Stress Gradient on the Ultimate Strength of Thin Plates.
Yu, C., Lokie, T. (2006). Effective width method based design for distortional buckling. University of Missouri–Rolla.
Yu, C., Schafer, B. W. (2006). Finite element modeling of cold-formed steel beams validation and application. University of Missouri–Rolla.
Yu, C., Schafer, B. W. (2006). Stress gradient effect on the buckling of thin plates. University of Missouri–Rolla.
Yu, C., Schafer, B. W. (2005). Distortional buckling of cold-formed steel members in bending. American Iron and Steel Institute.
Yu, C., Schafer, B. W. (2003). Local buckling tests on cold-formed steel beams. Journal of Structural Engineering. 129(12), 1596–1606. American Society of Civil Engineers.
Yu, C. (2003). Local Buckling Tests on Cold-Formed Steel Beams", ASCE, Journal of Structural Engineering.
Research Report
Yeganeh, B., Yu, C. (2020). Investigation of Bolted Connections in Cold-Formed Steel Members using SAE J429 Bolts. (20-8), . American Iron and Steel Institute. https://buildusingsteel.org/wp-content/uploads/2020/12/CFSD-Report-RP20-8.pdf
Yu, C. (2018). Load Bearing Clip Angle Design – Phase II. (RP18-4), . Washington DC: American Iron and Steel Institute.
Technical Report
Yu, C., Yousof, M., Mahavian, M. (2015). Load bearing clip angle design. American Iron and Steel Insitute.
Schafer, B. W., Yu, C. (2002). Test verification of the effect of stress gradient on webs of cee and zee sections. American Iron and Steel Institute.

Presentations Given

Invited Talk

Yu, C. (Author & Presenter), School of Civil Engineering, Tianjin University, Development of Special Energy Dissipation Bracing for Corrugated Sheet Cold-Formed Steel Shear Wall, China. (2022).

Yu, C. (Presenter), College of Civil Engineering, Cold-Formed Steel Structures: Fundamental Design Method and Recent Research on High-Performance Shear Wall System, Tongji University, Shanghai, China, China. (2018 – 2018).

Yu, C. (Author & Presenter), The 4th International Summit of Light Frame Steel Prefabricated Building Technology and Application – The New Era of Customized Housing LFS 2.0, Seismic Design Method of Cold-Formed Steel Shear Wall Systems in North America., Xiamen, China, United States of America. (2018 – 2018).

Yu, C. (Author & Presenter), Cold-Formed Steel Structures: Basic Design Method and Recent Research on High-Performance Shear Wall System., College of Civil Engineering, HuaQiao University, Xiamen, China, China. (2018 – 2018).

Yu, C. (Author & Presenter), 1st National Cold-Formed Steel Conference, Recent Development on Seismic Performance of Cold-Formed Steel Framed Shear Walls with Corrugated Steel Sheathing, Tongji University, Shanghai, China, China. (2017 – 2017).

Yu, C. (Presenter), Invited Guest Presentation, Cold-Formed Steel Structures: Basic Design Methods and Recent Research on High-Performance Shear Wall System, Northeast Forestry University, Harbin, China, China. (2017 – 2017).

Yu, C. (Presenter), Invited Guest Presentation, International Cold-Formed Steel Competition on Cold-Formed Steel Design, South China University of Technology, Guangzhou, China, China. (2015 – 2015).

Keynote/Plenary Address

Yu, C. (Author & Presenter), 3rd National Cold-Formed Steel Conference, Development of Special Energy Dissipation Bracing for Corrugated Sheet Cold-Formed Steel Shear Wall, China. (2022).

Yu, C. (Panelist), 2017 CFSEI EXPO and Annual Meeting, Building Information Modeling, CFSEI, Fort Worth, Texas, United States of America. (2017 – 2017).

Mahdavian, M. (Author & Presenter), Lan, X. (Author), Zhang, W. (Author), Yu, C. (Author), 2017 CFSEI EXPO and Annual Meeting, Cold-Formed Steel Framed Shear Walls using Corrugated Steel Sheathing, CFSEI, Fort Worth, Texas, United States of America. (2017 – 2017).

Oral Presentation

Artman, J. (Author & Presenter), Martinez, N. (Author & Presenter), Derrick, N. (Author), Yu, C. (Author), Mukherjee, S. (Author), 2017 CFSEI EXPO and Annual Meeting, Light Weight Composite Structures for Advanced Tactical Shelters, CFSEI, Fort Worth, Texas, United States of America. (2017 – 2017).

Paper

Yu, C. (Author & Presenter), the 24th International Specialty Conference on Cold-Formed Steel Structures, Strength of Cold-Formed Steel Clip Angle in Combined Bending and Shear Loading, St. Louis, China. (2018 – 2018).

Yu, C. (Author & Presenter), the 24th International Specialty Conference on Cold-Formed Steel Structures, Tensile Strength and Serviceability of Cold-Formed Steel Clip Angles, CCFSS, St. Louis, United States of America. (2018 – 2018).

Yu, C. (Author & Presenter), the 24th International Specialty Conference on Cold-Formed Steel Structures, The Design and Development of Lightweight Composite Panels for Rigid Wall Shelters, CCFSS, St. Louis, United States of America. (2018 – 2018).

Uncategorized

Ener, L., Yousef, D., Yu, C., Texas Counseling Association Professional Growth Conference 2012, Taking Laughter Seriously: Therapeutic Aspects of Humor on Healing, Texas Counseling Association, Galveston, TX. (2012 – 2012).

Ener, L., Yousef, D., Yu, C., Texas Counseling Association Professional Growth Conference 2012, Ties that Bind: Integrating Play in the Family Setting, Texas Counseling Association, Galveston, TX. (2012 – 2012).

Media Contributions

TV
"Firms Reassure McKinney ISD After Cracks Found In $70 Million Football Stadium," CBS. (June 1, 2018).

Contracts, Grants and Sponsored Research

Contract
Yu, C., "Testing of Cold-Formed Steel Framed Shear Walls Sheathed by Different Panel Materials," Sponsored by Ectek International Inc., International, $7500 Funded. (April 1, 2019 – June 30, 2019).
Yu, C. (Principal), "Testing of Cold-Formed Steel Member Connections Using BAC Fasteners," Sponsored by Baltimore Aircoil Company, Private, $5000 Funded. (January 2019 – March 2019).
Yu, C. (Principal), "Testing of CF-Steel Roof and Floor Trusses," Sponsored by CFS Steel LLC, Private, $5000 Funded. (October 2018 – December 2018).
Yu, C. (Principal), "Behavior and Strength of USG Structural Panel in Axial Compression," Sponsored by United State Gypsum Company, Private, $6000 Funded. (March 2018 – June 2018).
Yu, C. (Principal), "Testing of Cold-Formed Steel Member Connections Using BAC Fasteners," Sponsored by Baltimore Aircoil Company, Private, $30000 Funded. (December 1, 2017 – June 30, 2018).
Yu, C. (Principal), "Testing of CF-Steel Trusses," Sponsored by CFS Steel LLC, Private, $5000 Funded. (April 2018 – May 2018).
Yu, C. (Principal), "Experimental Study on the Behavior and Strength of Lifting Lugs," Sponsored by Baltimore Aircoil Company, Private, $7000 Funded. (March 2018 – May 2018).
Yu, C. (Principal), "Testing of Cold-Formed Steel Framed Shear Walls Sheathed by USG Structural Panel Concrete Subfloor," Sponsored by United State Gypsum Company, Private, $25000 Funded. (January 2018 – May 2018).
Yu, C., "Structural Performance of Cold-Formed Steel Framed ROK-ON Walls," Sponsored by MagBoard, LLC, Private, $25000 Funded. (May 1, 2016 – December 31, 2017).
Fellowship
Yu, C., "Major Improvement of LOD Specification for CFS Framing Construction," Sponsored by American Iron and Steel Institute, Private, $6000 Funded. (June 1, 2017 – March 1, 2018).
Grant - Research
Yu, C., "GP00092: Experimental Investigation and Design Method of Cold-Formed Steel Joists with Edge-Stiffened Web Openings," Sponsored by American Iron and Steel Institute, National, $10000 Funded. (April 1, 2021 – May 30, 2022).
Dahotre, N. B. (Principal), Mukherjee, S. (Co-Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Title Removed - Export Controlled," Sponsored by KRI at Northeastern, Federal, $110867 Funded. (March 30, 2019 – March 29, 2020).
Yu, C. (Principal), "Expanding Effective Strip Method to Thicker Stud Walls," Sponsored by American Iron and Steel Institute, Private, $6000 Funded. (June 1, 2019 – January 31, 2020).
Yu, C. (Principal), "Shear Strength of Cold-Formed Steel Clip Angles with Multiple Lines of Screws," Sponsored by American Iron and Steel Institute, Private, $6000 Funded. (June 1, 2019 – January 31, 2020).
Mukherjee, S. (Co-Principal), Dahotre, N. B. (Principal), Voevodin, A. A. (Co-Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Engineered Materials and Materials Design of Engineered Materials," Sponsored by Northeastern University (Army Natick Subcontract), Federal, $1000000 Funded. (2018 – 2019).
Yu, C. (Principal), "Investigation on bolted connections in cold-formed steel members using J429 SAE bolts," Sponsored by American Iron and Steel Institute, Private, $6000 Funded. (February 2018 – January 2019).
Mukherjee, S. (Principal), Mishra, R. S. (Co-Principal), Voevodin, A. A. (Co-Principal), Schultz, D. R. (Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Light Weight Composite Structures for Advanced Tactical Shelters," Sponsored by Northeastern University (Army Natick Subcontract), Federal, $873283 Funded. (2016 – 2018).
Dahotre, N. (Principal), Yu, C. (Co-Principal), Mukherjee, S. (Co-Principal), Nasrazadani, S. (Co-Principal), Zhang, H. (Principal), Voevodin, A. (Co-Principal), Zhang, H. (Co-Principal), "Light Weight Composite Structures for Advanced Tactical Shelters-Year 2," Sponsored by Northeastern University (Army Natick Subcontract), Federal, $999999 Funded. (September 01, 2017 – August 31, 2018).
Yu, C., "Load Bearing Clip Angle Design – Phase Two," Sponsored by American Iron and Steel Institute, Private, $57643 Funded. (March 1, 2016 – March 1, 2018).
Yu, C. (Principal), "PFI:AIR-TT Innovative High-Performance Cold-Formed Steel Walls for Light Framed Construction," Sponsored by National Science Foundation, Federal, $257521.00 Funded. (September 1, 2014 – January 31, 2017).
Grant - Teaching
Yu, C., "GP20150: 2021 TEXO Construction Department Grant," Sponsored by TEXO Foundation, Regional, $5000 Funded. (January 2022 – September 2022).
Yu, C. (Principal), "TEXO Grant to Improve Classroom Capacity," Sponsored by TEXO Foundation, Private, $3000 Funded. (March 1, 2019 – December 31, 2019).
Sponsored Research
Yu, C., "GP20184: Verification of AISI S310 Design Methods for Cold-Formed Steel Framed Shear Walls Sheathed by Corrugated Sheets," Sponsored by American Iron and Steel Institute, National, $10000 Funded. (June 2023 – May 2024).
Yu, C., "GP00124: Behavior and Performance of INNO Cold-Formed Steel Long Span Roof Trusses," Sponsored by INNO Metal Studs Corporation, National, $16264 Funded. (May 2023 – August 2023).
Yu, C., "GP20155 Distortional Buckling Analytical Expressions for Cold-Formed Steel Framing," Sponsored by American Iron and Steel Institute, National, $12000 Funded. (June 2022 – December 2022).
Yu, C., "GP00098: Analysis and Design of Casing Panels.," Sponsored by Baltimore Aircoil Company, Private, $40000 Funded. (August 1, 2021 – March 30, 2022).
Yu, C., "GP00112: Tensile Strength of Inserts of Tiltwall Panel Lifting System-Phase 2," Sponsored by Tiltwall Headquarters & Supplies, Private, $2063 Funded. (December 2021 – January 2022).
Yu, C., "GP000101: Behavior and Performance of Light Frame Shear Walls Sheathed by Composite Panels," Sponsored by Ectek International Inc., International, $30000 Funded. (July 2021 – November 2021).
Yu, C., "GP00090: Behavior and Performance of Light Frame Shear Walls Sheathed by Composite Panels," Sponsored by Ectek International Inc., International, $31000 Funded. (April 1, 2021 – September 30, 2021).
Yu, C., "GP00096: Behavior and Performance of Screw Connection at Chord-Web Joint of Advant Trusses," Sponsored by Advant Steel, LLC, Private, $4888 Funded. (June 1, 2021 – August 30, 2021).
Yu, C., "Tensile Strength of Inserts of Tiltwall Panel Lifting System," Sponsored by Tiltwall Headquarters & Supplies, Private, $1901 Funded. (June 1, 2021 – July 30, 2021).
Yu, C., "Analysis of Cold-Formed Steel Framed Shear Walls Sheathed by MegaBoard," Sponsored by Ectek International Inc., Private, $23500 Funded. (June 2020 – March 2021).
Yu, C., "Testing Special Hinge Connections," Sponsored by Universal Storage Containers, Private, $6500 Funded. (October 2020 – December 2020).
Yu, C., "Testing of Cold-Formed Steel Framed Shear Walls for Frame-CAD," Sponsored by FRAMECAD America, Private, $7000 Funded. (September 2020 – December 2020).
Yu, C., "Analysis of Nucor Bolted Connections for Cold-Formed Steel," Sponsored by Nucor Buildings Group, National, $11000 Funded. (June 2020 – September 2020).
Yu, C., "Equivalent Section Properties of Cold-Formed Steel Members," Sponsored by Hilti Inc., Private, $20043 Funded. (November 1, 2019 – May 31, 2020).
Yu, C., "Thermal Conductivity of Cold-Formed Steel Supported Concrete Panels," Sponsored by Hi-Tech Tilt, Private, $4000 Funded. (August 1, 2019 – September 30, 2019).
Uncategorized
Yu, C. (Principal), "CAREER: Comprehensive Research on Cold-Formed Steel Sheathed Shear Walls: Special Detailing, Design, and Innovation," Sponsored by National Science Foundation, $400010. (2010 – 2015).
Yu, C. (Principal), "Structural Behavior of CFS Trusses-Phase 2," Sponsored by KEYMARK Enterprises, LLC, $10000. (2014 – 2014).
Yu, C. (Principal), "Cold-Formed Steel Clip Angle Design," Sponsored by American Iron and Steel Institute, $20000. (2013 – 2014).
Yu, C. (Principal), "Structural Behavior of CFS Trusses," Sponsored by KEYMARK Enterprises, LLC, $3500. (2013 – 2013).
Yu, C. (Principal), "Construction Department Grant," Sponsored by TEXO Foundation, $5000. (2012 – 2013).
Yu, C. (Principal), "Enhance UNT's Education and Research Capacities through Linkages with Top Universities in China and Thailand," Sponsored by Charn Uswachoke 2012 Grant, UNT-I, $5000. (2012 – 2013).
Yu, C. (Principal), "Bolted Connections, 50 ksi NT3.0 and Commercial Web," Sponsored by NUCONSTEEL Commercial Corp., $2500. (2011 – 2012).
Yu, C. (Principal), "Hybrid Truss Web Doubler Test - Phase 2," Sponsored by NUCONSTEEL Commercial Corp., $3000. (2011 – 2012).
Yu, C. (Principal), "NTC-6 Clip Capacity - Phase 2," Sponsored by NUCONSTEEL Commercial Corp., $5000. (2011 – 2012).
Yu, C. (Principal), "Bolted Connections with Screws, 50 ksi NT2.0 and Commercial Web," Sponsored by NUCONSTEEL Commercial Corp., $2700. (2011 – 2011).
Yu, C. (Principal), "Capacity of NTC-2, -3, and -5 Clips," Sponsored by NUCONSTEEL Commercial Corp., $5000. (2011 – 2011).
Yu, C. (Principal), "CFS Bolted Connection using 70 ksi NT3.0 & Commercial Web," Sponsored by NUCONSTEEL Commercial Corp., $3000. (2011 – 2011).
Yu, C. (Principal), "Corrugated Shear Panel and NTC-6 Clip Capacity," Sponsored by NUCONSTEEL Commercial Corp., $3000. (2011 – 2011).
Yu, C. (Principal), "Finite element analysis on cold-formed steel hat sections," Sponsored by NUCONSTEEL Commercial Corp., $2500. (2011 – 2011).
Yu, C. (Principal), "Hybrid truss web doubler," Sponsored by NUCONSTEEL Commercial Corp., $2500. (2011 – 2011).
Yu, C. (Principal), "Material properties fo steel samples," Sponsored by NUCONSTEEL Commercial Corp., $1000. (2011 – 2011).
Yu, C. (Principal), "NTC-6R Clip Capacity," Sponsored by NUCONSTEEL Commercial Corp., $2000. (2011 – 2011).
Yu, C. (Principal), "NuTruss 2.0 Continuous Beam and Roof Truss Tests," Sponsored by NUCONSTEEL Commercial Corp., $4000. (2011 – 2011).
Yu, C. (Principal), "Single Sided Fastener Connection using 70 ksi NT3.0 Chord and Commercial Web," Sponsored by NUCONSTEEL Commercial Corp., $2500. (2011 – 2011).
Yu, C. (Principal), "Web Crippling Test on Metwood Rim Beam - 68 mil 50 ksi Type A," Sponsored by NUCONSTEEL Commercial Corp., $2500. (2011 – 2011).
Yu, C. (Principal), "Strength of Load Distribution Members," Sponsored by NUCONSTEEL Commercial Corp., $3004. (2010 – 2011).
Yu, C. (Principal), "Bolted Connections using 50 ksi NT2.0 Commericial Chord and Web Members," Sponsored by NUCONSTEEL Commercial Corp., $2454. (2010 – 2010).
Yu, C. (Principal), "Compression Strength of Truss Chord Members," Sponsored by NUCONSTEEL Commercial Corp., $3239. (2010 – 2010).
Yu, C. (Principal), "Strength of SSMA Stud-Track Connections," Sponsored by NUCONSTEEL Commercial Corp., $2962. (2010 – 2010).
Yu, C. (Principal), "Probabilistic Structural Safety Assessment of Bolted Connections for Building Exposed to Seismic and Wind Hazards," Sponsored by UNT-UAEM Research Seed Funding Program, $5000. (2009 – 2010).
Yu, C. (Principal), "Testing and Analysis of Cold-Formed Steel Connections with Bolts in Oversize Holes or Short Slots without Washers-Phase 2," Sponsored by American Iron and Steel Institute, $40943. (2008 – 2010).
Yu, C. (Principal), "Eccentrically Loaded Cold-Formed Steel Wall Stud Walls," Sponsored by Nucor Corporation, $29544. (2008 – 2009).
Yu, C. (Principal), "Outfitting Academic Laboratories for Construction Engineering Technology (CNET) Program," Sponsored by QUOIN Foundation, $4000. (2008 – 2009).
Yu, C. (Principal), "Shear Resistance of Cold-Formed Steel Stud Walls with Wider Range of Options in Steel Sheathing - Phase Two," Sponsored by American Iron and Steel Institute, $21332. (2008 – 2009).
Yu, C. (Principal), "Testing and Analysis of Cold-Formed Steel Structures," Sponsored by NUCONSTEEL Commercial Corp., $286590. (2008 – 2009).
Yu, C. (Principal), "Shear Resistance of Cold-formed Steel Framed Shear Wall Assemblies for Mid-rise Construction," Sponsored by Worthington Industries, $11955. (2008 – 2008).
Yu, C. (Principal), "Construction Department Grant," Sponsored by QUOIN Foundation, $3000. (2007 – 2008).
Yu, C. (Principal), "Testing and Analysis of Cold-Formed Steel Connections with Bolts in Oversize Holes or Short Slots without Washers," Sponsored by American Iron and Steel Institute, $52843. (2007 – 2008).
Yu, C. (Principal), "Testing and Analysis of Cold-Formed Steel Structures," Sponsored by NUCONSTEEL Commercial Corp., $280794. (2007 – 2008).
Yu, C. (Principal), "Construction Department Grant," Sponsored by QUOIN Foundation, $3000. (2006 – 2007).
Yu, C. (Principal), "Shear Resistance of Cold-Formed Steel Stud Walls with Wider Range of Options in Steel Sheathing," Sponsored by American Iron and Steel Institute, $16155. (2006 – 2007).
Yu, C. (Principal), "Towards Design Provisions for Cold-Formed Steel Beams with Edge Stiffened Perforations," Sponsored by UNT Faculty Research Grant, $5000. (2006 – 2007).
Yu, C. (Principal), "Cold-Formed Steel Structures Analysis," Sponsored by NUCONSTEEL Commercial Corp., $208234. (2005 – 2006).
Yu, C. (Principal), "Effective Width Method Based Cold-Formed Steel Design for Distortional Buckling," Sponsored by UNT Faculty Research Grant, $5000. (2005 – 2006).

Copyrights, Patents

Patent
Yu, C., Martin, J., Haws, R., "In-Frame Shear Wall," 11,326,344. Regular, United States, Date Patent Approved: May 10, 2022 –.
Yu, C., Martin, J., Haws, R., "In-Frame Shear Wall," 10,822,793. Regular, United States, Date of Patent Application: March 23, 2017 –. Date Patent Approved: November 2020 –.

Awards and Honors

2023 World's Top 2% Scientists, Stanford Universty. (January 2023 – December 2023).

2022 World Top 2% Scientists, Stanford University. (2022 – 2022).

2021 World Top 2% Scientists, Stanford University. (2021 – 2021).

Faculty Early Career Development (CAREER) Award, National Science Foundation. (2010 – 2015).

Service

University Service

Guest Speaker, UNT Fall 2022 Preview Day Presentation. (November 19, 2022 – Present).

Faculty Mentor, Faculty Mentor for Dr. Salar Shirkhanloo. (September 1, 2022 – Present).

Committee Member, ABET Committee. (August 2021 – Present).

Committee Member, College of Engineering Faculty Council. (August 2021 – Present).

Committee Member, College of Engineering Personnel Affairs Committee. (August 2021 – Present).

Program Coordinator, Construction Management Program. (August 2021 – Present).

Committee Member, ME Department PAC. (August 2021 – Present).

Committee Member, Undergraduate Programs Committee. (August 2021 – Present).

Committee Member, Curriculum Committee. (February 2021 – Present).

Committee Member, Graduate Committee. (February 2021 – Present).

Committee Member, Chair Search Committee. (January 2021 – Present).

Program Coordinator, Construction Engineering Technology Program. (August 2020 – Present).

Committee Member, Research and Teaching Awards Committee. (April 2020 – Present).

Other, Advocates and Allies Program. (November 29, 2016 – Present).

Committee Member, College of Engineering Faculty Council. (August 20, 2013 – Present).

Committee Member, College Scholarship Committee. (September 1, 2009 – Present).

Guest Speaker, UNT Spring 2024 Preview Day Presentation. (February 24, 2024 – February 24, 2024).

Guest Speaker, UNT Spring 2023 Preview Day Presentation. (March 4, 2023 – March 4, 2023).

Chairperson, Search Committee for Clinical Associate/Assistant Professor. (August 2021 – August 30, 2022).

Committee Member, By-laws and Charter Committee. (September 1, 2020 – 2021).

Program Coordinator, Construction Engineering Technology Program. (February 2021 – August 2021).

Committee Member, Ad Hoc Committee for CENG faculty teaching and research awards. (March 2021 – May 2021).

Program Coordinator, ETEC CNET Program. (August 15, 2017 – 2020).

Committee Member, ETEC Graduate Committee. (August 15, 2012 – 2020).

Committee Chair, Personeel Affairs Committee. (August 20, 2017 – 2019).

Committee Chair, Clinical Assistant/Associate Professor Search Committee. (November 2018 – May 2019).

Committee Chair, COE Administrator Evaluation Committee for Chair. (October 2018 – May 2019).

Committee Member, Leadership Committee. (May 2, 2019 – May 2, 2019).

Other, NSF CAREER Workshop. (April 17, 2019 – April 17, 2019).

Guest Speaker, Review of CNET program at ENGR1030 Course. (March 26, 2019 – March 26, 2019).

Faculty Mentor, Faculty Mentor for Dr. Huseyin Bostanci. (August 15, 2012 – 2018).

Guest Speaker, Fall 2018 UNT Presentation at Preview Day. (November 3, 2018 – November 3, 2018).

Committee Chair, Faculty Search Committee for Senior Lecturer. (August 15, 2017 – April 2018).

Committee Member, Personnel Affairs Committee. (August 15, 2011 – August 15, 2017).

Committee Chair, MEET Faculty Search Committee. (January 15, 2017 – May 15, 2017).

Committee Chair, Faculty Search Committee for Senior Lecturer. (August 15, 2016 – May 15, 2017).

Committee Chair, Faculty Search Committee for Visiting Lecturer. (May 1, 2016 – August 15, 2016).

Program Coordinator, CNET Program. (August 15, 2005 – August 15, 2016).

Program Coordinator, CNET Program Coordinator. (September 2005 – May 2015).

Committee Chair, CNET Faculty Search Committee. (2012 – 2012).

Committee Member, ETEC Chair Search Committee. (2011 – 2011).

Task Force Member, Task Force for Sustainable Arch Program. (2011 – 2011).

Professional Service

Committee Member, International Scientific Committee, Lisbon. (2018 – Present).

Editorial Review Board Member, Thin-Walled Structures. (2018 – Present).

Editorial Review Board Member, Engineering Mechanics Journal. (2015 – Present).

Editorial Review Board Member, Journal of Steel Structure and Construction. (2015 – Present).

Editor, Associate Editor, ASCE Journal of Materials in Civil Engineering. (2011 – Present).

Member, Committee on Cold-Formed Members, American Society of Civil Engineers. (2010 – Present).

Member, CFSEI Technical Document Committee. (2007 – Present).

Member, Committee on Framing Standards of American Iron and Steel Institute. (2006 – Present).

Member, Committee on Specifications of American Iron and Steel Institute. (2005 – Present).

Reviewer, Grant Proposal, National Science Foundation. (November 2023 – December 2023).

Committee Member, International Scientific Committee, Thin-Walled Structures Ninth International Conference, Sydney. (January 2023 – December 31, 2023).

Committee Member, National Steel Bridge Alliance / AASHTO/NSBA Collaboration TG 15 Data Modeling for Interoperability. (January 2022 – December 2023).

Member, National Steel Bridge Alliance/AASHTO/NSBA Collaboration TG 15 Data Modeling for Interoperability, Chicago, IL. (January 1, 2022 – December 31, 2023).

External T&P Letter Writer, Elizabethtown College. (2022).

Reviewer, Grant Proposal, National Science Foundation. (2022 – 2022).

External T&P Letter Writer, SUNY Polytechnic Institute. (2022).

Other, University of Sydney/External PhD Dissertation Examiner, Sydney. (2022).

Program Organizer, 2022 CFSRC Colloquium. (October 2022).

Session Chair, 2020 CFS Colloquium. (October 20, 2020 – October 21, 2020).

Other, University of Sydney/External PhD Dissertation Examiner, Sydney. (2019).

Other, TG05 SSRC. (2011 – 2015).

Public Service

Other, National Society of Black Engineers, Denton, TX. (October 13, 2023 – October 14, 2023).

Other, SparkSTEM, Texas. (March 2021 – April 2021).

Member, Technical Assistance Panel, Texas Department of Transportation. (2005 – 2015).

Awards and Honors

Nominated for: ASCE Fellow, American Society of Civil Engineers. (March 1, 2024 – Present).

Nominated for: SEI Fellow, Structural Engineering Institute, American Society of Civil Engineers. (February 2021 – Present).

2023 Panel Fellow, NSF CMMI’s Game Changer Academies for Advancing Research Innovation, National Science Foundation. (October 2023 – June 2024).

UNT 15 Year Service Award, UNT. (January 2021 – December 2021).

Outstanding Reviewer Award, Journal of Constructional Steel Research, Elsevier. (2018 – 2018).

Outstanding Reviewer Award, Thin-Walled Structures, Elsevier. (2018 – 2018).

Outstanding Reviewer Award, American Society of Civil Engineers. (2011 – 2011).