Hector R. Siller Carrillo

Previous Scheduled Teaching

Published Intellectual Contributions

Abstracts and Proceedings

• Uddin, M., Myers, T.A., Mirshams, R.A., Rout, B., Siller Carrillo, H.R. (2022). Influence of proton irradiation on strain rate sensitivity and microstructure in L-PBF fabricated 17-4 PH stainless steels. 837 37196. 14th International Topical Meeting on Nuclear Applications of Accelerators. https://www.ans.org/meetings/wm2021/session/view-911/
• Martinez Lopez, J., Mendoza-Buenrostro, C., Celis, P., Betancourt, H., Vazquez, E., Siller Carrillo, H.R., Rodriguez, C.A. (2018). Manufacturing and Test of Split and Recombine Micromixers with a Variable Cross-Section. The Electrochemical Society. http://ma.ecsdl.org/content/MA2018-02/39/1303.abstract?sid=67074ad4-6135-4d4e-9064-c8f2104b7cbc

Book Chapter

• Burford, D.A., Manzo, M., Siller Carrillo, H.R., Mishra, R.S., Gaddam, S., Gumaste, a., Koonce, J., Saez, A. (2023). Submerged Bobbin Tool (SBT) Tunneling Technology. Friction Stir Welding and Processing XII, TMS 2023. The Minerals, Metals & Materials Series. Springer, Cham. (2023). https://doi.org/10.1007/978-3-031-22661-8_23
• Siller, H., Vila, C., Estruch, A., Abellán, J., Romero, F. (2009). Managing collaborative process planning activities through extended enterprise. Collaborative Design and Planning for Digital Manufacturing.
• Abellan, J.V., Romero, F., Siller, H.R., Estruch, A., Vila, C. (2008). Adaptive control optimization of cutting parameters for high quality machining operations based on neural networks and search algorithms. Advances in Robotics, Automation and Control. InTech.

Conference Proceeding

• Hughes, Z.W., Siller Carrillo, H.R. (2023). Process planning for hybrid manufacturing: ball nose end milling and direct energy deposition of stainless steel. MSEC2023-102616. Proceedings of the ASME 2023 18th International Manufacturing Science and Engineering Conference MSEC2023. https://asmedigitalcollection.asme.org/MSEC/proceedings-abstract/MSEC2023/87240/1168768
• Burford, D.A., Manzo, M., Siller Carrillo, H.R., Gaddam, S., Gumaste, A., Koonce III, J., Saez, A., Mishra, R.S. (2023). Submerged Bobbin Tool (SBT) Tunneling Technology. TMS2015 Supplemental Proceedings. (2023) TMS Materials Processing and Manufacturing Division, TMS: Shaping and Forming Committee.
• Jourdan, A.J., Sarvadi, A., Siller Carrillo, H.R., Bostanci, H. (2022). Additively Manufactured Liquid-Cooled Heat Sink: Gyroid-Based Design, Fabrication and Testing. Proc. ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2022), Garden Grove, CA, October 25-27, 2022. https://doi.org/10.1115/IPACK2022-97476
• Cavazos, O., Manzo, M., Ramirez-Cedillo, E., Siller Carrillo, H.R. (2020). Bone-Integrated Optical Microlasers for In-vivo diagnostic biomechanical performances.
• Peto, M., Ramirez-Cedillo, E., Uddin, M., Rodriguez, C.A., Siller Carrillo, H.R. (2020). Mechanical Behavior of Lattice Structures Fabricated by Direct Light Processing with Compression Testing and Size Optimization of Unit Cell. 12260. ASME.
• Peto, M., Ramirez-Cedillo, E.G., Hernandez, A., Siller Carrillo, H.R. (2019). Structural design optimization of knee replacement implants for Additive Manufacturing. 34 574-583. SME.
• Siller Carrillo, H.R., Romero, D., Rabelo, R., Vazquez, E. (2019). Advanced CPS Service Oriented Architecture for Smart Injection Molding and Molds 4.0. IEEE.
• Sandoval-Robles, J., Ramirez-Cedillo, E.G., Ruiz-Huerta, L., Caballero-Ruiz, A., Rodriguez, C.A., Siller Carrillo, H.R. (2018). Process planning guidelines in selective laser melting for the manufacturing of stainless steel parts. 26 973-982. Amsterdam, Elsevier.
• Garcia-Lopez, E., Siller Carrillo, H.R., Rodriguez, C.A. (2018). Study of the fabrication of AISI 316L microneedle arrays. 26 117-124. Amsterdam, Elsevier.
• Cedeno, L., Garcia-Lopez, E., Vazquez, E., Siller Carrillo, H.R., Rodriguez, C.A. (2018). Laser micro-spot welding of thin AISI 302 stainless steel sheets. 10520 SPIE. https://www.spiedigitallibrary.org/conference-proceedings-of-spie/10520/1052018/Laser-micro-spot-welding-of-thin-AISI-302-stainless-steel/10.1117/12.2290003.full
• Ramirez-Cedillo, E., Lara-Padilla, H., Zamudio-Pena, L.F., Rodriguez-Garcia, A., Ruiz-Huerta, L., Ruiz, A.C., Siller, H.R. (2017). Process chain for the fabrication of a custom 3D barrier for guided bone regeneration. Other. 65 151–156. Elsevier.
• Garcia-Lopez, E., Medrano-Tellex, A., Ibarra-Medina, J., Siller, H.R., Elias-Zuniga, A., Rodriguez, C.A. (2016). Fiber laser microcutting of AISI 316L stainless steel tubes- influence of pulse energy and spot overlap on back wall dross. Other. 49 222–226.
• Estrada, P., Siller, H., Vázquez, E., Rodríguez, C., Martínez-Romero, O., Corona, R. (2016). Micro-injection Moulding of Polymer Locking Ligation Systems. Procedia CIRP. 49
• Rodriguez, L., Quint, F., Gorecky, D., Romero, D., Siller, H. (2015). Developing a Mixed Reality Assistance System Based on Projection Mapping Technology for Manual Operations at Assembly Workstations. Procedia Computer Science. 75
• Garcia-Lopez, E., Siller, H.R., Rodriguez, C.A. (2015). Reducing variability in micro-milling process using six sigma methodology. Industrial Engineering and Engineering Management (IEEM), 2015 IEEE International Conference on. 1117–1122.
• Ordaz, N., Romero, D., Gorecky, D., Siller, H. (2015). Serious Games and Virtual Simulator for Automotive Manufacturing Education & Training. Procedia Computer Science. 75
• Vila, C., Abellán-Nebot, J., Siller-Carrillo, H. (2015). Study of Different Cutting Strategies for Sustainable Machining of Hardened Steels. Procedia Engineering. 132
• Rios, H., González, E., Rodriguez, C., Siller, H., Contero, M. (2013). A mobile solution to enhance training and execution of troubleshooting techniques of the engine air bleed system on boeing 737. Procedia Computer Science. 25
• Figueroa, O., Rodriguez, C., Siller, H.R., Martinez-Romero, O, Flores-Villalba, E., D$\$’$\$iaz-Elizondo, J, Ram$\$’$\$irez, R. (2013). Lumbar cage design concepts based on additive manufacturing. High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping. 102 chapter.
• Medina-Barbosa, D., Siller, H. (2013). Product lifecycle management model for new technology based enterprises. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). 8091 LNCS
• Monroy, K., Attanasio, A., Ceretti, E., Siller, H.R., Hendrichs, N., Giardini, C. (2012). Evaluation of Superficial and Dimensional Quality Features in Metallic Micro-channels by Micro-Milling.. ICOMM 2012-7th International Conference on MicroManufacturing. 208–215.
• Escamilla, D., Siller, H., Guedea, F., Cortés, R., Coello-Cárdenas, V. (2012). Feedback scheme based on fuzzy control for shear force control. Proceedings - 2012 9th Electronics, Robotics and Automotive Mechanics Conference, CERMA 2012.
• Kitazawa, G., Siller, H., Abellán-Nebot, J. (2011). Comparison of analytical and artificial intelligent models for quality assurance in micro-milling operations. Proceedings - 2011 10th Mexican International Conference on Artificial Intelligence: Advances in Artificial Intelligence and Applications, MICAI 2011 - Proceedings of Special Session.
• Silva, J., Siller, H., Kitazawa, G., Abellán-Nebot, J. (2011). On-line production cost optimization in high performance machining operations through AI techniques. Proceedings - 2011 IEEE Electronics, Robotics and Automotive Mechanics Conference, CERMA 2011.
• Saldana, A., Vila, C., Rodríguez, C., Ahuett, H., Siller, H. (2009). Cooperative analysis of production systems with simulation techniques. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). 5738 LNCS
• Laura Jáuregui, A., Siller, H.R., Rodriguez, C.A., El$\$’$\$ias-Zúniga, Alex. (2009). Evaluation of Manufacturing Processes for Microfluidic Devices. AIP Conference Proceedings. 1181 (1) 222–230.
• Alvarado, M., Siller, H., Zambrano, P., Rodríguez, C., Rodríguez, M., Juárez, A., Toscano, H., Mascarenas, A. (2009). Short-time test for evaluating the machinability of alloys. WIT Transactions on Engineering Sciences. 64
• Abellan, J., Romero, F., Vila, C., Morales-Menendez, R., Siller, H. (2008). Adaptation of surface roughness models based on AI in changing environments. 7th Mexican International Conference on Artificial Intelligence - Proceedings of the Special Session, MICAI 2008.
• Abellan, J., Romero, F., Siller, H., Vila, C., Morales-Menendez, R. (2008). An intelligent hybrid decision support algorithm for cutting tool replacement in high performance machining operations. Proceedings of the IASTED International Conference on Artificial Intelligence and Applications, AIA 2008.
• Estruch, A., Vila, C., Siller, H.R., Romero, F., Abellán, J.V. (2008). Enabling innovative concurrent engineering and collaborative manufacturing in extended enterprises. Technology Management Conference (ICE), 2008 IEEE International. 1–8.
• Siller, H., Vila, C., Estruch, A., Abellán, J., Romero, F. (2008). Reference architecture for modeling collaborative engineering processes. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). 5220 LNCS
• Vila, C., Estruch, A., Siller, H., Abellán, J., Romero, F. (2007). Workflow methodology for collaborative design and manufacturing. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). 4674 LNCS
• Siller, H., Vila, C., Rodríguez, C. (2006). High productivity machining centre evaluation in collaborative engineering environment. Materials Science Forum. 526
• Rodriguez, C.A., Siller, H., Monreal, M. (2000). Machining Center Evaluation for Cycle Time in High-Speed Milling of Sculptured Surfaces. Society of Manufacturing Engineers.

Journal Article

• Peto, M., Garcia-Avila, J., Rodriguez, C.A., Siller Carrillo, H.R., Lopes da Silva, J., Ramirez-Cedillo, E. (2024). Review on Structural Optimization Techniques for Additively Manufactured Implantable Medical Devices. Frontiers in Energy. 10
• Vila Pastor, C., Abellan-Nebot, J., Siller Carrillo, H.R. (2024). A Review of the Factors Influencing Surface Roughness in Machining and Their Impact on Sustainability. Sustainability. 16 (5) 1917.
• Garcia-Lopez, E., Siller Carrillo, H.R., Vazquez-Lepe, E., Ramirez-Galindo, J., Rodriguez, C.A. (2024). Minimizing surface roughness and back wall dross for fiber laser micro-cutting on AISI 316 L tubes using response surface methodology. Materials Research Express. 11 026501.
• Haney, C.W., Siller Carrillo, H.R. (2023). Properties of Hyper-Elastic-Graded Triply Periodic Minimal Surfaces. Polymers. 15 (23) 4475. https://www.mdpi.com/2073-4360/15/23/4475
• Chavez-Tolentino, C., Li, X., Siller Carrillo, H.R., Sadat, H. (2023). Aerodynamic behavior and acoustic signature of propellers fabricated by additive manufacturing. International Journal of Advanced Manufacturing Technology. 129 3403-3412. https://link.springer.com/article/10.1007/s00170-023-12529-0
• Elias-Grajeda, A., Vazquez-Lepe, E., Siller Carrillo, H.R., Perales-Martinez, I.A., Resendiz-Hernandez, E., Ramirez-Herrera, C.A., Olvera-Trejo, D., Martinez-Romero, O. (2023). Polypropylene-Based Polymer Locking Ligation System Manufacturing by the Ultrasonic Micromolding Process. Polymers. 15 3049.
• Ju, S., Zhang, C., Siller Carrillo, H.R., Zhang, H. (2023). Additive-manufactured piezo-excited cantilever beams for liquid viscosity measurement with thickness optimization. Ferroelectrics. 606 (1) 1-12.
• Haney, C.W., Siller Carrillo, H.R. (2023). Anthropo-fidelic Behavior of Elastic-Plastic Lattice Structures. Polymer Testing. 120 107970.
• Liyanage, A., Karunarathne, D.J., Nasrazadani, S., D'Souza, F., Golden, T., Siller Carrillo, H.R. (2022). Polyphthalocyanine coatings for corrosion protection on additive manufactured steel materials. Progress in Organic Coatings. 170 106990. Progress in Organic Coatings.
• Uddin, M.J., Mirshams, R.A., Rout, B., Siller Carrillo, H.R. (2022). Small-Scale Mechanical Testing of Proton Irradiated L-Pbf 17-4 Ph Stainless Steels. Other. 16. https://ssrn.com/abstract=4230973
• England, J., Uddin, M., Ramirez, E., Karunarathne, D., Nasrazadani, S., Golden, T.D., Siller Carrillo, H.R. (2022). Nanoindentation Hardness and Corrosion Studies of Additively Manufactured 316L Stainless Steel. Journal of Materials Engineering and Performance.
• Uddin, M.J., Siller, H.R., Mirshams, R.A., Byers, T.A., Rout, B. (2022). Effects of proton irradiation on nanoindentation strain-rate sensitivity and microstructural properties in L-PBF 17-4 PH stainless steels. Materials Science and Engineering: A. 837 142719.
• Lopez-Garcia, C., Rodriguez, C.A., Siller Carrillo, H.R., Sandoval-Robles, J.A., Garcia-Lopez, E. (2022). A dimensional assessment of small features and lattice structures manufactured by Laser Powder Bed Fusion. Progress in Additive Manufacturing.
• Peto, M., Aguilar-Rosas, O., Ramirez-Cedillo, E., Jimenez, M., Hernandez, A., Siller Carrillo, H.R. (2021). A Proof of Concept Study of the Mechanical Behavior of Lattice Structures Used to Design a Shoulder Hemi-Prosthesis. Journal of Engineering and Science in Medical Diagnostics and Therapy. 4 031004. ASME.
• Ramirez-Cedillo, E., Garcia-Lopez, E., Ruiz-Huerta, L., Rodriguez, C.A., Siller, H.R. (2021). Reusable unit process life cycle inventory (UPLCI) for manufacturing: laser powder bed fusion (L-PBF). Production Engineering, Research and Development. 15 701–716. Springer.
• Uddin, M.J., Ramirez-Cedillo, E.R., Mirshams, R.A., Siller Carrillo, H.R. (2021). Nanoindentation and electron backscatter diffraction mapping in laser powder bed fusion of stainless steel 316L. Materials Characterization. 174 111047. Elsevier.
• Manzo, M., Cavazos, O., Ramirez-Cedillo, E., Siller Carrillo, H.R. (2020). Embedded Spherical Microlasers for In-vivo Diagnostic Biomechanical Performances. Journal of Engineering and Science in Medical Diagnostics and Therapy. 3 (4) 044504. ASME.
• Martinez-Lopez, J., Betancourt, H., Cuevas Iturbe, L., Vazquez, E., Naula, E.A., Martinez-Lopez, Siller, H., Mendoza-Buenrostro, C., Rodriguez, C.A. (2020). Characterization of Soft Tooling Photopolymers and Processes for Micromixing Devices with Variable Cross-Section. Micromachines. 11 (11) 970.
• Hernandez-Contreras, A., Ruiz-Huerta, L., Moock, V., Caballero-Ruiz, A., Siller Carrillo, H.R. (2020). Extended CT Void Analysis in FDM Additive Manufacturing Components. Materials.
• Ramirez-Cedillo, E., Uddin, M.J., Sandoval-Robles, J.A., Mirshams, R.A., Ruiz-Huerta, L., Rodriguez, C.A., Siller, H.R. (2020). Process planning of L-PBF of AISI 316L for improving surface quality and relating part integrity with microstructural characteristics. Surface & Coatings Technology. 396 125956.
• Nartu, M., Alam, T., Dasari, S., Mantri, S., Gorsse, S., Siller Carrillo, H.R., Dahotre, N.B., Banerjee, R. (2020). Enhanced Tensile Yield Strength in Laser Additively Manufactured Al0.3CoCrFeNi High Entropy Alloy. Materialia. 9 (2020) 100522.
• Torres, S., Siller Carrillo, H.R., Vila, C., Lopez, C., Rodriguez, C.A. (2020). Environmental Analysis of Selective Laser Melting in the Manufacturing of Aeronautical Turbine Blade. Journal of Cleaner Production. 105 (1-4) 1735–1743.
• Gutierrez-Solorio, H., Ruiz-Huerta, L., Caballero-Ruiz, A., Siller Carrillo, H.R., Borja, V. (2019). Energy Consumption Analysis for Additive Manufacturing Processes. International Journal of Advanced Manufacturing Technology. 105 (1-4) 1735 - 1743. Springer.
• Del Risco, R., Siller Carrillo, H.R., Perez-Rodriguez, R., Molina, A. (2019). Study of a Novel Ceramic Tool Performance in the Machining of Ti-6Al-7Nb Alloys. MRS Advances. Materials Research Society.
• Robles-Linares, J.A., Ramirez-Cedillo, E., Siller Carrillo, H.R., Rodriguez, C.A., Martinez-Lopez, J. (2019). Parametric Modeling of Biomimetic Cortical Bone Microstructure for Additive Manufacturing. Materials. 12 (6) 913. Basel, mdpi.
• Robles-Linares, J.A., Figueroa-Cavazos, J., Chuck-Hernandez, C.C., Siller Carrillo, H.R., Rodriguez, C.A., Martinez-Lopez, J. (2018). Hydrostatic high-pressure post-processing of specimens fabricated by DLP, SLA and FDM: an alternative for sterilization of polymer-based biomedical devices. Materials. 11 (12) 2540. mdpi.
• Lopez, C., Elias-Zuniga, A., Jimenez, I., Martinez-Romero, O., Siller Carrillo, H.R., Diabb, J.M. (2018). Experimental Determination of Residual Stresses Generated by Single Point Incremental Forming of AlSi10Mg Sheets Produced Using SLM Additive Manufacturing Process. Materials. 11 2542.
• Garcia, E., Ibarra-medina, J.R., Siller Carrillo, H.R., Lammel-lindemann, J.A., Rodriguez, C.A. (2018). Surface Finish and Back-Wall Dross Behavior during the Fiber Laser Cutting of AZ31 Magnesium Alloy. Micromachines. 1-15. mdpi.
• Garcia-Lopez, E., Medrano-Tellez, A., Ibarra, J., Siller, H.R., Rodriguez, C.A. (2018). Enhancement of Back Wall Dross and Surface Roughness in Fiber Laser Microcutting of 316L Miniature Tubes. Micromachines. 9 (1) 4. MDPI.
• Garcia, G.A., Vazquez, E.V., Siller Carrillo, H.R., Ruiz-Huerta, L., Caballero-Ruiz, A. (2017). Calibration of ball nose micro end milling operations for sculptured surfaces machining. International Journal of Machining and Machinability of Material. 19 (6) 587 - 605. Inderscience.
• Gameros, A., Axinte, D., Siller, H., Lowth, S., Winton, P. (2017). Experimental and Numerical Study of a Fixturing System for Complex Geometry and Low Stiffness Components. Journal of Manufacturing Science and Engineering. 139 (4) 1–12.
• Garcia-Ortiz, C.E., Santamaria, L., Siller, H.R. (2017). Interaction of near-field microscopy probes with surface plasmon polaritons. Journal of Optics. 19 IOP Publishing.
• Jiménez, I., López, C., Martinez-Romero, O., Mares, P., Siller, H.R., Diabb, J., Sandoval-Robles, J.A., Elías-Zúniga, A. (2017). Investigation of residual stress distribution in single point incremental forming of aluminum parts by X-ray diffraction technique. Other. 1–10. The International Journal of Advanced Manufacturing Technology. http://dx.doi.org/10.1007/s00170-016-9952-y
• Martínez-López, J.I., Betancourt, H.A., García-López, E., Rodriguez, C.A., Siller, H.R. (2017). Rapid fabrication of disposable micromixing arrays using xurography and laser ablation. Micromachines. 8 (5)
• Gameros, A., Lowth, S., Axinte, D.;, Nagy-Sochacki, A., Craig, O., Siller, H. (2017). State-of-the-art in fixture systems for the manufacture and assembly of rigid components: A review. International Journal of Machine Tools & Manufacture. 123 (July) 1–21. Elsevier Ltd. http://linkinghub.elsevier.com/retrieve/pii/S0890695517301116
• Segura-Cardenas, E., Ramirez-Cedillo, E., Sandoval-Robles, J., Ruiz-Huerta, L., Caballero-Ruiz, A., Siller Carrillo, H.R. (2017). Permeability study of austenitic stainless steel surfaces produced by selective laser melting. Metals. 7 (12) 521. MDPI.
• Coppel, R., Abellan-Nebot, J.V., Siller Carrillo, H.R., Rodriguez, C.A., Guedea, F. (2016). Adaptive control optimization in micro-milling of hardened steels - evaluation of optimization approaches. International Journal of Advanced Manufacturing Technology. 84 (9-12) 2219–2238.
• Figueroa-Cavazos, J.O., Flores-Villalba, E., Díaz-Elizondo, J.A., Martínez-Romero, O., Rodríguez, C.A., Siller Carrillo, H. (2016). Design Concepts of Polycarbonate-Based Intervertebral Lumbar Cages: Finite Element Analysis and Compression Testing. Applied Bionics and Biomechanics. 2016 (Article ID 7149182) 9.
• Olvera, D., Elias-Zuniga, A., Martinez-Romero, O., Lopez de Lacalle, L. N., Martinez-Alfaro, H., Siller Carrillo, H.R., Pineda, M.W. (2016). Improved predictions of the stability lobes for milling cutting operations of thin-wall components by considering ultra-miniature accelerometer mass effects. International Journal of Advanced Manufacturing Technology. 86 (5-8) 2139–2146.
• Anguiano-Sanchez, J., Martinez-Romero, O., Siller Carrillo, H.R., Diaz-Elizondo, J.A., Flores-Villalba, E., Rodriguez, C.A. (2016). Influence of PEEK Coating on Hip Implant Stress Shielding: A Finite Element Analysis. Computational and Mathematical Methods in Medicine. 2016
• Santamaria, L., Garcia-Ortiz, C.E., Siller Carrillo, H.R., Cortes, R., Coello, V. (2016). Optical method for distance and displacement measurements of the probe-sample separation in a scanning near-field optical microscope. AIP Advances. 6 (4) http://dx.doi.org/10.1063/1.4947114
• Martínez-López, J.I., Mojica, M., Rodríguez, C.A., Siller Carrillo, H.R. (2016). Xurography as a rapid fabrication alternative for point-of-care devices: Assessment of passive micromixers. Sensors. 16 (5) 1–21.
• Gameros, A., De Chiffre, L., Siller, H., Hiller, J., Genta, G. (2015). A reverse engineering methodology for nickel alloy turbine blades with internal features. Journal of Manufacturing Science and Engineering. 9 116–124. Elsevier.
• Silva, J.A., Abellán-Nebot, J.V., Siller, H.R., Guedea-Elizalde, F. (2014). Adaptive control optimisation system for minimising production cost in hard milling operations. International Journal of Computer Integrated Manufacturing. 27 (4) 348–360. Taylor & Francis.
• Lynn, N.S., Martínez-López, J.I., Bocková, M., Adam, P., Coello, V., Siller Carrillo, H.R., Homola, J. (2014). Biosensing enhancement using passive mixing structures for microarray-based sensors. Biosensors & Bioelectronics. 54 506–514.
• Elías-Zúniga, A., Baylón, K., Martínez-Romero, O., Rodríguez, C.A., Siller Carrillo, H.R. (2013). A nonmonotonous damage model to characterize mullins and residual strain effects of rubber strings subjected to transverse vibrations. Advances in Materials Science and Engineering. 2013
• Hernández-González, L.W., Pérez-Rodríguez, R., Zambrano-Robledo, P.C., Siller Carrillo, H.R., Toscano-Reyes, H. (2013). Estudio del rendimiento del torneado de alta velocidad utilizando el coeficiente de dimensión volumétrica de la fuerza de corte resultante. Other. 49 (4) 245–256. http://www.scopus.com/inward/record.url?eid=2-s2.0-84890077485&partnerID=tZOtx3y1
• Monroy-Vázquez, K.P., Attanasio, A., Ceretti, E., Siller Carrillo, H.R., Hendriqchs-Troeglen, N.J., Giardini, C. (2013). Evaluation of superficial and dimensional quality features in metallic micro-channels manufactured by micro-end-milling. Materials. 6 (4) 1434–1451.
• Márquez, J., Cortés, R., Siller Carrillo, H.R., Coello, V., Escamilla, D. (2013). Fuzzy logic scheme for tip-sample distance control for a low cost near field optical microscope. Other. 11 (6) 886–894. http://www.sciencedirect.com/science/article/pii/S1665642313715955
• Moreno, A.R., Castillo, L.E., Siller, H.R., Zúniga, A.E., González, Ciro A Rodríguez. (2013). Influence of CO2 Cooling on the Orthogonal Cutting of Elastomers. Other. 4 (5) 177–183.
• Cordova, R.K., Elias-Zuniga, A., Elizalde, L.E., Siller Carrillo, H.R., Sanchez, J.A., Rodriguez, C.A., Ortega, W. (2013). Polymeric materials reinforced with multiwall carbon nanotubes: A constitutive material model. Materials. 6 (7) 2873–2891.
• Elías-Zúniga, A., Montoya, B., Ortega-Lara, W., Flores-Villalba, E., Rodríguez, C.A., Siller Carrillo, H.R., Díaz-Elizondo, J.A., Martínez-Romero, O. (2013). Stress-softening and residual strain effects in suture materials. Advances in Materials Science and Engineering. 2013
• Cadena, N.L., Cue-Sampedro, R., Siller Carrillo, H.R., Arizmendi-Morquecho, A.M., Rivera-Solorio, C.I., Di-Nardo, S. (2013). Study of PVD AlCrN coating for reducing carbide cutting tool deterioration in the machining of titanium alloys. Materials. 6 (6) 2143–2154.
• Abellán-Nebot, J.V., Siller Carrillo, H.R., Vila, C., Rodríguez, C.A. (2012). An experimental study of process variables in turning operations of Ti-6Al-4V and Cr-Co spherical prostheses. International Journal of Advanced Manufacturing Technology. 63 (9-12) 887–902.
• Alvarado-Weigend, M., Zambrano, P.C., Guerrero, M.P., Siller Carrillo, H. (2012). Characterizing the Machinability of Yellow Brass Alloys. Other. 170 (11) 21–23. ASM International, Member/Customer Service Center Materials Park OH 44073-0002 United States.
• Vila, C., Siller Carrillo, H.R., Rodriguez, C.A., Bruscas, G.M., Serrano, J. (2012). Economical and technological study of surface grinding versus face milling in hardened AISI D3 steel machining operations. International Journal of Production Economics. 138 (2) 273–283. Elsevier. http://dx.doi.org/10.1016/j.ijpe.2012.03.028
• Arámbula, K., Siller, H., De Chiffre, L., Rodríguez, C., Cantatore, A. (2012). Evaluation of metrology technologies for free form surfaces. Other. 3 (1) 55–62. EDP Sciences.
• Jáuregui, A.L., Siller Carrillo, H.R., Rodríguez, C.A., Elías-Zúniga, A. (2010). Evaluation of micromechanical manufacturing processes for microfluidic devices. International Journal of Advanced Manufacturing Technology. 48 (9-12) 963–972.
• Nebot, J.V., Carrillo, H.R., Pastor, C.V., Gonzalez, Ciro A Rodriguez. (2010). Multi-objective optimisation of product quality in the manufacture of Ti-6Al-4V prostheses. Other. 5 (3) 353–369. Inderscience.
• Rodriguez, C.A., Siller, H.R., Garcia-Romeu, M.L. (2010). Neural network modelling of process parameters influence on tool wear for ball-nose end mills. Other. 3 (5-6) 393–404. Inderscience Publishers.
• Vila, C., Abellan-Nebot, J.V., Estruch, A.M., Siller Carrillo, H.R. (2009). Collaborative Product Development Experience in a Senior Integrated Manufacturing Course. International Journal of Engineering Education. 25 (5) 886–899.
• Siller Carrillo, H.R., Vila, C., Rodríguez, C.A., Abellán, J.V. (2009). Study of face milling of hardened AISI D3 steel with a special design of carbide tools. International Journal of Advanced Manufacturing Technology. 40 (1-2) 12–25.
• Siller Carrillo, H.R., Estruch, A., Vila, C., Abellan, J.V., Romero, F. (2008). Modeling workflow activities for collaborative process planning with product lifecycle management tools. Other. 19 (6) 689–700.
• Siller Carrillo, H.R., Rodriguez, C.A., Ahuett, H. (2006). Cycle time prediction in high-speed milling operations for sculptured surface finishing. Journal of Materials Processing Technology. 174 (1-3) 355–362.

Poster

• Robles, J., Siller Carrillo, H.R., Martinez-Lopez, J. (2018). Parametric Design of Cortical Bone Microstructure for in Silico Assessments. Atlanta, Biomedical Engineering Society.

Contracts, Grants and Sponsored Research

Contract

• Siller Carrillo, H.R., "America's Cutting Edge Provider," sponsored by Texas A&M Engineering Experiment Station, State, $70000 Funded. (2023 - 2024).
• Siller Carrillo, H.R., "America's Cutting Edge CNC Machining Training Program," sponsored by Department of Defense, Federal, $64375 Funded. (2022 - 2022).
• Siller, H., "Manufacturing of molds and characterization of Additive Manufacturing samples," sponsored by Tecnologico de Monterrey, International, Funded. (2018 - 2018).

Grant - Research

• Siller Carrillo, H.R., "Testbed for qualification procedures of additively manufactured stainless steel alloys," sponsored by Vice President for Research and Innovation - UNT, University of North Texas, $8000 Funded. (2020).
• Shen, M.H. (Principal), Siller Carrillo, H.R. (Co-Principal), "High-throughput Screening and Quality Assessment Testing and an AI-based In-Situ Process Monitoring and Quality Control Framework for Additive Manufacturing New Builds and Repaired Parts," sponsored by DOD, Federal, $800000 Funded. (2023 - 2027).
• Siller Carrillo, H.R. (Co-Principal), D'Souza, N.A. (Principal), Quintanilla, J. (Co-Principal), Ro, H. (Co-Principal), Huffman, D. (Co-Principal), Keathly, D. (Supporting), "Establishing a Journey of Inclusion, Identity and Intersectionality through Guided Pathways to Enhance Latinx Success in Engineering and Computer Science," sponsored by NSF, Federal, $799904 Funded. (2021 - 2024).
• Mishra, R.S. (Principal), Siller Carrillo, H.R. (Co-Principal), Haridas, R. (Co-Principal), "Solid-state Integrated Manufacturing Process for Lunar Environment (SIMPLE)," sponsored by NASA, Federal, $180000 Funded. (2023 - 2023).
• Burford, D.A. (Co-Principal), Manzo, M. (Co-Principal), Siller Carrillo, H.R. (Co-Principal), "Submerged Bobbin Tool (SBT) Tunneling Technology," sponsored by Advanced Materials and Manufacturing Processes Institute (AMMPI), National, $36450 Funded. (2021 - 2021).
• Siller, H.R. (Principal), Bostanci, H. (Co-Principal), Mirshams, R.A. (Co-Principal), Nasrazadani, S. (Co-Principal), "Evaluation of Hybrid Manufacturing Processes for Advanced Small Modular Reactor (SMR) Components," sponsored by Advanced Materials and Manufacturing Processes Institute, University of North Texas, $16960 Funded. (2020 - 2020).
• Siller Carrillo, H.R. (Principal), "Additive Manufacturing Interuniversity Program Initiative," sponsored by Department of State - Partners of the Americas, Federal, $24996 Funded. (2018 - 2020).
• Siller Carrillo, H.R. (Co-Principal), Golden, T.D. (Co-Principal), D'Souza, F. (Supporting), Mirshams, R.A. (Supporting), Nasrazadani, S. (Supporting), "Evaluation of Process Variables Effect on Mechanical Properties and Corrosion of SLM 316L and SL17-7 Parts," sponsored by Advanced Materials and Manufacturing Processes Institute, University of North Texas, $25000 Funded. (2019 - 2019).
• Siller Carrillo, H.R. (Co-Principal), Ro, H. (Co-Principal), Quintanilla, J.A. (Co-Principal), D'Souza, N.A. (Principal), Keathly, D.M., "Establishing a Journey of Inclusion, Identity and Intersectionality through Guided Pathways to Enhance Latinx Success in Engineering and Computer Science," sponsored by National Science Foundation, FED, Funded. (2021 - 2024).
• Siller Carrillo, H.R. (Principal), "Walkway Safety Research and Biomimetic Surfaces Development," sponsored by Walkway Management Group, IND, Funded. (2019 - 2022).
• Siller Carrillo, H.R. (Co-Principal), Dahotre, N.B. (Co-Principal), Banerjee, R. (Principal), "Additive Manufacturing of High Entropy Alloys," sponsored by Tosoh SMD, Inc., IND, Funded. (2019 - 2020).

Grant - Service

• Siller Carrillo, H.R., "Gene Haas Foundation grant to support scholarships, competition teams and ACE.," sponsored by Gene Haas Foundation, Private, $10000 Funded. (2023 - 2024).
• Anaya, L. (Principal), Siller, H. (Supporting), Manzo, M. (Supporting), "Denton County Boosting Engineering, Science, and Technology Program," sponsored by Best Buy, International, $7423 Funded. (2018 - 2020).
• Anaya, L. (Principal), Siller, H. (Supporting), Manzo, M. (Supporting), "Denton County Boosting Engineering, Science, and Technology Program," sponsored by Best Buy, International, Funded. (2018 - 2020).

Grant - Teaching

• Siller Carrillo, H.R. (Principal), "Additive Manufacturing Interuniversity Program Initiative," sponsored by Partners of the Americas, FOND, Funded. (2019 - 2020).

Sponsored Research

• Siller Carrillo, H.R. (Principal), "Walkway Safety Research and Biomimetic Surfaces Development," sponsored by Walkway Management Group, Private, $180000 Funded. (2019 - 2022).
• Manzo, M. (Principal), Siller Carrillo, H.R. (Co-Principal), Habib, A.T. (Supporting), "Embedded fiber optical sensing for autonomous vehicles," sponsored by Jim McNatt Institute for Logistics Research, University of North Texas, $10000 Funded. (2020 - 2021).
• Banerjee, R. (Principal), Dahotre, N.B. (Co-Principal), Siller Carrillo, H.R. (Co-Principal), "Additive Manufacturing of High Entropy Alloys," sponsored by Tosoh SMD, Inc, Private, $10000 Funded. (2019 - 2020).
• Siller, H.R. (Principal), "Slippery floor mitigation research," sponsored by Regan Scientific Instruments, Private, $15000 Funded. (2019 - 2019).
• Siller, H.R. (Principal), "Slippery floor mitigation research," sponsored by Regan Scientific Instruments, Private, Funded. (2019 - 2019).