Narendra B. Dahotre

Previous Scheduled Teaching

Published Intellectual Contributions

Abstracts and Proceedings

• D'Souza, N.A., Chhatbar, I.A., Dahotre, N.B., Berman, D., Chowdhury, T. (2019). Impedance Non-Contact based Multifunctional Polymer Sensor Textiles. 4. ASME.

Book

• Dahotre, N.B., Sharma, S. (2022). Laser-Based Additive Manufacturing: Modeling, Simulation, and Experiments. Other. John Wiley VCH.
• Dahotre, N.B., Joshi, S.S. (2016). Machining of bone and hard tissues. Springer.
• Dahotre, N.B. (2016). Machining of Bones and Hard Tissues. 181. Springer International Publishing.
• Dahotre, N.B. (2011). Laser Machining of Advanced Materials. 236. Nwe York, CRC Press-Taylor Francis Group.
• Dahotre, N.B. (2007). Laser Machining and Fabrication of Materials. 450. New York, Springer.
• N B Dahotre. (2007). Laser Machining and Fabrication of Materials pp. 450.
• Dahotre, N.B. (2006). Materials Science in Manufacturing. 628. New York, Academic/Elsevier.
• N B Dahotre. (2006). Materials Science in Manufacturing pp.628.
• Dahotre, N.B. (2006). · "Materials Science in Manufacturing", Academic/Elsevier, NY, 2006, pp. 628, ISBN: 0-7506-7716-3..
• Dahotre, N.B. (1999). Intermetallic and Ceramic Coatings. New York, Marcel Dekker.
• Dahotre, N.B. (1998). Lasers in Surface Engineering. Independent book edited by Prof Dahotre. 628. ASM International.

Book Chapter

• Dahotre, N.B., Sharma, S., Joshi, S., Banerjee, R. (2022). Directed Energy Deposition. Other. 23A Materials Park, Ohio, ASM International.
• Dahotre, N.B. (2016). Laser Surface Engineering for Tribology. American Society for Materials (ASM) Internationa.
• Dahotre, N.B. (2013). "Laser Surface Hardening", S. Santhanakrishnan Narendra B. Dahotre, ASM Handbook, Volume 4A, Steel Heat Treating Fundamentals and Processes , Editors: Jon Dossett and George E. Totten, pp. 1-26, American Society for Materials (ASM) International, Materials Park, Ohio, 2013..
• Dahotre, N.B. (2013). Laser Surface Hardening. American Society for Materials (ASM) Internationa.
• Narendra B. Dahotre and P.D. Kichambare. (2004). Encyclopedia of  Nanoscience and Nanotechnology, "Nanocrystalline Diamond".
• Arvind Agarwal and Narendra B. Dahotre, Editiors Narendra B. Dahotre and T.S. Sudarshan. (1999). Surface Preparation and Properties for Coating Deposition.
• V.V. Semak and Narendra B. Dahotre(editor). (1998). Laser Surface Texturing.
• Narendra B. Dahotre (Editor). (1998). Promise of Lasers: Past and Future in Materials Processing.

Cited Research

• Dahotre, N.B. (2023). 8 Non-invasive Density and Porosity Fraction Mapping of Bituminous Coal Using Ultrasound,. Department of Materials Science & Engineering
• Dahotre, N.B. (2023). Electrochemical Response of Heterogeneous Microstructure of Laser Directed Energy Deposited CoCrMo in Physiological Medium.
• Dahotre, N.B. (2023). Generative Adversarial Networks Assisted Machine Learning based Automated Quantification of Gain Size from Scanning Electron Microscope Back Scatter Images.
• Dahotre, N.B. (2023). Gradient Process Parameter Optimization in Additive Friction Stir Deposition of Aluminum Alloys.
• Dahotre, N.B. (2023). Influence of Energy Density on the Microstructure, Growth Orientation, and Anisotropy of Magnetic Properties in Additively Manufactured Fe-3.8wt%Si Transformer Steels. Not Hispanic or Latino, Department of Materials Science & Engineering
• Dahotre, N.B. (2023). Laser Based Additive Manufacturing of Tungsten: Multi Scale Thermo-1 Kinetic and Thermo-Mechanical Computational Model and Experiments. Department of Materials Science & Engineering
• Dahotre, N.B. (2023). Magnetic Response to Microstructure and Phase Evolution in Laser Thermal Treated FeSiB Amorphous Alloy.
• Dahotre, N.B. (2023). Microstructure Enhanced Biocompatibility in Laser Additively Manufactured CoCrMo Biomedical Alloy. Not Hispanic or Latino, Department of Materials Science & Engineering
• Dahotre, N.B. (2023). Multifunctional Phononic Meta-material actuated by the Phase Transition in Water.
• Dahotre, N.B. (2023). Non-Contacting Plant Health Monitoring via Ultrasound in Ambient Air. Department of Materials Science & Engineering
• Dahotre, N.B. (2023). Non-destructive Evaluation of Bulk Material Zones and Interfaces in Powder Bed Fusion Additive Manufactured Ti6Al4V.
• Dahotre, N.B. (2023). Surface Nanostructures Enhanced Biocompatibility and Osteoinductivity of Laser-Additively Manufactured CoCrMo Alloys. Department of Materials Science & Engineering
• Dahotre, N.B. (2023). Thermo-Mechanical Process Variables Driven Microstructure Evolution During Additive Friction Stir Deposition of IN625. Not Hispanic or Latino, Department of Materials Science & Engineering
• Dahotre, N.B. (2023). Towards the Next Generation of Machine Learning Models in Additive Manufacturing: A Review of Process Dependent Material Evolution. Department of Materials Science & Engineering
• Dahotre, N.B. (2023). Underlying Factors Determining Grain Morphologies in High-strength Titanium Alloys Processed by Additive Manufacturing. Not Hispanic or Latino, Department of Materials Science & Engineering
• Dahotre, N.B. (2023). “Laser powder bed fusion processing of a precipitation strengthenable FCC based high entropy alloy.

Conference Proceeding

• Joshi, S.S., Dahotre, N.B. (2017). Laser Surface Engineering for Tribology. ASM handbook. Vol. 18, Friction, lubrication, and wear technology. 661--687.
• Hayes, B.J., Ghamarian, I., Dixit, V., Joshi, S.S., Welk, B., Banerjee, R., Dahotre, N.B., Fraser, H., Collins, P.C. (2015). Characterization of electron beam additive manufactured TI-6AL-4V. SAMPE Baltimore Conference and Exhibition 2015.
• Lalitha R. Katipelli and Narendra B. Dahotre, Ed. David Roessler. (2000). Laser Surface Engineered Hard Coating on Aluminum.
• Narendra B. Dahotre, M.H. McCay and T. Dwayne McCay. (1995). Laser Induced Reaction Bonding of High Temperature Structural Ceramics.
• S. Gopinathan, Narendra B. Dahotre, Mary Helen McCay and T. Dwayne McCay. (1993). Carbide Formation During Laser Welding of SiC/Aluminum Composites.
• Narendra B. Dahotre, T. Dwayne McCay and Mary Helen McCa. (1993). Laser Induced Reaction Joining of Metal Matrix Composite.
• Narendra B. Dahotre, Santosh Gopinathan, Mary H. McCay, T. Dwayne McCay and C. Michael Sharp, Eds. E.W. Lee and N.J. Kim. (1991). An Evaluation of Strength of Pulsed Laser Welded SiC Particulates Reinforced Al-Alloy Metal Matrix Composite.
• Narendra B. Dahotre, M. H. McCay, T. D. McCay, C.M. Sharp, S. Gopinathan and L.F. Allard. (1991). Laser Welding of SiC/Al-alloy Metal Matrix Composite.
• M.H. McCay, T.D. McCay, C.M. Sharp and Narendra B. Dahotre, Ed. E.A. Loria. (1991). Laser Welding Techniques for Alloy 718.
• M.H. McCay, C.M. Sharp, M.G. Womack, T.D. McCay and Narendra B. Dahotre. (1991). The Effect of Laser Pulse Tailored Welding on Inconel 718.
• M.H. McCay, T.D. McCay, C.M. Sharp and Narendra B. Dahotre. (1990). Gas Assisted Heat Transfer Effects in Laser Welding Inconel 718.
• M.H. McCay, T.D. McCay , Narendra B. Dahotre, C.M. Sharp, A. Sedghinasab and S. Gopinathan. (1989). Laser Pulse Welding of Inconel 718.
• M.H. McCay, T.D. McCay, Narendra B. Dahotre, C.M. Sharp, A. Sedghinasab and S. Gopinathan. (1989). Laser Surface Melting and Alloying of Steel with Chromium.
• Narendra B. Dahotre, F. Fink, and K. Mukherjee. (1986). Some Aspects of the Microstructure Defects and Diffusion in Laser Surface Alloying of Steel .
• Narendra B. Dahotre, C. Wakade and K. Mukherjee, Eds. K. Mukherjee and J. Mazumder. (1985). Laser Melting and Microstructure of Metallic Glass.
• K. Mukherjee, C. Wakade and Narendra B. Dahotre, Eds. K. Mukherjee and J. Mazumder. (1985). Pulse Laser Induced Shear Band Formation in Metallic Glass.

Critical Review

• Dahotre, N.B. (2023). Behavioral Simulations and Experimental Evaluations of Stress Induced Spatial Nonuniformity of Dynamic Bulk Modulus in Additive Friction Stir Deposited AA 6061.
• Dahotre, N.B. (2023). Boosting Piezoelectricity by 3D Printing PVDF-MoS2 Composite as a Conformal and High-sensitivity Piezoelectric Sensor. Department of Materials Science & Engineering
• Parsazadeh, M., Sharma, S., Dahotre, N.B. (2023). Towards the next generation of machine learning models in additive manufacturing: A review of process dependent material evolution. 135 (2023) 43. Amsterdam, Elsevier. https://doi.org/10.1016/j.pmatsci.2023.101102

Editorial Material

• Conner, B., Essel, S., Paul, S., Wertheim, R., Pasang, T., Butcher, Dennis P., Jr., Zeidler, H., Dahotre, N.B., Pande, S., Banerjee, R., Cuesta-Lopez, S., Babcsan, N., Solomon, V. (2019). Technological Innovations in Metals Engineering. JOM. 71 (2) 651-654.

Journal Article

• Patil, S., Mani Krishna, K., Sharma, S., Joshi, S.S., Radhakrishnan, M., Banerjee, R., Dahotre, N.B. (2024). Thermo-mechanical process variables driven microstructure evolution during additive friction stir deposition of IN625. Additive Manufacturing.
• Dahotre, N.B., Mishra, R., Banerjee, R. (2023). 6 Hierarchical phase evolution during direct laser deposition of an in-situ Ni-NbC composite. Scripta Materialia. 226
• Shahzamanian, M., Banerjee, R., Dahotre, N.B., Srinivasa, A.R., Reddy, J. (2023). Analysis of stress shielding reduction in bone fracture fixation implant using functionally graded materials. Other. 117262. Elsevier.
• Radhakrishnan, M., McKinstry, M., Chaudhary, V., Nartu, M., Krishna, K.M., Ramanujan, R., Banerjee, R., Dahotre, N.B. (2023). Effect of chromium variation on evolution of magnetic properties in laser direct energy additively processed CoCrxFeNi alloys. Scripta Materialia. 226 115269. Pergamon.
• Mazumder, S., Palaniappan, S., Pantawane, M.V., Radhakrishnan, M., Patil, S.M., Dowden, S., Mahajan, C., Mukherjee, S., Dahotre, N.B. (2023). Electrochemical response of heterogeneous microstructure of laser directed energy deposited CoCrMo in physiological medium. Applied Physics A. 129 (5) 332. Springer Berlin Heidelberg Berlin/Heidelberg.
• Gaddam, S., Nartu, Mohan Sai Kiran Kumar Yadav, Chesetti, A., Mantri, S.A., Mishra, R.S., Dahotre, N.B., Banerjee, R. (2023). Hierarchical phase evolution during direct laser deposition of an in-situ Ni-NbC composite. Scripta Materialia. 226 115225. Pergamon.
• Varahabhatla, S.M., Nartu, Mohan Sai Kiran Kumar Yadav, Mantri, S.A., Chaudhary, V., Krishna, K.M., Joshi, S.S., Ramanujan, R.V., Dahotre, N.B., Banerjee, R. (2023). Influence of energy density on the microstructure, growth orientation, and anisotropy of magnetic properties in additively manufactured Fe-3.8 wt\% Si transformer steels. Materialia. 30 101854. Elsevier.
• Sharma, S., Krishna, K.M., Joshi, S.S., Radhakrishnan, M., Palaniappan, S., Dussa, S., Banerjee, R., Dahotre, N.B. (2023). Laser based additive manufacturing of tungsten: Multi-scale thermo-kinetic and thermo-mechanical computational model and experiments. Acta Materialia. 259 119244. Pergamon.
• Chesetti, A., Banerjee, S., Dasari, S., Varahabhatla, S., Sharma, A., Mantri, S.A., Nartu, Mohan Sai Kiran Kumar Yadav, Dahotre, N.B., Banerjee, R. (2023). Laser powder bed fusion processing of a precipitation strengthenable FCC based high entropy alloy. Other. 6 100140. Elsevier.
• Dahotre, N.B. (2023). Machine Learning Based De-noising of Electron Back Scatter Patterns of Various Crystallographic Metallic Materials Fabricated Using Laser Directed Energy Deposition. Not Hispanic or Latino, Department of Materials Science & Engineering
• Krishna, K.M., Madhavan, R., Pantawane, M.V., Banerjee, R., Dahotre, N.B. (2023). Machine learning based de-noising of electron back scatter patterns of various crystallographic metallic materials fabricated using laser directed energy deposition. Ultramicroscopy. 247 113703. North-Holland.
• Karri, M., Radhakrishnan, M., Pantawane, M., Banerjee, R., Dahotre, N. Machine learning based de-noising of electron back scatter patterns of various crystallographic metallic materials fabricated using laser directed energy deposition. Ultramicroscopy.
• Mckinstry, M., Joshi, S.S., Mani Krishna, K., Radhakrishnan, M., Dahotre, N.B. (2023). Magnetic response to microstructure and phase evolution in laser thermal treated FeSiB amorphous alloy. Journal of Applied Physics.
• Mazumder, S., Man, K., Radhakrishnan, M., Pantawane, M.V., Palaniappan, S., Patil, S.M., Yang, Y., Dahotre, N.B. (2023). Microstructure enhanced biocompatibility in laser additively manufactured CoCrMo biomedical alloy. Other. 150 213415. Elsevier.
• Dahotre, N.B., Sharma, S., Joshi, S., Radhakrishnan, M. (2023). Multiphysics Multi-scale Computational Framework for Linking Process-Structure-Property Relationships in Metal Additive Manufacturing: A Critical Review.
• Man, K., Mazumder, S., Dahotre, N.B., Yang, Y. (2023). Surface Nanostructures Enhanced Biocompatibility and Osteoinductivity of Laser-Additively Manufactured CoCrMo Alloys. ACS Omega. 8 (50) 47658--47666. American Chemical Society.
• Nartu, M.S., Welk, B.A., Mantri, S.A., Taylor, N.L., Viswanathan, G.B., Dahotre, N.B., Banerjee, R., Fraser, H.L. (2023). Underlying factors determining grain morphologies in high-strength titanium alloys processed by additive manufacturing. Nature Communications. 14 (1) 3288. Nature Publishing Group UK London.
• Stephen, A., Bhoyate, S., Cao, P., Advincula, R.C., Dahotre, N.B., Jiang, Y., Choi, W. (2022). 3D Printed Flexible Anode for High Performance Zinc Ion Battery. MRS Communications. 12 894.
• Joshi, S.S., Sharma, S., Radhakrishnan, M., Pantawane, M.V., Patil, S.M., Jin, Y., Yang, T., Riley, D.A., Banerjee, R., Dahotre, N.B. (2022). A multi modal approach to microstructure evolution and mechanical response of additive friction stir deposited AZ31B Mg alloy. Scientific Reports. 12 (1) 13234. Nature Publishing Group UK London.
• Dahotre, N.B., Joshi, S.S., Sharma, S. (2022). A new data-driven framework for prediction of molten pool evolution and lack of fusion defects in multi-track multi-layer laser powder bed fusion processes. International Journal of Advanced Manufacturing Technology.
• Dahotre, N.B., Sharma, S., Radhakrishnan, M., Joshi, S. (2022). A Pseudo Thermo-Mechanical Model Linking Process Parameters to Microstructural Evolution in Multilayer Additive Friction Stir Deposition of Magnesium Alloy. Materials & Design.
• Sharma, S., Krishna, K.M., Radhakrishnan, M., Pantawane, M.V., Patil, S.M., Joshi, S.S., Banerjee, R., Dahotre, N.B. (2022). A pseudo thermo-mechanical model linking process parameters to microstructural evolution in multilayer additive friction stir deposition of magnesium alloy. Other. 224 111412. Elsevier.
• Dahotre, N.B., Sharma, S., Joshi, S. (2022). A Universal Predictor-Based Machine Learning Model for Optimal Process Maps in Laser Powder Bed Fusion Process. Other.
• Joshi, S.S., Patil, S.M., Mazumder, S., Sharma, S., Riley, D.A., Dowden, S., Banerjee, R., Dahotre, N.B. (2022). Additive friction stir deposition of AZ31B magnesium alloy. Other. 10 (9) 2404--2420. Elsevier.
• Joshi, S.S., Sharma, A., Sharma, S., Mazumder, S., Pantawane, M.V., Mantri, S.A., Banerjee, R., Dahotre, N.B. (2022). Cyclic thermal dependent microstructure evolution during laser directed energy deposition of H13 steel. Transactions of the Indian Institute of Metals. 75 (4) 1007--1014. Springer India New Delhi.
• Dahotre, N.B., Radhakrishnan, M. (2022). Effect of Chromium Variation on Evolution of Magnetic Properties in Laser Direct Energy Additively Processed CoCrxFeNi Alloys. Scripta Materialia.
• Dahotre, N.B., Banerjee, R. (2022). Magnetic and Mechanical Properties of Additively Manufactured Alx(CoFeNi) Complex Concentrated Alloys. Scripta Materialia. (https://doi.org/10.1016/j.scriptamat.2022.115149)
• Jin, Y., Yang, T., Choi, T., Dahotre, N., Neogi, A., Krokhin, A. (2022). Polarization rotator for shear elastic waves. Applied Physics Letters. 121 (042201) Denton, 3940 N. Elm St. Suite F115N
• Dahotre, N.B., Choi, W., Jiang, Y. (2022). Recent Advances in 3D Printed Sensors: Materials, Design, and Manufacturing. Other. Wiley.
• Dahotre, N.B., Joshi, S.S. (2022). Tailored Surfaces on Biomedical Magnesium Alloys via Novel Beam and Friction Based Manufacturing Processes: A Review. Other.
• Mazumder, S., Pantawane, M.V., Patil, S., Radhakrishnan, M., Sharma, S., McKinstry, M., Dahotre, N. (2022). Thermokinetically Driven Microstructural Evolution in Laser‐Based Directed Energy‐Deposited CoCrMo Biomedical Alloy. Advanced Engineering Materials. 24 (11) 2200352.
• Dahotre, N.B. (2022). Ultrasonic Non-contact and Remote Monitoring of Plant Health in Air Ambient.. Other.
• Jiang, Y., Islam, M., He, R., Huang, X., Cao, P., Advincula, R.C., Dahotre, N., Dong, P., Wu, H., Choi, W. (2022). Recent Advances in 3D Printed Sensors: Materials, Design, and Manufacturing. Other. 2200492.
• Mantri, S.A., Nartu, M., Dasari, S., Sharma, A., Agarwal, P., Salloom, R., Sun, F., Ivanov, E., Cho, K., McWilliams, B., Srivilliputhur, S.G., Dahotre, N., Prima, Banerjee, R. (2021). Suppression and Reactivation of Transformation and Twinning Induced Plasticity in Laser Powder Bed Fusion Additively Manufactured Ti-10V-2Fe-3Al. Progress in Additive Manufacturing. No. 48 102406. Elsevier. https://www.sciencedirect.com/science/article/abs/pii/S2214860421005595
• Pantawane, M.V., Sharma, S., Sharma, A., Dasari, S., Banerjee, S., Banerjee, R., Dahotre, N.B. (2021). Coarsening of martensite with multiple generations of twins in laser additively manufactured Ti6Al4V. Acta Materialia. 213 116954. Pergamon.
• Mantri, S.A., Dasari, S., Sharma, A., Alam, T., Pantawane, M.V., Pole, M., Sharma, S., Dahotre, N.B., Banerjee, R., Banerjee, S. (2021). Effect of micro-segregation of alloying elements on the precipitation behaviour in laser surface engineered Alloy 718. Acta Materialia. 210 116844. Pergamon.
• Choi, T., Yang, T., Jin, Y., Squires, B., Dahotre, N., Neogi, A. (2021). In-situ monitoring and ex-situ elasticity mapping of laser induced metal melting pool using ultrasound: Numerical and experimental approaches. Journal of Manufacturing Processes. 71 178-186.
• Nartu, Mohan Sai Kiran Kumar Yadav, Flannery, D., Mazumder, S., Mantri, S.A., Joshi, S.S., Ayyagari, A.V., McWilliams, B., Cho, K., Dahotre, N.B., Banerjee, R. (2021). Influence of Process Parameters on Mechanical and Corrosion Behavior of DED-Processed Biomedical Ti-35Nb-7Zr-5Ta Alloy. JOM. 73 (6) 1819--1827. Springer US.
• Wu, T., Joshi, S.S., Ho, Y., Pantawane, M.V., Sinha, S., Dahotre, N.B. (2021). Microstructure and surface texture driven improvement in in-vitro response of laser surface processed AZ31B magnesium alloy. Other. Elsevier.
• Nartu, M., Dasari, S., Sharma, A., Mantri, S., Sharma, S., Pantawane, M.V., McWilliams, B., Cho, K., Dahotre, N.B., Banerjee, R. (2021). Omega versus alpha precipitation mediated by process parameters in additively manufactured high strength Ti--1Al--8V--5Fe alloy and its impact on mechanical properties. Materials Science and Engineering: A. 141627. Elsevier.
• NartuM., Pole, M., Mantri, S.A., Haridas, R.S., Scharf, T.W., McWilliams, B., Cho, K., Mukherjee, S., Dahotre, N.B., Banerjee, R. (2021). Process Induced Multi-layered Titanium – Boron Carbide Composites via Additive Manufacturing. Other. 46 102156.
• Nartu, M., Pole, M., Mantri, S., Haridas, R., Scharf, T., McWilliams, B., Cho, K., Mukherjee, S., Dahotre, N.B., Banerjee, R. (2021). Process induced multi-layered Titanium--Boron carbide composites via additive manufacturing. Other. 46 102156. Elsevier.
• Nartu, M., Pole, M., Mantri, S., Haridas, R., Scharf, T., McWilliams, B., Cho, K., Mukherjee, S., Dahotre, N.B., Banerjee, R. (2021). Process induced multi-layered Titanium--Boron carbide composites via additive manufacturing. Other. 46 102156. Elsevier.
• Pantawane, M.V., Sharma, S., Dasari, S., Mantri, S.A., Sharma, A., Banerjee, R., Banerjee, S., Dahotre, N.B. (2021). Spatial Variation of Thermokinetics and Associated Microstructural Evolution in Laser Surface Engineered IN718: Precursor to Additive Manufacturing. Metallurgical and Materials Transactions A. 52 (6) 2344--2360. Springer US.
• Shittu, J., Sadeghilaridjani, M., Pole, M., Muskeri, S., Ren, J., Liu, Y., Tahoun, I., Arora, H., Chen, W., Dahotre, N.B., others. (2021). Tribo-corrosion response of additively manufactured high-entropy alloy. Other. 5 (1) 1--8. Nature Publishing Group.
• Ji, X., Pole, M., Ho, T., Akhtar, M.A., Pantawane, M., Mukherjee, S., Dahotre, N.B. (2021). Tribology of rejuvenated CuZr-based amorphous alloys. Wear. 484 204018. Elsevier.
• Pantwane, M., Yang, T., Jin, Y., Joshi, S., Dasari, S., , A., Krokhin, A., Srivilliputhur, S.G., Banerjee, R., Neogi, A., Dahotre, N. (2021). Crystallographic texture dependent bulk anisotropic elastic response of additively manufactured Ti6Al4V. Scientific Reports. No. 11 633. https://www.nature.com/articles/s41598-020-80710-6
• Heo, H., Jin, Y., Yang, D., Wier, C., Minard, A., Dahotre, N.B., Neogi, A. (2021). Manufacturing and characterization of hybrid bulk voxelated biomaterials printed by digital anatomy 3d printing. Other. 13 (1) 1-10. https://api.elsevier.com/content/abstract/scopus_id/85098870586
• Pantawane, M.V., Ho, Y., Joshi, S.S., Dahotre, N.B. (2020). Computational assessment of thermokinetics and associated microstructural evolution in laser powder bed fusion manufacturing of Ti6Al4V alloy. Scientific Reports. 10 (1) 1--14. Nature Publishing Group.
• Chowdhury, T., D'Souza, N.A., Ho, Y.H., Dahotre, N.B., Mahbub, I. (2020). Embedded Corrosion Sensing with ZnO-PVDF Sensor Textiles. Sensors. 20 (11)
• Nartu, Mohan Sai Kiran Kumar Yadav, Mantri, S.A., Pantawane, M.V., Ho, Y., McWilliams, B., Cho, K., Dahotre, N.B., Banerjee, R. (2020). In situ reactions during direct laser deposition of Ti-B4C composites. Scripta Materialia. 183 28--32. Pergamon.
• Ho, Y., Joshi, S.S., Wu, T., Hung, C., Ho, N., Dahotre, N.B. (2020). In-vitro bio-corrosion behavior of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites. Materials Science and Engineering: C. 109 110632. Elsevier.
• Ho, Y., Man, K., Joshi, S.S., Pantawane, M.V., Wu, T., Yang, Y., Dahotre, N.B. (2020). In-vitro biomineralization and biocompatibility of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites. Bioactive Materials. 5 (4) 891--901. Elsevier.
• Ho, Y., Man, K., Joshi, S.S., Pantawane, M.V., Wu, T., Yang, Y., Dahotre, N. (2020). In-vitro biomineralization and biocompatibility of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites. Bioactive Materials. 5 (4) 891-901. Bioactive Materials. https://www.sciencedirect.com/science/article/pii/S2452199X20301006
• Kalakuntla, N., Bhatia, N., Patel, S., Joshi, S.S., Wu, T., Ho, Y., Dahotre, N.B. (2020). Laser patterned hydroxyapatite surfaces on az31b magnesium alloy for consumable implant applications. Materialia. 11 100693. Elsevier.
• Salloom, R., Joshi, S.S., Dahotre, N.B., Srivilliputhur, S.G. (2020). Laser surface engineering of B4C/Fe nano composite coating on low carbon steel: Experimental coupled with computational approach. Other. 190 108576. Elsevier.
• Wall, M.T., Pantawane, M.V., Joshi, S.S., Gantz, F., Ley, N.A., Mayer, R., Spires, A., Young, M.L., Dahotre, N.B. (2020). Laser-coated CoFeNiCrAlTi high entropy alloy onto a H13 steel die head. Surface and Coatings Technology. 387 125473. Elsevier.
• Yang, T., Jin, Y., Choi, T., Choi, T., Choi, T. (2020). Mechanically tunable ultrasonic metamaterial lens with a subwavelength resolution at long working distances for bioimaging. Smart Materials and Structures. 30 015022. Denton,
• Jin, Y., Yang, T., Heo, H., Krokhin, A., Shi, S.Q., Dahotre, N.B., Choi, T., Neogi, A. (2020). Novel 2D dynamic elasticity maps for inspection of anisotropic properties in fused deposition modeling objects. Other. 12 (9) 1966. Multidisciplinary Digital Publishing Institute.
• Jin, Y., Yang, t., Choi, T., Choi, T., Choi, T.Q., Choi, T., Choi, T., Choi, T. (2020). Novel 2D Dynamic Elasticity Maps for Inspection of Anisotropic Properties in Fused Deposition Modeling Objects. 12 (9) 1966. Polymers.
• Pantawane, M.V., Dasari, S., Mantri, S.A., Banerjee, R., Dahotre, N.B. (2020). Rapid thermokinetics driven nanoscale vanadium clustering within martensite laths in laser powder bed fused additively manufactured Ti6Al4V. Materials Research Letters. 8 (10) 383--389. Taylor \& Francis.
• Dahotre, N. (2020). Crystallographic Texture Dependent Bulk Anisotropic Elastic Response of Additively Manufactured Ti6Al4V. Scientific Reports.
• Dahotre, N. (2020). Reducing Coercivity by Chemical Ordering in Additively Manufactured Soft Magnetic Fe-Co (Hiperco) Alloys. Journal of Alloys and Compounds.
• Dahotre, N. (2020). Spatial Microstructural Anisotropy Response of Laser Powder Bed Additively Fused Ti6Al4V to Temperature Variation of Aqueous Electrolyte. Applied Physics A: Materials Science & Processing.
• Jin, Y., Shi, S.Q., Dahotre, N., Choi, T., Neogi, A. (2020). Novel 2D Dynamic Elasticity Maps for Inspection of Anisotropic Properties in Fused Deposition Modeling Objects. Polymer. 12
• Dahotre, N. (2020). Thermal Assessment of Ex vivo Laser Ablation of Cortical Bone. ACS Biomaterials Science & Engineering.
• Dahotre, N. (2020). Laser Fabrication of Structural Bone: Surface Morphology and Biomineralization Assessment. Lasers in Surgery and Medicine.
• Dahotre, N. (2020). Computational Assessment of Thermokinetics and Associated Microstructural Evolution in Laser Powder Bed Fusion Additive Manufacturing of Ti6Al4V Alloy. Scientific Reports.
• Nartu, M., Alam, T., Dasari, S., Mantri, S., Gorsse, S., Siller Carrillo, H.R., Dahotre, N.B., Banerjee, R. (2020). Enhanced Tensile Yield Strength in Laser Additively Manufactured Al0.3CoCrFeNi High Entropy Alloy. Materialia. 9 (2020) 100522.
• Dahotre, N. (2020). Magnetic and Mechanical Properties of an Additively Manufactured Equiatomic CoFeNi Complex Concentrated Alloy. Scripta Materialia. 87 30-36.
• Yang, T., Jin, Y., Choi, T.Y., Dahotre, N.B., Neogi, A. (2020). Mechanically tunable ultrasonic metamaterial lens with a subwavelength resolution at long working distances for bioimaging. Smart Materials and Structures. 30 (1) https://api.elsevier.com/content/abstract/scopus_id/85098629460
• Jin, Y., Yang, T., Heo, H., Krokhin, A., Shi, S.Q., Dahotre, N.B., Choi, T.Y., Neogi, A. (2020). Novel 2D dynamic elasticity maps for inspection of anisotropic properties in fused deposition modeling objects. Other. 12 (9) https://api.elsevier.com/content/abstract/scopus_id/85092531267
• Dahotre, N. (2019). Challenges and Advances in Osteotomy. 2 (1) 1-4.
• Kuo, P., Joshi, S.S., Lu, X., Ho, Y., Xiang, Y., Dahotre, N.B., Du, J. (2019). Laser coating of bioactive glasses on bioimplant titanium alloys. International Journal of Applied Glass Science. 10 (3) 307--320.
• Kuo, P., Joshi, S.S., Lu, X., Ho, Y., Xiang, Y., Dahotre, N.B., Du, J. (2019). Laser coating of bioactive glasses on bioimplant titanium alloys. International Journal of Applied Glass Science. 10 (3) 307--320. Wiley Online Library.
• Lu, J.Z., Joshi, S.S., Pantawane, M.V., Ho, Y., Wu, T., Dahotre, N.B. (2019). Optimization of biocompatibility in a laser surface treated Mg-AZ31B alloy. Materials Science and Engineering: C. 105 110028. Elsevier.
• Argade, G.R., Joshi, S.S., Ayyagari, A.V., Mukherjee, S., Mishra, R.S., Dahotre, N.B. (2019). Tribocorrosion performance of laser additively processed high-entropy alloy coatings on aluminum. Applied Physics A. 125 (4) 1--9. Springer Berlin Heidelberg.
• Argade, G.R., Joshi, S.S., Ayyagari, A.V., Mukherjee, S., Mishra, R.S., Dahotre, N.B. (2019). Tribocorrosion performance of laser additively processed high-entropy alloy coatings on aluminum. Applied Physics A. 125 (4) 1--9. Springer.
• Dahotre, N. (2019). Evolution of Surface Morphology of Er:YAG Laser-machined Human Bone. Lasers in Surgery and Medicine. (https://doi.org/10.1007/s10103-019-02927-w)
• Gu, J.J., Joshi, S.S., Ho, Y.Y., Wei, B.B., Huang, T.T., Lee, J.J., Berman, D., Dahotre, N.B., Aouadi, S. (2019). Oxidation-induced healing in laser-processed thermal barrier coatings. Thin Solid Films. 688 137481.
• Dahotre, N. (2019). 2. “Fundamentals of Three-dimensional Laser Machining of Structural Bone. Journal of Applied Physics. 126 (12490) 15.
• Dahotre, N. (2019). Optimization of Biocompatibility in Laser Surface Treated Mg-AZ31B Alloy. 105 (110028) 12.
• Dahotre, N., Mishra, R.S. (2019). Tribocorrosion Performance of Laser Additively Processed High Entropy Alloy Coatings on Aluminum. 125 (4) 272.
• Dahotre, N., Du, J. (2019). Laser Coating of Bioactive Glasses on Bioimplant Titanium Alloys. 10 (3) 307-320.
• Dahotre, N.B., Santhanakrishnan, S., Joshi, S.S., Khan, R.J., Fick, D.P., Robertson, W.B., Sheh, R.K., Ironside, C.N. (2018). Integrated experimental and computational approach to laser machining of structural bone. Other. 51 56--66. Elsevier.
• Pantawane, M.V., Joshi, S.S., Dahotre, N.B. (2018). Laser Beam Machining of Aluminum and Aluminum Alloys. Other. 2 519--541.
• Ley, N., Joshi, S.S., Zhang, B., Ho, Y., Dahotre, N.B., Young, M.L. (2018). Laser coating of a CrMoTaWZr complex concentrated alloy onto a H13 tool steel die head. Surface and Coatings Technology. 348 150--158. Elsevier.
• Kuo, P., Joshi, S.S., Lu, X., Ho, Y., Xiang, Y., Dahotre, N.B., Du, J. (2018). Laser coating of bioactive glasses on bioimplant titanium alloys. International Journal of Applied Glass Science.
• Joshi, S.S., Choudhuri, D., Mantri, S.A., Banerjee, R., Dahotre, N.B., Banerjee, S. (2018). Rationalizing surface hardening of laser glazed grey cast iron via an integrated experimental and computational approach. Materials & Design. 156 570-585.
• Joshi, S.S., Choudhuri, D., Mantri, S.A., Banerjee, R., Dahotre, N.B., Banerjee, S. (2018). Rationalizing surface hardening of laser glazed grey cast iron via an integrated experimental and computational approach. Other. 156 570--585. Elsevier.
• Dahotre, N. (2018). Integrated Experimental and Computational Approach to Laser Machining of Structural Bone. 51 56-66.
• Dahotre, N. (2018). Rationalizing Surface Hardening of Laser Surface Glazed Grey Cast Iron via an Integrated Experimental and Computational Approach. No. 156 (10) 570-585.
• Ley, N.A., Joshi, S.S., Zhang, B., Ho, Y., Dahotre, N.B., Young, M.L. (2018). Laser Coating of a CrMoTaWZr Complex Concentrated Alloy onto a H13 Tool Steel Die Head. Surface & Coatings Technology. 348 150-158. https://doi.org/10.1016/j.surfcoat.2018.02.038
• Dahotre, N. (2018). Tailoring Corrosion Resistance of Laser-cladded Ni/WC Surface by Adding Rare Earth Elements. 97 (9-12) 4043-4054.
• Joshi, S.S., Ghamarian, I., Samimi, P., Katakam, S., Collins, P.C., Dahotre, N.B. (2017). Crystallisation behaviour during tensile loading of laser treated Fe--Si--B metallic glass. Philosophical Magazine. 97 (7) 497--514. Taylor \& Francis.
• Wu, T., Ho, Y., Joshi, S.S., Rajamure, R.S., Dahotre, N.B. (2017). Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material. Other. 32 (4) 797--803. Springer.
• Dahotre, N.B. (2016). A Review of the Physiological and Histological Effects of Laser Osteotomy. 41 (1) 1-12.
• Dahotre, N.B. (2016). Additive Manufacturing via Surface Engineering. 68 (7) 1759.
• Joshi, S.S., Katakam, S., Singh Arora, H., Mukherjee, S., Dahotre, N.B. (2016). Amorphous coatings and surfaces on structural materials. Critical Reviews in Solid State and Materials Sciences. 41 (1) 1--46. Taylor \& Francis.
• Dahotre, N.B. (2016). Crystallization behavior during tensile loading of laser treated Fe-Si-B metallic glass.
• Dahotre, N.B., Mishra, R.S. (2016). Effect of friction stir processing on microstructure and mechanical properties of laser-processed Mg-4Y-3Nd alloy. 110 663-675.
• Dahotre, N.B. (2016). Effect of Laser Surface Melting on Microstructure and Corrosion Behavior of AZ31B Mg Bio-implant.
• Dahotre, N.B. (2016). In Situ Nanocrystallization-Induced Hardening of Amorphous Alloy Matrix Composites Consolidated by Spark Plasma Sintering. 68 (7)
• Dahotre, N.B., Banerjee, R. (2016). Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum. 68 (7)
• Vora, H.D., Rajamure, R.S., Roy, A., Srinivasan, S., Sundararajan, G., Banerjee, R., Dahotre, N.B. (2016). Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum. JOM. 68 (7) 1819–1829. Springer US.
• Dahotre, N.B. (2016). Laser Joining of Plain Carbon Steel Using Fe-based Amorphous Alloy Filler. 238 55-64.
• Joshi, S.S., Lu, J.Z., Dahotre, N.B. (2016). Optimization of laser thermal treatment of Fe--Si--B metallic glass. Journal of Manufacturing Processes. 24 31--37. Elsevier.
• Dahotre, N.B. (2016). Optimization of laser thermal treatment of Fe-Si-B metallic glass. 24 31-37.
• Dahotre, N.B., Mukherjee, S. (2016). Thermodynamics and Kinetics of Laser Induced Transformation in Zirconium based Bulk Metallic Glass. 432 (B) 237-242.
• Vora, H.D., Mridha, S., Katakam, S., Arora, H.S., Mukherjee, S., Dahotre, N.B. (2016). Thermodynamics and kinetics of laser induced transformation in zirconium based bulk metallic glass. Journal of Non-Crystalline Solids. 432 237--245. North-Holland.
• Dahotre, N.B., Mukherjee, S. (2015). Amorphous Coatings and Surfaces on Structural Materials. 1-45.
• Dahotre, N.B., Choi, W. (2015). Direct-deposited MoS2 Thin Film Electrodes for High Performance Supercapacitors. 3 24049-24054,.
• Dahotre, N.B. (2015). Dynamic Crystallization During Non-isothermal Laser Thermal Treatment of Fe-Si-B Metallic Glass. 48 (49)
• Joshi, S.S., Gkriniari, A.V., Katakam, S., Dahotre, N.B. (2015). Dynamic crystallization during non-isothermal laser treatment of Fe--Si--B metallic glass. Journal of Physics D: Applied Physics. 48 (49) 495501. IOP Publishing.
• Dahotre, N.B., Mukherjee, S. (2015). Effect of Iron on Enhancement of Magnetic Properties of Co-Fe Metallic Glasses. 46 (4) 1019-1023.
• Veligatla, M., Katakam, S., Das, S., Dahotre, N.B., Gopalan, R., Prabhu, D., Babu, D.A., Choi-Yim, H., Mukherjee, S. (2015). Effect of iron on the enhancement of magnetic properties for cobalt-based soft magnetic metallic glasses. Metallurgical and Materials Transactions A. 46 (3) 1019--1023. Springer US.
• Dahotre, N.B. (2015). Evolution of Surface Topography during Three-Dimensional Laser Machining of Structural Alumina: Integrated Experimental and Computational Approach. 19 (8) 49-58.
• Alam, T., Borkar, T., Joshi, S.S., Katakam, S., Chen, X., Dahotre, N.B., Ramanujan, R.V., Banerjee, R. (2015). Influence of niobium on laser de-vitrification of Fe--Si--B based amorphous magnetic alloys. Journal of Non-Crystalline Solids. 428 75--81. Elsevier.
• Dahotre, N.B., Banerjee, R. (2015). Influence of Niobium on Laser De-vitrification of Fe-Si-B Based Amorphous Magnetic Alloys. 428 75-81.
• Dahotre, N.B. (2015). Laser Additive High Entropy Alloy Coating on Aluminum: Corrosion Behavior. 142 122-125.
• Shon, Y., Joshi, S.S., Katakam, S., Rajamure, R.S., Dahotre, N.B. (2015). Laser additive synthesis of high entropy alloy coating on aluminum: Corrosion behavior. Materials Letters. 142 122--125. Elsevier.
• Dahotre, N.B., Srivilliputhur, S.G. (2015). Laser Alloyed Al - W Coatings on Aluminum for Enhanced Corrosion Resistance. 328 205-214.
• Rajamure, R.S., Vora, H.D., Srinivasan, S., Dahotre, N.B. (2015). Laser alloyed Al-W coatings on aluminum for enhanced corrosion resistance. Applied Surface Science. 328 205–214. North-Holland.
• Dahotre, N.B. (2015). Multiphysics Theoretical Evaluation of Thermal Stresses in Laser Machined Structural Alumina. 2 1-23.
• Dahotre, N.B. (2015). Tensile Behavior of Laser Treated Fe-Si-B Metallic Glass. 118.
• Joshi, S.S., Samimi, P., Ghamarian, I., Katakam, S., Collins, P.C., Dahotre, N.B. (2015). Tensile behavior of laser treated Fe-Si-B metallic glass. Journal of Applied Physics. 118 (16) 164904. AIP Publishing LLC.
• Dahotre, N.B., Mukherjee, S. (2015). Thermodynamics and Kinetics of Laser Induced Transformation in Zirconium based Bulk Metallic Glass. 432 (B) 237-242.
• Choudhary, N., Patel, M., Ho, Y., Dahotre, N.B., Lee, W., Hwang, J.Y., Choi, W. (2015). Directly deposited MoS2 thin film electrodes for high performance supercapacitors. Other. 3 (47) 24049-24054. Royal Society of Chemistry (RSC). http://dx.doi.org/10.1039/c5ta08095a
• Dahotre, N.B., Banerjee, R. (2014). Comparison of the Crystallization Behavior of Fe-Si-B-Cu and Fe-Si-B-Cu-Nb Based Amorphous Soft Magnetic Alloys. 3 Biotech. 45A 2998-3009.
• Dahotre, N.B., Banerjee, R. (2014). Improved Soft Magnetic Properties by Laser De-vitrification of Fe-Si-B Amorphous Magnetic Alloys. 122 155-158.
• Dahotre, N.B., Banerjee, R. (2014). Integrated Experimental and Theoretical Approach for Corrosion and Wear Evaluation of Laser Surface Nitrided Ti-6Al-4V Biomaterial in Physiological Solution. 37 (9) 153-164.
• Dahotre, N.B. (2014). Laser Assisted Fe-based Bulk Amorphous Coating: Thermal Effects and Corrosion. 604 266-272.
• Katakam, S., Joshi, S.S., Mridha, S., Mukherjee, S., Dahotre, N.B. (2014). Laser assisted high entropy alloy coating on aluminum: microstructural evolution. Journal of Applied Physics. 116 (10) 104906. AIP Publishing LLC.
• Dahotre, N.B., Mukherjee, S. (2014). Laser Assisted High Entropy Alloy: Coating on Aluminum: Microstructural Evaluation.
• Dahotre, S.N., Vora, H.D., Rajamure, R.S., Huang, L., Banerjee, R., He, W., Dahotre, N.B. (2014). Laser induced nitrogen enhanced titanium surfaces for improved osseo-integration. Annals of Biomedical Engineering. 42 (1) 50–61. Springer US.
• Dahotre, N.B. (2014). Laser Machining of Structural Alumina: Influence of Moving Laser Beam on the Evolution of Surface Topography. 3 Biotech. 1-4.
• Dahotre, N.B. (2014). Laser Patterning of Fe-Si-B Amorphous Ribbons in Magnetic Field.
• Dahotre, N.B. (2014). Laser Surface Alloying of AZ31B Mg Alloy for Bio Wettability.
• Rajamure, R.S., Vora, H.D., Gupta, N., Karewar, S., Srinivasan, S., Dahotre, N.B. (2014). Laser surface alloying of molybdenum on aluminum for enhanced wear resistance. Surface and Coatings Technology. Elsevier.
• Dahotre, N.B. (2014). Laser Surface Modification of molybdenum on aluminum for enhanced wear resistance. 258 337-342.
• Dahotre, N.B. (2014). MC3T3-E1 Osteoblast Adhesion to Laser Induced Calcium Phosphate Coating on Ti Alloy: an In Vitro Centrifugation Study. 1 (2) 71-83.
• Dahotre, N.B. (2014). Microstructure and Mechanical Properties of a Laser Coated TiB2/TiC/Al Layer on an Aluminum Alloy Substrate. 29 53-68.
• Katakam, S., Devaraj, A., Bowden, M., Santhanakrishnan, S., Smith, C., Ramanujan, R., Thevuthasan, S., Banerjee, R., Dahotre, N.B. (2014). Publisher’s Note:“Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study”[J. Appl. Phys. 114, 184901 (2013)]. Journal of Applied Physics. 115 (4) 049903. AIP Publishing.
• Dahotre, N.B. (2014). Structural Relaxation and Nanocrystallization Induced Laser Surface Hardening of Fe-based Bulk Amorphous Alloys. 3 Biotech. 66 (6) 1080-1087.
• Novak, T.G., Vora, H.D., Mishra, R.S., Young, M.L., Dahotre, N.B. (2014). Synthesis of Al0. 5CoCrCuFeNi and Al0. 5CoCrFeMnNi High-Entropy Alloys by Laser Melting. Metallurgical and Materials Transactions B. 45 (5) 1603–1607. Springer US.
• Dahotre, N.B., Mishra, R.S., Young, M.L. (2014). Synthesis of Al0.5CoCrCuFeNi and Al0.5CoCrFeMnNi High-entropy Alloys by Laser Melting.
• Vora, H.D., Rajamure, R.S., Soundarapandian, S., Srinivasan, S., Dahotre, N.B. (2013). Design and optimization of microstructure for improved corrosion resistance in laser surface alloyed aluminum with molybdenum. Other. 14 (8) 1421–1432. Springer Berlin Heidelberg.
• Vora, H.D., Rajamure, R.S., Soundarapandian, S., Srinivasan, S., Dahotre, N.B. (2013). Dilution of molybdenum on aluminum during laser surface alloying. Journal of Alloys and Compounds. 570 133–143. Elsevier.
• Katakam, S., Devaraj, A., Bowden, M., Santhanakrishnan, S., Smith, C., Ramanujan, R.V., Thevuthasan, S., Banerjee, R., Dahotre, N.B. (2013). Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study. Journal of Applied Physics. 114 (18) 184901. AIP.
• Santhanakrishnan, S., Kumar, N., Dendge, N., Choudhuri, D., Katakam, S., Palanivel, S., Vora, H., Banerjee, R., Mishra, R., Dahotre, N.B. (2013). Macro-and Microstructural Studies of Laser-Processed WE43 (Mg-Y-Nd) Magnesium Alloy. Metallurgical and Materials Transactions B. 44 (5) 1190–1200. Springer US.
• Arora, H.S., Xu, Q., Xia, Z., Ho, Y., Dahotre, N.B., Schroers, J., Mukherjee, S. (2013). Wettability of nanotextured metallic glass surfaces. Scripta Materialia. 69 (10) 732--735. Pergamon.
• Arora, H.S., Xu, Q., Xia, Z., Ho, Y., Dahotre, N.B., Schroers, J., Mukherjee, S. (2013). Wettability of nanotextured metallic glass surfaces. Scripta Materialia. 69 (10) 732-735.
• Dahotre, N.B. (2013). · " Laser Coating of Aluminum Alloy EN AW 6082-T651 with TiB2 and TiC: Mirostructure and Mechanical Properties", Dunja Ravnikar, Narendra B. Dahotre, Janez Grum, Applied Surface Science, doi.org/10.1016/j.apsusc.2013.06.089, 2013..
• Dahotre, N.B. (2013). · "Characterization of Nanocrystallization Behavior of Spark Plasma Sintered Fe48Cr15Mo14Y2C15B6 Bulk Amorphous Alloys Using Extended Q-Range Small Angle Neutron Scattering", Ashish Singh, Shravan Katakam, Jan Illavsky, Narendra B. Dahotre, Sandip P. Harimkar, J. Applied Physics, 114, 054903 (2013); doi: 10.1063/1.4817379 .*.
• Dahotre, N.B. (2013). · "Design and Optimization of Microstructure for Improved Corrosion Resistance of Laser Surface Alloyed Aluminum with Molybdenum", Hitesh D. Vora, Ravi Shankar Rajamure, S. Santhanankrishnan, S.G. Srinivasan, and Narendra B. Dahotre, International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 8, pp. 1421-1432, 2013..
• Dahotre, N.B. (2013). · "Dilution of Molybdenum on Aluminum during Laser Surface Alloying", H.D.Vora, R.S. Rajamure, S. S oundarapandian , S. G. Srinivasan, Narendra B. Dahotre, Journal of Alloys and Compounds, in press, March 12, 2013..
• Dahotre, N.B. (2013). · "Laser In-situ Synthesis of TiB2-Al Composite Coating for Improved Wear Performance, Surface Alloying of Molybdenum on Aluminum for Corrosion Protection" Shravan Katakam, Nan Asiamah, S. Santhanakrishnan, and Narendra Dahotre, Surface and Coatings Technology, http://dx.doi.org/10.1016/j.surfcoat.2013.09.047 , 2013. Related Links: http://dx.doi.org/10.1016/j.surfcoat.2013.09.047.
• Dahotre, N.B. (2013). · "Laser Induced Nitrogen Enhanced Titanium Surfaces for Improved Osseo-integration," Sanket N. Dahotre, Hitesh D. Vora, Ravi Shanker Rajamure, Lu Huang, Rajarshi Banerjee, Wei He, Narendra B. Dahotre, Annals of Biomedical Engineering, DOI: 10.1007/s10439-013-0898-z, 2013.
• Dahotre, N.B. (2013). · "Laser Surface Modification of Alumina: Integrated Computational and Experimental Analysis", Marco A. Moncayo, Soundarapandian Santhanakrishnan, Hitesh D. Vora, Sameer R. Paital, and Narendra B. Dahotre, Ceramic International, dx.doi.org/10.1016/j.ceramint.2013.01.040, 2013.
• Dahotre, N.B. (2013). · "Macro and Microstructural Study of Laser Processed WE43 (Mg-Y-Nd) Magnesium Alloy", S. Santhankrishnan, N. Kumar, N. Dengde, D. Chaudhuri, S. Katakam, S. Palanivel, H.D. Vora, R. Banerjee, R.S. Mishra, and Narendra B. Dahotre, Metallurgical and Materials Transactions B, in press, May 15, 2013..
• Dahotre, N.B. (2013). · "Microstructure and Mechanical Properties of a Laser Coated TiB2/TiC/Al Layer on an Aluminum Alloy Substrate", D. Ravnikar, N.B. Dahotre, and J. Grum, Lasers in Engineering, Vol. 0, pp. 1-16, 2013..
• Dahotre, N.B. (2013). · "Multiscale Laser Materials Engineering: Energy-Efficient Processing and Materials Performance", Narendra B. Dahotre, Nanomaterials and Energy, Vol. 2, Issue NME2, pp. 69-75, 2013.
• Dahotre, N.B. (2013). · "One-dimensional Multi-pulse Laser Machining of Structural Alumina: Evolution of Surface Topography", Hitesh D Vora, S. Santhanakrishnan, Sandip P. Harimkar, Sandra K. S. Boetcher, and Narendra B. Dahotre, the International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-012-4709-8, 2013..
• Dahotre, N.B. (2013). · "Wettability of Nano-textured Metallic Glass Surfaces", Harpreet Singh Arora, Quan Xu, Zhenhai Xia, Yee-Hsien Ho, Narendra Dahotre, Jan Schroers, Sundeep Mukherjee, Scripta Materialia , http://dx.doi.org/10.1016/j.scriptamat.2013.08.014 , 2013. Related Links: http://dx.doi.org/10.1016/j.scriptamat.2013.08.014.
• Katakam, S., Hwang, J.Y., Vora, H., Harimkar, S.P., Banerjee, R., Dahotre, N.B. (2012). Laser-induced thermal and spatial nanocrystallization of amorphous Fe--Si--B alloy. Scripta Materialia. 66 (8) 538--541. Pergamon.
• Dahotre, N.B. (2012). · "Computational Modeling and Experimental Based Parametric Study of Multi-Track Laser Processing of Alumina", Marco A. Moncayo, Soundarapandian Santhanakrishnan, Hitesh D. Vora, Sameer R. Paital, and Narendra B. Dahotre, Optics and Laser Technology, http://dx.doi.org/10.1016/j.optlastec.2012.11.019 . Related Links: http://dx.doi.org/10.1016/j.optlastec.2012.11.019.
• Dahotre, N.B. (2012). · "Densification Behavior and Wear Response of Spark Plasma Sintered Iron-based Bulk Amorphous Alloys", Ashish Singh, Sameer R. Paital, Abhinay Andapally, Narendra B. Dahotre, Sandip P. Harimkar, Advanced Engineering Materials, Vol. 14, Issue 6, pp: 400-407, 2012 ..
• Dahotre, N.B. (2012). · "Evolution of Surface Topography in One-Dimensional Laser Machining Structural Alumina", H. D. Vora, S. Soundarapandian, S. P. Harimkar, S. K. S. Boetcher, and Narendra B. Dahotre, Journal of the European Ceramic Society, Vol. 32, Issue 16, pp: 4205-4218, 2012..
• Dahotre, N.B. (2012). · "Fe-Based Amorphous Coatings on AISI 4130 Structural Steel for Corrosion Resistance", Shravan Katakam, S. Santhanakrishnan, and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM) , Vol. 64, No. 6 , pp: 709-715, 2012. Related Links: http://www.springerlink.com/content/1047-4838/62/6/.
• Dahotre, N.B. (2012). · "Improved Corrosion and Wear Resistance of Mg Alloys via Laser Surface Modification of Al on AZ31B", Sameer R. Paital, Ananya Bhattacharya, Marco Moncayo, Yee Hsien Ho, Kristopher Mahdak, Soumya Nag, Rajarshi Banerjee, Narendra B. Dahotre, Surface Coating & Technology, Vol. 206, No. 8-9, pp. 2308-2315, 2012..
• Dahotre, N.B. (2012). · "In situ Laser Synthesis of Fe-based Amorphous Matrix Composite Coating on Structural Steel" Shravan Katakam, Sameer Paital, Junyeon Hwang, Rajarshi Banerjee, and Narendra Dahotre, Metallurgical and Materials Transactions A, Vol. 43, No. 13, pp: 4957-4966, 2012..
• Dahotre, N.B. (2012). · "Laser coating of hydroxyapatite on Mg for enhanced physiological corrosion resistance and biodegradability", S. Santhanakrishnan, Y. H. Ho and N. B. Dahotre, Materials Technology, DOI 10.1179/1753555712Y.0000000022 ..
• Dahotre, N.B. (2012). · "Laser-induced Thermal and Spatial Nanocrystallization of Amorphous Fe–Si–B Alloy", Shravana Katakam, Jun Y. Hwang, Hitesh Vora, Sandip P. Harimkar,Rajarshi Banerjee and Narendra B. Dahotre, Scripta Materialia, Vol. 66, pp. 538-542, 2012..
• Dahotre, N.B. (2012). · "Pulsed Laser Surface Modification of AZ31B Mg with Al-Si", Baoshuai Du, Sameer R. Paital, and Narendra B. Dahotre, Surface Review and Letters, Vol. 19, No. 5, (2012) 1250015, DOI: 10.1142/S0218625X12500151 ..
• Dahotre, N.B. (2012). · "Stress-Induced Selective Nano-crystallization in Laser Processed Amorphous Fe-Si-B Alloys", Shravana Katakam, S. Santhanakrishnan, Hitesh Vora, Junyeon Hwang, R. Banerjee, and N. B. Dahotre Philosophical Magazine Letters, Vol. 92, Issue 11, pp: 617-624, 2012..
• Dahotre, N.B. (2012). · "Synthesis of TiB2-TiC/Fe nano-composite coating by laser surface engineering", Baoshuai Du, Sameer R. Paital, and Narendra B. Dahotre, Optics & Laser Technology, in press, May 18, 2012..
• Dahotre, N.B. (2011). · " Electrochemical and Mechanical Behavior of Laser Processed Ti6Al4V Surface in Ringers Physiological Solution", Raghuvir Singh, S.K. Tiwari, Suman K. Mishra, and Narendra B. Dahotre, J. Materials Science: Materials in Medicine, Vol. 22, pp. 1787-1796, 2011..
• Dahotre, N.B. (2011). · " Periodically Laser Patterned Fe-B-Si Amorphous Ribbons: Phase Evolution and Mechanical Behavior" Sandip P. Harimkar, Sameer R. Paital, Gangyao Wang, Peter K. Liaw, Narendra B. Dahotre, Advance Engineering Materials, Vol. 13, No. 10, pp . 955-960, 2011..
• Dahotre, N.B. (2011). · "Absorptivity Transition in 1.06 μm Wavelength Laser Machining of Structural Ceramics", Anoop N. Samant and Narendra B. Dahotre, Int. J. Appl. Ceramic Technology, Vol. 8, Issue 1, pp: 127–139, January/February 2011..
• Dahotre, N.B. (2011). · "Laser Surface Modification for Synthesis of Controlled Textured Bioactive and Biocompatible Ca-P Coatings on Ti-6Al-4V", Sameer R. Paital, Nancy Bunce, Peeyush Nandwana, Chinmay Honrao, Soumya Nag, Wei He, Raj Banerjee, Narendra B. Dahotre, Journal of Materials Science: Materials in Medicine, Vol.22, No.6, pp. 1393-1406, 2011 ..
• Dahotre, N.B. (2011). · "Osteoblast Interaction with Laser Cladded HA and SiO2-HA Coating on Ti-6Al-4V" Yuling Yang, Kaan Serpersu, Wei He, Sameer R Paital, and Narendra B Dahotre, Materials Science and Engineering C, Vol. 31, pp. 1643-1652, 2011..
• Dahotre, N.B. (2011). · "Wear Behavior of Plasma Electrolytic Oxidation (PEO) and Hybrid Coatings of PEO and Laser on MRI 230D Magnesium Alloy", G. Rapheal, S. Kumar, C. Blawert and Narendra B. Dahotre, Wear, Vol. 271, Issues 9-10, pp. 1987-1997, 2011 Related Links:.
• Anoop N. Samant, Baoshuai Du and Narendra B. Dahotre. (2010). Three-Dimensional Laser Machining of Structural Ceramics.
• Narendra B Dahotre, Sameer R. Paital, Anoop N. Samant and Clau Daniel. (2010). Wetting Behavior of Laser Synthetic Micro Textures on Ti-6Al4V for Bioapplication.
• Sameer R. Paital, Zheng Cao, Wei He, Narendra B. Dahotre. (2010). Wetting Effects on In-vitro Bioactivity and In-vitro Biocompatibility of Laser Micro-textured Ca-P Coating.
• Dahotre, N.B. (2010). · "Effects of SiO2 Substitution on Wettability of Laser Deposited Ca-P Biocoating on Ti-6Al-4V" Yuling Yang, Sameer R Paital, Narendra B Dahotre, Journal of Materials Science: Materials in Medicine, Vol. 21, pp. 2511-2521, 2010..
• Dahotre, N.B. (2010). · "Fractal Approach to Laser Processed Surfaces", Anil Kurella and Narendra Dahotre, Advanced Engineering Materials , Vol. 12, Issue 6, pp: 517-521, 2010..
• Dahotre, N.B. (2010). · "Laser Process Effect on the Texture Evolution and Wetting Behavior in Implantable Ti-6Al-4V Alloys", Sameer R. Paital, Wei He, Claus Daniel, and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM) , Vol. 62, No. 6 , pp: 76-83, 2010. Related Links: http://www.springerlink.com/content/1047-4838/62/6/.
• Dahotre, N.B. (2010). · "Laser Pulse Dependent Micro Textured Calcium Phosphate Coatings for Improved Wettability and Cell Compatibility", Sameer R. Paital, Wei He, Narendra B. Dahotre, Journal of Materials Science: Materials in Medicine, Vol. 21, No. 7 , pp: 2187-2200, 2010 . Related Links: http://www.springerlink.com/content/0957-4530/21/7/.
• Dahotre, N.B. (2010). · "Wetting and in Vitro Bioactivity of Laser Processed CaP Coating with Presence and Variation of SiO2 on Ti-6Al-4V" Yuling Yang, Sameer R Paital, Narendra B Dahotre, Materials Technology: Advanced Performance Materials, Vol.25, No.3-4, pp.137-142, 2010..
• Dahotre, N.B. (2010). · "Wetting Effects on In-vitro Bioactivity and In-vitro Biocompatibility of Laser Micro-textured Ca-P Coating", Sameer R. Paital, Zheng Cao, Wei He, Narendra B. Dahotre, Biofabrication, Vol. 2, No. 2, pp. 1-14, 2010.
• Sameer R. Paital and Narendra B. Dahotre. (2009). A Thermal Model for Laser Interaction  with Thick Dielectric Film on Metallic Substrate: Application to Ca-P Layer on Ti Alloy.
• Anoop N. Samant and Narendra B. Dahotre. (2009). Absorptivity Transition in 1.06 μm Wavelength Laser Machining of Structural Ceramics.
• Anoop N. Samant, and Narendra B. Dahotre. (2009). An Integrated Computational Approach to Single Dimensional Laser Machining  of  Magnesia.
• Sameer R. Paital and Narendra B. Dahotre. (2009). Calcium Phosphate Coatings for Bio Implant Applications: Materials, Performance Factors, and Methodologies.
• Anoop N. Samant, Claus Daniel, Ron H Chand, Craig A Blue and Narendra B. Dahotre. (2009). Computational Approach  to Photonic Drilling of Silicon Carbide.
• Anoop N. Samant and Narendra B. Dahotre. (2009). Differences in Physical Phenomena Governing Laser Machining  of Structural Ceramics.
• Sandip P. Harimkar, Edward A. Kenik, Sanghoon Shim, and Narendra B. Dahotre. (2009). Faceted Surface Grain Morphology of Rapidly Solidified Alumina: Characterization and Potential Applications.
• Anoop N. Samant, Baoshuai Du and Narendra B Dahotre. (2009). In-situ Absorptivity Prediction during 1.06 μm Wavelength Laser Low Aspect Ratio Machining of Structural Ceramics.
• Anoop N. Samant and Narendra B. Dahotre. (2009). Laser Machining of Structural Ceramics: A Review.
• Y. Chen, A. Samant, K. Balani, Narendra B. Dahotre, A. Agarwal. (2009). Laser Melting  of Plasma Sprayed Aluminum Oxide Coatings Reinforced with Carbon Nanotubes.
• M. Hazra, A.K. Mondal, S. Kumar, C. Blawert, and Narendra B. Dahotre. (2009). Laser Surface Cladding of MRI 153M Magnesium Alloy with (Al+Al2O3).
• Anil K. Kurella, Anoop N Samant and Narendra B. Dahotre. (2009). Laser Surface Multilevel Self Assembly of CaP-TiO2 Particles.
• Sandip P. Harimkar and Narendra B. Dahotre. (2009). Microindentation Fracture Behavior of Laser Surface Modified Alumina Ceramic.
• Sandip P. Harimkar, Sameer R. Paital, Ashish Singh, Robert Aaland and Narendra B. Dahotre. (2009). Microstructure and Properties of Spark Plasma Sintering of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass.
• Anoop N. Samant and Narendra B. Dahotre. (2009). Physical Effects of Multipass Two Dimensional Laser Machining of Structural Ceramics.
• Anoop N. Samant and Narendra B. Dahotre. (2009). Physical Effects of Multipass Two-Dimensional  Laser Machining  of Structural Ceramics.
• Anoop N. Samant, Baoshuai Du, Sameer R. Paital, Subodh Kumar and Narendra B. Dahotre. (2009). Pulsed Laser Surface Treatment  of Magnesium: Correlation between Thermal Model and Experimental Observations.
• Sandip P. Harimkar, Narendra B. Dahotre. (2009). Rapid Surface Microstructuing  of Porous Alumina Ceramic Using Continuous Wave Nd:YAG Laser.
• Sameer R. Paital and Narendra B. Dahotre. (2009). Wettability and Kinetics of Hydroxyapatite Precipitation on Laser Textured Ca-P Bioceramic Coating.
• Anoop N. Samant and Narendra B. Dahotre. (2008). Ab initio Physical Analysis of Single Dimensional Laser Machining of Silicon Nitride.
• Anoop N. Samant and Narendra B. Dahotre. (2008). Computational  Predictions in Single-Dimensional Laser Machining of Alumina.
• Claus Daniel, Beth L. Armstrong, Narendra B. Dahotre. (2008). Controlled Evolution of Morphology and Microstructure in Laser Interference Structured Zirconia.
• A.K. Mondal, S. Kumar, C. Blawert and Narendra B. Dahotre. (2008). Effect of Laser Surface Treatment on Corrosion and Wear Resistance of ACM720 Mg Alloy.
• Anil K. Kurella, Michael Z. Hu, and Narendra B. Dahotre. (2008). Effect of Microstructural Evolution on Wettability  of Laser Coated Calcium Phosphate on Titanium Alloy.
• Sandip P. Harimkar and Narendra B. Dahotre. (2008). Influence of Laser Fluence on the Microstructure Evolution and Fractal Dimensions of Laser Surface Modified Alumina Ceramic.
• Sameer R. Paital and Narendra B. Dahotre. (2008). Laser Based Biomimetic and Bioactive Coatings.
• Raghuvir Singh, S. Ghosh Chowdhury, S.K. Tiwari and Narendra B. Dahotre. (2008). Laser Surface Processing of Ti6Al4V in Gaseous Nitrogen: Corrosion Performance in Physiological Solution.
• Anoop N. Samant and Narendra B. Dahotre. (2008). Multilevel Residual Stress Evaluation in Laser Surface Modified Alumina.
• Kantesh Balani, Sandip P. Harimkar, Anup Keshri, Yao Chen, Narendra B. Dahotre, Arvind Agarwal. (2008). Multiscale Wear of Plasma-sprayed Carbon-nanotube-reinforced Aluminum Oxide Nanocomposite Coating .
• Baoshuai Du and Narendra B. Dahotre. (2008). Phase Constituents and Microstructure of Laser Synthesized TiB2-TiC Reinforced Composite Coating on Steel.
• Anoop N. Samant, Sameer R. Paital and Narendra B. Dahotre. (2008). Process Optimization in Laser Surface Structuring of Alumina.
• Baoshuai Du, Anoop N. Samant, Sameer R. Paital, and Narendra B. Dahotre. (2008). Pulsed Laser Synthesis of Ceramic-Metal Composite Coating on Steel.
• Raghuvir Singh and Narendra B. Dahotre. (2007). Corrosion Degradation and Prevention by Surface Modification of Biometallic Materials .
• S.P. Harimkar and N.B. Dahotre. (2007). Laser Assisted Densification of Surface Porosity in Structural Alumina Ceramic.
• Anoop N. Samant, Sandip P. Harimkar and Narendra B. Dahotre. (2007). Laser Beam Operation Mode Dependent Grain Morphology of Alumina.
• M.J. Jackson, A. Khangar, X. Chen, G.M. Robinson, V. C. Venkatesh, Narendra B. Dahotre. (2007). Laser Cleaning and Dressing of Vitrified Grinding Wheels.
• A. Basu, A.N. Samant, S.P. Harimkar, J. Dutta Majumdar, I. Manna, and Narendra B. Dahotre. (2007). Laser Surface Cladding of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass on AISI 4041 Steel.
• Anoop N. Samant, Sandip P. Harimkar and Narendra B. Dahotre. (2007). Laser Surface Modifications of Advanced ceramics- A Modeling Approach.
• Sameer R. Paital and Narendra B. Dahotre. (2007). Laser Surface Treatment for Porous and Textured Ca-P Bio-Ceramic Coating on Ti-6Al-4V.
• P.B. Kadolkar, T.R. Watkins, J. Th. M. DeHosson, B.J. Kooi and Narendra B. Dahotre. (2007). State of Residual Stress in Laser Deposited Ceramic Composite Coatings on Aluminum Alloy.
• Sandip P. Harimkar, Anoop N. Samant, and Narendra B. Dahotre. (2007). Temporally Evolved Recoil Pressure Driven Melt Infiltration During Laser Surface Modifications of Porous Alumina Ceramic.
• Kantesh Balani, Yao Chen, Sandip P. Harimkar, and Narendra B. Dahotre, Arvind Agarwal. (2007). Tribological Behavior of Plasma Sprayed Carbon Nanotube Reinforced Hydroxyapatite-Coating in Physiological Solution.
• S. P. Harimkar, C. Daniel, C. Holzapfel, P. Leibenguth, F. Mucklich and Narendra B. Dahotre. (2007). Validation of Crystallographic Correlation for Faceted Morphology in Laser Surface Engineered Alumina Ceramic.
• Anoop N. Samant and Narendra B. Dahotre. (2006). Computational prediction of grain size during rapid laser surface modification of Al-O Ceramic.
• S. P. Harimkar and Narendra B. Dahotre. (2006). Crystallographic and Morphological Textures in Laser Surface Modified Alumina Ceramic.
• S. P. Harimkar and N.B. Dahotre. (2006). Effect of Laser Fluence on Surface Microstructure of Alumina Ceramic.
• D. Tao, C. Blue, N.B. Dahotre, R. Honaker, B.K. Parekh, P.G. Englemean, C. Zhao, H. Han. (2006). High-density-infrared Treatment of Mineral Processing Equipment for Enhanced Wear Resistance .
• Abhijeet Khangar, Narendra B. Dahotre, Mark J. Jackson, Grant M. Robinson. (2006). Laser Dressing of Alumina Grinding Wheels.
• Anil Kurella and Narendra B. Dahotre. (2006). Laser Induced Functionality Textured Bio-coating.
• Anil Kurella and Narendra B. Dahotre. (2006). Laser Induced Hierarchical Calcium Phosphate Structures.
• Anil Kurella and Narendra B. Dahotre. (2006). Laser Induced Multi-scale Textured Zirconia Coating on ti-6Al-4V.
• I. Manna, J. Dutta Majumdar, B. Remesh Chandra, S. Nayak and Narendra B. Dahotre. (2006). Laser Surface Cladding of Fe-B-C, Fe-B-Si and Fe-BC-Si-Al-C on Plain Carbon Steel.
• R. Singh, A. Kurella, and Narendra B. Dahotre. (2006). Laser Surface Modification of Ti-6Al-4V: Wear and Corrosion Characterization in Simulated Bio-fluids.
• Binay Singh, Atul Sheth, and Narendra B. Dahotre. (2006). Laser Synthesis of Palladium-Alumina Composite  Membranes for Production of High Purity  Hydrogen form Gasification .
• M.J. Jackson, G.M. Robinson, A. Khangar, E.A. Kenik and Narendra B. Dahotre. (2006). Microgrinding Hypereutectoid Steels Using Laser Modified Corundum Abrasive Materials.
• Kantesh Balani, Arvind Agarwal, and Narendra B. Dahotre. (2006). Molecular Modeling of Metastable FeB49 Phase Evolution in Laser Surface Engineered Coating.
• Claus Daniel and Narendra B. Dahotre. (2006). Phase Modulated Hierarchical  Surface Structures by Interfering  Laser Beams .
• S.P. Harimkar, A.N. Samant, A.A. Khangar and Narendra B. Dahotre. (2006). Prediction of Solidification Microstructure During Laser Dressing of Alumina Grinding Wheel Material.
• T. Laha, A. Agarwal and Narendra B. Dahotre. (2005). A Comparative Study to Estimate Effective Elastic Modulus of Laser Engineered Composite Boride Coating.
• Raghuvir Singh, Madhavi Martin and Narendra B. Dahotre. (2005). Influence of Laser Surface Modification on Corrosion Behavior of Stainless Steel 316L and Ti6Al4V in Simulated Body Fluid.
• A. Khangar, Edward A. Kenik and Narendra B. Dahotre. (2005). Microstructure and Microtexture in Laser-dressed Alumina Grinding Wheel Material.
• A. Khangar and Narendra B. Dahotreq. (2005). Morphological Modification in Laser Dressed Alumina Grinding Material for Microscale Grinding.
• S. Nayak and Narendra B. Dahotre. (2005). Nanocoating for Engine Application .
• S. Nayak, Hsin Wang, Edward A. Kenik, Ian M. Anderson and Narendra B. Dahotre. (2005). Observation of Exothermic Reaction  During Laser Assisted Iron Oxide Coating on Aluminum Alloy.
• Anshul Singh and Narendra B. Dahotre. (2005). Phase Evolution during Laser In-Situ Carbide Coating.
• Anil Kurella and Narendra B. Dahotre. (2005). Surface Modification for Bioimplants: The Role of Laser Surface Engineering.
• P. Gregory Engleman, Anil Kurella, Anoop Samant, Craig A. Blue and Narendra B. Dahotre. (2005). The Application of Laser-Induced Multi-Scale Surface Texturing.
• T. Lah, A. Agarwal and Narendra B. Dahotre. (2005). Thermal Transitions in Fe-Ti-Ce-C Quaternary System used as a Precursor During Laser In-Situ Carbide Coating.
• R. Singh and Narendra B. Dahotre. (2005). Tribology of Laser Modified Surface of Stainless Steel in Physiological Solution.
• Raghuvir Singh and Narendra B. Dahotre. (2005). Tribology of Laser Modified Surface of Stainless Steel in Physiological  Solution .
• S. Nayak, H.M. Meyers III and Narendra B. Dahotre. (2004). Auger Microscopy of Laser Induced Fe-oxide/Al Reaction Composite Coating.
• S. Najak, H.M.Meyers, III, and Narendra B. Dahotre. (2004). Auger Microscopy of Laser Induced Fe-oxide/Al Reaction Composite Coating.
• S.C. Kuiry, S. Wannaparhum, and Narendra B. Dahotre. (2004). In-situ Formation of Ni-alumina Nanocomposite During Laser Processing.
• Puja Kadolkar, H. Wang, T.R. Watkins and Narendra B. Dahotre. (2004). Infrared Thermography During Laser Surface Engineering of Ceramic Coating on Metal.
• S. Nayak, L. Reister and Narendra B. Dahotre. (2004). Instrumented Indentation Characterization of Laser- Remelted A319Al Alloy.
• Anshul Singh and Narendra B. Dahotre. (2004). Laser In-Situ Synthesis of Combinatorial Coating on Steel.
• Anshul Singh and Narendra B. Dahotre. (2004). Laser In-Situ Synthesis of Combinatorial Coating on Steel.
• S. Nayak and Narendra B. Dahotre. (2004). Nanosurfacing  for Engine Application .
• S. Nayak, H. Wang and Narendra B. Dahotre. (2004). Thermography During Laser Surface Melting of Cast Aluminum Alloys.
• Puja Kadolkar and Narendra B. Dahotre. (2003). Effect of Processing Parameters on the Cohesive Strength of Laser Surface Engineered Ceramic Coatings on Aluminum Alloys.
• S. Nayak and Narendra B. Dahotre. (2003). Instrumented Indentation Characterization of Laser Induced Fe3O4/Al Composite Coating.
• Narendra B. Dahotre, A. Khangar, M.J. Jackson and G.M. Robinson, and R. Moss. (2003). Laser Dressing of Vitrified Aluminum Oxide Grinding Wheels.
• S. Nayak, L. Reister, H.M. Meyer, III, and Narendra B. Dahotre. (2003). Micro-mechanical Properties of Laser Induced Iron Oxide-Aluminum Matrix Composite Coating.
• Arvind Agarwal, Narendra B. Dahotre, Laura Riester and T. S. Sudarshan. (2002). Elastic Modulus Pulse Electrode Deposited Composite Boride Coating Using Nanoindentation.
• A. Dasari, S. Nayak, R.D.K. Misra, O.O Popoola and Narendra B. Dahotre. (2002). Evaluation of Laser Surface Engineered Iron Oxide Coatings on Cast Aluminum Alloy for Wear Application.
• P.G. Engleman, Narendra B. Dahotre, C.A. Blue, D.C. Harper and R. Ott. (2002). High-Density Infrared Processing of WC/Ni-11P Cermet Coatings.
• Swapnil V. Shah and Narendra B. Dahotre. (2002). Laser Surface Engineered VC Coating for Extended Die Life.
• Narendra B. Dahotre. (2002). Laser Surface Engineering.
• Swapnil Shah and Narendra B. Dahotre. (2002). Microstructural and Tribological Characterization of Laser Engineered VC Coating on Tool/Die Steel.
• S. Nayak and Narendra B. Dahotre. (2002). The Laser Induced Combustion Synthesis of Iron Oxide Nanocomposite Coating on Aluminum.
• M.H. Staia, C. Sanchez, M.R. Cruz, A. Roman, J. Lesage, G. Mesmacque and Narendra B. Dahotre. (2002). Tungsten Laser Surface Alloying of A356 Al Alloy: Tribological Performance and Characterisation.
• Puja Kadolkar and Narendra B. Dahotre. (2002). Variation of Structure with Input Energy During Laser Surface Engineered Ceramic Coating on Aluminum Alloys.
• Arvind Agarwal and Narendra B. Dahotre. (2001). Deformation Behavior of Laser Surface Engineered Titanium Diboride Coating on Steel.
• Narendra B. Dahotre and S. Shah. (2001). High Temperature Oxidation of Laser Surface Engineered VC Coating on H13 Die Casting Die Steel.
• Narendra B. Dahotre, S. Nayak, and Oludele O. Popoola. (2001). Laser Assisted Iron Oxide Coating on Cast Al Alloy for Automotive Engine Application.
• Arvind Agarwal and Narendra B. Dahotre. (2001). Mechanical Characterization of the Interface in Laser Surface Engineered Composite Titanium Diboride Coating on Steel.
• Lalitha R. Katipelli and Narendra B. Dahotre. (2001). Mechanism of High Temperature Oxidation of Laser Surface Engineered TiC/Al Composite Coating on 6061 Al.
• Narendra B. Dahotre, P. Kadolkar and S. Shah. (2001). Refractory Ceramic Coatings: Processes, Systems and Wettability and Adhesion.
• M.H. Staia, M. Cruz, and Narendra B. Dahotre. (2001). Wear Resistance of a Laser Alloyed A-356 Aluminum/WC Composite.
• Arvind Agarwal and Narendra B. Dahotre. (2000). Comparative Wear in Titanium Diboride Coatings on Steel Using High Energy Density Processes.
• Arvind Agarwal and Narendra B. Dahotre. (2000). Elevated Temperature Oxidation of Laser Engineered Composite Boride Coating on Steel.
• Arvind Agarwal and Narendra B. Dahotre. (2000). Functionality of Laser Surface Engineered Composite Titanium Diboride Coating.
• Arvind Agarwal and Narendra B.Dahotre. (2000). In-situ Synthesis of Intermetallic and Ceramic Coatings using Pulse Electrode Surfacing.
• Lalitha R. Katipeilli, Arvind Agarwal and Narendra B. Dahotre. (2000). Interfacial Strength of Laser Surface Engineered TiC Cating on 6061 Al using Four-Point Bend Test.
• Arvind Agarwal and Narendra B. Dahotre. (2000). Laser Engineered Titanium Boride Coating.
• Arvind Agarwal and Narendra B. Dahotre. (2000). Mechanical Properties of Laser Engineered Composite Boride Coating on Steel: A Nanoindentation Approach.
• M.H. Staia, M. Cruz and Narendra B. Dahotre. (2000). Microstructural and Tribological Characterization of an A-356 Aluminum Alloy Superficially Modified by Laser Alloying.
• Anuradha Godavarty, Arvind Agarwal and Narendra B. Dahotre. (2000). Neural Networks in Studies on Oxidation  Behavior of Laser Surface Engineered Composite Boride Coating.
• H. Nomura, T. Tsukamoto and Narendra B. Dahotre and H. Shen. (2000). Surface Modification and Characterization  of Functional Oxide Ceramics using C02  Laser.
• M.H. McCay, N. Kennedy, J. H. Hopkins and Narendra B. Dahotre. (2000). Wear Enhancement of Aluminum by Laser Surface Alloying with Silicon.
• Arvind Agarwal, Narendra B. Dahotre, and L.F. Allard. (1999). Ceramic/Metal Interface in Laser Deposited Hard Refractory Composite Coating: Electron Microscopy Study.
• Arvind Agarwal and Narendra B. Dahotre. (1999). Evaluation of Laser Surface Engineered Boride Coating in Various Accelerated Corrosion and Oxidation Environments.
• Arvind Agarwal, Narendra B. Dahotre and T.S. Sudarshan. (1999). Evolution of Interface in Pulsed Electrode Deposited Titanium Diboride on Cooper and Steel.
• Kunal Ghosh, M.H. McCay and Narendra B. Dahotre. (1999). Formation of a Wear Resistant Surface on Al by Laser Aided In-situ Synthesis of MoSi2.
• Arvind Agarwal and Narendra B. Dahotre. (1999). Laser Deposited Titanium Diboride Coating for Protection of Molten Aluminum Handling Tools and Molds.
• Lalitha R. Katepelli, Arvind Agarwal and Narendra B. Dahotre. (1999). Laser Surface Engineered TiC Coating on 6061 Al Alloy: Microstructure and Wear.
• Arvind Agarwal and Narendra B.Dahotre. (1999). Laser Surface Engineering of Steel for Hard Refractory Ceramic Composite Coating.
• Narendra B. Dahotre, V. Semak, C. Xiao and M.H. McCay. (1999). Non-Vacuum Laser Deposition of Buffer Layers for Coated Conductors.
• Arvind Agarwal and Narendra B. Dahotre. (1999). Pulsed Electrode Surfacing of Steel with TiC Coating: Microstructure and Wear Properties.
• Narendra B. Dahotre and Arvind Agarwal. (1999). Refractory Ceramic Composite Coating via Laser Surface Engineering.
• Arvind Agarwal and Narendra B. Dahotre. (1999). Synthesis of Boride Coating on Steel using High Energy Density Processes: Comparative Study of Evolution of Microstructure.
• M.H. McCay, Narendra B. Dahotre, J.A. Hopkins and T.D. McCay. (1999). The Influence of Metals and Carbides During Laser Surface Modification  of Low Alloy Steel.
• M.H. McCay, Narendra B. Dahotre, J.A. Hopkins, T.D. McCay and M.A. Riley. (1999). The Influences of Metals and Carbides During Laser Surface Modification of Low Alloy Steel.
• W. Reitz and Narendra B. Dahotre. (1998). Diffusion  Bonding of Laser Surface Melted Ni-alloy Material.
• Narendra B. Dahotre, C. Xiao, W. Boss, M.H. McCay and T.D. McCay. (1998). Laser Induced Reaction  Coating of Ceramic on Ceramic Composite for Enhanced High Temperature Corrosion Resistance.
• Arvind Agarwal and Narendra B. Dahotre. (1998). Pulse Electrode Deposition of Superhard Boride Coatings on Ferrous Ally.
• M. Okutomi, T. Tsukamoto, S. Niki and Narendra B. Dahotre. (1997). Evaluation of Microstructure in BaTiO3 Thin Films Recrystallized by Laser.
• M. Okutomi, T. Tsukamoto, S. Niki and Narendra B. Dahotre. (1997). Evolution of Microstructure in BaTiO3 Thin Films Recrystallised by Laser.
• A. Kumar, H.L. Chan, U. Ekanayake, A. Wierzbicki, Narendra B. Dahotre, and S.C. Sikes. (1997). Laser Ablation Synthesis and Characterization of Nitride Coatings.
• A. Kumar, H.L. Chan and Narendra B. Dahotre. (1997). Structural and Hardness Studies of CNx/TiN Composite Coatings on Si(100) Substrate by Laser Ablation Method.
• Narendra B. Dahotre, C. Xiao, W. Boss, M.H. McCay, and T.D. McCay. (1995). High Temperature Ceramic Coating of Ceramic by Laser In-Situ Reaction Technique.
• Narendra B. Dahotre, Mary Helen McCay and T. Dwayne McCay. (1994). Diamand Materials for Electromagnetic Railguns.
• Mary Helen McCay, T. Dwayne McCay, Narendra B. Dahotre and C. Micheal Sharp. (1994). Effect of Particulate Loading on Heat and Mass Transfer during Laser Welding of Metal Matrix Composites.
• Narendra B. Dahotre, M.H. McCay and T. Dwayne McCay. (1994). Laser Induced Liquid Phase Reaction Synthesis Assisted Joining of Metal Matrix Composite.
• Narendra B. Dahotre, Mary Helen McCay and T. Dwayne McCay. (1993). Effect of Grain Structure on Phase Transformation Events in the Inconel 718.
• Narendra B. Dahotre, Mary Helen McCay, T. Dwayne McCay, Camden R. Hubbard, Wallace D. Porter and O.B. Cavin. (1993). Effect of Grain Structure on Phase Transformation Events in the Inconel 718.
• M.H. McCay, T.D. McCay, Narendra B. Dahotre, and C.M. Sharp. (1992). Gas Assisted Heat Transfer Effects in Laser Welding Inconel 718.
• Narendra B. Dahotre, M.H. McCay, T.D. McCay and M.M.Kim. (1992). Laser Transformation of Pb-Sb, Pb-Ca and Pb-Sb-Sn-As Alloys.
• Narendra B. Dahotre, Mary Helen McCay, T. Dwayne McCay and C. Michael Sharp, Eds: D. Belforte and M. Levitt,. (1992). Laser Treatment of Lead-Alloys for Battery Grid.
• M.H. McCay, Narendra B. Dahotre and C.M. Sharp. (1991). Fusion Zone Structures in Laser Welded Al-SiC Composites.
• Narendra B. Dahotre, Mary Helen McCay, T. D. McCay, S. Gopinathan and Lawrence F. Allard. (1991). Pulse Laser Processing of a SiC/Al-Alloy Metal Matrix Composite.
• Narendra B. Dahotre and K. Mukherjee. (1990). Development of Microstructure in Laser Surface Alloying of Steel with Chromium.
• Narendra B. Dahotre, T. Dwayne McCay and Mary Helen McCay. (1990). Laser Surface Modification of Zinc-Base Composites.
• Narendra B. Dahotre, T. Dwayne McCay and Mary Helen McCay. (1989). Laser Processing of SiC/Al-Alloy Metal Matrix Composite (MMC).
• Narendra B. Dahotre, Ann Hunter and K. Mukherjee. (1987). Laser Surface of W2 Tool Steel: Effects of Prior Heat Treatment.
• K. Mukherjee, Narendra B. Dahotre and C. Wakade. (1987). Shear Band Formation and Cracking of a Metallic Glass Irradiated with High Energy Laser Pulses.
• C. Wakade, Narendra B. Dahotre and K. Mukherjee. (1984). Damage in Aluminum, Zinc and Tin from a Nanosecond Electric Pulse Discharge.

Manuscript

• Dahotre, N.B. (2023). Defect-free Sound Insulator using Single Metal based Friction Stir Process Array.

Other

• Dahotre, N.B., Sohn, J., Joshi, S.S. (2020). Laser dimpled stent for prevention of restenosis. Google Patents.

Contracts, Grants and Sponsored Research

Contract

• Dahotre, N. (Principal), "Laser Shaping of Biological Hard Tissue and Bone: Fundamentals and Engineering," sponsored by Australian Institute of Robotics Orthopedics, International, $179384 Funded. (2017).
• Dahotre, N.B., "In-situ Spectroscopy for Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," sponsored by Army Research Laboratory-ARL, Federal, $150000 Funded. (2022 - 2023).
• Dahotre, N.B., "Innovative Alloy Coatings in Forging Die Applications," sponsored by DLA/BAA/FDMC, Local, $596911 Funded. (2021 - 2023).
• Voevodin, A.A. (Principal), Banerjee, R. (Co-Principal), Dahotre, N.B. (Co-Principal), "In-situ Spectroscopy for Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," sponsored by US Army Research Laboratory - ARL, Federal, $60000 Funded. (2020 - 2021).
• Voevodin, A.A. (Principal), Banerjee, R. (Co-Principal), Dahotre, N.B. (Co-Principal), "In-situ Spectroscopy for Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," sponsored by US Army Research Laboratory - ARL, Federal, $60000 Funded. (2019 - 2020).
• Dahotre, N. (Co-Principal), Mishra, R.S. (Principal), Reidy, R.F. (Co-Principal), Young, M.L. (Co-Principal), Banerjee, R. (Co-Principal), Scharf, T.W. (Co-Principal), Srivilliputhur, S.G. (Co-Principal), Du, J. (Co-Principal), Xia, Z. (Co-Principal), Mukherjee, S. (Co-Principal), Voevodin, A.A. (Co-Principal), "Technical Proposal for Advanced Ballistics Technology: A Mechanisms-based Approach to Designing Materials Systems for Enhanced Dynamic Performance," sponsored by US Army Research Laboratory, Federal, $2000000 Funded. (2018 - 2020).
• Mishra, R.S. (Principal), Banerjee, R. (Co-Principal), Dahotre, N.B. (Co-Principal), Du, J. (Co-Principal), Mukherjee, S. (Co-Principal), Reidy, R.F. (Co-Principal), Scharf, T.W. (Co-Principal), Srivilliputhur, S.G. (Co-Principal), Verbeck, G.F. (Co-Principal), Voevodin, A.A. (Co-Principal), Xia, Z. (Co-Principal), Young, M.L. (Co-Principal), "Technical Proposal for Advanced Ballistics Technology: A Mechanisms-based Approach to Designing Materials Systems for Enhanced Dynamic Performance," sponsored by US Army Research Laboratory - ARL, Federal, $1000000 Funded. (2018 - 2020).
• Voevodin, A.A. (Principal), Banerjee, R. (Co-Principal), Dahotre, N.B. (Co-Principal), "Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," sponsored by US Army Research Laboratory - ARL, Federal, $52484 Funded. (2018 - 2019).
• Dahotre, N. (Principal), Banerjee, R. (Co-Principal), Voevodin, A.A. (Co-Principal), "Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," sponsored by US Army Research Laboratory, Federal, $3890276 Funded. (2018 - 2019).
• Dahotre, N., Mukherjee, S., "Engineered Materials and Materials Design of Engineered Materials (EMMDEM); Tactical Shelters," sponsored by Army Research Office, Federal, $171166 Funded. (2017 - 2019).
• Voevodin, A. (Principal), Dahotre, N. (Co-Principal), Banerjee, R. (Co-Principal), Mishra, R. (Co-Principal), "Laser Depainting," sponsored by University of North Texas, Other, $229811 Funded. (2017 - 2017).
• Voevodin, A. (Principal), Banerjee, R. (Co-Principal), Dahotre, N. (Co-Principal), "In-situ Spectroscopy for Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," sponsored by US Army Research Laboratory - ARL, Federal, Funded. (2020 - 2021).
• Voevodin, A. (Principal), Banerjee, R. (Co-Principal), Dahotre, N. (Co-Principal), "In-situ Spectroscopy for Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," sponsored by US Army Research Laboratory - ARL, Federal, Funded. (2019 - 2020).
• Voevodin, A. (Principal), Banerjee, R. (Co-Principal), Dahotre, N. (Co-Principal), "Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," sponsored by US Army Research Laboratory - ARL, Federal, Funded. (2018 - 2019).
• Dahotre, N., Mukherjee, S., "Engineered Materials and Materials Design of Engineered Materials (EMMDEM); Tactical Shelters," sponsored by Army Research Office, Federal, Funded. (2017 - 2019).

Grant - Research

• Dahotre, N.B. (Co-Principal), "Design and Manufacture of Gradient Materials," sponsored by Office of Naval Research, Federal, $1032690 Funded. (2023 - 2028).
• Dahotre, N.B. (Co-Principal), "Research Training Pathway for Underrepresented Minority Students in Advancing Materials and Manufacturing for Fusion Power," sponsored by Department of Energy, Federal, $1080000 Funded. (2023 - 2026).
• Young, M.L. (Principal), Dahotre, N.B. (Co-Principal), "Evaluation of Alloy Coating Materials in Forging Die Applications," sponsored by DLA BAA, Federal, $596911 Funded. (2021 - 2024).
• Voevodin, A.A. (Principal), Banerjee, R. (Co-Principal), Dahotre, N.B. (Co-Principal), "In-situ monitoring of laser additive manufacturing processes with spectroscopic methods," sponsored by Army Research Laboratory, Federal, $150000 Funded. (2019 - 2023).
• Dahotre, N.B., "Center for Agile & Adaptive Additve Manufacturing," sponsored by State of Texas, Local, $20000000 Funded. (2019 - 2023).
• Dahotre, N. (Principal), "Center for Agile & Adaptive Additive Manufacturing (CAAAM)," sponsored by State of Texas, State, $10000000 Funded. (2019 - 2021).
• Dahotre, N.B. (Principal), Mukherjee, S. (Co-Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Title Removed - Export Controlled," sponsored by KRI at Northeastern, Federal, $110867 Funded. (2019 - 2020).
• Mukherjee, S. (Co-Principal), Dahotre, N.B. (Principal), Voevodin, A.A. (Co-Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Engineered Materials and Materials Design of Engineered Materials," sponsored by Northeastern University (Army Natick Subcontract), Federal, $1000000 Funded. (2018 - 2019).
• Dahotre, N.B. (Principal), Aouadi, S.M. (Co-Principal), Young, M.L. (Co-Principal), Voevodin, A.A., Berman, D., "Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," Federal, $452403 Funded. (2018 - 2019).
• Prasad, V. (Principal), Dahotre, N.B. (Co-Principal), , H.L. (Co-Principal), Omary, M.A. (Co-Principal), Banerjee, R. (Co-Principal), Scharf, T.W. (Co-Principal), "Modernization of Multi-scale Characterization, Analysis, and Synthesis Facility for Materials and Devices: Remote Access, Visualization, and Public Engagement," sponsored by National Science Foundation, Federal, $1046053 Funded. (2010 - 2013).
• Young, M.L. (Principal), Dahotre, N.B. (Co-Principal), "Innovative Alloy Coatings in Forging Die Applications.," sponsored by Advanced Technology International, NFP, Funded. (2021 - 2024).
• Voevodin, A.A. (Principal), Berman, D. (Principal), Young, M.L. (Principal), Dahotre, N.B. (Principal), Banerjee, R. (Principal), Mishra, R.S. (Principal), Aouadi, S.M. (Principal), "Advanced Manufacturing, Processing and Characterization of Light Weight and Adaptive Materials," sponsored by U.S. Army Research Laboratory, FED, Funded. (2018 - 2022).
• Du, J. (Co-Principal), Young, M.L. (Principal), Dahotre, N.B. (Co-Principal), Shepherd, N.D. (Principal), Banerjee, R. (Principal), Mishra, R.S. (Principal), Reidy, R.F. (Principal), Srivilliputhur, S.G. (Principal), Mukherjee, S. (Principal), Scharf, T.W. (Principal), Jiang, Y. (Principal), Xia, Z. (Principal), "Technical Proposal for Advanced Ballistics Technology: A Mechanisms-based Approach to Designing Materials Systems for Enhanced Dynamic Performance," sponsored by U.S. Army Research Laboratory, FED, Funded. (2018 - 2022).
• Dahotre, N. (Principal), "Center for Agile & Adaptive Additive Manufacturing (CAAAM)," sponsored by State of Texas, State, Funded. (2019 - 2021).
• Yu, C. (Co-Principal), Zhang, H. (Co-Principal), Dahotre, N.B. (Principal), Nasrazadani, S. (Co-Principal), Mukherjee, S. (Co-Principal), "Advanced Materials, Devices, and Structures for the Expeditionary Maneuver and Support (EMS) of Tactical shelters," sponsored by George J. Kostas Research Institute, IND, Funded. (2019 - 2020).
• Dahotre, N.B. (Principal), "Laser Shaping of Biological Hard Tissue and Bone: Fundamentals and Engineering," sponsored by Australian Institute of Robotic Orthopae, IND, Funded. (2016 - 2020).
• Krokhin, A. (Co-Principal), Neogi, A. (Principal), Dahotre, N.B. (Co-Principal), Choi, T. (Co-Principal), "Nondestructive remote sensing of additive manufactured material properties based on Ultrasonic Elastography," sponsored by CTL Medical, IND, Funded. (2019 - 2020).
• Dahotre, N. (Principal), Mukherjee, S. (Co-Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Title Removed - Export Controlled," sponsored by KRI at Northeastern, Federal, Funded. (2019 - 2020).
• Siller Carrillo, H.R. (Co-Principal), Dahotre, N.B. (Co-Principal), Banerjee, R. (Principal), "Additive Manufacturing of High Entropy Alloys," sponsored by Tosoh SMD, Inc., IND, Funded. (2019 - 2020).
• Mukherjee, S. (Co-Principal), Dahotre, N. (Principal), Voevodin, A. (Co-Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Engineered Materials and Materials Design of Engineered Materials," sponsored by Northeastern University (Army Natick Subcontract), Federal, Funded. (2018 - 2019).
• Voevodin, A.A. (Principal), Yu, C. (Principal), Zhang, H. (Principal), Dahotre, N.B. (Principal), Nasrazadani, S. (Principal), Mukherjee, S. (Principal), "Engineered Materials and Materials Design of Engineered Materials (EMMDEM); Tactical Shelters; NU Year 2," sponsored by Northeastern University, NFP, Funded. (2017 - 2019).
• Voevodin, A.A. (Principal), Yu, C. (Principal), Zhang, H. (Principal), Mishra, R.S. (Principal), Nasrazadani, S. (Principal), Mukherjee, S. (Principal), "Engineered Materials and Materials Design of Engineered Materials (EMMDEM): Tactical Shelters," sponsored by Northeastern University, NFP, Funded. (2016 - 2018).
• Voevodin, A.A. (Principal), Dahotre, N.B. (Co-Principal), Banerjee, R. (Co-Principal), Mishra, R.S. (Co-Principal), "Material Testing and Characterization in Support of Laser De-Painting Technologies," sponsored by University of Dayton, NFP, Funded. (2017 - 2017).
• Prasad, V. (Principal), Dahotre, N. (Co-Principal), , H.L. (Co-Principal), Omary, M.A. (Co-Principal), Banerjee, R. (Co-Principal), Scharf, T.W. (Co-Principal), "Modernization of Multi-scale Characterization, Analysis, and Synthesis Facility for Materials and Devices: Remote Access, Visualization, and Public Engagement," sponsored by National Science Foundation, Federal, Funded. (2010 - 2013).

Sponsored Research

• Banerjee, R. (Principal), Dahotre, N.B. (Co-Principal), Siller Carrillo, H.R. (Co-Principal), "Additive Manufacturing of High Entropy Alloys," sponsored by Tosoh SMD, Inc, Private, $10000 Funded. (2019 - 2020).