American Society of Mechanical Engineering. (January 2014 – Present).
American Society of Engineering Education. (January 2013 – Present).
Member, Institute of Electrical and Electronics Engineers. (2013 – Present).
Workshop,"National Effective Teaching Institute work shop," ASEE, San Antonio, TX, United States of America. (June 25, 2011 – June 28, 2011).
University of Nebraska-Lincoln, Mechanics of materials and Statics, Summer 2009.
Dissertation Committee Co-Chair, Electrical Engineering. (June 2023 – Present).
Doctoral Advisory Committee Chair,"Surface acoustic wave sensor for particals monitoring," Electrical Engineering. (September 2022 – May 2025).
Dissertation Committee Member, Mechanical and Energy Engineering. (January 1, 2021 – December 31, 2024).
Doctoral Advisory Committee Chair,"NDE of AM materials," Mechanical and Energy Engineering. (September 2020 – January 2024).
Dissertation Committee Member, Mechanical and Energy Engineering. (September 1, 2020 – September 1, 2023).
Dissertation Committee Member, Mechanical and Energy Engineering. (September 1, 2020 – September 1, 2023).
Doctoral Advisory Committee Member, Engineering Technology. (January 2020 – May 2023).
Master's Thesis Committee Co-Chair,"PM2.5 PARTICLE SENSING WITH AND FIT FACTOR TEST OF THE RESPIRATOR WITH SAW BASED SENSOR," Electrical Engineering. (September 2020 – December 2022).
Major Professor, Electrical Engineering. (September 1, 2020 – June 1, 2021).
Doctoral Advisory Committee Chair,"Piezoelectric gas sensor for the monitoring of gas turbine engine," Mechanical and Energy Engineering. (January 2015 – September 2019).
Master's Thesis Committee Chair, Mechanical and Energy Engineering. (January 2017 – May 2019).
Postdoctoral Research Supervision, Mechanical and Energy Engineering. (April 2018 – April 2019).
Master's Thesis Committee Chair,"Robtic car design for tacticle shelter," Mechanical and Energy Engineering. (December 2018).
Postdoctoral Research Supervision, Mechanical and Energy Engineering. (February 2018 – June 2018).
Master's Thesis Committee Chair,"Piezoelectric energy harvesting floor," Mechanical and Energy Engineering. (May 2018).
Postdoctoral Research Supervision, Mechanical and Energy Engineering. (March 2017 – January 2018).
Postdoctoral Research Supervision, Mechanical and Energy Engineering. (January 2016 – January 2018).
Master's Thesis Committee Chair,"Piezoelectric pressure sensor design," Engineering Technology. (December 2017).
Master's Thesis Committee Chair,"wide band piezoelectric energy harvester," Materials Science and Engineering. (May 2017).
Master's Thesis Committee Chair,"Structual health monitoring at high temperatures," Engineering Technology. (December 2014).
Master's Thesis Committee Chair, Engineering Technology. (December 2013).
Master's Thesis Committee Chair,"Self-powered langasite force sensors," Engineering Technology. (December 2013).
Master's Thesis Committee Member,"Analytical models for cold-formed steel shear walls sheathed with steel sheets and wood-based panels," Engineering Technology. (May 2013).
Master's Thesis Committee Chair,"Direct strength method for web crippling strength of cold-formed steel C sections," Engineering Technology. (December 2012).
Master's Thesis Committee Chair, Engineering Technology. (December 2012).
Master's Thesis Committee Member,"Effects of Processing Techniques on Mechanical Properties of Selected Polymers," Engineering Technology. (December 2012).
Master's Thesis Committee Chair,"Drive level dependence of advanced piezoelectric resonators," Engineering Technology. (August 2012).
Master's Thesis Committee Member,"Nominal shear strength of cold-formed steel shear walls using OSB sheathing," Engineering Technology. (May 2012).
Master's Thesis Committee Member,"Bearing strength of cold formed steel bolted connections in trusses," Engineering Technology. (May 2012).
Master's Thesis Committee Member, Engineering Technology. (May 2012).
Master's Thesis Committee Member,"Effect of Polyphosphoric Acid on Aging Characteristics of PG 64-22 Asphalt Binder," Engineering Technology. (December 2010).
Master's Thesis Committee Member,"Application of FTIR for Cement Phase Identification and Quantification of Alkali in Cement," Engineering Technology. (December 2010).
Master's Thesis Committee Chair,"Ultrasonic theory of material properties," Engineering Technology. (May 2010).
Zhang, H. (Author), ASME SMASIS Conference, Surface acoustic wave quartz resonators for nondestructive structural monitoring of nuclear spent fuel canisters by measuring internal pressure at elevated temperature, DOE, Austin, TX, United States of America. (2023 – 2023).
Zhang, H. (Author), 2022 IEEE Sensor conference, 1. Mitali Hardik Desai, Muhammad Zubair Aslam, Shuai Ju, Haifeng Zhang, PM2.5 Particles Detection by Using a Highly Sensitive Lithium niobate SAW Sensor,”, Dallas, TX, United States of America. (2022).
Zhang, H. (Author & Presenter), 2022 IFAC Mechatronics & MoViC, Design of a 360-degree piezoelectric assembly for continuous wide band energy harvesting, Los Angeles, CA, United States of America. (2022).
Zhang, H. (Author), Passive Wireless Sensor Technology(PWST) Workshop at IEEE WISEE 2019, Miniaturized Langasite-based BAW/SAW Resonant sensors in hash environments, Ottawa, Canada, Canada. (2019 – 2019).
Zhang, H. (Author), 31st Annual Electronics Packaging Symposium- Small Systems Integration, High temperature CO2 sensing characteristics of Langasite based SAW sensor and Langasite MEMS micro-cantilever gas sensor, Niskayuna, New York, United States of America. (2019 – 2019).
Zhang, H. (Co-Chair), 2019 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Piezoelectric based sensors for simultaneous viscosity and density measurement, Anaheim, CA, United States of America. (2019 – 2019).
Zhang, H. (Author), 2019 SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, Langasite-based BAW resonator coated with ZnO for high temperature CO2 gas sensing with temperature compensation,, Denver, CO, United States of America. (2019 – 2019).
Zhang, H. (Author), 2019 SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, O2 sensing characteristics of SAW sensor operating at high temperature,, Denver, CO, United States of America. (2019 – 2019).
Zhang, H. (Author), ASME International Mechanical Engineering Congress and Exposition, Optimized design of tuned mass damper for floor vibration suppression, Pittsburg, PA, United States of America. (2018 – 2018).
Zhang, H. (Author & Presenter), Review of Progress in Quantitative Nondestructive Evaluation, Measurement of nonlinear elastic constants of AM steel, Burlington, Vermont, United States of America. (2018 – 2018).
Zhang, H. (Author), 2018 SPIE smart material conference, Design of piezo actuated torsional resonator for fluid viscosity measurement, Denver,CO, United States of America. (2018 – 2018).
Zhang, H. (Author), Pacific Northwest National Lab seminar, Harsh-enviroment piezoelectric resonant sensing, Tri city, WA, United States of America. (2017).
Zhang, H. (Author), National Energy Research lab, Design of harsh environment piezoelectric sensor, Pittsburg, PA, United States of America. (2017).
Zhang, H. (Author), Annual Review of Progress in Quantitative Nondestructive Evaluation,, High-Temperature Through-Wall Data Communication Based on Reflection Wave Modulation Technique, Provo, UT, United States of America. (2017).
Zhang, H. (Author), 2017 Joint IEEE ISAF – IWATMD – PFM conference, High Temperature Ultrasound Through Wall Data Communication, IEEE, Atlanta, GA, United States of America. (2017).
Zhang, H. (Author), SPIE Smart Structures conference, A new resonance based method for the measurement of magnetic field intensity, SPIE, Las Vegas, NV, United States of America. (2016).
Zhang, H. (Author), SPIE Smart Structures conference, Piezoelectric PMN-PT-based Smart Viscometer for Viscous Fluid Monitoring, SPIE, Las Vegas, NV, United States of America. (2016).
Zhang, H. (Author), Joint IEEE International Frequency Control Symposium and Precise Time and Time Interval (PTTI) Systems and Applications, Analysis of Contributions of Nonlinear Material Constants to Temperature-induced Velocity Shifts of Quartz and Langa-site Surface Acoustic Wave Resonators,, IEEE, Denver, CO, United States of America. (2015).
Zhang, H. (Author), SPIE Smart Structures conference, Rotating beam flexural vibrations in perpendicular directions as a wideband piezoelectric energy harvester, SPIE, San Diego, CA, United States of America. (2015).
Zhang, H. (Author), The 12th International Conference on Motion and Vibration, Feasibility Study of LangasiteWafer Active Sensors for High Temperature Structural Health Monitoring, Sapporo, Japan, Japan. (2014).
Zhang, H. (Author), SPIE Smart Structures conference, Modeling of wide-band frequency-adjustable piezoelectric bimorph rnergy harvester, San Diego, CA, United States of America. (2014).
Zhang, H. (Author), Joint IEEE International Frequency Control Symposium and Precise Time and Time Interval (PTTI) Systems and Applications,, A wireless langasite resonant electrical field/voltage sensor,” Joint IEEE International Frequency Control Symposium and Precise Time and Time Interval (PTTI) Systems and Applications, Prague, Czech Republic, Czech Republic. (2013).
Zhang, H. (Author), SPIE Smart Structures conference, Measurement of elastic constants of rail steel at elevated temperatures using ultrasound, sonic resonance, and laser detection methods, SPIE, San Diego, CA, United States of America. (2013).
Zhang, H. (Author), IEEE International Frequency Control Symposium, Wireless langasite resonator as a force sensor, IEEE, Baltimore, MD, United States of America. (2012).
Zhang, H. (Author), IEEE International Frequency Control Symposium, Drive level dependence of doubly rotated langasite resonators with different configurations, Baltimore, MD, United States of America. (2011).
Zhang, H. (Author), IEEE International Frequency Control Symposium, Optimal cuts to extract the third-order elastic constants of langasite single crystals, IEEE, Newport Beach, California, United States of America. (2010).
Zhang, H. (Author), 158th Meeting of The Acoustic Society of America, Sensitivity analysis of measurements associated with nonlinear material constants for piezoelectric crystals, ASA, San Antonio, TX, United States of America. (2009).
Zhang, H. (Author), Northrop Grumman Aerospace Systems seminar, Electroelastic effect of thickness mode langasite resonators, Northrop Grumman, Redondo Beach, CA, United States of America. (2008).
Zhang, H. (Author), IEEE International Ultrasonics Symposium, Determination of third-order elastic constants of langasite single crystals through force-frequency effect, IEEE, New York, United States of America. (2007).
Jin, Y. (Author & Presenter), Ju, S. (Author), Heo, H. (Author), Walker, E. (Author), Zhang, H. (Author), Neogi, A. (Author), Choi, T. (Author), IMECE, Comparison between temperature-dependent mechanical properties of thermo-responsive Poly (vinyl alcohol) Poly (N-isopropyl acrylamide) hydrogel and non-thermo-responsive Alginate hydrogel, Pittsburgh, United States of America. (2018 – 2018).
Committee Member, MEEN department graduate committee. (January 2023 – September 2024).
Committee Member, MEEN department faculty search committee. (September 2022 – September 2024).
Committee Chair, PAC committee. (September 2022 – September 2024).
Committee Member, Undergraduate Curriculum. (September 2022 – September 2024).
Committee Member, College of Engineering faculty council. (May 2018 – May 2022).
Committee Chair, Research committee. (September 2017 – September 2021).
Committee Member, UNT initiative supporting women faculty— Advocates and Allies. (October 2017 – October 2018).
Other, ASME adaptive materials and structure. (2023 – Present).
Officer, Secretary, ASME Structural Health Monitoring technical committee. (2023 – Present).
Committee Member, Campus representative of ASEE. (March 2015 – Present).
Committee Member, ASME Adaptive structure and materials branch. (May 2019 – May 2024).
Committee Member, ASME energy harvesting committee. (May 2017 – May 2024).
Chairperson, 31st ASME Conference on Mechanical Vibration and Noise. (October 2019 – October 2019).