Faculty Profile

Seifollah Nasrazadani

Title
Professor
Department
Mechanical Engineering
College
College of Engineering
Professor
Mechanical and Energy Engineering
College of Engineering

    

Education

PhD, Louisiana State University, 1990.
Major: Engineering Science
MS, Louisiana State University, 1984.
Major: Mechanical Engineering
BS, Louisiana State University, 1982.
Major: Mechanical Engineering

Current Scheduled Teaching*

MSET 5900.702, Special Problems, Summer 2021

* Texas Education Code 51.974 (HB 2504) requires each institution of higher education to make available to the public, a syllabus for undergraduate lecture courses offered for credit by the institution.

Previous Scheduled Teaching*

MSET 5190.001, Corrosion Engineering Technology, Spring 2021 Syllabus SPOT
MEEN 5800.055, Selected Topics of Contemporary Interest in Mechanical Engineering, Spring 2021 Syllabus SPOT
MSET 5800.001, Studies in Engineering Technology, Spring 2021 SPOT
MEEN 4800.055, Topics in Mechanical & Energy Engineering, Spring 2021 Syllabus SPOT
MEET 4350.001, Heat Transfer Applications, Fall 2020 Syllabus SPOT
MEET 4900.001, Special Problems, Summer 10W 2020
MEET 4910.001, Special Problems, Summer 10W 2020
MSET 5190.001, Corrosion Engineering Technology, Spring 2020
ENGR 3450.001, Engineering Materials, Spring 2020 Syllabus
MEET 4350.001, Heat Transfer Applications, Fall 2019 Syllabus SPOT
MTSE 6940.511, Individual Research, Fall 2019
MSET 5950.706, Master's Thesis, Fall 2019
MSET 5150.001, Applications of Electron Microscopy and Failure Analysis, Spring 2019 SPOT
MSET 5950.706, Master's Thesis, Spring 2019
MEET 4350.001, Heat Transfer Applications, Fall 2018 Syllabus SPOT
MSET 5950.706, Master's Thesis, Fall 2018
MSET 5950.705, Master's Thesis, Summer 10W 2018
MSET 5950.706, Master's Thesis, Spring 2018
MSET 5930.703, Research Problems in Lieu of Thesis, Spring 2018
ENGR 2301.001, Statics, Spring 2018 Syllabus SPOT
MSET 5800.001, Studies in Engineering Technology, Spring 2018 SPOT
ENGR 3451.004, Engineering Materials Lab, Fall 2017 Syllabus SPOT
MEET 4350.001, Heat Transfer Applications, Fall 2017 Syllabus SPOT
MSET 5950.706, Master's Thesis, Fall 2017
MSET 5930.005, Research Problems in Lieu of Thesis, Fall 2017
MSET 5150.001, Applications of Electron Microscopy and Failure Analysis, Spring 2017 SPOT
ENGR 3451.101, Engineering Materials Lab, Spring 2017 Syllabus SPOT
ENGR 3451.102, Engineering Materials Lab, Spring 2017 Syllabus SPOT
MEEN 6950.734, Doctoral Dissertation, Fall 2016
ENGR 3451.006, Engineering Materials Lab, Fall 2016 Syllabus SPOT
MEET 4350.001, Heat Transfer Applications, Fall 2016 Syllabus SPOT
MEEN 5950.731, Masters Thesis, Fall 2016
ENGR 3450.001, Engineering Materials, Summer 10W 2016 Syllabus SPOT
MEEN 6940.734, Individual Research, Spring 2016
MSET 5950.706, Master's Thesis, Spring 2016
MEEN 5950.734, Masters Thesis, Spring 2016
MSET 5800.004, Studies in Engineering Technology, Spring 2016 SPOT
MSET 5150.001, Applications of Electron Microscopy and Failure Analysis, Fall 2015 SPOT
MEET 4350.001, Heat Transfer Applications, Fall 2015 Syllabus SPOT
MTSE 6940.611, Individual Research, Fall 2015
MSET 5950.706, Master's Thesis, Fall 2015
MEEN 5950.731, Masters Thesis, Fall 2015
MSET 5900.704, Special Problems, Fall 2015
MSET 5950.706, Master's Thesis, Spring 2015
MSET 5930.703, Research Problems in Lieu of Thesis, Spring 2015
MSET 5900.702, Special Problems, Spring 2015
MSET 5800.004, Studies in Engineering Technology, Spring 2015
MSET 5010.001, Graduate Seminar, Fall 2014
MEET 4350.001, Heat Transfer Applications, Fall 2014 Syllabus
MSET 5950.706, Master's Thesis, Fall 2014
MSET 5930.005, Research Problems in Lieu of Thesis, Fall 2014
MSET 5900.704, Special Problems, Fall 2014
ENGR 3450.001, Engineering Materials, Summer 10W 2014 Syllabus
ENGR 3451.001, Engineering Materials Lab, Summer 10W 2014 Syllabus
MSES 5900.701, Special Problems, Summer 5W1 2014
MSES 5150.001, Applications of Electron Microscopy and Failure Analysis, Spring 2014
MSES 5930.703, Research Problems in Lieu of Thesis, Spring 2014
ENGR 3450.001, Engineering Materials, Fall 2013 Syllabus
MEET 4350.001, Heat Transfer Applications, Fall 2013 Syllabus
MSES 5930.005, Research Problems in Lieu of Thesis, Fall 2013
MTSE 5920.020, Research Problems in Lieu of Thesis, Fall 2013
MTSE 5930.020, Research Problems in Lieu of Thesis, Fall 2013
MSES 5900.704, Special Problems, Fall 2013
MSES 5150.001, Applications of Electron Microscopy and Failure Analysis, Spring 2013
MSES 5150.301, Applications of Electron Microscopy and Failure Analysis, Spring 2013
ENGR 2302.001, Dynamics, Spring 2013
MTSE 6940.511, Individual Research, Spring 2013
MSES 5950.706, Master's Thesis, Spring 2013
MEET 4900.702, Special Problems, Spring 2013
MSES 5900.703, Special Problems, Spring 2013
ENGR 3450.001, Engineering Materials, Fall 2012 Syllabus
MEET 4350.001, Heat Transfer Applications, Fall 2012 Syllabus
MSES 5950.706, Master's Thesis, Fall 2012
MSES 5930.005, Research Problems in Lieu of Thesis, Fall 2012
MEET 4900.700, Special Problems, Fall 2012
ENGR 2302.003, Dynamics, Spring 2012 Syllabus
ENGR 3451.001, Engineering Materials Lab, Spring 2012 Syllabus
ENGR 3451.002, Engineering Materials Lab, Spring 2012 Syllabus
MTSE 6940.511, Individual Research, Spring 2012
MSES 5950.706, Master's Thesis, Spring 2012
MSES 5930.703, Research Problems in Lieu of Thesis, Spring 2012
ENGR 3450.001, Engineering Materials, Fall 2011 Syllabus
MEET 4350.001, Heat Transfer Applications, Fall 2011 Syllabus
MSES 5930.005, Research Problems in Lieu of Thesis, Fall 2011
ENGR 2302.001, Dynamics, Summer 5W2 2011 Syllabus
ENGR 2301.002, Statics, Summer 5W1 2011
MSES 5150.001, Applications of Electron Microscopy and Failure Analysis, Spring 2011
MSES 5150.301, Applications of Electron Microscopy and Failure Analysis, Spring 2011
ENGR 2302.001, Dynamics, Spring 2011 Syllabus
MTSE 6940.511, Individual Research, Spring 2011
MTSE 6940.611, Individual Research, Spring 2011
MSES 5950.706, Master's Thesis, Spring 2011
MEET 4900.702, Special Problems, Spring 2011
ENGR 3450.001, Engineering Materials, Fall 2010 Syllabus
MEET 4350.001, Heat Transfer Applications, Fall 2010 Syllabus
MSES 5950.706, Master's Thesis, Fall 2010
MSES 5950.715, Master's Thesis, Summer 10W 2010
MSES 5150.001, Applications of Electron Microscopy and Failure Analysis, Spring 2010
MEET 4920.700, Cooperative Education, Spring 2010
MSES 5950.706, Master's Thesis, Spring 2010
MEET 4790.001, Senior Design II, Spring 2010 Syllabus
MFET 4790.001, Senior Design II, Spring 2010 Syllabus
MFET 4790.301, Senior Design II, Spring 2010
ENGR 3450.001, Engineering Materials, Fall 2009
MEET 4350.001, Heat Transfer Applications, Fall 2009
MSES 5950.701, Master's Thesis, Fall 2009
MSES 5950.706, Master's Thesis, Fall 2009
MSES 5930.001, Research Problems in Lieu of Thesis, Fall 2009
MEET 4780.001, Senior Design I, Fall 2009
MFET 4780.001, Senior Design I, Fall 2009
MTSE 6940.531, Individual Research, Summer 10W 2009
MTSE 6940.541, Individual Research, Summer 10W 2009
MSET 5950.700, Master's Thesis, Summer 5W1 2009
MSET 5950.715, Master's Thesis, Summer 10W 2009
MEET 5150.001, Applications of Electron Microscopy and Failure Analysis, Spring 2009
MEET 4920.700, Cooperative Education, Spring 2009
MEET 5920.001, Research Problems in Lieu of Thesis, Spring 2009
MEET 4790.001, Senior Design II, Spring 2009
MEET 4790.301, Senior Design II, Spring 2009
MEET 4350.001, Heat Transfer Applications, Fall 2008
MEET 4780.001, Senior Design I, Fall 2008
MFET 4780.001, Senior Design I, Fall 2008
MTSE 5900.502, Special Problems in Materials Research, Fall 2008
ENGR 2301.001, Statics, Fall 2008
MSET 5950.700, Master's Thesis, Summer 5W1 2008
MEET 4920.700, Cooperative Education, Spring 2008
ENGR 2302.001, Dynamics, Spring 2008
MSET 5950.706, Master's Thesis, Spring 2008
MEET 4790.001, Senior Design II, Spring 2008
MEET 5900.701, Special Problems, Spring 2008
MEET 4920.700, Cooperative Education, Fall 2007
MEET 4350.001, Heat Transfer Applications, Fall 2007
MSET 5950.706, Master's Thesis, Fall 2007
MEET 4780.001, Senior Design I, Fall 2007
MFET 4780.001, Senior Design I, Fall 2007
MEET 4900.700, Special Problems, Fall 2007
MEET 4910.701, Special Problems, Fall 2007
MEET 5900.700, Special Problems, Fall 2007
MSET 5950.703, Master's Thesis, Summer 5W1 2007
ENGR 2301.001, Statics, Summer 5W1 2007
MEET 5150.001, Applications of Electron Microscopy and Failure Analysis, Spring 2007
MEET 4920.700, Cooperative Education, Spring 2007
MTSC 6950.009, Doctoral Dissertation, Spring 2007
MTSC 6940.011, Individual Research, Spring 2007
MSET 5950.706, Master's Thesis, Spring 2007
ELET 4790.001, Senior Design II, Spring 2007
MEET 4790.001, Senior Design II, Spring 2007
MEET 4790.301, Senior Design II, Spring 2007
MFET 4790.001, Senior Design II, Spring 2007
MFET 4790.301, Senior Design II, Spring 2007
MEET 4920.700, Cooperative Education, Fall 2006
MTSC 4920.047, Cooperative Education in Materials Science, Fall 2006
MTSC 6950.047, Doctoral Dissertation, Fall 2006
MEET 4350.001, Heat Transfer Applications, Fall 2006
MTSC 6940.057, Individual Research, Fall 2006
MSET 5950.706, Master's Thesis, Fall 2006
MTSC 5950.715, Master's Thesis, Fall 2006
MEET 4920.700, Cooperative Education, Summer 10W 2006
ENGR 2301.001, Statics, Summer 5W1 2006
MEET 4350.001, Heat Transfer Applications, Spring 2006
MTSC 6940.011, Individual Research, Spring 2006
MTSC 6940.031, Individual Research, Spring 2006
MTSC 6940.725, Individual Research, Spring 2006
MSET 5950.710, Master's Thesis, Spring 2006
MTSC 5950.011, Master's Thesis, Spring 2006
MEET 5810.001, Studies in Engineering Technology, Spring 2006
MEET 4350.001, Heat Transfer Applications, Fall 2005
MTSC 6940.010, Individual Research, Fall 2005
MSET 5950.710, Master's Thesis, Fall 2005
MEET 4910.701, Special Problems, Fall 2005
MEET 4920.700, Cooperative Education, Summer 5W2 2005
MSET 5950.709, Master's Thesis, Summer 5W1 2005
MEET 2900.700, Special Problems, Summer 5W2 2005
MEET 2900.700, Special Problems, Summer 5W1 2005
MEET 5900.700, Special Problems, Summer 5W2 2005
ENGR 2301.001, Statics, Summer 5W1 2005
MEET 4920.700, Cooperative Education, Spring 2005
MTSC 6940.725, Individual Research, Spring 2005
MEET 5800.001, Studies in Engineering Technology, Spring 2005
MEET 4920.700, Cooperative Education, Fall 2004
MEET 4350.001, Heat Transfer Applications, Fall 2004
MTSC 6940.025, Individual Research, Fall 2004
MTSC 6940.026, Individual Research, Fall 2004
MTSC 6940.028, Individual Research, Fall 2004
MSET 5950.710, Master's Thesis, Fall 2004

* Texas Education Code 51.974 (HB 2504) requires each institution of higher education to make available to the public, a syllabus for undergraduate lecture courses offered for credit by the institution.

Published Publications

Published Intellectual Contributions

Abstracts and Proceedings
Heydari, M., Sadat, H., Nasrazadani, S. (2018). High-Fidelity Propeller-Ice Interaction Studies using CFD- DEM-MBD Coupling. 63(13), . Atlanat, Georgia: American Physical Society.
Book Chapter
Nasrazadni, S. (2015). Modern Analytical Techniques and Materials Characterization in Failure Analysis. Handbook of Oil and Gas Industries. New York: Elsevier Publishing Company.
Nasrazadani, S. (2006). Textbook entitled "ADVANCED ELECTRONIC PACKAGING",(chapter 18, pp. 725-791) IEEE-Press, Wiley-Interscience 2006 NY, NY USA and simultaneously in Canada..
Conference Proceeding
Nasrazadani, S. (2020). Development of New Accelerated Corrosion Test for All-Aluminum Microchannel and Tube and Fin Heat Exchangers II- Chamber Study (1645-RP). Denton:.
Bostanci, H., Nasrazadani, S. (2019). Use of Direct Airside Economizers in Thermal Management of Data Centers: Opportunities and Challenges. Proc. IEEE ITherm 2019, Las Vegas, NV, May 28-31, 2019. https://doi.org/10.1109/ITHERM.2019.8757297
Heydari, M., Sadat Hosseini, H., Nasrazadani, S. (2019). CFD-DEM-MBD Coupling to Study Ice Impacts on Propellers in Arctic Regions. Rome, Italy:.
Heydari, M., Bagheri, A., Bostanci, H., Sadat Hosseini, H., Nasrazadani, S. (2018). Numerical Investigation on Simultaneous Effects of Surface Roughness and Variable Properties on Laminar Flow in Annular Tubes. IMECE2018.
Kayode, O., Rizvi, H., D'Souza, N., Nasrazadani, S., Sander, S., Hemmati, V., Argade, G. (2018). Bio-Inspired PBAT/LDH Coatings for Corrosion Protection. Houston Texas: NACE-International. www.nace.org
Nasrazadni, S., Sekar, S., Wang, X., Gamez-Rivas, F. Training Graduate Students in Utilization of Analytical Instruments in a Failure Analysis Course. New York: American Society of Engineering Education.
Nasrazadni, S., Nouri, A., Adhikari, P. (2016). Enhancement of Laboratory Experience by Addition of Advanced Techniques in Undergraduate Mechanical Engineering and Technology programs. New York: American Society of Engineering Education.
Nasrazadni, S. (2015). Advanced Analytical Techniques for Characterization of Rusted Steels. Houston Texas: National Association of Corrosion Engineers.
Nasrazadni, S., Gupta, N., Bastola, A. (2015). Flow Accelerated Corrosion of Welded Small Bore A106 Carbon Steel Pipe. (March), . Houston Texas: National Association of Corrosion Engineers.
Nasrazadani, S. (2011). Applications of Fourier Transform Infrared Spectrophotometry (FTIR) in Characterization of Construction Materials Proceedings of GEO-FRONTIERS 2011, March 13-16, 2011, Dallas Texas.
Nasrazadani, S. (2011). Comparison of DBU, NH3, DMA, ETA, and Morpholine Interactions with Ferrous Chloride Solution and Carbon Steel Surfaces.
Nasrazadani, S. (2011). Corrosion and Flame Retardant Polymer Coatings for Oilfield Applications Offshore Technology Conference, May 2-5, 2011, Houston Texas .
Nasrazadani, S. (2010). "A review of biodeterioration of concrete structures", Proceedings of International corrosion and exhibition conference, CORROSION 2010 NACE, March 14-18 San Antonio Texas USA..
Nasrazadani, S. (2010). An Investigation of Wire Breaks Created During Copper Wire-Drawing Manufacturing, Materials Science & Technology, October 17-21 2010 Houston Texas.
Nasrazadani, S. (2010). New Advanced Amine for Secondary Systems in Pressurized Water Reactor Plants, International Conference on water Chemistry of Nuclear Reactor systems, October 3-7 2010, Quebec City, Canada.
Nasrazadani, S. (2010). Under Insulation Corrosion of Piping Systems, Materials Science & Technology (MS&T 2010) , October 17-21 2010, Houston Texas.
Nasrazadani, S. (2009). "Factors influencing concrete-rebar bond failure in continually reinforced concrete pavements", 88th annual conference of Transportation Research Board of the National Academies, Washington DC, January 11-14, 2009, paper No. 09-0764..
Nasrazadani, S. (2008). Evaluation of DBU as Corrosion Inhibitor for Secondary Cycle of Pressurized water Reactors", CORROSION 2008, Paper No. 08363 NACE March 16-20, 2008 New Orleans LA..
Nasrazadani, S. (2007). "Lead (Pb2+) Adsorption on Magnetite (Fe3O4) at 200 ◦C", 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, August 19-23, 2007 Whistler, B.C. Canada.
Nasrazadani, S. (2007). Teaching Heat Transfer Through Industrial Partnership, 114th Annual Conference and Exhibition of the American Society of Engineering Education, Honolulu Hawaii, USA.
Nasrazadani, S. (2006). AC-impedance Spectroscopy for Studying the Effect of Amines on Alloy 600, Corrosion 2006, NACE paper #6406, March 12-16 San Diego CA, USA.
Nasrazadani, S. (2006). Secondary System Oxides and Laed at Comanche Peak, Proceedings of International Conference on water Chemistry of Nuclear Reactor Systems, Jeju Island, South Korea, Oct. 2006.
Nasrazadani, S. (2005). Quantitative Morphological Characterization of Deposits Formed in Secondary Side of Comanche Peak Steam Electric Station using Scanning Electron Microscopy, 12th International Conference on Environmental Degradation of Materials in Nuclear Systems-Water Reactors, August 14-18 2005, Salt Lake City, Utah USA..
Journal Article
Al-Shenawa, A., Argade, G., Chilukuri, A., D'Souza, N. A., Nasrazadani, S., Scharf, T. W., Banerjee, R. (2021). Effect of supercritical CO2 on salt water corrosion and wear resistance of bismaleimide coating filled with organophilic montmorillonite clay. Other. 1-18. Taylor & Francis. https://doi.org/10.1080/01694243.2021.1884353
Manzo, M., Ahmed, H., Nasrazadani, S. (2020). Study on emission spectral lines of hematite and magnetite for purity’s differentiation. AIP Advances. 10(10), . American Institute of Physics. https://aip.scitation.org/doi/full/10.1063/1.5143413
Nasrazadani, S. (2020). Development of New Accelerated Corrosion Test(s) for All-Aluminum Microchannel and Tube and Fin Heat Exchangers I-Comprehensive Literature Review. 126(1), 870 - 882. Atlanta GA: American Society of Heating, Refrigerating, and Air-conditioning Engineers. www.ashrae.org
Al Shenawa, A. A., Nasrazadani, S., D'Souza, N. A. (2020). Effects of Filler Type in Bismaleimide Matrix on Corrosion Resistance of Steel in Sea Salt.
Bostanci, H., Altalidi, S. S., Nasrazadani, S. (2018). Two-Phase Spray Cooling with HFC-134a and HFO-1234yf on Practical Enhanced Surfaces. Applied Thermal Engineering. 131, 150-158. Elsevier. http://dx.doi.org/10.1016/j.applthermaleng.2017.11.142
Nasrazadni, S., Akhtar, M., Patel, A., Ezell, C. (2018). Failure Analysis of API 5L (Grade B) Oil Field Separator Flowline Pipe. 18(4), 721-726. New York: ASM International.
Bagheri, A., Nasrazadani, S., Bostanci, H. (2017). Impact of Internal Pipe Grooves on Flow-Accelerated Corrosion of Small-Bore A-106 Carbon Steel Pipes. Journal of Failure Analysis and Prevention. 17(3), 417-425. Springer. http://dx.doi.org/10.1007/s11668-017-0237-z
Nasrazadani, S., Nagulakonda, V. V., Barnes, J., Garcia, A., Al-Shenawa, A., D’Souza, N. A. (2016). Effects of Heat Treatment Processes on Corrosion Resistance of Epoxy-Coated Rebar Steel. Journal of Failure Analysis and Prevention. 16(5), 896-901. Springer Nature. http://dx.doi.org/10.1007/s11668-016-0161-7
Nasrazadni, S., Eghtesa, R., Sudoi, E., Vupputuri, S., Ramsey, J., Ley, M. (2016). Application of Fourier transform infrared spectroscopy to Study Concrete Degradation Induced by Biogenic Sulfuric Acid. 49(5), 2025-2034. Elsevier Publishing Company.
Nasrazadni, S., Nakka, S. (2016). Characterization of Corrosion Products in RTPF and All-Aluminum Microchannel Heat Exchangers. Journal of Failure Analysis and Prevention. 16(2), 189-196. ASM International.
Xia, C., Shi, S. Q., Cai, L., Nasrazadani, S. (2015). Increasing inorganic nanoparticle impregnation efficiency by external pressure for natural fibers. Other. 69, 395-399.
Xia, C., Shi, S. Q., Cai, L., Nasrazadani, S. (2015). Increasing inorganic nanoparticle impregnation efficiency by external pressure for natural fibers. Other. 69, 395--399. Elsevier.
Vupputuri, S., Fathepure, B. Z., Wilber, G. G., Sudoi, E. K., Nasrazadani, S., Ley, M. T., Ramsey, J. D. (2015). Isolation of a sulfur-oxidizing Streptomyces sp from deteriorating bridge structures and its role in concrete deterioration. Other. 97, 128-134.
Xia, C., Shi, S., Cai, L., Nasrazadani, S. (2015). Increasing the Nanoparticle Loading Efficiency by Introducing External Pressure during the Inorganic Nanoparticle Impregnation Process for Natural Fibers. 69, 395-399. New York: Elsevier Publishing Company.
Nasrazadani, S., Springfield, T. (2014). Application of Fourier Transform Infrared Spectroscopy in Cement Alkali Quantification. 47, 1607 -1615. Frisco: Springer. 4459 Voyager Dr.
Huang, Z., Al-Saad, Q., Nasrazadani, S., Wu, F. (2014). Understanding and Optimizing the Geosynthetic-Reinforced Steep Slopes. Other. 19(T), 5793-5811.
Nasrazadani, S. (2012). Failure Analysis of Al 356-T6 Clutch Lever, Journal of Failure Analysis and Prevention, Vol. 12, pp. 24-29.
Nasrazadani, S. (2011). New Advanced Amine for Secondary Systems in Pressurized Water Reactor Plants, Power Plant Chemistry, Vol. 13, No. 4, pp. 216-224..
Nasrazadani, S. (2010). C Corrosion Resistance and In-Vitro Response of Laser-Deposited Ti-Nb-Zr-Ta Alloys for Orthopedic Implant Applications, Journal of Biomedical materials Research: Part A Vol. 94 A Issue 4, pp. 1251-1256..
Nasrazadani, S. (2010). Evaluation of DBU as a Corrosion Inhibitor for a Pressurized Water Reactor, Materials Performance Vol. 49, No. 9, pp. 49-51..
Nasrazadani, S. (2009). "Investigation of Failed Pin Carrier Plate for the Anti-Rotation Device in a Motor", Journal of Failure Analysis and Prevention, (2009) 9: 234-239..
Nasrazadani, S. (2009). Characterization of oxides on FAC suceptible small-bore carbon steel piping of a power plant, International Journal of Pressure Vessels and piping, 86 (2009) 845-852..
Nasrazadani, S. (2008). "Compatibility of DBU and Elastomeric Materials", CORROSION, Vol. 64, No. 11, (2008), pp. 871-877..
Nasrazadani, S. (2008). "Laboratory Experiment on Diamond Thin Film Deposition", Journal of Materials Education, Vol. 30 (5-6) (2008) pp. 397-406..
Nasrazadani, S. (2008). "Lead (Pb2+) Adsorption on Magnetite (Fe3O4) at 200 ◦C", Corrosion, Vol. 64, No. 6, pp. 509-516, 2008..
Nasrazadani, S. (2008). "Quantitative analysis of iron oxides using Fourier Transform Infrared Spectroscopy", Corrosion Science Vol. 50 (2008) pp. 2493-2497.
Nasrazadani, S. (2007). "Design and Construction of a Heat Exchanger Analyzer for an Undergraduate Thermal-Fluid Laboratory", International Journal of Engineering Education, Vol. 23, No. 3, pp. 618-628, 2007..
Nasrazadani, S. (2007). Effects of DBU, Morpholine, and DMA on Corrosion of Low Carbon Steel Exposed to Steam", Corrosion Science, Vol. 49, pp. 3024-3039, 2007..
Nasrazadani, S. (2006). "Study of Phase Transformation in Iron Oxides Using Laser Induced Breakdown Spectroscopy (LIBS), Spectrochimica Acta, Part B 61 (2006) 565-571..
Monograph
Nasrazadani, S. (2011). Practical Applications of FTIR to Characterize Paving Materials .
Nasrazadani, S. (2009). Horizontal Cracking Mechanism in CRCP.
Nasrazadani, S. (2008). Application of FTIR for Quantitative Lime Analysis.
Popular Press Article
Nasrazadani, S. (2007). "Direct Deposition of Boron Nitride Films Using E-beam Evaporation on Si (100) Without N Bombardment" , 2007 Virtual Conference on Nanoscale Science and Technology, VC-NST, October 21-25, 2007, Fayetteville Arkansas, USA..
Poster
Al Shenawa, A., D'Souza, N. A., Nasrazadani, S., Scharf, T. W. (2017). Effect of Supercritical CO2 on Corrosion and Wear Resistance of BMI Coating Filled with Montmorillonite Clay. Houston Texas:.
Yaseen, W. K., Rawshdeh, M., Golden, T. D., Nasrazadani, S., (2015). Utilizing Hydrophobic Coatings in Corrosion Protection and Anti-Icing. Poster session of ACS Southeast (SERMACS)/Southwest (SWRM) regional meeting.

Awarded Grants

Contracts, Grants and Sponsored Research

Grant - Research
Siller Carrillo, H. R. (Co-Principal), Golden, T. D. (Co-Principal), D'Souza, F. (Supporting), Mirshams, R. A. (Supporting), Nasrazadani, S. (Supporting), "Evaluation of Process Variables Effect on Mechanical Properties and Corrosion of SLM 316L and SL17-7 Parts," Sponsored by Advanced Materials and Manufacturing Processes Institute, University of North Texas, $25000 Funded. (March 2019 – Present).
Siller, H. R. (Principal), Bostanci, H. (Co-Principal), Mirshams, R. A. (Co-Principal), Nasrazadani, S. (Co-Principal), "Evaluation of Hybrid Manufacturing Processes for Advanced Small Modular Reactor (SMR) Components," Sponsored by Advanced Materials and Manufacturing Processes Institute, University of North Texas, $16960 Funded. (January 1, 2020July 31, 2020).
Dahotre, N. (Principal), Mukherjee, S. (Co-Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Title Removed - Export Controlled," Sponsored by KRI at Northeastern, Federal, $110867 Funded. (March 30, 2019March 29, 2020).
Mukherjee, S. (Co-Principal), Dahotre, N. (Principal), Voevodin, A. (Co-Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Engineered Materials and Materials Design of Engineered Materials," Sponsored by Northeastern University (Army Natick Subcontract), Federal, $1000000 Funded. (20182019).
Mukherjee, S. (Principal), Mishra, R. S. (Co-Principal), Voevodin, A. (Co-Principal), Schultz, D. R. (Principal), Nasrazadani, S. (Co-Principal), Yu, C. (Co-Principal), Zhang, H. (Co-Principal), "Light Weight Composite Structures for Advanced Tactical Shelters," Sponsored by Northeastern University (Army Natick Subcontract), Federal, $873283 Funded. (20162018).
Nasrazadani, S., "Development of New Accelerated Corrosion Test(s) for All-Aluminum Microchannel and Tube and Fin Heat Exchangers," Sponsored by American Society of Heating, Refrigeration, Air conditioning Engineers (ASHRAE), International, $179250.00 Funded. (April 1, 2014April 1, 2017).
,
Overall
Summative Rating
Challenge and
Engagement Index
Response Rate

out of 5

out of 7
%
of
students responded
  • Overall Summative Rating (median):
    This rating represents the combined responses of students to the four global summative items and is presented to provide an overall index of the class’s quality. Overall summative statements include the following (response options include a Likert scale ranging from 5 = Excellent, 3 = Good, and 1= Very poor):
    • The course as a whole was
    • The course content was
    • The instructor’s contribution to the course was
    • The instructor’s effectiveness in teaching the subject matter was
  • Challenge and Engagement Index:
    This rating combines student responses to several SPOT items relating to how academically challenging students found the course to be and how engaged they were. Challenge and Engagement Index items include the following (response options include a Likert scale ranging from 7 = Much higher, 4 = Average, and 1 = Much lower):
    • Do you expect your grade in this course to be
    • The intellectual challenge presented was
    • The amount of effort you put into this course was
    • The amount of effort to succeed in this course was
    • Your involvement in course (doing assignments, attending classes, etc.) was
CLOSE