Mishra, R. S. (2005). Creep deformation and fracture, design, and life extension: proceedings of a symposium sponsored by Materials Science & Technology 2005 (MS&T’05): held in Pittsburgh, Pennsylvania, USA, September 25-28, 2005. TMS Publications.
Burford, D. A., Manzo, M., Siller Carrillo, H. R., Mishra, R. S., Gaddam, S., Gumaste, a., Koonce, J., Saez, A. (2023). Submerged Bobbin Tool (SBT) Tunneling Technology. Friction Stir Welding and Processing XII, TMS 2023. The Minerals, Metals & Materials Series. Springer, Cham. (2023). https://doi.org/10.1007/978-3-031-22661-8_23
Sittiho, A., Tungala, V., Charit, I., Mishra, R. S. (2017). Understanding Microstructure and Mechanical Properties of Friction Stir Processed Aluminum-Bearing High-Chromium Ferritic Stainless Steel. Mechanical and Creep Behavior of Advanced Materials. 263–272. Springer International Publishing.
Xu, J., Cao, C., Das, S., Chen, L., Ma, C., Mishra, R. S., Li, X. (2015). High Performance Mg6Zn Nanocomposites Fabricated through Friction Stir Processing. Magnesium Technology 2015. 383–386. Springer International Publishing.
Mishra, R. S., De, P. S., Kumar, N. (2014). Dissimilar Metal Friction Stir Welding. Friction Stir Welding and Processing. 237–258. Springer International Publishing.
Mishra, R. S., De, P. S., Kumar, N. (2014). Friction stir processing. Friction Stir Welding and Processing. 259–296. Springer International Publishing.
Mishra, R. S., De, P. S., Kumar, N. (2014). FSW of aluminum alloys. Friction Stir Welding and Processing. 109–148. Springer International Publishing.
Mishra, R. S., De, P. S., Kumar, N. (2014). Fundamental Physical Metallurgy Background for FSW/P. Friction Stir Welding and Processing. 59–93. Springer International Publishing.
Mishra, R. S., De, P. S., Kumar, N. (2014). Residual Stresses and Mitigation Strategies. Friction Stir Welding and Processing. 297–326. Springer International Publishing.
Das, S., Mishra, R., Doherty, K., Cho, K., Davis, B., DeLorme, R. (2013). Magnesium Based Composite via Friction Stir Processing. Friction Stir Welding and Processing VII. 245–252. Springer International Publishing.
Jiang, L., Jonas, J., Mishra, R. (2011). Influence of Solute Cerium on the Deformation Behavior of a Mg-0.5 wt.% Ce Alloy. Magnesium Technology 2011. 333–337. Springer International Publishing.
Jain, V., Su, J., Mishra, R., Verma, R., Javaid, A., Aljarrah, M., Essadiqi, E. (2011). Microstructure and Mechanical Properties of Mg-1.7 Y-1.2 Zn Sheet Processed by Hot Rolling and Friction Stir Processing. Magnesium Technology 2011. 565–570. Springer International Publishing.
Mishra, R. S. (2009). Bulk nanomaterials from friction stir processing: Features and properties. Bulk Nanostructured Materials. 255–272. Wiley-VCH Verlag GmbH & Co KGaA Weinheim.
Ajayan, P. M., Vajtai, R. (2007). Controlled Processes for Growth of Carbon Nanotube Structures. Materials Processing Handbook. 1–13. CRC Press.
Charit, I., Mishra, R. S. (2007). Superplasticity and Superplastic Forming. Materials Processing Handbook. 14–1. CRC Press.
Mishra, R., McFadden, S., Mukherjee, A. (2000). Tensile superplasticity in nanocrystalline materials produced by severe plastic deformation. Investigations and Applications of Severe Plastic Deformation. 231–240. Springer Netherlands.
Banerjee, D., Gogia, A., Nandy, T., Muraleedharan, K., Mishra, R. (1993). The physical metallurgy of Ti 3 Al based alloys. Structural intermetallics.
Burford, D. A., Manzo, M., Siller Carrillo, H. R., Gaddam, S., Gumaste, A., Koonce III, J., Saez, A., Mishra, R. S. (2023). Submerged Bobbin Tool (SBT) Tunneling Technology. TMS2015 Supplemental Proceedings. (2023), . TMS Materials Processing and Manufacturing Division, TMS: Shaping and Forming Committee.
Varshney, P., Mishra, R. S., Kumar, N. (2021). Stress Corrosion Cracking of TRIP Fe<inf>39</inf>Mn<inf>20</inf>Co<inf>20</inf>Cr<inf>15</inf>Si<inf>5</inf>Al<inf>1</inf> (at.%) High Entropy Alloy. Minerals, Metals and Materials Series. 5, 742-750. https://api.elsevier.com/content/abstract/scopus_id/85104438748
Mishra, R. S. (2020). Hierarchically Structured Ultrafine Grained Magnesium Alloys. Minerals, Metals and Materials Series. 7-11. https://api.elsevier.com/content/abstract/scopus_id/85081660183
Komarasamy, M., Tharp, R., Sinha, S., Thapliyal, S., Mishra, R. S. (2019). Achieving Forced Mixing in Cu-Based Immiscible Alloys via Friction Stir Processing. Minerals, Metals and Materials Series. 199-208. https://api.elsevier.com/content/abstract/scopus_id/85064729898
Wang, T., Mishra, R. S. (2019). Effect of Stress Concentration on Strength and Fracture Behavior of Dissimilar Metal Joints. Minerals, Metals and Materials Series. 33-39. https://api.elsevier.com/content/abstract/scopus_id/85064747426
Sahlot, P., Mishra, R. S., Arora, A. (2019). Wear Mechanism for H13 Steel Tool During Friction Stir Welding of CuCrZr Alloy. Minerals, Metals and Materials Series. 59-64. https://api.elsevier.com/content/abstract/scopus_id/85064757053
Alagarsamy, K., Fortier, A., Mishra, R. S., Kumar, N. (2016). Investigation of thermo-mechanical processing and mechanical properties of CoCrFeNiMn high entropy alloy for peripheral vascular stent application. ASME 2016 11th International Manufacturing Science and Engineering Conference. V001T02A059–V001T02A059.
Pasebani, S., Dutt, A. K., Charit, I., Mishra, R. S. (2014). Nickel-Chromium Alloys: Engineered Microstructure via Spark Plasma Sintering.. Materials Science Forum.
Suresh, K., Kumar, N., Mishra, R. S., Suwas, S. (2013). Evolution of microstructure and texture in friction stir processed Al-Mg-Mn alloy. Materials Science Forum. 753, 247–250.
Panigrahi, S., Kandasamy, K., Kumar, N., Mishra, R., DeLorme, R., Davis, B., Howell, R., Cho, K. (2012). Critical Grain Size for Change in Tensile Deformation Behavior and Transition in Tension- Compression Asymmetry in a Magnesium Alloy. AIP Conference Proceedings.
Panigrahi, S., Mishra, R., Delorme, R., Davis, B., Howell, R., Cho, K. (2012). Development of Ultrafine Grained Mg-Y-RE Alloy by Multi PassFriction Stir Processing. AIP Conference Proceedings.
Jain, V., Yuan, W., Mishra, R., Gupta, A. K., others, (2012). Directional Anisotropy in the Mechanical Behavior of Friction Stir Processed and Aged AZ91 Alloy. Materials Science Forum. 702, 64–67.
Argade, G., Kumar, N., Mishra, R. S. (2012). Effect of Corrosive Environment on High Cycle Fatigue of Friction Stir Welded Al-Mg Alloy. AIP Conference Proceedings.
Komarasamy, M., Kumar, N., Mishra, R. S. (2012). Fatigue Behavior of Friction Stir Processed Ultrafine Grained 8242 Al Alloy. AIP Conference Proceedings.
Mohan, A., Mishra, R. S. (2012). Influence of Ultrafine Grained Microstructure on the Superplastic Deformation Mechanism of 7075 Al Alloy. AIP Conference Proceedings.
Prabhakaran, R., Wang, J., Miller, B., Cole, J., Charit, I., Mishra, R. S., Murty, K. (2012). Irradiation Studies on Friction Stir Welded MA 956 and MA 754. AIP Conference Proceedings.
Mishra, R. S. (2012). Optimization of Mechanical Properties in Ultrafine Grained Lightweight Alloys. AIP Conference Proceedings.
Kumar, N., Panigrahi, S., Mishra, R. S., Delorme, R., Davis, B., Howell, R., Cho, K. (2012). Quasi-Static and Dynamic Compressive Mechanical Behavior of Coarse Grained and Ultrafine Grained Mg-Y-RE Alloy. AIP Conference Proceedings.
Heckman, A., Rovey, J. L., Chandrashekhara, K., Watkins, S. E., Mishra, R. S., Stutts, D. (2012). Ultrasonic underwater transmission of composite turbine blade structural health. SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. 83430O–83430O.
Jain, V., Yuan, W., Mishra, R., Gupta, snme= Gouthamafnms= Anil K, (2011). Directional Anisotropy in the Mechanical Behavior of Friction Stir Processed and Aged AZ91 Alloy. Materials Science Forum. 1517(702), 64.
Kapoor, R., De, P., Mishra, R. S. (2010). An analysis of strength and ductility of ultrafine grained Al alloys. Materials Science Forum. 633, 165–177.
Smith, C. B., Mohan, A., Mishra, R. S., Mahoney, M., Miles, M., Gillis, S. M., Cerveny, L. M., Opichka, G. (2010). Friction Stir Processing of Commercial Grade Marine Alloys to Enable Superplastic Forming. Key Engineering Materials. 433, 141–151.
Kapoor, R., De, P., Mishra, R. S. (2009). An Analysis of Strength and Ductility of Ultrafine Grained Al Alloys. Materials Science Forum. 864(633), 165.
Tipaji, P. K., Allada, V., Mishra, R. S. (2007). A cost model for the Metal Inert Gas (MIG) welding process. ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. 751–760.
Balasubramanian, N., Krishnamurthy, K., Mishra, R. S. (2007). Preliminary study of pressure drop and heat transfer through a friction stir channel. ASME 2007 International Mechanical Engineering Congress and Exposition. 933–939.
Ramadorai, U., Newkirk, J. W., Mishra, R. S. (2006). Modification of aluminum alloys to create in-situ surface composites. Surface Modification Technologies: Proceedings of the 19th International Conference on Surface Modification Technologies, August 1-3, 2005, Radisson Riverfront Hotel, St. Paul, Minnesota, USA. 22.
Schneider, D. A. (2006). Practical considerations for real-time business intelligence. International Workshop on Business Intelligence for the Real-Time Enterprise. 1–3.
Mahoney, M. W., Bingel, W. H., Sharma, S. R., Mishra, R. S. (2003). Microstructural modification and resultant properties of friction stir processed cast NiAl bronze. Materials Science Forum. 426, 2843–2848.
Ma, Z., Sharma, S. R., Mishra, R. S., Mahoney, M. W., others, (2003). Microstructural modification of cast aluminum alloys via friction stir processing. Materials Science Forum. 426(4), 2891–2896.
Heckman, A., Rovey, J. L., Chandrashekhara, K., Watkins, S. E., Mishra, R. S., Stutts, D. S. (2003). Mini-lab projects in the undergraduate classical controls course.
Ma, Z., Mishra, R. (2002). IS TRANSITION-BASED APPROACH BETTER FOR INTERPRETATION OF DISLOCATION CREEP MECHANISMS IN DISPERSION-STRENGTHENED MATERIALS?. Creep deformation: fundamentals and applications: proceedings of a symposium sponsored by the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) and the Powder Materials Committee of the Materials Processing and Manufacturing Division (MPMD) of TMS (The Minerals, Metals & Materials Society): held during the 2002 TMS Annual Meeting in Seattle, Washington, Feburary 17-21, 2002. 219.
Chen, W., Ferguson, D., Ferguson, H., Mishra, R. S., Jin, Z. (2001). Development of ultrafine grained materials using the MAXStrain® technology. Materials science forum. 357, 425–430.
Mishra, R. S., Mahoney, M. W. (2001). Friction stir processing: a new grain refinement technique to achieve high strain rate superplasticity in commercial alloys. Materials Science Forum. 357, 507–514.
Mishra, R. S. (2000). An evaluation of the applicability of theoretical models for elevated temperature plasticity to ultrafine grained materials. Ultrafine Grained Materials(as held at the 2000 TMS Annual Meeting). 421–426.
Mishra, R. S. (2000). Effects of microstructural scale on high temperature plasticity of dispersion strengthened materials and composites. Deformation, Processing, and Properties of Structural Materials: the Honorary Symposium for Professor Oleg D. Sherby as held at the 2000 TMS Annual Meeting. 277–285.
Wan, J., Gasch, M. J., Kuntz, J. D., Mishra, R. S., Mukherjee, A. K. (2000). Processing and properties of ceramic nanocomposites produced from polymer precursor pyrolysis, high pressure sintering and spark plasma sintering. MRS Proceedings. 634, B7–2.
Mishra, R. S., McFadden, S., Mukherjee, A. K. (1999). Analysis of tensile superplasticity in nanomaterials. Materials science forum. 304, 31–38.
McFadden, S., Mishra, R., Mukherjee, A. (1999). Recent Developments in Superplasticity. MRS Proceedings. 601, 153.
Valiev, R., Islamgaliev, R. K., Stolyarov, V., Mishra, R. S., Mukherjee, A. K. (1998). Processing and mechanical properties of nanocrystalline alloys prepared by severe plastic deformation. Materials science forum. 269, 969–974.
Valiev, R., Alexandrov, I. V., Chiou, W., Mishra, R. S., Mukherjee, A. K. (1997). Comparative structural studies of nanocrystalline materials processed by different techniques. Materials Science Forum. 235, 497–506.
Mishra, R., Mukherjee, A. (1997). ROLE OF DIFFUSIONAL RELAXATION IN FRACTURE OF DISPERSION. Recent Advances in Fracture: Proceedings of a Symposium Held at the Annual Meeting of The Minerals, Metals & Materials Society in Orlando, Florida, February 10-13, 1997. 285.
Mukherjee, A. K., Mishra, R. S., Bieler, T. R. (1997). Some critical aspects of high strain rate superplasticity. Materials Science Forum. 233, 217–234.
Mukherjee, A. K., Mishra, R. S. (1997). Superplasticity in intermetallics. Materials Science Forum. 243, 609–618.
Mishra, R. S., Mukherjee, A. K. (1997). The origin of high strain rate superplasticity. Materials Science Forum. 243, 315–320.
Mishra, R. S., West, D., Mukherjee, A. K. (1996). Flow behavior of partially dense nanocrystalline alumina. Materials Science Forum. 225, 611–616.
Mishra, R. S., Valiev, R., Mukherjee, A. K. (1996). Fully dense nanocrystalline nickel by severe plastic deformation consolidation. Materials Science Forum. 225, 605–610.
Grishaber, R., Mishra, R., Mukherjee, A. (1996). Mechanical Behavior and Constitutive Modeling During High Temperature Deformation of Al Laminated Metal Composites. MRS Proceedings. 434, 267.
Mishra, R. S., Lesher, C., Mukherjee, A. K. (1996). Nanocrystalline alumina by high pressure sintering. Materials Science Forum. 225, 617–622.
Froes, F., Hoo, N., Srisukhumbowomchai, N., Chen, X., Ovecoglu, M., EG, B., Senkov, O., Taylor, P., Dunford, D., Goodwin, P., others, (1996). Progress in the Synthesis of Lightweight Metals by Non-Equilibrium Processes. Processing and Fabrication of Advanced Materials V: Proceedings of a Symposium Sponsored by the Structural Materials Division (SMD), Structural Materials Committee of the Minerals, Metals & Materials Society (TMS), Held During Materials Week’96 October 6-10, 1996, Cincinnati, Ohio. 5, 3.
West, D. A., Mishra, R. S., Mukherjee, A. K. (1996). Rapid Consolidation of Nanophase Al 2 O 3 and an Al 2 O 3/Al 2 TiO 5 Composite. MRS Proceedings. 457, 347.
Valiev, R., Mishra, R. S., Mukherjee, A. (1996). The structure of ultra-fine grained nickel produced by severe plastic deformation: Matériaux à grains ultra-fins produits par hypercorroyage. Annales de chimie. 21(6-7), 399–405.
Pandey, A., Mishra, R., Mahajan, Y., Chaturvedi, M. (1995). Effect of different reinforcements on the creep behavior of aluminum matrix composites. Tenth International Conference on Composite Materials. II. Metal Matrix Composites. 637–644.
Bieler, T. R., Mishra, R. S., Mukherjee, A. K. (1994). The Role of Threshold Stresses and Incipient Melting in High Strain Rate Superplasticity. Materials Science Forum. 170, 65–70.
Mishra, R., Mukherjee, A. (1993). Recent Advances on Superplastic Metals and Metal Based Composites. PROCEEDINGS OF THE JAPAN INTERNATIONAL SAMPE SYMPOSIUM. 1, 864–864.
Gangireddy, S., Gwalani, B., Liu, K., Banerjee, R., Mishra, R. S. (2019). Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy (vol 734, pg 42, 2018). Other. 740, 14-15.
Hovanski, Y., Mishra, R. S., Sato, Y., Upadhyay, P., Yan, D. (2019). Preface. Minerals, Metals and Materials Series. v. https://api.elsevier.com/content/abstract/scopus_id/85064742357
Dhal, A., Thapliyal, S., Agrawal, P., Roy, A., Sharma, A., Mishra, R. S., Faierson, E. (2024). Multimodal and multiscale strengthening mechanisms in Al-Ni-Zr-Ti-Mn alloy processed by laser powder bed fusion additive manufacturing. Materials & Design. 237, .
Dahotre, N. B., Mishra, R., Banerjee, R. (2023). 6 Hierarchical phase evolution during direct laser deposition of an in-situ Ni-NbC composite. Scripta Materialia. 226, .
Gaddam, S., Nartu, Mohan Sai Kiran Kumar Yadav,, Chesetti, A., Mantri, S. A., Mishra, R. S., Dahotre, N. B., Banerjee, R. (2023). Hierarchical phase evolution during direct laser deposition of an in-situ Ni-NbC composite. Scripta Materialia. 226, 115225. Pergamon.
Sharma, A., Sankar Haridas, R., Agrawal, P., Gumaste, A., Scharf, T. W., Kandasamy, K., Mishra, R. S. Novel SolidStir extrusion technology for enhanced conductivity cable manufacturing via in-situ exfoliation of graphite to graphene. Other. 238, .
Jha, S., Mishra, R. S., Mukherjee, S. (2023). Phase-Specific Damage Tolerance of a Eutectic High Entropy Alloy. Entropy. 25(12), 1604. MDPI.
Sharma, A., Gumaste, A., Agrawal, P., Thapliyal, S., Gupta, S., Haridas, R. S., McWilliams, B. A., Cho, K. C., Mishra, R. S. Strength-conductivity synergy via lean alloy design: A study on novel solid stir extrusion of an Al-2Cu-0.1 Nb-0.15Zr (∼wt.%) alloy. Journal of Alloys and Compounds. 976, .
Gaddam, S., Haridas, R. S., Tammana, D., Sanabria, C., Lammi, C. J., Berman, D., Mishra, R. S. (2023). Double-sided friction stir welding of Nitronic-40 stainless steel for application in tokamak devices. Journal of Materials Science and Technology. 159, 170-183. https://api.elsevier.com/content/abstract/scopus_id/85152929933
Lopes, J. G., Agrawal, P., Shen, J., Schell, N., Mishra, R. S., Oliveira, J. P. (2023). Evolution of microstructure and mechanical properties in gas tungsten arc welded dual-phase Fe50Mn30Co10Cr10 high entropy alloy. Materials Science and Engineering: A. 878, .
Dhal, A., Sankar Haridas, R., Agrawal, P., Gupta, S., Mishra, R. S. (2023). Mapping hierarchical and heterogeneous micromechanics of a transformative high entropy alloy by nanoindentation and machine learning augmented clustering. Materials & Design. 230, .
Agrawal, P., Thapliyal, S., Agrawal, P., Dhal, A., Haridas, R. S., Gupta, S., Mishra, R. S. (2023). Additive manufacturing of a metastable high entropy alloy: Metastability engineered microstructural control via process variable driven elemental segregation. Materials Science and Engineering: A. 872, .
Agrawal, P., Gupta, S., Dhal, A., Prabhakaran, R., Shao, L., Mishra, R. S. (2023). Irradiation response of innovatively engineered metastable TRIP high entropy alloy. Journal of Nuclear Materials. 574, 154217. Elsevier BV.
Haridas, R. S., Agrawal, P., Thapliyal, S., Agrawal, P., Dhal, A., Shukla, S., Zhou, L., Sohn, Y., Mishra, R. S. (2023). Synergy of tensile strength and high cycle fatigue properties in a novel additively manufactured Al-Ni-Ti-Zr alloy with a heterogeneous microstructure. Additive Manufacturing. 62, 103380. Elsevier BV.
Gaddam, S., Haridas, R. S., Sanabria, C., Tammana, D., Berman, D., Mishra, R. S. (2022). Friction stir welding of SS 316 LN and Nitronic 50 jacket sections for application in superconducting fusion magnet systems. Materials & Design. 221, .
Hyer, H., Zhou, L., Park, S., Huynh, T., Mehta, A., Thapliyal, S., Mishra, R. S., Sohn, Y. (2022). Elimination of extraordinarily high cracking susceptibility of aluminum alloy fabricated by laser powder bed fusion. Journal of Materials Science and Technology. 103, 50-58. https://api.elsevier.com/content/abstract/scopus_id/85114815496
Polatidis, E., Shukla, S., Čapek, J., Van Petegem, S., Casati, N., Mishra, R. S. (2022). Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction. Other. 30, . https://api.elsevier.com/content/abstract/scopus_id/85123762344
Bhowmik, S., Zhang, J., Vogel, S. C., Nene, S. S., Mishra, R. S., McWilliams, B. A., Knezevic, M. (2022). Effects of plasticity-induced martensitic transformation and grain refinement on the evolution of microstructure and mechanical properties of a metastable high entropy alloy. Journal of Alloys and Compounds. 891, . https://api.elsevier.com/content/abstract/scopus_id/85115143452
Awasthi, P. D., Agrawal, P., Haridas, R. S., Mishra, R. S., Stawovy, M. T., Ohm, S., Imandoust, A. (2022). Mechanical properties and microstructural characteristics of additively manufactured C103 niobium alloy. Other. 831, . https://api.elsevier.com/content/abstract/scopus_id/85117399636
Jin, Y., Wang, T., Krokhin, A., Choi, T. Y., Mishra, R. S., Neogi, A. (2022). Ultrasonic elastography for nondestructive evaluation of dissimilar material joints. Journal of Materials Processing Technology. 299, . https://api.elsevier.com/content/abstract/scopus_id/85111331983
Muskeri, S., Gwalani, B., Jha, S., Yu, A., Jannotti, P. A., Haridas, R. S., Schuster, B. E., Lloyd, J. T., Mishra, R. S., Mukherjee, S. (2021). Excellent ballistic impact resistance of Al0. 3CoCrFeNi multi-principal element alloy with unique bimodal microstructure. Scientific Reports. 11(1), 1--12. Nature Publishing Group.
Gwalani, B., Dasari, S., Sharma, A., Soni, V., Shukla, S., Jagetia, A., Agrawal, P., Mishra, R. S., Banerjee, R. (2021). High density of strong yet deformable intermetallic nanorods leads to an excellent room temperature strength-ductility combination in a high entropy alloy. Acta Materialia. 219, 117234. Pergamon.
Choi, T., Jin, Y., Wang, T., Krokhin, A., Mishra, R., Neogi, A. (2021). Ultrasonic elastography for nondestructive evaluation of dissimilar material joints." Journal of Materials Processing Technology. Journal of Materials Processing Technology. 299, 117301.
Wang, T., Shukla, S., Gwalani, B., Sinha, S., Thapliyal, S., Frank, M., Mishra, R. S. (2021). Co-introduction of precipitate hardening and TRIP in a TWIP high-entropy alloy using friction stir alloying. Scientific Reports. 11(1), . https://api.elsevier.com/content/abstract/scopus_id/85099455223
Muskeri, S., Gwalani, B., Jha, S., Yu, A., Jannotti, P. A., Haridas, R. S., Schuster, B. E., Lloyd, J. T., Mishra, R. S., Mukherjee, S. (2021). Excellent ballistic impact resistance of Al<inf>0.3</inf>CoCrFeNi multi-principal element alloy with unique bimodal microstructure. Scientific Reports. 11(1), . https://api.elsevier.com/content/abstract/scopus_id/85119674894
Gupta, S., Agrawal, P., Nene, S. S., Mishra, R. S. (2021). Friction stir welding of γ-fcc dominated metastable high entropy alloy: Microstructural evolution and strength. Scripta Materialia. 204, . https://api.elsevier.com/content/abstract/scopus_id/85111301046
Agrawal, P., Haridas, R. S., Yadav, S., Thapliyal, S., Gaddam, S., Verma, R., Mishra, R. S. (2021). Processing-structure-property correlation in additive friction stir deposited Ti-6Al-4V alloy from recycled metal chips. Other. 47, . https://api.elsevier.com/content/abstract/scopus_id/85113314846
Thapliyal, S., Agrawal, P., Agrawal, P., Nene, S. S., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2021). Segregation engineering of grain boundaries of a metastable Fe-Mn-Co-Cr-Si high entropy alloy with laser-powder bed fusion additive manufacturing. Acta Materialia. 219, . https://api.elsevier.com/content/abstract/scopus_id/85114316641
Agrawal, P., Haridas, R. S., Thapliyal, S., Yadav, S., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2021). Metastable high entropy alloys: An excellent defect tolerant material for additive manufacturing. Other. 826, . https://api.elsevier.com/content/abstract/scopus_id/85114188211
Yadav, S., Zhang, Q., Behera, A., Haridas, R. S., Agrawal, P., Gong, J., Mishra, R. S. (2021). Role of binder phase on the microstructure and mechanical properties of a mechanically alloyed and spark plasma sintered WC-FCC HEA composites. Journal of Alloys and Compounds. 877, . https://api.elsevier.com/content/abstract/scopus_id/85105786653
Nene, S. S., Agrawal, P., Frank, M., Watts, A., Shukla, S., Morphew, C., Chesetti, A., Park, J. S., Mishra, R. S. (2021). Transformative high entropy alloy conquers the strength-ductility paradigm by massive interface strengthening. Scripta Materialia. 203, . https://api.elsevier.com/content/abstract/scopus_id/85109049549
Sittiho, A., Bhattacharyya, M., Graves, J., Nene, S. S., Mishra, R. S., Charit, I. (2021). Friction stir processing of a high entropy alloy Fe<inf>42</inf>Co<inf>10</inf>Cr<inf>15</inf>Mn<inf>28</inf>Si<inf>5</inf> with transformative characteristics: Microstructure and mechanical properties. Other. 28, . https://api.elsevier.com/content/abstract/scopus_id/85110445536
Frank, M., Nene, S. S., Chen, Y., Thapliyal, S., Shukla, S., Liu, K., Sinha, S., Wang, T., Frost, M. J., An, K., Mishra, R. S. (2021). Direct evidence of the stacking fault-mediated strain hardening phenomenon. Applied Physics Letters. 119(8), . https://api.elsevier.com/content/abstract/scopus_id/85114034058
Haridas, R. S., Agrawal, P., Mishra, R. S. (2021). Modeling the work hardening behavior in metastable high entropy alloys. Other. 823, . https://api.elsevier.com/content/abstract/scopus_id/85110471709
Mishra, R. S., Thapliyal, S. (2021). Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing. Other. 204, . https://api.elsevier.com/content/abstract/scopus_id/85102631749
Thapliyal, S., Shukla, S., Zhou, L., Hyer, H., Agrawal, P., Agrawal, P., Komarasamy, M., Sohn, Y., Mishra, R. S. (2021). Design of heterogeneous structured Al alloys with wide processing window for laser-powder bed fusion additive manufacturing. Other. 42, . https://api.elsevier.com/content/abstract/scopus_id/85105690096
Haridas, R. S., Agrawal, P., Thapliyal, S., Yadav, S., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2021). Strain rate sensitive microstructural evolution in a TRIP assisted high entropy alloy: Experiments, microstructure and modeling. Mechanics of Materials. 156, . https://api.elsevier.com/content/abstract/scopus_id/85101301612
Mishra, R. S., Nene, S. S. (2021). Some Unique Aspects of Mechanical Behavior of Metastable Transformative High Entropy Alloys. Other. 52(3), 889-896. https://api.elsevier.com/content/abstract/scopus_id/85100371977
Yu, H. Z., Mishra, R. S. (2021). Additive friction stir deposition: a deformation processing route to metal additive manufacturing. Materials Research Letters. 9(2), 71-83. https://api.elsevier.com/content/abstract/scopus_id/85096619285
Agrawal, P., Gupta, S., Thapliyal, S., Shukla, S., Haridas, R. S., Mishra, R. S. (2021). Additively manufactured novel Al-Cu-Sc-Zr alloy: Microstructure and mechanical properties. Other. 37, . https://api.elsevier.com/content/abstract/scopus_id/85095564889
Agrawal, P., Shukla, S., Thapliyal, S., Nene, S. S., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2021). Microstructure–Property Correlation in a Laser Powder Bed Fusion Processed High-Strength AF-9628 Steel. Advanced Engineering Materials. 23(1), . https://api.elsevier.com/content/abstract/scopus_id/85091017443
Muskeri, S., Choudhuri, D., Jannotti, P. A., Schuster, B. E., Lloyd, J. T., Mishra, R. S., Mukherjee, S. (2020). Ballistic Impact Response of Al0. 1CoCrFeNi High-Entropy Alloy. Advanced Engineering Materials. 22(6), 2000124.
Choudhuri, D., Srivilliputhur, S. G., Mishra, R. S. (2020). Deformation of lamellar FCC-B2 nanostructures containing Kurdjumov-Sachs interfaces: Relation between interfacial structure and plasticity. International Journal of Plasticity. 125, 191--209. Pergamon.
Gwalani, B., Wang, T., Jagetia, A., Gangireddy, S., Muskeri, S., Mukherjee, S., Lloyd, J. T., Banerjee, R., Mishra, R. S. (2020). Dynamic Shear Deformation of a Precipitation Hardened Al0. 7CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry. Other. 22(4), 431. Multidisciplinary Digital Publishing Institute.
Frank, M., Nene, S. S., Chen, Y., Gwalani, B., Kautz, E. J., Devaraj, A., An, K., Mishra, R. S. (2020). Correlating work hardening with co-activation of stacking fault strengthening and transformation in a high entropy alloy using in-situ neutron diffraction. Scientific Reports. 10(1), . https://api.elsevier.com/content/abstract/scopus_id/85097671058
Thapliyal, S., Nene, S. S., Agrawal, P., Wang, T., Morphew, C., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2020). Damage-tolerant, corrosion-resistant high entropy alloy with high strength and ductility by laser powder bed fusion additive manufacturing. Other. 36, . https://api.elsevier.com/content/abstract/scopus_id/85088239115
Agrawal, P., Shukla, S., Gupta, S., Mishra, R. S. (2020). Friction stir gradient alloying: A high-throughput method to explore the influence of V in enabling HCP to BCC transformation in a γ-FCC dominated high entropy alloy. Other. 21, . https://api.elsevier.com/content/abstract/scopus_id/85092418072
Mishra, R. S., Nene, S. S., Frank, M., Sinha, S., Liu, K., Shukla, S. (2020). Metastability driven hierarchical microstructural engineering: Overview of mechanical properties of metastable complex concentrated alloys. Journal of Alloys and Compounds. 842, . https://api.elsevier.com/content/abstract/scopus_id/85086875159
Haridas, R. S., Thapliyal, S., Agrawal, P., Mishra, R. S. (2020). Defect-based probabilistic fatigue life estimation model for an additively manufactured aluminum alloy. Other. 798, . https://api.elsevier.com/content/abstract/scopus_id/85090053155
Liu, K., Nene, S. S., Frank, M., Mishra, R. S. (2020). Effect of Strain Rate on Deformation Response of Metastable High Entropy Alloys Upon Friction Stir Processing. Other. 51(10), 5043-5048. https://api.elsevier.com/content/abstract/scopus_id/85088700219
Nene, S. S., Frank, M., Agrawal, P., Sinha, S., Liu, K., Shukla, S., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2020). Microstructurally flexible high entropy alloys: Linkages between alloy design and deformation behavior. Other. 194, . https://api.elsevier.com/content/abstract/scopus_id/85088122606
Muskeri, S., Choudhuri, D., Jannotti, P. A., Schuster, B. E., Lloyd, J. T., Mishra, R. S., Mukherjee, S. (2020). Ballistic Impact Response of Al<inf>0.1</inf>CoCrFeNi High-Entropy Alloy. Advanced Engineering Materials. 22(6), . https://api.elsevier.com/content/abstract/scopus_id/85083827899
Nene, S. S., Gupta, S., Morphew, C., Mishra, R. S. (2020). Friction stir butt welding of a high strength Al-7050 alloy with a metastable transformative high entropy alloy. Materialia. 11, . https://api.elsevier.com/content/abstract/scopus_id/85085606122
Shukla, S., Wang, T., Frank, M., Agrawal, P., Sinha, S., Mirshams, R. A., Mishra, R. S. (2020). Friction stir gradient alloying: A novel solid-state high throughput screening technique for high entropy alloys. Other. 23, . https://api.elsevier.com/content/abstract/scopus_id/85077132298
Frank, M., Chen, Y., Nene, S. S., Sinha, S., Liu, K., An, K., Mishra, R. S. (2020). Investigating the deformation mechanisms of a highly metastable high entropy alloy using in-situ neutron diffraction. Other. 23, . https://api.elsevier.com/content/abstract/scopus_id/85077506477
Zhou, L., Hyer, H., Thapliyal, S., Mishra, R. S., McWilliams, B., Cho, K., Sohn, Y. (2020). Process-Dependent Composition, Microstructure, and Printability of Al-Zn-Mg and Al-Zn-Mg-Sc-Zr Alloys Manufactured by Laser Powder Bed Fusion. Other. 51(6), 3215-3227. https://api.elsevier.com/content/abstract/scopus_id/85084089917
Nelaturu, P., Jana, S., Mishra, R. S., Grant, G., Carlson, B. E. (2020). Effect of temperature on the fatigue cracking mechanisms in A356 Al alloy. Other. 780, . https://api.elsevier.com/content/abstract/scopus_id/85080144323
Panigrahi, S. K., Mishra, R. S., Brennan, R. C., Cho, K. (2020). Achieving extraordinary structural efficiency in a wrought magnesium rare earth alloy. Materials Research Letters. 8(4), 151-157. https://api.elsevier.com/content/abstract/scopus_id/85079454172
Wang, T., Sinha, S., Komarasamy, M., Shukla, S., Williams, S., Mishra, R. S. (2020). Ultrasonic spot welding of dissimilar Al 6022 and Al 7075 alloys. Journal of Materials Processing Technology. 278, . https://api.elsevier.com/content/abstract/scopus_id/85073748077
Shukla, S., Mishra, R. S. (2020). Excellent high cyclic fatigue properties of a novel ultrafine-grained medium entropy alloy. Other. 779, . https://api.elsevier.com/content/abstract/scopus_id/85079693932
Thapliyal, S., Komarasamy, M., Shukla, S., Zhou, L., Hyer, H., Park, S., Sohn, Y., Mishra, R. S. (2020). An integrated computational materials engineering-anchored closed-loop method for design of aluminum alloys for additive manufacturing. Other. 9, . https://api.elsevier.com/content/abstract/scopus_id/85077306309
Agrawal, P., Thapliyal, S., Nene, S. S., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2020). Excellent strength-ductility synergy in metastable high entropy alloy by laser powder bed additive manufacturing. Other. 32, . https://api.elsevier.com/content/abstract/scopus_id/85078775875
Nene, S. S., Liu, K., Sinha, S., Frank, M., Williams, S., Mishra, R. S. (2020). Superplasticity in fine grained dual phase high entropy alloy. Other. 9, . https://api.elsevier.com/content/abstract/scopus_id/85074713920
Sinha, S., Komarasamy, M., Wang, T., Haridas, R. S., Agrawal, P., Shukla, S., Thapliyal, S., Frank, M., Mishra, R. S. (2020). Notch-tensile behavior of Al<inf>0.1</inf>CrFeCoNi high entropy alloy. Other. 774, . https://api.elsevier.com/content/abstract/scopus_id/85077446132
Sinha, S., Nene, S. S., Frank, M., Liu, K., Lebensohn, R. A., Mishra, R. S. (2020). Deformation mechanisms and ductile fracture characteristics of a friction stir processed transformative high entropy alloy. Acta Materialia. 184, 164-178. https://api.elsevier.com/content/abstract/scopus_id/85075912053
Balachandran, S., Mishra, R. S., Banerjee, D. (2020). Friction stir processing of a metastable β titanium alloy in β and α+β phase fields. Other. 772, . https://api.elsevier.com/content/abstract/scopus_id/85075886076
Gwalani, B., Choudhuri, D., Liu, K., Lloyd, J. T., Mishra, R. S., Banerjee, R. (2020). Interplay between single phase solid solution strengthening and multi-phase strengthening in the same high entropy alloy. Other. 771, . https://api.elsevier.com/content/abstract/scopus_id/85075466714
Argade, G. R., Panigrahi, S. K., Mishra, R. S. (2020). Aging response on the stress corrosion cracking behavior of wrought precipitation-hardened magnesium alloy. Journal of Materials Science. 55(3), 1216-1230. https://api.elsevier.com/content/abstract/scopus_id/85072218122
Dutt, A. K., Gwalani, B., Tungala, V., Carl, M., Mishra, R. S., Tamirisakandala, S. A., Young, M. L., Cho, K. C., Brennan, R. E. (2019). A novel nano-particle strengthened titanium alloy with exceptional specific strength. Scientific Reports. 9, .
Choudhuri, D., Jannotti, P. A., Muskeri, S., Shukla, S., Gangireddy, S., Mukherjee, S., Schuster, B. E., Lloyd, J. T., Mishra, R. S. (2019). Ballistic Response of a FCC-B2 Eutectic AlCoCrFeNi 2.1 High Entropy Alloy. Other. 5(4), 495--503. Springer International Publishing.
Choudhuri, D., Shukla, S., Jannotti, P. A., Muskeri, S., Mukherjee, S., Lloyd, J. T., Mishra, R. S. (2019). Characterization of as-cast microstructural heterogeneities and damage mechanisms in eutectic AlCoCrFeNi2. 1 high entropy alloy. Materials Characterization. 158, 109955. Elsevier.
Gwalani, B., Gangireddy, S., Shukla, S., Yannetta, C. J., Valentin, S. G., Mishra, R. S., Banerjee, R. (2019). Compositionally graded high entropy alloy with a strong front and ductile back. Other. 20, .
Gwalani, B., Gangireddy, S., Shukla, S., Yannetta, C. J., Valentin, S. G., Mishra, R. S., Banerjee, R. (2019). Compositionally graded high entropy alloy with a strong front and ductile back. Other. 20, 100602. Elsevier.
Gangireddy, S., Gwalani, B., Soni, V., Banerjee, R., Mishra, R. S. (2019). Contrasting mechanical behavior in precipitation hardenable AlxCoCrFeNi high entropy alloy microstructures: Single phase FCC vs. dual phase FCC-BCC. Other. 739, 158-166.
Argade, G. R., Sanders, S., Mohandass, G., Alsaleh, A., D'Souza, F., Golden, T. D., Mishra, R. S. (2019). Corrosion Inhibition Study of Mg-Nd-Y High Strength Magnesium Alloy Using Organic Inhibitor. Journal of Materials Engineering and Performance. 28, 852-862.
Choudhuri, D., Shukla, S., Gwalani, B., Banerjee, R., Mishra, R. S. (2019). Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy. Materials Research Letters. 7(1), 40-46.
Choudhuri, D., Shukla, S., Gwalani, B., Banerjee, R., Mishra, R. S. (2019). Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy. Materials Research Letters. 7(1), 40--46. Taylor \& Francis.
Choudhuri, D., Gwalani, B., Gorsse, S., Komarasamy, M., Mantri, S. A., Srivilliputhur, S. G., Mishra, R. S., Banerjee, R. (2019). Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds. Acta Materialia. 165, 420-430. Elsevier.
Gwalani, B., Gangireddy, S., Zheng, Y., Soni, V., Mishra, R. S., Banerjee, R. (2019). Influence of ordered L1 2 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy. Scientific Reports. 9(1), 1--13. Nature Publishing Group.
Gwalani, B., Gangireddy, S., Zheng, Y., Soni, V., Mishra, R. S., Banerjee, R. (2019). Influence of ordered L1(2) precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy. Scientific Reports. 9, .
Sinha, S., Mirshams, R. A., Wang, T., Frank, M., Mishra, R. S., Lloyd, J. T., (2019). Nanoindentation behavior of high entropy alloys with transformation induced plasticity. Scientific Reports. 9(1), 6639. Nature Publishing Group. https://www.nature.com/articles/s41598-019-43174-x
Gwalani, B., Gorsse, S., Soni, V., Carl, M., Ley, N., Smith, J., Ayyagari, A. V., Zheng, Y., Young, M. L., Mishra, R. S., Banerjee, R. (2019). Role of copper on L12 precipitation strengthened fcc based high entropy alloy. Other. 6, 100282. http://www.sciencedirect.com/science/article/pii/S258915291930078X
Gwalani, B., Gorsse, S., Choudhuri, D., Zheng, Y., Mishra, R. S., Banerjee, R. (2019). Tensile yield strength of a single bulk Al0. 3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa. Scripta Materialia. 162, 18--23. Pergamon.
Gwalani, B., Gorsse, S., Choudhuri, D., Zheng, Y., Mishra, R. S., Banerjee, R. (2019). Tensile yield strength of a single bulk Al0.3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa. Scripta Materialia. 162, 18-23.
Argade, G. R., Joshi, S. S., Ayyagari, A. V., Mukherjee, S., Mishra, R. S., Dahotre, N. B. (2019). Tribocorrosion performance of laser additively processed high-entropy alloy coatings on aluminum. Applied Physics A. 125(4), 1--9. Springer Berlin Heidelberg.
Argade, G. R., Joshi, S. S., Ayyagari, A. V., Mukherjee, S., Mishra, R. S., Dahotre, N. B. (2019). Tribocorrosion performance of laser additively processed high-entropy alloy coatings on aluminum. Applied Physics A. 125(4), 1--9. Springer.
Choudhuri, D., Jannotti, P. A., Muskeri, S., Shukla, S., Gangireddy, S., Mukherjee, S., Schuster, B. E., Lloyd, J. T., Mishra, R. S. (2019). Ballistic Response of a FCC-B2 Eutectic AlCoCrFeNi<inf>2.1</inf> High Entropy Alloy. Other. 5(4), 495-503. https://api.elsevier.com/content/abstract/scopus_id/85070769678
Choudhuri, D., Shukla, S., Jannotti, P. A., Muskeri, S., Mukherjee, S., Lloyd, J. T., Mishra, R. S. (2019). Characterization of as-cast microstructural heterogeneities and damage mechanisms in eutectic AlCoCrFeNi<inf>2.1</inf> high entropy alloy. Materials Characterization. 158, . https://api.elsevier.com/content/abstract/scopus_id/85073112358
Sinha, S., Nene, S. S., Frank, M., Liu, K., Agrawal, P., Mishra, R. S. (2019). On the evolving nature of c/a ratio in a hexagonal close-packed epsilon martensite phase in transformative high entropy alloys. Scientific Reports. 9(1), . https://api.elsevier.com/content/abstract/scopus_id/85072150900
Pathak, S., Kumar, N., Mishra, R. S., De, P. S. (2019). Aqueous Corrosion Behavior of Cast CoCrFeMnNi Alloy. Journal of Materials Engineering and Performance. 28(10), 5970-5977. https://api.elsevier.com/content/abstract/scopus_id/85074164212
Tungala, V., Dutt, A. K., Choudhuri, D., Mishra, R. S., Tamirisakandala, S. A., Cho, K. C., Brennan, R. E. (2019). Friction Stir Processing of Beta C and Ti-185: A Unique Pathway to Engineer Microstructures for Exceptional Properties in β Titanium Alloys. Other. 50(9), 4075-4084. https://api.elsevier.com/content/abstract/scopus_id/85068798313
Wang, T., Gwalani, B., Shukla, S., Frank, M., Mishra, R. S. (2019). Development of in situ composites via reactive friction stir processing of Ti–B<inf>4</inf>C system. Composites Part B: Engineering. 172, 54-60. https://api.elsevier.com/content/abstract/scopus_id/85066111154
Komarasamy, M., Shukla, S., Williams, S., Kandasamy, K., Kelly, S., Mishra, R. S. (2019). Microstructure, fatigue, and impact toughness properties of additively manufactured nickel alloy 718. Other. 28, 661-675. https://api.elsevier.com/content/abstract/scopus_id/85067450565
Wang, T., Sidhar, H., Mishra, R. S., Hovanski, Y., Upadhyay, P., Carlson, B. (2019). Evaluation of intermetallic compound layer at aluminum/steel interface joined by friction stir scribe technology. Other. 174, . https://api.elsevier.com/content/abstract/scopus_id/85064347023
Liu, K., Gwalani, B., Komarasamy, M., Shukla, S., Wang, T., Mishra, R. S. (2019). Effect of nano-sized precipitates on the fatigue property of a lamellar structured high entropy alloy. Other. 760, 225-230. https://api.elsevier.com/content/abstract/scopus_id/85066795660
Nene, S. S., Frank, M., Liu, K., Sinha, S., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2019). Corrosion-resistant high entropy alloy with high strength and ductility. Scripta Materialia. 166, 168-172. https://api.elsevier.com/content/abstract/scopus_id/85063544028
Liu, K., Nene, S. S., Frank, M., Sinha, S., Mishra, R. S. (2019). Extremely high fatigue resistance in an ultrafine grained high entropy alloy. Other. 15, 525-530. https://api.elsevier.com/content/abstract/scopus_id/85064313386
Sinha, S., Nene, S. S., Frank, M., Liu, K., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2019). Revealing the microstructural evolution in a high entropy alloy enabled with transformation, twinning and precipitation. Other. 6, . https://api.elsevier.com/content/abstract/scopus_id/85064246894
Gwalani, B., Gorsse, S., Soni, V., Carl, M., Ley, N., Smith, J., Ayyagari, A. V., Zheng, Y., Young, M. L., Mishra, R. S., Banerjee, R. (2019). Role of copper on L1 <inf>2</inf> precipitation strengthened fcc based high entropy alloy. Other. 6, . https://api.elsevier.com/content/abstract/scopus_id/85063090869
Pandya, S., Mishra, R. S., Arora, A. (2019). Channel formation during friction stir channeling process — A material flow study using X-Ray micro-computed tomography and optical microscopy. Journal of Manufacturing Processes. 41, 48-55. https://api.elsevier.com/content/abstract/scopus_id/85063473674
Sinha, S., Komarasamy, M., Thapliyal, S., Gwalani, B., Shukla, S., Darling, K. A., Mishra, R. S. (2019). Immiscible nanostructured copper-aluminum-niobium alloy with excellent precipitation strengthening upon friction stir processing and aging. Scripta Materialia. 164, 42-47. https://api.elsevier.com/content/abstract/scopus_id/85060513716
Dahotre, N., Mishra, R. S. (2019). Tribocorrosion Performance of Laser Additively Processed High Entropy Alloy Coatings on Aluminum. 125(4), 272.
Komarasamy, M., Wang, T., Liu, K., Reza-Nieto, L., Mishra, R. S. (2019). Hierarchical multi-phase microstructural architecture for exceptional strength-ductility combination in a complex concentrated alloy via high-temperature severe plastic deformation. Scripta Materialia. 162, 38-43. https://api.elsevier.com/content/abstract/scopus_id/85055667824
Gangireddy, S., Whitaker, D., Mishra, R. S. (2019). Significant Contribution to Strength Enhancement from Deformation Twins in Thermomechanically Processed Al <inf>0.1</inf> CoCrFeNi Microstructures. Journal of Materials Engineering and Performance. 28(3), 1661-1667. https://api.elsevier.com/content/abstract/scopus_id/85060852537
Wang, T., Shukla, S., Gwalani, B., Komarasamy, M., Reza-Nieto, L., Mishra, R. S. (2019). Effect of reactive alloy elements on friction stir welded butt joints of metallurgically immiscible magnesium alloys and steel. Journal of Manufacturing Processes. 39, 138-145. https://api.elsevier.com/content/abstract/scopus_id/85061983842
Komarasamy, M., Shukla, S., Williams, S., Kandasamy, K., Kelly, S., Mishra, R. S. (2019). Exceptional fatigue resistance and impact toughness of additively manufactured nickel alloy 625 by laser-beam powder-bed-fusion. Other. 55(2), 65-78. https://api.elsevier.com/content/abstract/scopus_id/85075234299
Gangireddy, S., Gwalani, B., Liu, K., Faierson, E. J., Mishra, R. S. (2019). Microstructure and mechanical behavior of an additive manufactured (AM) WE43-Mg alloy. Other. 26, 53-64. https://api.elsevier.com/content/abstract/scopus_id/85059750865
Wang, T., Sidhar, H., Mishra, R. S., Hovanski, Y., Upadhyay, P., Carlson, B. (2019). Effect of hook characteristics on the fracture behaviour of dissimilar friction stir welded aluminium alloy and mild steel sheets. Other. 24(2), 178-184. https://api.elsevier.com/content/abstract/scopus_id/85052099783
Wang, T., Shukla, S., Frank, M., Mishra, R. S. (2019). Evolution of bond formation and fracture process of ultrasonic spot welded dissimilar materials. Other. 24(2), 171-177. https://api.elsevier.com/content/abstract/scopus_id/85050257241
Gangireddy, S., Komarasamy, M., Faierson, E. J., Mishra, R. S. (2019). High strain rate mechanical behavior of Ti-6Al-4V octet lattice structures additively manufactured by selective laser melting (SLM). Other. 745, 231-239. https://api.elsevier.com/content/abstract/scopus_id/85059243162
Wang, T., Shukla, S., Komarasamy, M., Liu, K., Mishra, R. S. (2019). Towards heterogeneous Al<inf>x</inf>CoCrFeNi high entropy alloy via friction stir processing. Materials Letters. 236, 472-475. https://api.elsevier.com/content/abstract/scopus_id/85055741002
Jalbuena, A. A., Ury, N., Bae, J., Faraj, C., Hanan, K., Kasnakjian, S., Logier, J. K., Mishra, R. S., Wang, X., Earthman, J. C., Ravi, V. (2019). Corrosion of Al<inf>0.1</inf>CoCrFeNi high entropy alloy in a molten eutectic salt. Journal of the Electrochemical Society. 166(11), C3488-C3492. https://api.elsevier.com/content/abstract/scopus_id/85073438406
Choudhuri, D., Srinivasan, S. G., Mishra, R. S. (2019). Deformation of lamellar FCC-B2 nanostructures containing Kurdjumov-Sachs interfaces: Relation between interfacial structure and plasticity. International Journal of Plasticity. https://api.elsevier.com/content/abstract/scopus_id/85074030995
Liu, K., Komarasamy, M., Gwalani, B., Shukla, S., Mishra, R. S. (2019). Fatigue behavior of ultrafine grained triplex Al<inf>0.3</inf>CoCrFeNi high entropy alloy. Scripta Materialia. 158, 116-120. https://api.elsevier.com/content/abstract/scopus_id/85052893095
Sinha, S., Nene, S. S., Frank, M., Liu, K., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2019). Microstructural Evolution and Deformation Behavior of Ni-Si- and Co-Si-Containing Metastable High Entropy Alloys. Other. 50(1), 179-190. https://api.elsevier.com/content/abstract/scopus_id/85055514746
Komarasamy, M., Shukla, S., Ley, N., Liu, K., Cho, K., McWilliams, B., Brennan, R., Young, M. L., Mishra, R. S. (2018). A novel method to enhance CSL fraction, tensile properties and work hardening in complex concentrated alloys - Lattice distortion effect. Other. 736, 383-391.
Palanivel, S., Mishra, R., Brennan, R., Cho, K. (2018). Accelerated age hardening response by in-situ ultrasonic aging of a WE43 alloy. Materials and Manufacturing Processes. 33(1), 104--108. Taylor \& Francis.
Komarasamy, M., Alagarsamy, K., Ely, L., Mishra, R. S. (2018). Characterization of 3ʺ through-thickness friction stir welded 7050-T7451 Al alloy. Materials Science and Engineering: A. Elsevier.
Wang, T., Sidhar, H., Mishra, R. S., Hovanski, Y., Upadhyay, P., Carlson, B. (2018). Friction stir scribe welding technique for dissimilar joining of aluminium and galvanised steel. Other. 23(3), 249--255. Taylor \& Francis.
Shukla, S., Komarasamy, M., Mishra, R. S. (2018). Grain size dependence of fatigue properties of friction stir processed ultrafine-grained Al-5024 alloy. International Journal of Fatigue. 109, 1--9. Elsevier.
Nelaturu, P., Jana, S., Mishra, R. S., Grant, G., Carlson, B. E. (2018). Influence of friction stir processing on the room temperature fatigue cracking mechanisms of A356 aluminum alloy. Materials Science and Engineering: A. Elsevier.
Tungala, V., Arora, A., Gwalani, B., Mishra, R. S., Brennan, R. E., Cho, K. C. (2018). Microstructure and mechanical properties of friction stir processed cast Eglin steel (ES-1). Materials Science and Engineering: A. 709, 105--114. Elsevier.
Gangireddy, S., Gwalani, B., Liu, K., Banerjee, R., Mishra, R. S. (2018). Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy. Other. 734, 42-50.
Gwalani, B., Gorsse, S., Choudhuri, D., Styles, M., Zheng, Y., Mishra, R. S., Banerjee, R. (2018). Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing. Acta Materialia. 153, 169-185.
Mridha, S., Komarasamy, M., Bhowmick, S., Mishra, R. S., Mukherjee, S. (2018). Small-scale plastic deformation of nanocrystalline high entropy alloy. Other. 20(11), 889. Multidisciplinary Digital Publishing Institute.
Mishra, R. S. (2018). Extremely high strength and work hardening ability in a metastable high entropy alloy. Scientific Reports. 8(1), . https://api.elsevier.com/content/abstract/scopus_id/85049390827
Nene, S. S., Sinha, S., Frank, M., Liu, K., Mishra, R. S., McWilliams, B. A., Cho, K. C. (2018). Unexpected strength–ductility response in an annealed, metastable, high-entropy alloy. Other. 13, 198-206. https://api.elsevier.com/content/abstract/scopus_id/85053788251
Mishra, R. S. (2018). Towards attaining dissimilar lap joint of CuCrZr alloy and 316L stainless steel using friction stir welding. Other. 23(8), 715-720. https://api.elsevier.com/content/abstract/scopus_id/85050557458
Mishra, R. S. (2018). Friction stir butt welding of strain-hardened aluminum alloy with high strength steel. Other. 737, 85-89. https://api.elsevier.com/content/abstract/scopus_id/85053398537
Mishra, R. S. (2018). Metastability-assisted fatigue behavior in a friction stir processed dual-phase high entropy alloy. Materials Research Letters. 6(11), 613-619. https://api.elsevier.com/content/abstract/scopus_id/85053877769
Mishra, R. S. (2018). Hierarchical microstructure for improved fatigue properties in a eutectic high entropy alloy. Scripta Materialia. 156, 105-109. https://api.elsevier.com/content/abstract/scopus_id/85050164156
Mishra, R. S. (2018). Simultaneous enhancement of strength and ductility in an AlCoCrFeNi<inf>2.1</inf> eutectic high-entropy alloy via friction stir processing. Journal of Alloys and Compounds. 766, 312-317. https://api.elsevier.com/content/abstract/scopus_id/85049432302
Mishra, R. S. (2018). Grain size dependence of strain rate sensitivity in a single phase FCC high entropy alloy Al<inf>0.3</inf>CoCrFeNi. Other. 736, 344-348. https://api.elsevier.com/content/abstract/scopus_id/85053082523
Mishra, R. S. (2018). Microstructure, mechanical properties and strengthening mechanisms of friction stir welded Kanthal APMT™ steel. Journal of Nuclear Materials. 509, 435-444. https://api.elsevier.com/content/abstract/scopus_id/85049825931
Mishra, R. S. (2018). Investigation of plastic deformation modes in Al<inf>0.1</inf>CoCrFeNi high entropy alloy. Materials Chemistry and Physics. 217, 308-314. https://api.elsevier.com/content/abstract/scopus_id/85053056996
Mishra, R. S. (2018). Friction stir lap welding of stainless steel and plain carbon steel to enhance corrosion properties. Journal of Materials Processing Technology. 259, 259-269. https://api.elsevier.com/content/abstract/scopus_id/85046766139
Mishra, R. S. (2018). Reversed strength-ductility relationship in microstructurally flexible high entropy alloy. Scripta Materialia. 154, 163-167. https://api.elsevier.com/content/abstract/scopus_id/85047799625
Mishra, R. S. (2018). Towards Obtaining Sound Butt Joint Between Metallurgically Immiscible Pure Cu and Stainless Steel Through Friction Stir Welding. Other. 49(7), 2578-2582. https://api.elsevier.com/content/abstract/scopus_id/85046496062
Mishra, R. S. (2018). Friction stir processing of newly-designed Mg-5Al-3.5Ca-1Mn (AXM541) alloy: Microstructure evolution and mechanical properties. Other. 729, 294-299. https://api.elsevier.com/content/abstract/scopus_id/85047472406
Mishra, R. S. (2018). Microstructural dependence of strain rate sensitivity in thermomechanically processed Al<inf>0.1</inf>CoCrFeNi high entropy alloy. Other. 727, 148-159. https://api.elsevier.com/content/abstract/scopus_id/85046625533
Mishra, R. S. (2018). Microstructural comparison of friction-stir-welded aluminum alloy 7449 starting from different tempers. Journal of Materials Science. 53(12), 9273-9286. https://api.elsevier.com/content/abstract/scopus_id/85043400477
Mishra, R. S. (2018). Thermo-mechanical response of single-phase face-centered-cubic Al<inf>x</inf>CoCrFeNi high-entropy alloy microcrystals. Materials Research Letters. 6(5), 300-306. https://api.elsevier.com/content/abstract/scopus_id/85043986145
Mishra, R. S. (2018). Friction stir scribe welding technique for dissimilar joining of aluminium and galvanised steel. Other. 23(3), 249-255. https://api.elsevier.com/content/abstract/scopus_id/85030557329
Mishra, R. S. (2018). Grain size dependence of fatigue properties of friction stir processed ultrafine-grained Al-5024 alloy. International Journal of Fatigue. 109, 1-9. https://api.elsevier.com/content/abstract/scopus_id/85038216367
Choudhuri, D., Shukla, S., Green, W. B., Gwalani, B., Ageh, V., Banerjee, R., Mishra, R. S. (2018). Crystallographically degenerate B2 precipitation in a plastically deformed fcc-based complex concentrated alloy. Materials Research Letters. 6(3), 171-177. Informa UK Limited. http://dx.doi.org/10.1080/21663831.2018.1426649
Mishra, R. S. (2018). Characterization of 3″ through-thickness friction stir welded 7050-T7451 Al alloy. Other. 716, 55-62. https://api.elsevier.com/content/abstract/scopus_id/85041478833
Mishra, R. S. (2018). Influence of friction stir processing on the room temperature fatigue cracking mechanisms of A356 aluminum alloy. Other. 716, 165-178. https://api.elsevier.com/content/abstract/scopus_id/85041467444
Mishra, R. S. (2018). Accelerated age hardening response by in-situ ultrasonic aging of a WE43 alloy. Materials and Manufacturing Processes. 33(1), 104-108. https://api.elsevier.com/content/abstract/scopus_id/84999750732
Mishra, R. S. (2018). Microstructure and mechanical properties of friction stir processed cast Eglin steel (ES-1). Other. 709, 105-114. https://api.elsevier.com/content/abstract/scopus_id/85031787425
Mishra, R. S. (2018). Aging response on the stress corrosion cracking behavior of wrought precipitation hardened magnesium alloy. Other. 21, . https://api.elsevier.com/content/abstract/scopus_id/85055659825
Mishra, R. S. (2018). Effect of friction stir processed microstructure on tensile properties of an Al-Zn-Mg-Sc alloy upon subsequent aging heat treatment. Journal of Materials Science and Technology. 34(1), 214-218. https://api.elsevier.com/content/abstract/scopus_id/85034222130
Yin, Q., Wang, Z., Mishra, R. S., Xia, Z. (2017). Atomic simulations of twist grain boundary structures and deformation behaviors in aluminum. AIP Advances. 7(1), 015040. AIP Publishing.
Palanivel, S., Mishra, R. S. (2017). Building without melting: a short review of friction-based additive manufacturing techniques. International Journal of Additive and Subtractive Materials Manufacturing. 1(1), 82–103. Inderscience Publishers (IEL).
Das, S., Martinez, N. Y., Mishra, R. S., Grant, G. J., Jana, S. (2017). Control of Reaction Kinetics During Friction Stir Processing. Metallurgical and Materials Transactions A. 1–5. Springer US.
Charit, I., Mishra, R. S. (2017). Effect of friction stir processed microstructure on tensile properties of an Al-Zn-Mg-Sc alloy upon subsequent aging heat treatment. Journal of Materials Science & Technology. Elsevier.
Martinez, N., Kumar, N., Mishra, R., Doherty, K. (2017). Effect of tool dimensions and parameters on the microstructure of friction stir welded aluminum 7449 alloy of various thicknesses. Materials Science and Engineering: A. 684, 470–479. Elsevier.
Nene, S., Liu, K., Frank, M., Mishra, R., Brennan, R., Cho, K., Li, Z., Raabe, D. (2017). Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy. Scientific Reports. 7(1), 16167. Nature Publishing Group.
Sidhar, H., Mishra, R. S., Reynolds, A. P., Baumann, J. A. (2017). Impact of thermal management on post weld heat treatment efficacy in friction stir welded 2050-T3 alloy. Journal of Alloys and Compounds. 722, 330--338. Elsevier.
Martinez, N., Kumar, N., Mishra, R., Doherty, K. (2017). Microstructural variation due to heat gradient of a thick friction stir welded aluminum 7449 alloy. Journal of Alloys and Compounds. 713, 51--63. Elsevier.
Komarasamy, M., Alagarsamy, K., Mishra, R. S. (2017). Serration behavior and negative strain rate sensitivity of Al 0.1 CoCrFeNi high entropy alloy. Intermetallics. 84, 20–24. Elsevier.
Komarasamy, M., Alagarsamy, K., Mishra, R. S. (2017). Serration behavior and negative strain rate sensitivity of Al0. 1CoCrFeNi high entropy alloy. Intermetallics. 84, 20--24. Elsevier.
Kumar, N., Fusco, M., Komarasamy, M., Mishra, R., Bourham, M., Murty, K. (2017). Understanding effect of 3.5 wt.\% NaCl on the corrosion of Al0. 1CoCrFeNi high-entropy alloy. Journal of Nuclear Materials. 495, 154--163. North-Holland.
Palanivel, S., Arora, A., Doherty, K., Mishra, R. (2016). A framework for shear driven dissolution of thermally stable particles during friction stir welding and processing. Materials Science and Engineering: A. 678, 308–314. Elsevier.
Palanivel, S., Mishra, R., Brennan, R., Cho, K. (2016). Accelerated age hardening response by in-situ ultrasonic aging of a WE43 alloy. Materials and Manufacturing Processes. 1–5. Taylor & Francis.
Carpenter, J. S., Beese, A. M., Bourell, D. L., Hamilton, R. F., Herderick, E., Mishra, R. S., Sears, J. (2016). Additive Manufacturing: Building the Pathway Towards Process and Material Qualification. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science. 47(LA-UR–16-22717), . Los Alamos National Lab.(LANL), Los Alamos, NM (United States).
Sidhar, H., Mishra, R. S. (2016). Aging kinetics of friction stir welded Al-Cu-Li-Mg-Ag and Al-Cu-Li-Mg alloys. Materials & Design. 110, 60–71. Elsevier.
Komarasamy, M., Kumar, N., Mishra, R. S., Liaw, P. K. (2016). Anomalies in the deformation mechanism and kinetics of coarse-grained high entropy alloy. Materials Science and Engineering: A. 654, 256–263. Elsevier.
Kumar, N., Mishra, R., Dahotre, N., Brennan, R., Doherty, K., Cho, K. (2016). Effect of friction stir processing on microstructure and mechanical properties of laser-processed Mg 4Y 3Nd alloy. Materials & Design. 110, 663–675. Elsevier.
Dahotre, N. B., Mishra, R. S., (2016). Effect of friction stir processing on microstructure and mechanical properties of laser-processed Mg-4Y-3Nd alloy. 110, 663-675.
Lipscomb, C. A., Fortier, A., Kong, F., Das, S., Kumar, N., Mishra, R. S. (2016). Evaluation of plastic zone development in WE43 magnesium alloy upon friction stir processing using finite element modeling. Materials Science and Engineering: A. 673, 178–184. Elsevier.
Darling, K., Rajagopalan, M., Komarasamy, M., Bhatia, M., Hornbuckle, B., Mishra, R., Solanki, K. (2016). Extreme creep resistance in a microstructurally stable nanocrystalline alloy. Nature. 537(7620), 378–381. Nature Research.
Tinubu, O. O., Das, S., Dutt, A., Mogonye, J., Ageh, V., Xu, R., Forsdike, J., Mishra, R. S., Scharf, T. W. (2016). Friction Stir Processing of A-286 Stainless Steel: Microstructural Evolution during Wear. Wear. 356-357, 94-100.
Sidhar, H., Martinez, N. Y., Mishra, R. S., Silvanus, J. (2016). Friction stir welding of Al–Mg–Li 1424 alloy. Materials & Design. 106, 146–152. Elsevier.
García-Bernal, M., Mishra, R., Verma, R., Hernández-Silva, D. (2016). Influence of friction stir processing tool design on microstructure and superplastic behavior of Al-Mg alloys. Materials Science and Engineering: A. 670, 9–16. Elsevier.
Das, S., Martinez, N. Y., Das, S., Mishra, R. S., Grant, G. J., Jana, S., Polikarpov, E. (2016). Magnetic Properties of Friction Stir Processed Composite. JOM. 68(7), 1925–1931. Springer US.
Mehdi, H., Mishra, R. (2016). Mechanical properties and microstructure studies in Friction Stir Welding (FSW) joints of dissimilar alloy–a review. Journal of Achievements in Materials and Manufacturing Engineering. 77(1), .
Alagarsamy, K., Fortier, A., Komarasamy, M., Kumar, N., Mohammad, A., Banerjee, S., Han, H., Mishra, R. S. (2016). Mechanical Properties of High Entropy Alloy Al0. 1CoCrFeNi for Peripheral Vascular Stent Application. Cardiovascular Engineering and Technology. 7(4), 448–454. Springer US.
Dutt, A. K., Pasebani, S., Charit, I., Mishra, R. S. (2016). On the creep behavior of dual-scale particle strengthened nickel based alloy. Materials Science and Engineering: A. 676, 406–410. Elsevier.
Palanivel, S., Dutt, A., Faierson, E., Mishra, R. (2016). Spatially dependent properties in a laser additive manufactured Ti–6Al–4V component. Materials Science & Engineering: A. 654, 39–52. Elsevier.
Mehdi, H., Mishra, R. (2016). This copy is for personal use only-distribution prohibited.. Manufacturing Engineering. 77(1), 31–40.
Komarasamy, M., Mishra, R. S., Mukherjee, S., Young, M. L. (2015). Friction Stir-Processed Thermally Stable Immiscible Nanostructured Alloys. JOM. 67(12), 2820–2827. http://dx.doi.org/10.1007/s11837-015-1641-z
Komarasamy, M., Kumar, N., Tang, Z., Mishra, R., Liaw, P. (2015). Effect of microstructure on the deformation mechanism of friction stir-processed Al0. 1CoCrFeNi high entropy alloy. Materials Research Letters. 3(1), 30–34. Taylor & Francis.
Pasebani, S., Charit, I., Mishra, R. S. (2015). Effect of tool rotation rate on constituent particles in a friction stir processed 2024Al alloy. Materials Letters. 160, 64–67. North-Holland.
Carpenter, J. S., Beese, A. M., Bourell, D. L., Hamilton, R. F., Mishra, R. S., Sears, J. (2015). Foreword: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science. 46(LA-UR–15-24295), . Los Alamos National Laboratory (LANL), Los Alamos, NM (United States).
Palanivel, S., Nelaturu, P., Glass, B., Mishra, R. (2015). Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy. Materials & Design. 65, 934–952. Elsevier.
Kumar, N., Komarasamy, M., Nelaturu, P., Tang, Z., Liaw, P., Mishra, R. (2015). Friction stir processing of a high entropy alloy Al0. 1CoCrFeNi. JOM. 67(5), 1007–1013. Springer US.
Komarasamy, M., Mishra, R. S., Mukherjee, S., Young, M. L. (2015). Friction stir-processed thermally stable immiscible nanostructured alloys. JOM. 67(12), 2820--2827. Springer US.
Kumar, N., Ying, Q., Nie, X., Mishra, R., Tang, Z., Liaw, P., Brennan, R., Doherty, K., Cho, K. (2015). High strain-rate compressive deformation behavior of the Al 0.1 CrFeCoNi high entropy alloy. Materials & Design. 86, 598–602. Elsevier.
Garcia-Bernal, M. A., Mishra, R., Verma, R., Hernandez-Silva, D. (2015). Inhibition of abnormal grain growth during hot deformation behavior of friction stir processed 5083 Al alloys. Materials Science and Engineering: A. 636, 326–330. Elsevier.
Mishra, R., Kumar, N., Komarasamy, M. (2015). Lattice strain framework for plastic deformation in complex concentrated alloys including high entropy alloys. Materials Science and Technology. 31(10), 1259–1263. Taylor & Francis.
Mishra, R. (2015). Modeling of Natural Convection Non Reversible Single Pass Pressurized and Non Pressurized Solar Hot Water Systems for Domestic Applications. Other. 3(3), 451–458.
Mridha, S., Das, S., Aouadi, S. M., Mukherjee, S., Mishra, R. S. (2015). Nanomechanical behavior of CoCrFeMnNi high-entropy alloy. JOM. 67(10), 2296--2302. Springer US.
Mridha, S., Das, S., Aouadi, S. M., Mukherjee, S., Mishra, R. S. (2015). Nanomechanical Behavior of CoCrFeMnNi High-Entropy Alloy. JOM. 67(10), 2296–2302. Springer US.
Pasebani, S., Dutt, A. K., Burns, J., Charit, I., Mishra, R. S. (2015). Oxide dispersion strengthened nickel based alloys via spark plasma sintering. Materials Science and Engineering: A. 630, 155–169. Elsevier.
Kumar, N., Choudhuri, D., Banerjee, R., Mishra, R. (2015). Strength and ductility optimization of Mg–Y–Nd–Zr alloy by microstructural design. International Journal of Plasticity. 68, 77–97. Pergamon.
Wang, J., Su, J., Mishra, R. S., Xu, R., Baumann, J. A. (2014). A preliminary study of deformation behavior of friction stir welded Ti-6Al-4V. Journal of Materials Engineering and Performance. 23(8), 3027–3033. Springer US.
Wang, J., Yuan, W., Mishra, R. S., Charit, I. (2014). An evaluation of creep behaviour in friction stir welded MA754 alloy. Journal of Materials Engineering and Performance. 23(9), 3159–3164. Springer US.
Kumar, N., Dendge, N., Banerjee, R., Mishra, R. (2014). Effect of microstructure on the uniaxial tensile deformation behavior of Mg–4Y–3RE alloy. Materials Science and Engineering: A. 590, 116–131. Elsevier.
Pasebani, S., Dutt, A., Charit, I., Mishra, R. S. (2014). Effect of yttria and alumina on the microstructure and mechanical properties of nickel-chromium based alloys. Journal of the Idaho Academy of Science. 50(1), 81–82. Idaho Academy of Science.
Davila-Vilchis, J., Mishra, R. (2014). Performance of a hydrokinetic energy system using an axial-flux permanent magnet generator. Energy. 65, 631–638. Pergamon.
Kumar, N., Komarasamy, M., Mishra, R. (2014). Plastic deformation behavior of ultrafine-grained Al–Mg–Sc alloy. Journal of Materials Science. 49(12), 4202–4214. Springer US.
Li, H., Hu, Z., Chandrashekhara, K., Du, X., Mishra, R. S. (2014). Reliability-based fatigue life investigation for a medium-scale composite hydrokinetic turbine blade. Ocean Engineering. 89, 230–242. Pergamon.
Komarasamy, M., Mishra, R. (2014). Serration behavior and shear band characteristics during tensile deformation of an ultrafine-grained 5024 Al alloy. Materials Science and Engineering: A. 616, 189–195. Elsevier.
Novak, T. G., Vora, H. D., Mishra, R. S., Young, M. L., Dahotre, N. B. (2014). Synthesis of Al0. 5CoCrCuFeNi and Al0. 5CoCrFeMnNi High-Entropy Alloys by Laser Melting. Metallurgical and Materials Transactions B. 45(5), 1603–1607. Springer US.
Dahotre, N. B., Mishra, R. S., Young, M. L., (2014). Synthesis of Al0.5CoCrCuFeNi and Al0.5CoCrFeMnNi High-entropy Alloys by Laser Melting.
Wang, J., Su, J., Mishra, R. S., Xu, R., Baumann, J. A. (2014). Tool wear mechanisms in friction stir welding of Ti–6Al–4V alloy. Wear. 321, 25–32. Elsevier.
Mishra, R. S. (2013). 1. High strain rate superplasticity in friction stir processed ultrafine grained Mg-Al-Zn alloys, (2013) Materials Science and Engineering A, 562, pp. 69-76..
Yuan, W., Panigrahi, S. K., Mishra, R. S. (2013). Achieving high strength and high ductility in friction stir-processed cast magnesium alloy. Metallurgical and Materials Transactions A. 44(8), 3675–3684. Springer US.
Mishra, R. S. (2013). Achieving high strength and high ductility in friction stir-processed cast magnesium alloy, 2013, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44 (8) , pp. 3675-3684..
Mishra, R. S. (2013). Additivity of strengthening mechanisms in ultrafine grained Al-Mg-Sc alloy, 2013, Materials Science and Engineering A 580 , pp. 175-183..
Kumar, N., Mishra, R. (2013). Additivity of strengthening mechanisms in ultrafine grained Al–Mg–Sc alloy. Materials Science & Engineering: A. 580, 175–183. Elsevier.
Kapoor, R., Kandasamy, K., Mishra, R., Baumann, J., Grant, G. (2013). Effect of friction stir processing on the tensile and fatigue behavior of a cast A206 alloy. Materials Science and Engineering: A. 561, 159–166. Elsevier.
Mishra, R. S. (2013). Effect of friction stir processing on the tensile and fatigue behavior of a cast A206 alloy, (2013) Materials Science and Engineering A, 561, pp. 159-166..
Kang, J., Wilkinson, D. S., Mishra, R. K., Yuan, W., Mishra, R. S. (2013). Effect of inhomogeneous deformation on anisotropy of AZ31 magnesium sheet. Materials Science and Engineering: A. 567, 101–109. Elsevier.
Mishra, R. S. (2013). Effect of inhomogeneous deformation on anisotropy of AZ31 magnesium sheet, 2012, Materials Science and Engineering A, Article in Press..
Palanivel, S., Mishra, R., Davis, B., DeLorme, R., Cho, K. D. (2013). Effect of initial microstructure on the microstructural evolution and joint efficiency of a WE43 alloy during friction stir welding. Journal of the Minerals, Metals, and Materials Society. 253–261.
Mishra, R. S. (2013). Gouthama, Study of b -precipitates and their effect on the directional yield asymmetry of friction stir processed and aged AZ91C alloy, 2013, Materials Science and Engineering A, 560 , pp. 500-509..
Mohan, A., Yuan, W., Mishra, R. (2013). High strain rate superplasticity in friction stir processed ultrafine grained Mg–Al–Zn alloys. Materials Science and Engineering: A. 562, 69–76. Elsevier.
Mishra, R. S. (2013). Influence of strain and strain rate on microstructural evolution during superplasticity of Mg-Al-Zn sheet, 2013, Journal of Materials Science 48 (16) , pp. 5633-5644..
Mohan, A., Panigrahi, S., Mishra, R., Verma, R. (2013). Influence of strain and strain rate on microstructural evolution during superplasticity of Mg–Al–Zn sheet. Journal of Materials Science. 48(16), 5633–5644. Springer US.
Santhanakrishnan, S., Kumar, N., Dendge, N., Choudhuri, D., Katakam, S., Palanivel, S., Vora, H., Banerjee, R., Mishra, R., Dahotre, N. B. (2013). Macro-and Microstructural Studies of Laser-Processed WE43 (Mg-Y-Nd) Magnesium Alloy. Metallurgical and Materials Transactions B. 44(5), 1190–1200. Springer US.
Wang, J., Yuan, W., Mishra, R. S., Charit, I. (2013). Microstructural evolution and mechanical properties of friction stir welded ODS alloy MA754. Journal of Nuclear Materials. 442(1), 1–6. North-Holland.
Mishra, R. S. (2013). Microstructure and mechanical properties of a friction stir processed Ti-6Al-4V alloy, 2013, Materials Science and Engineering A 573 , pp. 67-74..
Su, J., Wang, J., Mishra, R. S., Xu, R., Baumann, J. A. (2013). Microstructure and mechanical properties of a friction stir processed Ti–6Al–4V alloy. Materials Science and Engineering: A. 573, 67–74. Elsevier.
Wang, J., Yuan, W., Mishra, R. S., Charit, I. (2013). Microstructure and mechanical properties of friction stir welded oxide dispersion strengthened alloy. Journal of Nuclear Materials. 432(1), 274–280. North-Holland.
Mishra, R. S. (2013). Microstructure and mechanical properties of friction stir welded oxide dispersion strengthened alloy, 2013, Journal of Nuclear Materials432 (1) , pp. 274-280..
Thompson, B., Doherty, K., Su, J., Mishra, R. S. (2013). Nano-sized grain refinement using friction stir processing. Other. 9–19. Springer International Publishing.
Komarasamy, M., Mishra, R. S., Baumann, J. A., Grant, G., Hovanski, Y. (2013). Processing, Microstructure and Mechanical Property Correlation in Al-B4C Surface Composite Produced via Friction Stir Processing. Other. 440, 4–9.
Mishra, R. S. (2013). Stress corrosion cracking susceptibility of ultrafine grained Al-Mg-Sc alloy, (2013) Materials Science and Engineering A, 565, pp. 80-89..
Argade, G., Kumar, N., Mishra, R. (2013). Stress corrosion cracking susceptibility of ultrafine grained Al–Mg–Sc alloy. Materials Science and Engineering: A. 565, 80–89. Elsevier.
Jain, V., Mishra, R., Gupta, A., others, (2013). Study of $β$-precipitates and their effect on the directional yield asymmetry of friction stir processed and aged AZ91C alloy. Materials Science and Engineering: A. 560, 500–509. Elsevier.
Jain, V., Mishra, R. S., others, (2013). Superplastic behavior and microstructural stability of friction stir processed AZ91C alloy. Journal of Materials Science. 48(6), 2635–2646. Springer US.
Jain, V., Mishra, R., Verma, R., Essadiqi, E. (2013). Superplasticity and microstructural stability in a Mg alloy processed by hot rolling and friction stir processing. Scripta Materialia. 68(7), 447–450. Pergamon.
Mishra, R. S. (2013). Superplasticity and microstructural stability in a Mg alloy processed by hot rolling and friction stir processing, (2013) Scripta Materialia, 68 (7), pp. 447-450..
Mishra, R. (2013). Thermo Economic Analysis and Optimization of Thermal Insulations. 1(2), 201–204.
Kumar, N., Mishra, R. S. (2013). Ultrafine-Grained Al-Mg-Sc Alloy via Friction-Stir Processing. Metallurgical and Materials Transactions A. 44(2), 934–945. Springer US.
Mishra, R. S. (2013). Ultrafine-Grained Al-Mg-Sc Alloy via Friction-Stir Processing, 2013, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44, pp 934-945..
Mishra, R. S. (2012). Argade, G.R., Kandasamy, K., Panigrahi, S.K., Mishra, R.S.
Argade, G., Kandasamy, K., Panigrahi, S., Mishra, R. (2012). Corrosion behavior of a friction stir processed rare-earth added magnesium alloy. Corrosion Science. 58, 321–326. Pergamon.
MISHRA, R., MCFADDEN, S., MUKHERJEE, A. (2012). Department of Chemical Engineering and Materials Science University of California, One Shield Avenue, Davis, CA 95616. Other. 80, 231. Springer Science & Business Media.
Mishra, R. S. (2012). Directional anisotropy in the mechanical behavior of friction stir processed and aged AZ91 alloy, 2012, Materials Science Forum702-703 , pp. 64-67..
Argade, G., Panigrahi, S., Mishra, R. (2012). Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium. Corrosion Science. 58, 145–151. Pergamon.
Mishra, R. S. (2012). Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium, 2012, Corrosion Science, 58 , pp. 145-151..
Li, H., Chandrashekhara, K., Mishra, R. S. (2012). Fatigue life investigation for a medium scale composite hydrokinetic turbine blade. Society for the Advancement of Material and Process Engineering (SAMPE).
Mishra, R. S. (2012). Fatigue life investigation for a medium scale composite hydrokinetic turbine blade, 2012, International SAMPE Technical Conference..
Yuan, W., Mishra, R. (2012). Grain size and texture effects on deformation behavior of AZ31 magnesium alloy. Materials Science and Engineering: A. 558, 716–724. Elsevier.
Mishra, R. S. (2012). Grain size and texture effects on deformation behavior of AZ31 magnesium alloy, 2012, Materials Science and Engineering A, 558 , pp. 716-724..
Garcia-Bernal, M. A., Mishra, R., Verma, R., Hernandez-Silva, D. (2012). Hot deformation behavior of friction-stir processed strip-cast 5083 aluminum alloys with different Mn contents. Materials Science and Engineering: A. 534, 186–192. Elsevier.
Mishra, R. S. (2012). Hot deformation behavior of friction-stir processed strip-cast 5083 aluminum alloys with different Mn contents, 2012, Materials Science and Engineering A534 , pp. 186-192..
Yuan, W., Mishra, R., Carlson, B., Verma, R., Mishra, R. (2012). Material flow and microstructural evolution during friction stir spot welding of AZ31 magnesium alloy. Materials Science and Engineering: A. 543, 200–209. Elsevier.
Mishra, R. S. (2012). Material flow and microstructural evolution during friction stir spot welding of AZ31 magnesium alloy, 2012, Materials Science and Engineering A543 , pp. 200-209..
Ghosh, M., Kumar, K., Mishra, R. (2012). Process optimization for friction-stir-welded martensitic steel. Metallurgical and Materials Transactions A. 43(6), 1966–1975. Springer US.
Mishra, R. S. (2012). Process optimization for friction-stir-welded martensitic steel, 2012, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science43 (6) , pp. 1966-1975..
Argade, G., Yuan, W., Kandasamy, K., Mishra, R. (2012). Stress corrosion cracking susceptibility of ultrafine grained AZ31. Journal of Materials Science. 47(19), 6812–6822. Springer US.
Mishra, R. S. (2012). Stress corrosion cracking susceptibility of ultrafine grained AZ31, 2012, Journal of Materials Science47 (19) , pp. 6812-6822..
Kumar, N., Mishra, R. (2012). Thermal stability of friction stir processed ultrafine grained Al Mg Sc alloy. Materials Characterization. 74, 1–10. Elsevier.
Mishra, R. S. (2012). Thermal stability of friction stir processed ultrafine grained AlMgSc alloy, 2012, Materials Characterization, 74 , pp. 1-10..
Panigrahi, S., Kumar, K., Kumar, N., Yuan, W., Mishra, R., DeLorme, R., Davis, B., Howell, R., Cho, K. (2012). Transition of deformation behavior in an ultrafine grained magnesium alloy. Materials Science and Engineering: A. 549, 123–127. Elsevier.
Mishra, R. S. (2012). Transition of deformation behavior in an ultrafine grained magnesium alloy, 2012, Materials Science and Engineering A549 , pp. 123-127..
Mishra, R. S. (2012). Ultrasonic underwater transmission of composite turbine blade structural health, 2012, Proceedings of SPIE - The International Society for Optical Engineering8343 , art. no. 83430O..
Mishra, R. S. (2011). "A stress-strain model for a two-phase ultrafine-grained aluminum alloy," (2011) Scripta Materialia 64 (1), pp. 57-60..
Mishra, R. S. (2011). "A study on the combined effect of forging and aging in Mg-Y-RE alloy," (2011) Materials Science and Engineering A 530 (1) , pp. 28-35..
Mishra, R. S. (2011). "Characterization of high cycle fatigue behavior of a new generation aluminum lithium alloy," (2011) Acta Materialia 59, pp. 5946–5960..
Mishra, R. S. (2011). "Critical grain size for change in deformation behavior in ultrafine grained Al-Mg-Sc alloy," (2011) Scripta Materialia 64 (6), pp. 576-579..
Mishra, R. S. (2011). "Development of nanocrystalline structure in Cu during friction stir processing (FSP)," (2011) Materials Science and Engineering A 528 (16-17), pp. 5458-5464..
Mishra, R. S. (2011). "Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy," (2011) Scripta Materialia 64 (6), pp. 580-583..
Mishra, R. S. (2011). "Effect of tool design and process parameters on properties of Al alloy 6016 friction stir spot welds," ( 2011) Journal of Materials Processing Technology 211 (6), pp. 972-977..
Mishra, R. S. (2011). "Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties," (2011) Materials Science and Engineering A 528 (28) , pp. 8111-8119..
Mishra, R. S. (2011). "Friction stir welding of precipitation strengthened aluminium alloys: Scope and challenges," (2011) Science and Technology of Welding and Joining 16 (4), pp. 343-347..
Mishra, R. S. (2011). "Grain boundary behavior in an ultrafine-grained aluminum alloy," (2011) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 42 (12) , pp. 3558-3561..
Mishra, R. S. (2011). "Influence of grain size and texture on Hall-Petch relationship for a magnesium alloy," (2011) Scripta Materialia 65 (11) , pp. 994-997..
Mishra, R. S. (2011). "Microstructure and mechanical behavior of friction stir processed ultrafine grained Al-Mg-Sc alloy," (2011) Materials Science and Engineering A 528 (18), pp. 5883-5887..
Mishra, R. S. (2011). "Probabilistic fatigue life prediction model for alloys with defects: Applied to A206," (2011) Acta Materialia 59 (9), pp. 3447-3462..
Mishra, R. S. (2011). "Process forces during friction stir channeling in an aluminum alloy," (2011) Journal of Materials Processing Technology 211 (2), pp. 305-311..
Mishra, R. S. (2011). "The effect of friction stir processing on the microstructure and mechanical properties of equal channel angular pressed 5052Al alloy sheet," (2011) Journal of Materials Science 46 (16), pp. 5527-5533..
De, P., Su, J., Mishra, R. (2011). A stress–strain model for a two-phase ultrafine-grained aluminum alloy. Scripta Materialia. 64(1), 57–60. Pergamon.
Panigrahi, S., Yuan, W., Mishra, R., DeLorme, R., Davis, B., Howell, R., Cho, K. (2011). A study on the combined effect of forging and aging in Mg–Y–RE alloy. Materials Science and Engineering: A. 530, 28–35. Elsevier.
De, P., Mishra, R., Baumann, J. A. (2011). Characterization of high cycle fatigue behavior of a new generation aluminum lithium alloy. Acta Materialia. 59(15), 5946–5960. Pergamon.
Kandasamy, K., Argade, G., Panigrahi, S., Mishra, R. S. (2011). Corrosion and Mechanical Behavior of Friction Stir Processed Mg- CeO 2 Surface Composite. Journal of Materials, Metals and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.
Kumar, N., Mishra, R. S., Huskamp, C., Sankaran, K. K. (2011). Critical grain size for change in deformation behavior in ultrafine grained Al–Mg–Sc alloy. Scripta Materialia. 64(6), 576–579. Pergamon.
Su, J., Nelson, T., McNelley, T., Mishra, R. (2011). Development of nanocrystalline structure in Cu during friction stir processing (FSP). Materials Science and Engineering: A. 528(16), 5458–5464. Elsevier.
Mishra, R. S. (2011). Effect of coating on mechanical properties of magnesium alloy friction stir spot welds, 2011, TMS Annual Meeting, pp. 401-407..
Argade, G., Mishra, R., Smith, C., Mahoney, M. (2011). Effect of friction stir processing on corrosion behavior of AA5083 aluminum alloy. Other. 307–313. John Wiley & Sons, Inc..
Mishra, R. S. (2011). Effect of friction stir processing on corrosion behavior of AA5083 aluminum alloy, 2011, TMS Annual Meeting, pp. 307-313..
Mishra, R. S. (2011). Effect of heat index on microstructure and mechanical behavior of friction stir processed AZ31, 2011, Magnesium Technology, pp. 205-209..
Yuan, W., Mishra, R. S., Carlson, B., Mishra, R., Verma, R., Kubic, R. (2011). Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy. Scripta Materialia. 64(6), 580–583. Pergamon.
Ghosh, M., Kumar, K., Mishra, R. (2011). Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties. Materials Science and Engineering: A. 528(28), 8111–8119. Elsevier.
De, P., Mishra, R. (2011). Friction stir welding of precipitation strengthened aluminium alloys: scope and challenges. 16(4), 343–347. Taylor & Francis.
De, P., Mishra, R. (2011). Grain Boundary Behavior in an Ultrafine-Grained Aluminum Alloy. Metallurgical and Materials Transactions A. 42(12), 3558. Springer US.
Yuan, W., Panigrahi, S., Su, J., Mishra, R. (2011). Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy. Scripta Materialia. 65(11), 994–997. Pergamon.
Smith, C., Mishra, R., Argade, G., Mahoney, M. (2011). Mechanical Properties of Friction Stir Processed, Friction Stir Welded, and Gas Metal Arc Welded AA5083 Aluminum Plate. Other. 265–280. John Wiley & Sons, Inc..
Mishra, R. S. (2011). Mechanical properties of friction stir processed, friction stir welded, and gas metal arc welded AA5083 aluminum plate, 2011, TMS Annual Meeting, pp. 267-280..
Kumar, N., Mishra, R. S., Huskamp, C., Sankaran, K. K. (2011). Microstructure and mechanical behavior of friction stir processed ultrafine grained Al–Mg–Sc alloy. Materials Science and Engineering: A. 528(18), 5883–5887. Elsevier.
Prabhakaran, R., Wang, J., Charit, I., Cole, J., Murty, K., Mishra, R. S. (2011). Microstructure and Mechanical Properties of Irradiated Friction Stir Welded ODS Alloys. Journal of Materials, Metals and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.
Mishra, R. S. (2011). Microstructure and mechanical properties of Mg-1.7Y-1.2Zn sheet processed by hot rolling and friction stir processing, 2011, Magnesium Technology, pp. 565-570..
Subhra Mukherji, S., Kolekar, N., Banerjee, A., Mishra, R. S. (2011). Numerical investigation and evaluation of optimum hydrodynamic performance of a horizontal axis hydrokinetic turbine. Other. 3(6), 063105. AIP.
Mishra, R. S. (2011). Numerical investigation and evaluation of optimum hydrodynamic performance of a horizontal axis hydrokinetic turbine, 2011, Journal of Renewable and Sustainable Energy3 (6) , art. no. 063105..
Kapoor, R., Rao, V. S., Mishra, R. S., Baumann, J. A., Grant, G. (2011). Probabilistic fatigue life prediction model for alloys with defects: applied to A206. Acta Materialia. 59(9), 3447–3462. Pergamon.
Balasubramanian, N., Mishra, R. S., Krishnamurthy, K. (2011). Process forces during friction stir channeling in an aluminum alloy. Journal of Materials Processing Technology. 211(2), 305–311. Elsevier.
Kumar, N., Mishra, R. S., Huskamp, C., Sankaran, K. K. (2011). The effect of friction stir processing on the microstructure and mechanical properties of equal channel angular pressed 5052Al alloy sheet. Journal of Materials Science. 46(16), 5527–5533. Springer US.
Ghosh, M., Kumar, K., Mishra, R. (2010). Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel. Scripta Materialia. 63(8), 851–854. Elsevier.
Balasubramanian, N., Mishra, R. S., Krishnamurthy, K. (2010). Development of a mechanistic model for friction stir channeling. Journal of Manufacturing Science and Engineering. 132(5), 054504. American Society of Mechanical Engineers.
Jana, S., Mishra, R. S., Baumann, J. B., Grant, G. (2010). Effect of friction stir processing on fatigue behavior of an investment cast Al–7Si–0.6 Mg alloy. Acta Materialia. 58(3), 989–1003. Pergamon.
Freeney, T., Mishra, R. (2010). Effect of friction stir processing on microstructure and mechanical properties of a cast-magnesium–rare earth alloy. Metallurgical and Materials Transactions A. 41(1), 73. Springer US.
Mishra, R. S. (2010). EMP6. 2 Localized Microstructural Modification of Castings for High Performance and Repair.
Prabhakaran, R., Wang, J., Yuan, W., Chitrada, K., Cole, J., Charit, I., Mishra, R. S. (2010). Friction Stir Welding of Oxide Dispersion Strengthened Alloys. Other. 102, 857–858. American> Nuclear Society.
Kapoor, R., Kumar, N., Mishra, R., Huskamp, C., Sankaran, K. (2010). Influence of fraction of high angle boundaries on the mechanical behavior of an ultrafine grained Al–Mg alloy. Materials Science and Engineering: A. 527(20), 5246–5254. Elsevier.
Bhargava, G., Yuan, W., Webb, S., Mishra, R. S. (2010). Influence of texture on mechanical behavior of friction-stir-processed magnesium alloy. Metallurgical and Materials Transactions A. 41(1), 13. Springer US.
Deshmukh, S., Mishra, R., Robertson, I. (2010). Investigation of creep threshold stresses using in situ TEM straining experiment in an Al–5Y 2 O 3–10SiC composite. Materials Science and Engineering: A. 527(9), 2390–2397. Elsevier.
Mishra, R. S. (2010). LMM1. 7 Friction Stir Surface Modification Approach for Enhanced Fatigue Allowable.
De, P., Mishra, R. (2010). Microstructural evolution during fatigue of ultrafine grained aluminum alloy. Materials Science and Engineering: A. 527(29), 7719–7730. Elsevier.
Aljarrah, M., Essadiqi, E., Verma, R., Mishra, R. (2010). Microstructure Evolution and Mechanical Properties of Mg-Y-Zn Sheets. Other. ASM International, Member/Customer Service Center Materials Park OH 44073-0002 United States.
Yadava, M., Mishra, R., Chen, Y., Carlson, B., Grant, G. (2010). Study of friction stir joining of thin aluminium sheets in lap joint configuration. Other. 15(1), 70–75. Taylor & Francis.
Ma, Z., Liu, F., Mishra, R. (2010). Superplastic deformation mechanism of an ultrafine-grained aluminum alloy produced by friction stir processing. Acta Materialia. 58(14), 4693–4704. Pergamon.
Chitrada, K., Prabhakaran, R., Wang, J., Zirker, L., Meyer, M., Cole, J., Murty, K., Mishra, R. S., Butt, D., Frary, M., others, (2010). Weldability Characteristics of Oxide Dispersion Strengthened Alloys: An Overview.
Sudheer, A., Varaprasad, G., Reddy, P. A., Devi, D. U., Singh, H., Mishra, R., Kelkar, V. (2009). 1. Electronic Information Resources and Services in Agriculture: A Study Bashir Ahmad 01 2. A Solution for 21 st Century Higher Education: Re-engineering?. Other. 47(27), .
Mishra, R. S. (2009). 11.1. Other. 255. John Wiley & Sons.
Miles, M., Smith, C., Opichka, J., Cerveny, L., Mahoney, M. W., Mohan, A., Mishra, R. S. (2009). Bending limits in friction stir processed 5083 aluminum plate. The Minerals, Metals & Materials Society (TMS).
Charit, I., Mishra, R. S. (2009). Constitutive models for superplastic flow. Other. 22, .
Dutta, A., De, P. S., Mishra, R., Watson, T. (2009). Deformation behavior of an ultrafine-grained Al–Ni–Y–Co–Sc alloy. Materials Science and Engineering: A. 513, 239–246. Elsevier.
Mishra, R. S. (2009). Dislocation-particle interaction at elevated temperatures. Journal of Minerals, Metals and Materials (JOM) Society, Vol. 53, No. 9, pp. 61(2), 52–55. Springer Boston.
De, P. S., Mishra, R. S., Smith, C. (2009). Effect of microstructure on fatigue life and fracture morphology in an aluminum alloy. Scripta Materialia. 60(7), 500–503. Pergamon.
Jana, S., Mishra, R. S., Baumann, J. B., Grant, G. (2009). Effect of stress ratio on the fatigue behavior of a friction stir processed cast Al–Si–Mg alloy. Scripta Materialia. 61(10), 992–995. Pergamon.
Balasubramanian, N., Mishra, R., Krishnamurthy, K. (2009). Friction stir channeling: Characterization of the channels. Journal of Materials Processing Technology. 209(8), 3696–3704. Elsevier.
Gupta, K., Mishra, R. S., Chen, Y., Carlson, B. A., Gayden, X. (2009). Friction stir form welding of aluminum tubes. The Minerals, Metals & Materials Society (TMS).
Rubal, M., Lippold, J., Juhas, M. (2009). Friction Stir Welding and Processing V. Other. 21–28.
Yuan, W., Rodelas, J. M., Mishra, R. S. (2009). Friction stir welding of dual phase steel. The Minerals, Metals & Materials Society (TMS).
Garcia-Bernal, M. A., Mishra, R. S., Verma, R., Hernandez-Silva, D. (2009). High strain rate superplasticity in continuous cast Al–Mg alloys prepared via friction stir processing. Scripta Materialia. 60(10), 850–853. Pergamon.
Dixit, V., Mishra, R., Lederich, R., Talwar, R. (2009). Influence of process parameters on microstructural evolution and mechanical properties in friction stirred Al-2024 (T3) alloy. Other. 14(4), 346–355. Taylor & Francis.
Rodelas, J. M., Mishra, R. S., Hilmas, G., Yuan, W. (2009). Mechanical evaluation of friction stir spot welded advanced high strength steels. The Minerals, Metals & Materials Society (TMS).
Ross, N. C., Mishra, R. S., Senkov, O. N., Miracle, D. B. (2009). Observation of Shear Thickening during Compressive Flow of Mg54Y11Ag7Cu28 in the Supercooled Liquid Region. Metallurgical and Materials Transactions A. 40(1), 1–3. Springer US.
Hatamleh, O., Mishra, R. S., Oliveras, O. (2009). Peening effects on mechanical properties in friction stir welded AA 2195 at elevated and cryogenic temperatures. Materials & Design. 30(8), 3165–3173. Elsevier.
Balasubramanian, N., Gattu, B., Mishra, R. S. (2009). Process forces during friction stir welding of aluminium alloys. Other. 14(2), 141–145. Taylor & Francis.
Rodelas, J., Hilmas, G., Mishra, R. S. (2009). Sinterbonding cobalt-cemented tungsten carbide to tungsten heavy alloys. International Journal of Refractory Materials and Hard Metals. 27(5), 835–841. Elsevier.
Ma, Z., Mishra, R. S., Liu, F. (2009). Superplastic behavior of micro-regions in two-pass friction stir processed 7075Al alloy. Materials Science and Engineering: A. 505(1), 70–78. Elsevier.
Vipin, B., Mishra, R. (2009). Tool-Life Prediction Model for Heavy Machining of Cast Steel Material (EN 6) With Cemented Carbide Tool (P-40). Other. 1(4), 269–277.
Colligan, K. J., Mishra, R. S. (2008). A conceptual model for the process variables related to heat generation in friction stir welding of aluminum. Scripta Materialia. 58(5), 327–331. Pergamon.
Charit, I., Mishra, R. S. (2008). Abnormal grain growth in friction stir processed alloys. Scripta Materialia. 58(5), 367–371. Pergamon.
De, P., Obermark, C., Mishra, R. (2008). Development of a reversible bending fatigue test bed to evaluate bulk properties using sub-size specimens. Journal of Testing and Evaluation. 36(4), 1–4. ASTM international.
Shi, X., Mishra, R., Watson, T. (2008). Effect of temperature and strain rate on tensile behavior of ultrafine-grained aluminum alloys. Materials Science and Engineering: A. 494(1), 247–252. Elsevier.
Sharma, SR,, Mishra, R. (2008). Fatigue crack growth behavior of friction stir processed aluminum alloy. Scripta Materialia. 59(4), 395–398. Pergamon.
Wang, Y., Mishra, R. S., Watson, T. (2008). Mechanical behavior of devitrified ultrafine-grained Al–4.0 Y–4.0 Ni–0.9 Co matrix composites. Scripta Materialia. 59(10), 1079–1082. Pergamon.
Dixit, M., Mishra, R., Sankaran, K. (2008). Structure–property correlations in Al 7050 and Al 7055 high-strength aluminum alloys. Materials Science and Engineering: A. 478(1), 163–172. Elsevier.
Ciulik, J., Daehn, G., Dai, K., del Rio, E., Dobatkin, S., Drawin, S., Estrin, Y., Fine, M., Forlerer, E., Freudenberger, J., Mishra, R. S. (2007). Charit, I. 203 Chembarisova, RG 27 Chokshi, AH 231 Choo, H. 185. Materials Science and Engineering: A. 463, 284.
Wang, Y., Shi, X., Mishra, R. S., Watson, T. (2007). Ductility improvement in devitrified ultrafine-grained Al–4.0 Y–4.0 Ni–0.9 Co alloy via hot rolling. Scripta Materialia. 56(11), 923–925. Pergamon.
Dixit, V., Mishra, R., Lederich, R., Talwar, R. (2007). Effect of initial temper on mechanical properties of friction stir welded Al-2024 alloy. Other. 12(4), 334–340. Taylor & Francis.
Johannes, L., Charit, I., Mishra, R., Verma, R. (2007). Enhanced superplasticity through friction stir processing in continuous cast AA5083 aluminum. Materials Science and Engineering: A. 464(1), 351–357. Elsevier.
Wang, Y., Mishra, R. S. (2007). Finite element simulation of selective superplastic forming of friction stir processed 7075 Al alloy. Materials Science and Engineering: A. 463(1), 245–248. Elsevier.
Jana, S., Mishra, R. S., Chou, H., Herling, D. (2007). Friction stir microstructural modification of investment cast F357. The Minerals, Metals & Materials Society (TMS).
Jahazi, M., Guerin, M., Mishra, R., others, (2007). Friction stir welding of an aerospace magnesium alloy. The Minerals, Metals & Materials Society.
Wang, Y., Shi, X., Mishra, R. S., Watson, T. (2007). Friction stir welding of devitrified Al–4.0 Y–4.0 Ni–0.9 Co alloy produced by amorphous powders. Scripta Materialia. 56(11), 971–974. Pergamon.
Johannes, L., Mishra, R. (2007). Multiple passes of friction stir processing for the creation of superplastic 7075 aluminum. Materials Science and Engineering: A. 464(1), 255–260. Elsevier.
Dixit, M., Newkirk, J. W., Mishra, R. S. (2007). Properties of friction stir-processed Al 1100–NiTi composite. Scripta Materialia. 56(6), 541–544. Pergamon.
Kalya, P., Krishnamurthy, K., Mishra, R. S., Baumann, J. A. (2007). Specific energy and temperature mechanistic models for friction stir processing of AL-F357. The Minerals, Metals & Materials Society (TMS).
Tewari, A., Spowart, J., Gokhale, A., Mishra, R., Miracle, D. B. (2006). Characterization of the effects of friction stir processing on microstructural changes in DRA composites. Materials Science and Engineering: A. 428(1), 80–90. Elsevier.
Newkirk, J. W., Mishra, R. S., Jambunathan, A. (2006). Creating Friction and Wear Surfaces on Aluminum Alloys through Friction Stirring.
Ma, Z., Sharma, SR,, Mishra, R. (2006). Effect of friction stir processing on the microstructure of cast A356 aluminum. Materials Science and Engineering: A. 433(1), 269–278. Elsevier.
Samarth, T., Deshmukh, S. P., Mishra, R. S., Krishnamurthy, K., Tayloe, R. (2006). Fracture criteria prediction in wiredrawing using finite element modeling. Other. 39(1), 58–62.
Ma, Z., Sharma, SR,, Mishra, R. (2006). Microstructural modification of as-cast Al-Si-Mg alloy by friction stir processing. Metallurgical and Materials Transactions A. 37(11), 3323–3336. Springer-Verlag.
Johannes, L. B., Yowell, L. L., Sosa, E., Arepalli, S., Mishra, R. S. (2006). Survivability of single-walled carbon nanotubes during friction stir processing. Nanotechnology. 17(12), 3081. IOP Publishing.
Mishra, R. S. (2006). The mechanics of biological materials. Springer Verlag.
Newkirk, J., Jambunathan, A., Rolla, R., Mishra, R. (2006). TRIB5. 2 Creating Friction and Wear Surfaces on Aluminum Alloys through Friction Stirring.
Mishra, R., Sharma, SR,, Mahoney, M. (2005). 05-086 Embedding a Wrought Microstructure in a Cast Component: A Novel Application of Friction Stir Processing. Other. 113, 139.
Mishra, R. S. (2005). Approaches toward integrating functionality into structural materials. Journal of Minerals, Metals and Materials (JOM) Society, Vol. 53, No. 9, pp. 57(3), 17–17. Springer.
Deshmukh, S., Mishra, R., Kendig, K. (2005). Creep behavior of extruded Al–6Mg–1Sc–1Zr–10vol.% SiC p composite. Materials Science and Engineering: A. 410, 53–57. Elsevier.
Dutta, A., Charit, I., Johannes, L., Mishra, R. (2005). Deep cup forming by superplastic punch stretching of friction stir processed 7075 Al alloy. Materials Science and Engineering: A. 395(1), 173–179. Elsevier.
Mishra, R., Ma, Z. (2005). Development of ultrafine-grained microstructure and low temperature (0.48 T m) superplasticity in friction stir processed Al?‘ Mg?‘ Zr. Scripta Materialia. 53(1), 75–80. Elsevier Science.
Ma, Z., Mishra, R. S. (2005). Development of ultrafine-grained microstructure and low temperature (0.48 T m) superplasticity in friction stir processed Al–Mg–Zr. Scripta Materialia. 53(1), 75–80. Pergamon.
Ma, Z., Mishra, R. S., Mahoney, M. W., Grimes, R. (2005). Effect of friction stir processing on the kinetics of superplastic deformation in an Al-Mg-Zr alloy. Metallurgical and Materials Transactions A. 36(6), 1447–1458. Springer Boston.
Deshmukh, S., Mishra, R. (2005). Effect of Stress State on Primary Creep Behavior of PM Al-Mg-Sc-Zr-SiC p Composite. Materials Science and Technology. 1, 4. ASSOCIATION FO IRON AND STEEL INDUSTRY.
Shi, X., Mishra, R. S., Watson, T. (2005). Elevated temperature deformation behavior of nanostructured Al–Ni–Gd–Fe alloys. Scripta Materialia. 52(9), 887–891. Pergamon.
Mishra, R. S., Sharma, M., Mahoney, M. W. (2005). Embedding a wrought microstructure in a cast component: A novel application of friction stir processing. American Foundry Society (AFS).
Tandon, S., Mishra, R. S., Krishnamurthy, K., Tayloe, R., Deshmukh, S. (2005). Fracture criteria prediction in wiredrawing using finite element modeling. The Wire Association International, Inc..
Mohan, S., Mishra, R. S. (2005). Friction stir microforming of superplastic alloys. Other. 11(4), 226–229. Springer Berlin/Heidelberg.
Mishra, R. S., Ma, Z. (2005). Friction stir welding and processing. Other. 50(1), 1–78. Elsevier.
Johannes, L., Mishra, R. S., Charit, I. (2005). High strain rate superplastic properties of 7075 aluminum via friction stir processing. The Minerals, Metals & Materials Society (TMS).
Mishra, R., Dixit, V., Bolser, D., Lederich, R., Talwar, R., Ballard, D. L. (2005). Influence of Processing Parameters on the Mechanical Properties of Friction Stir Welded 2024-T8 Aluminum Alloy.
Ma, Z., Mishra, R. (2005). Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China. Scripta Materialia. 53(1), 75–80. Tarrytown, NY: Elsevier Science Inc., 1996-.
Grishaber, R., Sergueeva, A., Mishra, R., Mukherjee, A. (2005). Laminated metal composites—High temperature deformation behavior. Materials Science and Engineering: A. 403(1), 17–24. Elsevier.
Newkirk, J., Jambunathan, A., Ply, J., Mishra, R. S. (2005). Local Modification of P/M Parts to Fully Densify and Enhance Properties. Other. 2, 6. METAL POWDER INDUSTRIES FEDERATION.
Jambunathan, A., Ply, J., Mishra, R. S., Newkirk, J. W. (2005). Local modification of p/m parts to fully densify and enhance properties. Metal powder industries federation.
Charit, I., Mishra, R. S. (2005). Low temperature superplasticity in a friction-stir-processed ultrafine grained Al–Zn–Mg–Sc alloy. Acta Materialia. 53(15), 4211–4223. Pergamon.
MA, Z., MISHRA, R. (2005). 摩擦撹はん処理した Al-Mg-Zr における超微細粒ミクロ組織及び低温 (0.48 T m) 超塑性の発達. Scripta Materialia. 53(1), 75–80.
Deshmukh, S., Mishra, R. S., Kendig, K. (2004). Creep behavior and threshold stress of an extruded Al–6Mg–2Sc–1Zr alloy. Materials Science and Engineering: A. 381(1), 381–385. Elsevier.
Sharma, S. R., Ma, Z., Mishra, R. S. (2004). Effect of friction stir processing on fatigue behavior of A356 alloy. Scripta Materialia. 51(3), 237–241. Pergamon.
Krishnamurthy, K., Mishra, R. S., Kulkarni, A. J., Deshmukh, S. (2004). Effect of particle size distribution on strength of precipitation-hardened alloys. Journal of Materials Research.
Kulkarni, A. J., Krishnamurthy, K., Deshmukh, S. P., Mishra, R. S. (2004). Effect of particle size distribution on strength of precipitation-hardened alloys. Journal of Materials Research. 19(09), 2765–2773. Cambridge University Press.
Charit, I., Mishra, R. S. (2004). Evaluation of microstructure and superplasticity in friction stir processed 5083 Al alloy. Journal of Materials Research. 19(11), 3329–3342. Cambridge University Press.
Mishra, R. S. (2004). Expanding Superplastic Forming Applications via Friction Stir Processing.
Mishra, R. S. (2004). Friction stir processing for superplasticity. ASM International.
Mishra, R. (2004). FRO 7.4 Expanding Superplastic Forming Applications via Friction Stir Processing.
Charit, I., Ma, Z., Mishra, R. S. (2004). High strain rate superplasticity in aluminum alloys via friction stir processing. The Minerals, Metals & Materials Society (TMS).
Kulkarni, A. J., Krishnamurthy, K., Deshmukh, S. P., Mishra, R. S. (2004). Microstructural optimization of alloys using a genetic algorithm. Materials Science and Engineering: A. 372(1), 213–220. Elsevier.
Hayes, R., Berbon, P., Mishra, R. (2004). Microstructure characterization and creep deformation of an Al-10 wt pct Ti-2 wt pct Cu nanocomposite. Metallurgical and Materials Transactions A. 35(12), 3855–3861. Springer-Verlag.
Ma, Z., Mishra, R. S., Mahoney, M. W. (2004). Superplasticity in cast A356 induced via friction stir processing. Scripta Materialia. 50(7), 931–935. Pergamon.
Mishra, R. S., Shi, X. (2004). Tensile Behavior of Bulk Nanostructured Al-Y-Ni Alloys Containing Fe or Co.
Charit, I., Mishra, R. S. (2004). Ultrafine grained aluminum alloys via friction stir processing. The Minerals, Metals & Materials Society (TMS).
Liou, F. W., Mishra, R. S., Agrawal, A., Allada, V., Leu, M., Okafor, A. C. (2003). An integrated and distributed environment for a manufacturing capstone course. American Society for Engineering Education (ASEE).
Mishra, R. S. (2003). Capstone Module in a Metallurgical Engineering Laboratory Course for Enhanced Learning Experience.
Ma, Z., Mishra, R. S. (2003). Cavitation in superplastic 7075Al alloys prepared via friction stir processing. Acta Materialia. 51(12), 3551–3569. Pergamon.
Newkirk, J., Mishra, R. S., Thomas, J., Hawk, J. (2003). Friction stir powder processing to create surface composites. (6), 6–60. Metal Powder Industries Federation.
Mishra, R. S., Ma, Z., Charit, I. (2003). Friction stir processing: a novel technique for fabrication of surface composite. Materials Science and Engineering: A. 341(1), 307–310. Elsevier.
Jata, K., Mahoney, M., Mishra, R., Semiatin, S., Lienert, T. (2003). Friction Stir Welding and Processing II as held at the 2003 TMS Annual Meeting.
Charit, I., Mishra, R. S. (2003). High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing. Materials Science and Engineering: A. 359(1), 290–296. Elsevier.
Ma, Z., Mishra, R. S., Mahoney, M. W., Grimes, R. (2003). High strain rate superplasticity in friction stir processed Al–Mg–Zr alloy. Materials Science and Engineering: A. 351(1), 148–153. Elsevier.
Shaw, L., Suryanarayana, C., Mishra, R. (2003). Materials Science & Technology 2003.
Su, J., Nelson, T., Mishra, R. S., Mahoney, M. (2003). Microstructural investigation of friction stir welded 7050-T651 aluminium. Acta Materialia. 51(3), 713–729. Pergamon.
MA, Z., MISHRA, R. (2003). 摩擦ステア処理により調製した超塑性 7075Al 合金における空洞発生. Acta Materialia. 51(12), 3551–3569.
Liou, F., Allada, V., Leu, M., Mishra, R. S., Okafor, A., Agrawal, A. (2002). A PRODUCT FOCUSSED MANUFACTURING CURRICULUM. Other. 7, 1.
Mahoney, M., Mishra, R. S., Nelson, T. (2002). Friction stir processing creates aluminum-alloy superplasticity. Other. 69(2), 31–33. Business News Publishing.
Ma, Z., Mishra, R. S., Tjong, S. (2002). High-temperature creep behavior of TiC particulate reinforced Ti–6Al–4V alloy composite. Acta Materialia. 50(17), 4293–4302. Pergamon.
Charit, I., Mishra, R. S., Mahoney, M. W. (2002). Multi-sheet structures in 7475 aluminum by friction stir welding in concert with post-weld superplastic forming. Scripta Materialia. 47(9), 631–636. Elsevier.
Ma, Z., Mishra, R. S., Mahoney, M. W. (2002). Superplastic deformation behaviour of friction stir processed 7075Al alloy. Acta Materialia. 50(17), 4419–4430. Pergamon.
Islamgaliev, R., Valiev, R., Mishra, R. S., Mukherjee, A. (2001). Enhanced superplastic properties in bulk metastable nanostructured alloys. Materials Science and Engineering: A. 304, 206–210. Elsevier.
Berbon, P. B., Bingel, W. H., Mishra, R. S., Bampton, C. C., Mahoney, M. W. (2001). Friction stir processing: a tool to homogenize nanocomposite aluminum alloys. Scripta Materialia. 44(1), 61–66. Pergamon.
Jata, K., Mahoney, M., Mishra, R., Semiatin, S., Field, D. (2001). Friction stir welding and processing.
Mishra, R. S., Valiev, R., McFadden, S., Islamgaliev, R., Mukherjee, A. (2001). High-strain-rate superplasticity from nanocrystalline Al alloy 1420 at low temperatures. Philosophical Magazine A. 81(1), 37–48. Taylor & Francis Group.
Mishra, R. S., Stolyarov, V., Echer, C., Valiev, R., Mukherjee, A. (2001). Mechanical behavior and superplasticity of a severe plastic deformation processed nanocrystalline Ti–6Al–4V alloy. Materials Science and Engineering: A. 298(1), 44–50. Elsevier.
Mishra, R. S., Mukherjee, A. (2001). Processing of high hardness-high toughness alumina matrix nanocomposites. Materials Science and Engineering: A. 301(1), 97–101. Elsevier.
Valiev, R., Song, C., McFadden, S., Mukherjee, A., Mishra, R. (2001). TEM/HREM observations of nanostructured superplastic Ni3AI. Philosophical Magazine A. 81(1), 25–36. Taylor & Francis.
Mishra, R. S., Mukherjee, A. (2000). An analysis of the role of grain size on superplasticity of $γ$ titanium aluminides. Journal of Materials Science. 35(1), 147–151. Springer Netherlands.
Mishra, R. S., Mukherjee, A. (2000). Electric pulse assisted rapid consolidation of ultrafine grained alumina matrix composites. Materials Science and Engineering: A. 287(2), 178–182. Elsevier.
McFadden, S., Sergueeva, A., Mishra, R. S., Mukherjee, A. (2000). High strain rate superplasticity in microcrystalline and nanocrystalline materials. Materials Science and Technology. 16(11-12), 1340–1344. Taylor & Francis.
McFadden, S., Zhilyaev, A., Mishra, R. S., Mukherjee, A. (2000). Observations of low-temperature superplasticity in electrodeposited ultrafine grained nickel. Materials Letters. 45(6), 345–349. North-Holland.
Han, Y. H., Mishra, R. S., Gasch, M. J., Lee, H. B., Mukherjee, A. K. (2000). Processing of Si₃N₄/SiC and Boron-Modified Nanocomposites Via Ceramic Precursor Route. Other. 6(3), 245–249.
Mishra, R. S., McFadden, S., Valiev, R., Mukherjee, A. (1999). Deformation mechanisms and tensile superplasticity in nanocrystalline materials. JOM. 51(1), 37–40. Springer Science & Business Media.
Mishra, R. S. (1999). Designing DRA composites for high creep strength. JOM. 51(11), 65–68. Springer-Verlag.
Mishra, R. S., Mahoney, M., McFadden, S., Mara, N., Mukherjee, A. (1999). High strain rate superplasticity in a friction stir processed 7075 Al alloy. Scripta Materialia. 42(2), 163–168. Pergamon.
McFadden, S., Mishra, R. S., Valiev, R., Zhilyaev, A., Mukherjee, A. (1999). Low-temperature superplasticity in nanostructured nickel and metal alloys. Nature. 398(6729), 684. Nature Publishing Group.
Mishra, R., McFadden, S., Valiev, R., Mukherjee, A. (1999). MICROSTRUCTURES AND MECHANICAL PROPERTIES-ELEVATED TEMPERATURE DEFORMATION AND DUCTILITY-Deformation Mechanisms and Tensile Superplasticity in Nanocrystalline Materials. Journal of Minerals, Metals and Materials (JOM) Society, Vol. 53, No. 9, pp. 51(1), 37–41. [Warrendale, Pa.: The Society (TMS), c1989-.
Mishra, R. S., Jayaram, V., Majumdar, B., Lesher, C., Mukherjee, A. (1999). Preparation of a ZrO 2–Al 2 O 3 nanocomposite by high-pressure sintering of spray-pyrolyzed powders. Journal of Materials Research. 14(03), 834–840. Cambridge University Press.
Mishra, R. S., Valiev, R., McFadden, S., Islamgaliev, R., Mukherjee, A. (1999). Severe plastic deformation processing and high strain rate superplasticity in an aluminum matrix composite. Scripta Materialia. 40(10), 1151–1155. Pergamon.
Jayaram, V., Mishra, R., Majumdar, B., Lesher, C., Mukherjee, A. (1998). Dense nanometric ZrO 2 Al 2 O 3 from spray-pyrolysed powders. Other. 133(1), 25–31. Elsevier.
Mishra, R., Lu, R., Grishaber, R., Mukherjee, A. (1998). Effect of stressed pre-exposure on the creep strengthening of a 2009 Al-SiC w composite. Scripta Materialia. 38(12), 1819–1824. Pergamon.
Mishra, R., Risbud, S., Mukherjee, A. (1998). Influence of initial crystal structure and electrical pulsing on densification of nanocrystalline alumina powder. Journal of Materials Research. 13(01), 86–89. Cambridge University Press.
Mishra, R., Valiev, R., McFadden, S., Mukherjee, A. (1998). Tensile superplasticity in a nanocrystalline nickel aluminide. Materials Science and Engineering: A. 252(2), 174–178. Elsevier.
Grishaber, R., Mishra, R., Mukherjee, A., No, A. G. (1997). 19980311 088 BUTTON CODE.
Mishra, R., Bieler, T., Mukherjee, A. (1997). Mechanism of high strain rate superplasticity in aluminium alloy composites. Acta Materialia. 45(2), 561–568. Pergamon.
West, D. A., Mishra, R. S., Mukherjee, A. K. (1997). RAPID CONSOLIDATION OF NANOPHASE AfeO2 AND AN AhO2/AbTiOs COMPOSITE. Other. 286, 347. Materials Research Society.
Valiev, R., Korznikova, G., Mulyukov, K. Y., Mishra, R., Mukherjee, A. (1997). Saturation magnetization and Curie temperature of nanocrystalline nickel. Philosophical Magazine B. 75(6), 803–811. Taylor & Francis.
Pandey, A., Mishra, R., Paradkar, A., Mahajan, Y. (1997). Steady state creep behaviour of an AlAl2O3 alloy. Acta Materialia. 45(3), 1297–1306. Pergamon.
Mishra, R., Valiev, R., Mukherjee, A. (1997). The observation of tensile superplasticity in nanocrystalline materials. Nanostructured Materials. 9(1-8), 473–476. Pergamon.
Mishra, R., Mukherjee, A. (1997). The rate controlling deformation mechanism in high strain rate superplasticity. Materials Science and Engineering: A. 234, 1023–1025. Elsevier.
Mishra, R., Nandy, T., Sagar, P., Gogia, A., Banerjee, D. (1996). Creep of Ti3Al base alloys. Transactions of the Indian Institute of Metals. 49(4), 331–342. Indian Institute of Metals.
Pandey, A., Mishra, R., Mahajan, Y. (1996). Effect of isothermal heat treatment on the creep behaviour of an Al TiCp composite. Materials Science and Engineering: A. 206(2), 270–278. Elsevier.
Grishaber, R., Mishra, R., Mukherjee, A. (1996). Effect of testing environment on intergranular microsuperplasticity in an aluminum MMC. Materials Science and Engineering: A. 220(1-2), 78–84. Elsevier.
Mishra, R., Mukherjee, A., Yamazaki, K., Shoda, K. (1996). Effect of TiO 2 doping on rapid densification of alumina by plasma activated sintering. Journal of Materials Research. 11(05), 1144–1148. Cambridge University Press.
Mishra, R. S., Lesher, C. E., Mukherjee, A. K. (1996). High-Pressure Sintering of Nanocrystalline $γ$Al2O3. Journal of the American Ceramic Society. 79(11), 2989–2992. Blackwell Publishing Ltd.
Bieler, T., Mishra, R., Mukherjee, A. (1996). High-strain-rate superplasticity in aluminum-matrix composites. Journal of Minerals, Metals and Materials (JOM) Society, Vol. 53, No. 9, pp. 48(2), 52–57. Springer Boston.
Mishra, R., Echer, C., Bampton, C., Bieler, T., Mukherjee, A. (1996). Influence of temperature on segregation in 2009 Al-SiCw composite and its implication on high strain rate superplasticity. Scripta Materialia. 35(2), 247–252. Pergamon.
Ranganath, S., Roy, T., Mishra, R. (1996). Microstructure and deformation of TiB+ Ti2C reinforced titanium matrix composites. Materials Science and Technology. 12(3), 219–226. Taylor & Francis.
Ranganath, S., Mishra, R. (1996). Steady state creep behaviour of particulate-reinforced titanium matrix composites. Acta Materialia. 44(3), 927–935. Pergamon.
Bieler, T. R., Mishra, R. S., Mukherjee, A. K. (1996). Superplasticity in hard-to-machine materials. Other. 26(1), 75–106. Annual Reviews 4139 El Camino Way, PO Box 10139, Palo Alto, CA 94303-0139, USA.
Mishra, R., Pandey, A., Mukherjee, A. (1995). An evaluation of steady state creep mechanism in an Al-Mg/26 Al2O3f composite. Materials Science and Engineering: A. 201(1-2), 205–210. Elsevier.
Mishra, R., Mukherjee, A. (1995). Creep behavior of rapidly solidified and processed aluminum alloys. Other. 319–332.
Mishra, R., Singh, S., Sriramamurthy, A., Pandey, M. (1995). Effect of grain boundary orientation on creep behaviour of directionally solidified nickel base superalloy (CM 247 LC alloy). Materials Science and Technology. 11(4), 341–346. Taylor & Francis.
Varma, V., Mishra, R., Joshi, V. (1995). Effect of heat treatment on microstructure and mechanical properties of CM 247 LC cast superalloy rotor. Transactions of the Indian Institute of Metals. 48(2), 69–79.
Farkas, D., Mishra, R., Mukherjee, A. (1995). Instantaneous strain measurements during high-temperature stress cycling of a dispersion-strengthened niobium alloy. Scripta Metallurgica et Materialia. 32(11), 1725–1730. Pergamon.
Mishra, R., Pandey, A., Prasad, K., Mukherjee, A. (1995). Microstructure of a creep tested Al-20 vol.% SiC composite. Scripta Metallurgica et Materialia. 33(3), 479–484. Pergamon.
Mishra, R., Schneider, J., Shackelford, J., Mukherjee, A. (1995). Plasma activated sintering of nanocrystalline $γ$-Al 2 O 3. Nanostructured Materials. 5(5), 525–544. Pergamon.
Mishra, R., Banerjee, D., Mukherjee, A. (1995). Primary creep in a Ti-25Al-11Nb alloy. Materials Science and Engineering: A. 192, 756–762. Elsevier.
Mishra, R., Bieler, T., Mukherjee, A. (1995). Superplasticity in powder metallurgy aluminum alloys and composites. Acta Metallurgica et Materialia. 43(3), 877–891. Pergamon.
Mishra, R., Bannerjee, D., Mukherjee, A. (1995). Surface cracking during creep of a Ti-25Al-11Nb alloy. Materials Science and Engineering: A. 192, 763–768. Elsevier.
Nandy, T., Mishra, R., Gogia, A., Banerjee, D. (1995). The effect of aluminium on the creep behaviour of titanium aluminide alloys. Scripta Metallurgica et Materialia. 32(6), 851–856. Pergamon.
Mishra, R., Mukherjee, A. (1995). THE INFLUENCE OF SECOND PHASE DISPERSOIDS ON THE ACTIVATION ENERGY. Other. 171. Tms.
Pandey, A., Mishra, R., Mahajan, Y. (1994). High-temperature creep of Al TiB2 particulate composites. Materials Science and Engineering: A. 189(1-2), 95–104. Elsevier.
Mishra, R., Nandy, T., Greenwood, G. (1994). The threshold stress for creep controlled by dislocation-particle interaction. Philosophical Magazine A. 69(6), 1097–1109. Taylor & Francis.
Mishra, R., Banerjee, D. (1994). Transient mechanisms in diffusional creep in a titanium aluminide. Scripta Metallurgica et Materialia. 31(11), 1555–1560. Pergamon.
Nandy, T., Mishra, R., Banerjee, D. (1993). Creep behaviour of an orthorhombic phase in a Ti Al Nb alloy. Scripta Metallurgica et Materialia. 28(5), 569–574. Pergamon.
Pandey, A., Mishra, R., Mahajan, Y. (1993). Creep fracture in Al-SiC metal-matrix composites. Journal of Materials Science. 28(11), 2943–2949. Springer Netherlands.
Mishra, R., Singh, A., Roy, T. (1993). Creep of an Al [sbnd] Co [sbnd] Cu quasicrystal. Philosophical Magazine Letters. 68(4), 225–230. Taylor & Francis.
Pandey, A., Mishra, R., Mahajan, Y. (1993). On the anomalous creep behaviour of an XD Al-TiB2 composite. Scripta Metallurgica et Materialia. 29(9), 1199–1204. Pergamon.
Mishra, R., Paradkar, A., Rao, K. (1993). Steady state creep behaviour of a rapidly solidified and further processed Al-5 wt% Ti alloy. Acta Metallurgica et Materialia. 41(7), 2243–2251. Pergamon.
Mishra, R. (1992). Dislocation creep mechanism map for particle strengthened materials. Scripta Metallurgica et Materialia. 26(2), 309–313. Pergamon.
Das, D., Paradkar, A., Mishra, R. (1992). Microstructure and creep behaviour of laser surface alloyed aluminium. Scripta Metallurgica et Materialia. 26(8), 1211–1214. Pergamon.
Mishra, R., Bieler, T., Mukherjee, A. (1992). On the superplastic behaviour of mechanically alloyed aluminium alloys. Scripta Metallurgica et Materialia. 26(10), 1605–1608. Pergamon.
Pandey, A., Mishra, R., Mahajan, Y. (1992). Steady state creep behaviour of silicon carbide particulate reinforced aluminium composites. Acta Metallurgica et Materialia. 40(8), 2045–2052. Pergamon.
Paradkar, A., Rao, K., Rao, P., Mishra, R. (1992). The effect of a magnesium addition on the microstructure of rapidly solidified Al-8wt% Fe-3wt% MM. Other. 7(3), 167–175. AB.
Mishra, R., Mukherjee, A. (1991). On superplasticity in silicon carbide reinforced aluminum composites. Scripta Metallurgica et Materialia. 25(2), 271–275. Pergamon.
Charit, I., Mishra, R. S. (1990). Constitutive Models for. Other. 22, 472. Asm International.
Pandey, A., Mishra, R., Mahajan, Y. (1990). Creep behaviour of an aluminium-silicon carbide particulate composite. Scripta Metallurgica et Materialia. 24(8), 1565–1570. Pergamon.
Mishra, R., Jones, H., Greenwood, G. (1990). Creep of a low carbon steel at low stresses and intermediate temperatures. Acta Metallurgica et Materialia. 38(3), 461–468. Pergamon.
Singh, R., Mishra, R. (1990). Influence of minor additions of Zr on the mechanical behaviour of a Mg/1bLi/1bAl alloy. Scripta Metallurgica et Materialia. 24(3), 451–456. Pergamon.
Mishra, R., Banerjee, D. (1990). Microstructure and steady state creep in Ti-24Al-11Nb. Materials Science and Engineering: A. 130(2), 151–164. Elsevier.
Mishra, R., Banerjee, D. (1990). On the influence of cooling rate in $β$ solution treatment for a Ti 25Al 11Nb alloy. Scripta Metallurgica et Materialia. 24(8), 1477–1482. Pergamon.
Mishra, R., Pandey, A. (1990). Some observations on the high-temperature creep behavior of 6061 Al-SiC composites. Metallurgical and Materials Transactions A. 21(7), 2089–2090. Springer.
Mishra, R., Jones, H., Greenwood, G. (1989). An analysis of low stress creep data for coarse-grained pure lead. Materials Letters. 8(5), 187–189. North-Holland.
Mishra, R., Jones, H., Greenwood, G. (1989). On the threshold stress for diffusional creep in pure metals. Philosophical Magazine A. 60(6), 581–590. Taylor & Francis.
Mishra, R., Jones, H., Greenwood, G. (1989). Some correlations between parameters relating to grain boundary self-diffusion in silver. Materials Science and Engineering: A. 117, L21–L24. Elsevier.
Mishra, R., Jones, H., Greenwood, G. (1988). An empirical correlation for the grain-boundary diffusion of impurities in copper. Journal of Materials Science Letters. 7(7), 728–730. Kluwer Academic Publishers.
Mishra, R., Murty, G. (1988). Effect of concurrent grain growth on the stress-strain rate curve of superplastic materials. Journal of Materials Science Letters. 7(3), 185–186. Springer Netherlands.
Mishra, R., Jones, H., Greenwood, G. (1988). Enhanced diffusional creep: The effect of grain growth. Scripta Metallurgica et Materialia. 22(3), 323–327. Pergamon.
Mishra, R., Murty, G. (1988). The stress-strain rate behaviour of superplastic Zn-Al eutectoid alloy. Journal of Materials Science. 23(2), 593–597. Kluwer Academic Publishers.
Sepulveda, A. O., Mishra, R. S. (1987). An analysis of grain-growth data in duplex materials on static annealing and during superplastic deformation. Journal of Materials Science. 22(6), 2153–2157. Springer Netherlands.
Sankaran, K. K., Mishra, R. S. (2017). Metallurgy and Design of Alloys with Hierarchical Microstructures. Elsevier.
Hovanski, Y., Sato, Y., Verma, R., Mishra, R. S., Mahoney, M. (2016). Friction Stir Welding and Processing VII. Springer.
Mishra, R. S., Komarasamy, M. (2016). Friction Stir Welding of High Strength 7XXX Aluminum Alloys. Butterworth-Heinemann.
Jana, S., Mishra, R. S., Grant, G. (2015). Friction Stir Casting Modification for Enhanced Structural Efficiency: A Volume in the Friction Stir Welding and Processing Book Series. Butterworth-Heinemann.
Smith, C. B., Mishra, R. S. (2014). Friction Stir Processing for Enhanced Low Temperature Formability: A Volume in the Friction Stir Welding and Processing Book Series. Butterworth-Heinemann.
Ma, Z., Mishra, R. S. (2014). Friction Stir Superplasticity for Unitized Structures: A volume in the Friction Stir Welding and Processing Book Series. Butterworth-Heinemann.
Kumar, N., Mishra, R. S., Baumann, J. A. (2013). Residual stresses in friction stir welding. Butterworth-Heinemann.
Zhu, Y. T., Langdon, T. G., Mishra, R. S., Semiatin, S. L., Saran, M., Lowe, T. C. (2013). Ultrafine grained materials II. John Wiley & Sons.
Watson, T. J., Mishra, R. S. (2011). Hollow structures formed with friction stir welding.
De, P., Yuan, W., Mishra, R. S. (2010). A Physical Interpretation of Basquin Relation. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Yuan, W., Mishra, R. S. (2010). Effect of Microstructure and Texture on Property of Friction Stir Processed Mgnesium Alloy Az 31 b. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Mishra, R. S., De, P., Kapoor, R., Yuan, W. (2010). Fatigue Behavior of Friction Stir Processed Ultrafine Grained Aluminum and Magnesium Alloys. Journal of The Minerals, Metals & Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Wang, J., Yuan, W., Mishra, R. S., Charit, I. (2010). Friction Stir Welding of Dispersion-Strengthened Alloy MA 754. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Prabhakaran, R., Wang, J., Chitrada, K., Yuan, W., Charit, I., Cole, J., Mishra, R. S. (2010). Microstructural and Mechanical Characteristics of Friction Stir Welded ODS Alloys. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Kumar, N., Mishra, R. S., Mohanty, G., Karthik, S., Rajan, K. (2010). The Effect of Friction Stir Welding on the Microstructure and Mechanical Behavior of Continuously Equal-Channel Angular Pressed(CECAP) A 5052 Alloy Sheets. Journal of the Minerals, Metals, and Materials Society. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.
Agrawal, A., Venketaramani, R., Lowenthal, L. B., Jacobs, L., Liu, X., Nakhoda, S., Zeng, Z., Mishra, R. S. (2009). Methods and systems for partial page caching of dynamically generated content.
Mishra, R. S. (2008). Preface to the Viewpoint Set on friction stir processing. Pergamon.
Mishra, R. S. (2008). Integral channels in metal components and fabrication thereof.
Watson, T. J., Mishra, R. S. (2007). Friction stir welded structures derived from AL-RE-TM alloys.
Watson, T. J., Mishra, R. S. (2007). Hollow structures formed with friction stir welding.
Watson, T. J., Mishra, R. S., Wang, Y. (2007). Secondary processing of structures derived from AL-RE-TM alloys.
Suryanarayana, C., Shaw, L., Mishra, R. (2005). Untitled. ASM INTERNATIONAL SUBSCRIPTIONS SPECIALIST CUSTOMER SERVICE, MATERIALS PARK, OH 44073-0002 USA.
Mishra, R. S. (2005). Integral channels in metal components and fabrication thereof.
Taleff, E. M., Friedman, P. A., Krajewski, P. E. (2004). Advances in superplasticity and superplastic forming: proceedings of a symposium: held during the 2004 TMS Annual Meeting, Charlotte, North Carolina, USA, March 14-18, 2004. Wiley.
Mishra, R. S., Newkirk, J. (2004). Selective reinforcement of metallic bodies.
Mishra, R. S., Mahoney, M. W. (2004). Metal superplasticity enhancement and forming process.
Mishra, R. S. (2003). Superplastic forming of micro components.
Shaw, L. L., Suryanarayana, C., Mishra, R. S. (2003). Processing and Properties of Structural Nanomaterials: Proceedings of Symposia Sponsored by the Powder Materials Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior of Materials Committee (Jt. ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society): Held at the Materials Science & Technology 2003 Meeting in Chicago, Illinois, USA, November 9-12, 2003. Wiley.
Mishra, R. S. (2000). Ultrafine grained materials: proceedings of a symposium: held during the 2000 TMS Annual Meeting in Nashville, Tennessee, March 12-16, 2000. Minerals, Metals, & Materials Society.
Sakuma, T., Aizawa, T., Higashi, K. (1999). Towards Innovation in Superplasticity II: Proceedings of the 2nd International Conference" Towards Innovation in Superplasticity" Held in Kobe City, Japan, September 1998. Trans Tech Publication.
Mishra, R. S., Mukherjee, A. K., Lesher, C. E. (1998). Nanocrystalline alumina-diamond composites.
Clare, A. T., Mishra, R. S., Merklein, M., Tan, H., Todd, I., Chechik, L., Li, J., Bambach, M. (2022). Alloy design and adaptation for additive manufacture. Journal of Materials Processing Technology. 299, . https://api.elsevier.com/content/abstract/scopus_id/85115623778
Mishra, R. S., Haridas, R. S., Agrawal, P. (2022). Friction stir-based additive manufacturing. Other. https://api.elsevier.com/content/abstract/scopus_id/85122866864
Mishra, R. S., Haridas, R. S., Agrawal, P. (2021). High entropy alloys – Tunability of deformation mechanisms through integration of compositional and microstructural domains. Other. 812, . https://api.elsevier.com/content/abstract/scopus_id/85103311276
Cai, W., Daehn, G., Vivek, A., Li, J., Khan, H., Mishra, R. S., Komarasamy, M. (2019). A state-of-the-art review on solid-state metal joining. Other. 141(3), . https://api.elsevier.com/content/abstract/scopus_id/85060911747
Mishra, R. S., Charit, I. (2015). TAOI B-Computational Microstructural Optimization Design Tool for High Temperature Structural Materials. University Of North Texas, Denton, TX (United States).
Charit, I., Frary, M., Butt, D., Murty, K., Zirker, L., Cole, J., Meyer, M., Mishra, R. S., Woltz, M. (2011). A Comparative Study of Welded ODS Cladding Materials for AFCI/GNEP Applications. University of Idaho.
Ross, N. C., Mishra, R. S., Senkov, O. N., Miracle, D. B. (2007). Compressive Flow Behavior of Mg54Cu28Ag7Y11 in the Supercooled Liquid Region (Preprint). MISSOURI UNIV-ROLLA.
Mishra, R. S., Webb, S., Freeney, T., Chen, Y., Gayden, X., Grant, G. J., Herling, D. R. (2007). Friction stir spot welding of 6016 aluminum alloy. Pacific Northwest National Laboratory (PNNL), Richland, WA (US).
Yadava, M., Mishra, R. S., Chen, Y., Gayden, X., Grant, G. J. (2007). FRICTION-STIR-LAP-WELDS OF AA6111 ALUMINUM ALLOY. Pacific Northwest National Laboratory (PNNL), Richland, WA (US).
Dixit, V., Mishra, R., Lederich, R., Talwar, R. (2006). Effect of Initial Temper on the Mechanical Properties of Friction Stir Welded Al-2024 Alloy (Preprint). MISSOURI UNIV-ROLLA DEPT OF MATERIALS SCIENCE AND ENGINEERING.
Freeney, T., Sharma, SR,, Mishra, R. (2006). Effect of welding parameters on properties of 5052 Al friction stir spot welds. SAE Technical Paper.
Mishra, R. S. (2000). Fundamental investigations of plasticity in high strength nanostructured aluminum alloys. DTIC Document.
Grishber, R., Mishra, R., Mukherjee, A. (1997). Modeling the Mechanical Behavior of Aluminum Laminated Metal Composites During High Temperature Deformation. CALIFORNIA UNIV DAVIS DEPT OF CHEMICALENGINEERING AND MATERIALS SCIENCE.
Mishra, R., Lee, W., Mukherjee, A., Kim, Y. (1995). Mechanism of superplasticity in gamma TiAl alloys. Minerals, Metals and Materials Society, Warrendale, PA (United States).
Burford, D. A., Mishra, R. S. (2022). Systems and methods for internal channel formation within a workpiece. USPTO.
