Yu, C. (2016). Recent Trends in Cold-Formed Steel Construction. 1(1), 332. Cambridge: Woodhead Publishing. https://www.elsevier.com/books/recent-trends-in-cold-formed-steel-construction/yu/978-0-08-100160-8
Rahman, N., Chen, H., Yu, C. (2020). Structural Engineering Handbook. Chapter 9, . McGraw-Hill. https://www.mhprofessional.com/9781260115987-usa-structural-engineering-handbook-fifth-edition-group
Yu, C., Yelmagandla, H., Gondipalli, H. (2022). Behavior and Strength of Cold-Formed Steel Framed Shear Walls Sheathed by MgO Board. Proceedings of the 2022 CFSRC Colloquium. https://jscholarship.library.jhu.edu/handle/1774.2/67714
Liu, J., Liu, S., Zhao, J., Yu, C. (2022). Flexural Strength of Cold-Formed Steel Joist with Stiffened Web Holes. Proceedings of the 2022 CFSRC Colloquium. https://jscholarship.library.jhu.edu/handle/1774.2/67688
Yu, C., Tian, Y., Zhang, W. (2022). Cold-Formed Steel Corrugated Sheet Shear Wall with Special Energy Dissipation Bracing. Proceedings of 2022 Annual Stability Conference.
Xu, X., Zhang, W., Yu, C. (2021). High-Strength Cold-Formed Steel Framed Shear Wall with Sheet Steel Sheathing. Structural Stability Research Council.
Zhang, W., Yu, C., Mahdavian, M., Lan, X. (2020). Cold-Formed Steel Framed Shear Walls with In-Frame Corrugated Steel Sheathing. Proceedings of the 2020 CFSRC Colloquium. https://jscholarship.library.jhu.edu/handle/1774.2/63132
Yu, C., Tian, Y., Yan, Z. (2020). Shear Strength of Cold-Formed Steel Flexural Members Connected Using Clip Angles. Proceedings of 2020 SSRC Annual Stability Conference. https://www.aisc.org/education/continuingeducation/education-archives/shear-strength-of-cold-formed-steel-flexural-members-connected-using-clip-angles/
Yu, C., Yan, Z., Zhang, W. (2018). Strength of Cold-Formed Steel Clip Angle in Combined Bending and Shear Loading. St. Louis: Proceedings of the 24th International Specialty Conference on Cold-Formed Steel Structures.
Yu, C., Zhang, W., Yan, Z., Mahdavian, M. (2018). Tensile Strength and Serviceability of Cold-Formed Steel Clip Angles.. St. Louis: Proceedings of the 24th International Specialty Conference on Cold-Formed Steel Structures.
Artman, J., Yu, C. (2018). The Design and Development of Lightweight Composite Panels for Rigid Wall Shelters.. St. Louis: Proceedings of the 24th International Specialty Conference on Cold-Formed Steel Structures.
Zhdanov, D., Yu, C. (2018). Recent Trends in the Use of Cold-Formed Steel Profiles in the US Construction Industry. 137–143. Brest: Perspective Directions of Innovative Development of Construction Industry and Engineering Training.
Lan, X., Yu, C., Zhang, W., Mahdavian, M. (2018). Seismic Performance Evaluation of Cold-Formed Steel Framed Shear Walls using In-Frame Corrugated Steel Sheets. Baltimore, MD: Structural Stability Research Council.
Johnson, A., Smith, B., Moen, C., Yu, C. (2017). A Stud on the System Reliability of Cold-Formed Steel Roof Trusses. San Antonio, TX: Structural Stability Research Council.
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2017). Finite Element Analysis on Shear Strength of Cold-Formed Steel Shear Walls Using Corrugated Steel Sheathing. San Antonio, TX: Structural Stability Research Council.
Zhang, W., Wang, J., Mahdavian, M., Yu, C. (2016). Seismic performance of cold-formed steel framed buildings using corrugated sheet shear walls. Geotechnical and Structural Engineering Congress 2016. 252–263.
Bagheri, A., Kondapally, S., Bostanci, H., Foster, P. R., Yu, C. (2016). Simulation and Visualization of an Innovative Rotary Displacer Stirling Engine Operation. Proc. 2016 ASEE-GSW Annual Conference, Fort Worth, TX, March 6-8, 2016.
Yu, C., Johnson, A., Ramirez, R. (2016). Advancing BIM for Cold-Formed Steel Structures. Baltimore, MD:.
Jia, P., Zhang, W., Mahdavian, M., Derrick, N., Yu, C. (2016). Behavior of Steel Sheet Sheathed Cold-Formed Steel Walls Subjected to Combined Lateral and Vertical Loads. Baltimore, MD:.
Mahdavian, M., Zhang, W., Yu, C. (2016). Sheathing Overlapping and Attachment Methods for Cold-Formed Steel Shear Walls with Corrugated Steel Sheathing. Baltimore, MD:.
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2016). Simulating the Seismic Performance of Cold-Formed Steel Framed Buildings using Corrugated Sheet Shear Walls. Baltimore, MD:.
Yu, C., Yousof, M., Mahdavian, M., Zhang, W. (2016). Screw Connections in Cold-Formed Steel Clip Angles Subjected to Uplift Forces. Las Vegas, NV:.
Mahdavian, M., Zhang, W., Ding, C., Moen, C., Yu, C. (2016). Cyclic Simulation of Cold-Formed Steel Shear Walls with Corrugated Steel Sheathing. Orlando, FL: Structural Stability Research Council.
Yu, C., Zhang, W., Wang, J., Mahdavian, M. (2016). Seismic Performance of Cold-Formed Steel Framed Buildings using Corrugated Sheet Shear Walls. Phoenix, AZ: ASCE.
Yu, C., Yousof, M. (2015). Behavior and Design of Thin-Walled Cold-Formed Steel Clip Angles subjected to Compression Load. Lisbon:.
Yu, C., Vora, H., Li, C. (2015). High-Strength Cold-Formed Steel Framed Shear Walls Sheathed with Noncombustible Panels. Lisbon:.
Yu, C., Yu, G., Wang, J. (2015). Optimization of Cold-Formed Steel Framed Shear Wall Sheathed with Corrugated Steel Sheets: Experiments and Dynamic Analysis. Structures Congress 2015. 1008–1020.
Yu, C., Yousof, M., Mahdavian, M. (2015). Behavior and Design of Thin-Walled Cold-Formed Steel Clip Angles Subjected to Shear Load. Nashville, TN: Proceedings of Annual Stability Conference.
Yu, C., Li, C., Elliott, C. (2014). Behavior and Design of Cold-Formed, Steel-Framed Shear Walls using Structural Composite Panels. Structures Congress 2014. 2721–2733.
Schafer, B., Ayhan, D., Leng, J., Liu, P., Padilla-Llano, D., Peterman, K., Stehman, M., Buonopane, S., Eatherton, M., Madsen, R., others, (2014). The CFS-NEES effort: Advancing cold-formed steel earthquake engineering. Proceedings of the 10th National Conference in Earthquake Engineering.
Liu, P., Peterman, K., Yu, C., Schafer, B. (2012). Cold-formed steel shear walls in ledger-framed buildings. Annual Stability Conference, Structural Stability Research Council.
Zhao, Y., Yan, W. M., Yu, C. (2012). Simplified Method for Elastic Distortional Buckling Stress of Cold-Formed Thin-Wall Steel Members. Applied Mechanics and Materials. 166, 3391–3398.
Hedric, A., Yanagi, N., Huang, Z., Yu, C. (2011). A Pilot Research on Seismic Performance Factors for CFS Shear Walls with Steel Sheet Sheathing. Proceedings of Texas Section ASCE Spring 2011 Meeting.
Yu, C., Huang, Z., Vora, H. (2009). Cold-formed steel framed shear wall assemblies with corrugated sheet steel sheathing. Proceedings of the Annual Stability Conference, Structural Stability Research Council, Phoenix, AZ.
Yu, C., Schafer, B. (2003). Analysis and testing of cold-formed steel beams. Advances in Structures: Proceedings of the International Conference on Advances in Structures (ASSCCA’03), Sydney, Australia, 22-25 June 2003. 1, 387.
Yu, C. (2021). Cold-Formed Steel Clip Angle Design Guide, 2021 Edition. AISI D114, . Washington DC: American Iron and Steel Institute. https://shop.steel.org/products/cold-formed-steel-clip-angle-design-guide-2021-edition-electronic-version
Liu, X., Zhang, W., Yu, C., Li, Y., Jiang, Z., Yu, S. (2022). Experimental study on cold-formed steel shear walls with different corrugated steel sheathings. Journal of Constructional Steel Research. 199, . Elsevier. https://www.sciencedirect.com/science/article/abs/pii/S0143974X22005090?via%3Dihub
Zhao, J., Liu, J., Yu, C., Zhang, W. (2022). Test investigation and direct strength method on cold-formed steel compression members with web holes of different widths. Engineering Structures. 272, . Elsevier. https://doi.org/10.1016/j.engstruct.2022.114979
Zhao, Y., Yu, C., Zhang, W., Xie, Z., Yu, S., Du, X. (2022). Shake table tests of a corrugated steel sheathed cold-formed steel structure. 60, . Journal of Building Engineering. https://doi.org/10.1016/j.jobe.2022.105161
Qiu, J., Zhao, Q., Wang, Z., Yu, C. (2022). Lateral Behavior of Trapezoidally Corrugated Wall Plates in Steel Plate Shear Walls, Part 1: Elastic Buckling. Thin-Walled Structures. 174, . https://doi.org/10.1016/j.tws.2022.109104
Qiu, J., Zhao, Q., Yu, C., Wang, Z. (2022). Lateral Behavior of Trapezoidally Corrugated Wall Plates in Steel Plate Shear Walls, Part I1: Shear Strength and Post-Peak Behavior. Thin-Walled Structures. 174, . Elsevier. https://doi.org/10.1016/j.tws.2022.109103.
Zhang, W., Mahdavian, M., Lan, X., Yu, C. (2021). Cold-Formed Steel Framed Shear Walls with In-Frame Corrugated Steel Sheathing. Advances in Structural Engineering. 147(11), .
Yu, C., Tian, Y., Yan, W., Zhang, W. (2021). Novel Energy Dissipation Bracing Designed for Corrugated Sheet Sheathed Cold-Formed Steel Shear Wall. Journal of Structural Engineering. 147(11), .
Xie, Z., Zhang, W., Chen, T., Zhou, D., Shi, L., Yu, C. (2021). Comparative Analysis and Design Method of Shear Strength for Hybrid SPR-SDS Joints in Thin-Walled Steel Structures. Structures. 33, . Elsevier. https://doi.org/10.1016/j.istruc.2021.07.003
Zhao, Y., Yu, C., Chen, S., Jian, Z., Zhang, W. (2021). Shear Performance of Cold-Formed Steel Shear Walls with High-Aspect-Ratios. Structures. 33, . Elsevier. https://doi.org/10.1016/j.istruc.2021.05.011.
Liu, X., Meng, K., Zhang, A., Zhu, T., Yu, C. (2021). Bearing Capacity of H-Section Beam Wrapped with Ceramsite Concrete. Steel and Composite Structures. 40(5), 679-696.
Zhang, J., Li, X., Yu, C., Wang, C. (2021). Cyclic Behavior of High-Strength Concrete Shear Walls with High-Strength Reinforcements and Boundary CFST Columns. Journal of Constructional Steel Research. 182, . Elsevier. https://doi.org/10.1016/j.jcsr.2021.106692
Zhang, W., Xu, X., Liu, Y., Yu, C., Liu, X., Xie, Z. (2021). High-Strength Cold-Formed Steel Framed Shear Wall with Steel Sheet Sheathing. Thin-Walled Structures. 162, . Elseviwe. https://doi.org/10.1016/j.tws.2021.107584
Xie, Z., Zhang, W., Yan, W., Zhang, Y., Mu, T., Yu, C. (2021). Study on Shear Performance and Calculation Method for Self-pierce Riveted Joints in Galvanized Steel Sheet. Thin-Walled Structures. 161, . Elsevier. https://doi.org/10.1016/j.tws.2021.107490
Zhan, X., Liu, X., Feng, S., Yu, C. (2021). Seismic Performance of a Square HSS Column to H-section Beam Bolted Connection with Double Cover Plate. Engineering Structures. 131, . Elsevier. https://doi.org/10.1016/j.engstruct.2020.111729.
Liu, X., Chen, G., Xu, L., Yu, C., Jiang, Z. (2021). Seismic Performance of Blind-Bolted Joints for Square Steel Tube Columns under Bending-Shear. Journal of Constructional Steel Research. 176, . Elsevier. https://doi.org/10.1016/j.jcsr.2020.106395.
Zhang, A., Liu, X., Wang, Y., Yu, C., Bai, Z., Ha, T. (2021). Static performance of slidable bolt-assembly truss-to-column connection with oversized bolt holes. Journal of Constructional Steel Research. 176, . Elsevier. https://doi.org/10.1016/j.jcsr.2020.106374.
Wang, Y., Cui, X., Liu, X., Yu, C., Bai, Z. (2020). Seismic Performance of Bolted Beam-To-Column Connection with Rib-Stiffened Splicing Plate. Journal of Constructional Steel Research. 174, . Elsevier. https://www.sciencedirect.com/science/article/abs/pii/S0143974X2030852X
Liu, X., Feng, S., Shang, Z., Yu, C., Bai, Z. (2020). Performance of prestressed T-type self-centering energy-dissipation brace. Engineering Structures. 223, . Elsevier. https://doi.org/10.1016/j.engstruct.2020.111174
Xie, Z., Zhang, A., Zhang, Y., Yu, C., Mu, T. (2020). Research on Shear Behavior and Calculation Method for the Screw-Rivet Hybrid Connection in Cold-Formed Thin-Walled Steel. 41(10), . Journal of Building Structures.
Zhang, J., Li, X., Cao, W., Yu, C. (2020). Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements. Engineering Structures. 220, . Elsevier. https://www.sciencedirect.com/science/article/abs/pii/S0141029620316503
Zhao, Q., Qiu, J., Zhao, Y., Yu, C., Liu, Z. (2020). Estimating Fundamental Period of Corrugated Steel Plate Shear Walls. Civil Engineering Journal. 24, 3023-3033. KSCE Journal of Civil Engineering. https://doi.org/10.1007/s12205-020-2305-2
Liu, X., Zhang, A., Wang, Y., Shang, Z., Yu, C., Bai, Z. (2020). Seismic behavior of an X-deployed cable-braced bolt-assembly steel frame. Journal of Constructional Steel Research. 170, . Elsevier. https://doi.org/10.1016/j.jcsr.2020.106132
Xie,, Zhang, A., Yan, W., Zhang, Y., Yu, C., Mu, T. (2020). The Shear Behavior and Calculation Method of Self-Piercing Riveted Connections on Thin-Waled Steel Sheets. Journal of Engineering Mechanics. 37(6), .
Zhang, X., Xie, Z., Song, L., Yan, W., Yu, C. (2020). Feasibility Research on the Application of Self-Piercing-Riveted Connection in Cold-formed Steel Structures. Journal of Constructional Steel Research. 168, . https://www.sciencedirect.com/science/article/abs/pii/S0143974X19311861?dgcid=rss_sd_all
Liu, X., Cui, F., Zhang, X., Yu, C., Jiang, Z. (2019). Seismic Performance of Bolted Connection of H-Beam to HSS-Column with Web End-Plate. Journal of Constructional Steel Research. 156(2019), 167-181. Elsevier.
Song, L., Yu, C., Tang, Q., Yang, W., Xie, Z. (2019). Flexural Behavior Investigation of the CFS Truss Beams with Self-Piercing Riveted Connection. Journal of Constructional Steel Research. 156, 28-45. Elsevier.
Zhao, J., Yu, C., Sun, K. (2019). Tests and Direct Strength Design on Cold-Formed Steel Channel Beams with Web Holes. Engineering Structures. 184, 434-446. https://www.sciencedirect.com/science/article/abs/pii/S0141029618324945
Zhao, J., Yu, C. (2019). Experimental Study and Numerical Simulation of G550 High Strength Cold-Formed Steel Z-Section Members under Pure Bending and Moment Gradient. 19(2), 366-380. Springer. https://doi.org/10.1007/s13296-018-0118-7. PP1-15.
Yu, C. (2019). Seismic Performance of Cold-Formed Steel Shear Wall using Corrugated Sheathing with Slits. Journal of Structural Engineering. 145(4), . ASCE.
Yan, W., Mu, T., Xie, Z., Yu, C. (2019). Experimental Investigation of Typical Connections for Fabricated Cold-Formed Steel Structures. Advances in Structural Engineering. 22(1), 141–155.
Xu, L., Zhang, S., Yu, C. (2018). Determination of Equivalent Rigidities of Cold-Formed Steel Floor Systems for Vibration Analysis, Part II: Evaluation of the Fundamental Frequency. Thin-Walled Structures. 131, 1-15. Elsevier.
Zhang, W., Mahdavian, M., Yu, C. (2018). Different Slit Configuration in Corrugated Sheathing of Cold-Formed Steel Shear Wall. Journal of Constructional Steel Research. 150(2018), 430-441. Elsevier.
Xie, Z., Yan, W., Yu, C., Mu, T., Song, L. (2018). Experimental Investigation of Cold-Formed Steel Shear Walls with Self-Piercing Riveted Connections. Thin-Walled Structures. 131, 1-15. Elsevier.
Xie, Z., Yan, W., Yu, C., Mu, T., Song, L. (2018). Improved Shear Strength Design of Cold-Formed Steel Connection with Single Self-Piercing Rivet. Thin-Walled Structures. 131, 708-717. Elsevier.
Xie, Z., Yan, W., Yu, C., Mu, T., Song, L. (2018). Tensile Capacity of Self-Piercing Rivet Connections in Thin-Walled Steel Structures. Journal of Constructional Steel Research. 144, 211-220. Elsevier.
Zhang, W., Mahdavian, M., Yousof, M., Yu, C. (2018). Testing and Design of Cold-Formed Steel Clip Angles in Tension: Pull-Over and Serviceability. Thin-Walled Structures. 124, 13-19. Elsevier.
Zhang, W., Mahdavian, M., Yu, C. (2018). Lateral Strength and Deflection of Cold-Formed Steel Shear Wall using Corrugated Sheathing. Journal of Constructional Steel Research. 148, 399-408. https://www.sciencedirect.com/science/article/pii/S0143974X17308520
Yu, C., Zhang, W., Yu, G., Wang, J. (2018). Cold-Formed Steel Framed Shear Wall using Corrugated Steel Sheathing with Slits. Journal of Structural Engineering. 144(8), . ASCE.
Qiu, J., Zhao, Q., Yu, C., Li, Z. (2018). Experimental Studies on Cyclic Behavior of Corrugated Steel Plate Shear Walls. Journal of Structural Engineering. 144(11), . ASCE. https://ascelibrary.org/doi/10.1061/%28ASCE%29ST.1943-541X.0002165
Zhang, J., Zheng, W., Yu, C., Cao, W. (2018). Shaking Table Test of RC Coupled Shear Walls with Single Layer of Web Reinforcement and Inclined Steel Bars. Advances in Structural Engineering. 21(15), 2282-2298. https://journals.sagepub.com/doi/abs/10.1177/1369433218772350
Yu, C., Vora, H. (2017). A pilot study on cold-formed steel framed shear wall assemblies with corrugated sheathing. Other. 8(3), 272–288. Inderscience Publishers (IEL).
Yu, C., Yousof, M., Mahdavian, M., Zhang, W. (2017). Design of Cold-Formed Steel Clip Angles in Compression. Journal of Structural Engineering. 143(6), .
Yan, W., Xie, Z., Yu, C., Song, L., He, H. (2017). Experimental investigation and design method for the shear strength of self-piercing rivet connections in thin-walled steel structures. Journal of Constructional Steel Research. 133, 231–240. Elsevier.
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2017). Experiments and Simulations of Cold-Formed Steel Wall Assemblies Using Corrugated Steel Sheathing Subjected to Shear and Gravity Loads. Journal of Structural Engineering. 143(3), .
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2017). Seismic Performance Evaluation of Cold-Formed Steel Shear Walls Using Corrugated Steel Sheathing. Journal of Structural Engineering. 143(11), 04017151. American Society of Civil Engineers.
Zhang, W., Mahdavian, M., Yu, C. (2017). Recent Development on Seismic Performance of Cold-Formed Steel Framed Shear Walls with Corrugated Steel Sheathing. 19(6), .
Xie, Z., Song, L., Yan, W., He, H., (2017). Experimental Investigation on Self-Piercing Rivet Connections in Thin-Walled Steel Structures. Journal of Consumer Behaviour. 133, 231-240. Elsevier.
Lu, X., Gu, D., Yang, Q., (2017). Experimental Study and Finite Element Analysis of Energy Dissipating Outrigger. Advances in Structural Engineering. 20(8), 1196-1209.
Johnson, A., Ramirez, R., Yu, C. (2016). Advancing BIM for Cold-Formed Steel Structures. Missouri University of Science and Technology.
Yu, C., Yousof, M., Mahdavian, M., Zhang, W. (2016). Behavior and design of thin-walled cold-formed steel clip angles subjected to shear load. Journal of Structural Engineering. 142(7), 04016040. American Society of Civil Engineers.
Jia, P., Zhang, W., Mahdavian, M., Derrick, N., Yu, C. (2016). Behavior of Steel Sheet Sheathed Cold-Formed Steel Walls Subjected to Combined Lateral and Vertical Loads. Missouri University of Science and Technology.
Yu, C., Yu, G. (2016). Experimental Investigation of Cold-Formed Steel Framed Shear Wall Using Corrugated Steel Sheathing with Circular Holes. Journal of Structural Engineering. 142(12), .
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2016). Experiments and Simulations of Cold-Formed Steel Wall Assemblies Using Corrugated Steel Sheathing Subjected to Shear and Gravity Loads. Journal of Structural Engineering. 143(3), 04016193. American Society of Civil Engineers.
Schafer, B., Ayhan, D., Leng, J., Liu, P., Padilla-Llano, D., Peterman, K., Stehman, M., Buonopane, S., Eatherton, M., Madsen, R., others, (2016). Seismic response and engineering of cold-formed steel framed buildings. Structures. 8, 197–212. Elsevier.
Mahdavian, M., Zhang, W., Yu, C. (2016). Sheathing Overlapping and Attachment Methods for Cold-Formed Steel Shear Walls with Corrugated Steel Sheathing. Missouri University of Science and Technology.
Zhang, W., Mahdavian, M., Li, Y., Yu, C. (2016). Simulating the Seismic Performance of Cold-Formed Steel Framed Buildings using Corrugated Sheet Shear Walls. Missouri University of Science and Technology.
Dara, M. (2016). Direct Strength Method for Web Crippling of Cold-Formed Steel C- and Z- Sections Subjected to One-Flange Loading. 105(1), . OMICS International.
Yu, C., Li, C. (2015). Behavior and Strength of Cold-Formed Steel Shear Walls using Composite Panels. Advances in Structural Engineering. 18(5), 1063-1070.
Yu, C., Li, C. (2015). Behavior and Strength of Cold-Formed Steel Shear Walls using Composite Panels. Advances in Structural Engineering. 18(7), 1063–1070. Multi-Science Publishing Co. Ltd.
Tian, H., Li, Y., Yu, C. (2015). Testing of steel sheathed cold-formed steel trussed shear walls. Thin-Walled Structures. 94, 280–292. Elsevier.
Yu, C. (2014). Design of steel sheathed cold-formed steel framed shear walls.
Balh, N., DaBreo, J., Ong-Tone, C., El-Saloussy, K., Yu, C., Rogers, C. (2014). Design of steel sheathed cold-formed steel framed shear walls. Thin-Walled Structures. 75, 76–86. Elsevier.
Yu, C. (2014). Determining Elastic and Shear Moduli of cold-Formed Steel at Elevated Temperatures Using a New Sonic Resonance Method.
De León, D., Reyes, A., Yu, C. (2014). Evaluación probabilista de la seguridad estructural de un tipo de conexiones atornilladas y soldadas para zonas sísmicas. Other. 37(2), 97–106. Universidad del Zulia-Facultad de Ingenieria.
Yu, C., Yu, G., Wang, J. (2014). Innovative cold-formed steel framed shear wall sheathed with corrugated steel sheets: experiments and dynamic analysis. Missouri University of Science and Technology.
Yu, C. (2014). Shaking Table Test of Reinforced Concrete Wall Structure with Concealed Bracings.
Yu, C., Panyanouvong, M. X. (2013). Bearing strength of cold-formed steel bolted connections with a gap. Thin-Walled Structures. 67, 110–115. Elsevier.
Yu, C. (2013). Bearing Strength of Cold-Formed Steel Bolted Connections with a Gaps.
Yanagi, N., Yu, C. (2013). Effective strip method for the design of cold-formed steel framed shear wall with steel sheet sheathing. Journal of Structural Engineering. 140(4), 04013101. American Society of Civil Engineers.
Yu, C. (2013). Effective Strip Model for Cold-Formed Steel Shear Wall using Steel Sheet Sheathing.
De León, D., Reyes, A., Yu, C. (2013). Probabilistic assessment of connections for steel buildings on seismic zones. Journal of Constructional Steel Research. 88, 15–20. Elsevier.
Yu, C. (2013). Probabilistic Assessment of the Structural Safety of Bolted And Welded Connection for Seismic Zones.
Yu, C. (2012). Analytical Model for Cold-Formed Steel Framed Shear Wall with Steel Sheet Sheathing.
Yanagi, N., Yu, C. (2012). Analytical model for cold-formed steel framed shear wall with steel sheet sheathing. Missouri University of Science and Technology.
Yu, C., Li, C. (2012). Behavior and Strength of Cold-formed Steel Framed Shear Walls Sheather with Composite Panels. Missouri University of Science and Technology.
Liu, P., Peterman, K., Yu, C., Schafer, B. (2012). Characterizaiton of Cold-formed Steel Shear Wall Behavior under Cyclic Loading for the CFS-NEES Building. Missouri University of Science and Technology.
Yu, C. (2012). Cold-Formed Steel Flexural Member with Edge Stiffened Holes: Behavior, Optimization, and Design.
Yu, C. (2012). Cold-formed steel flexural member with edge stiffened holes: Behavior, optimization, and design. Journal of Constructional Steel Research. 71, 210–218. Elsevier.
Yu, C. (2012). Cold-formed steel shear walls in ledger-framed buildings.
Yu, C. (2012). Experimental Investigation of Cold-Formed Steel Shear Walls Sheathed with Steel-Gypsum Composite Panels.
Yu, C. (2012). Experimental Study of Cold-Formed Steel Framed Shear Wall Assemblies with Tapping Corrugated Sheet Steel Sheathing.
Zhao, Y., Yan, W., Yu, C., (2012). Experimental Study of Cold-Formed Steel Framed Shear Wall Assemblies with Tapping Corrugated Sheet Steel Sheathing. Earthquake Resistant Engineering and Retrofitting. (6), 87–92. 工程抗震与加固改造编辑部.
Yu, C. (2012). Selection of delivery system, contract type, and incentive/disincentive strategy for highway construction projects in the United States.
Yu, C., Xu, K. (2012). Shear strength of a cold-formed steel sheet in bolted connections using oversized holes. Journal of Structural Engineering. 139(5), 860–864. American Society of Civil Engineers.
Yu, C. (2012). Shear Strength of Cold-Formed Steel Sheet in Bolted Connections Using Oversized Holes.
Yu, C. (2012). Simplified Method for Critical Elastic Distortional Buckling of Cold-Formed Steel C and Z Sections.
Law, K., Zhao, Y., Yan, W., Yu, C. (2012). Simplified Method for Critical Elastic Distortional Buckling of Cold-Formed Steel C and Z Sections. Advances in Structural Engineering. 15(12), 2013–2019. SAGE Publications Sage UK: London, England.
Yu, C. (2012). The 1st Student Competition on Cold-Formed Steel Design.
Yu, C., Moen, C. (2012). The 1st Student Competition on Cold-formed Steel Design. Missouri University of Science and Technology.
Yu, C. (2011). Bearing Strength of Cold-Formed Steel Bolted Connections Using Oversized Holes without Washers.
Yu, C., Chen, Y. (2011). Detailing recommendations for 1.83 m wide cold-formed steel shear walls with steel sheathing. Journal of Constructional Steel Research. 67(1), 93–101. Elsevier.
Yu, C. (2011). Detailing Recommendations for 1.83-m Wide Cold-Formed Steel Shear Walls with Steel Sheathing.
Yu, C. (2011). Determining Distortional Buckling Strength of Cold-Formed Steel Flexural C and Z Sections Using Effective Width Method Thin-Walled Structures.
Yu, C., Yan, W. (2011). Effective Width Method for determining distortional buckling strength of cold-formed steel flexural C and Z sections. Thin-Walled Structures. 49(2), 233–238. Elsevier.
Yu, C. (2011). Simplified Methods for Determining The Critical Elastic Buckling Load of Thin-Walled Cold-Formed Steel Sections.
Yu, C. (2010). Appropriate Adjustment Method for Experimental Results of Cold-Formed Steel Shear Walls Sheathed with Steel Sheets.
Yu, C., Xu, K., Sheerah, I. (2010). Bearing strength of cold-formed steel bolted connections using oversized holes without washers. Journal of Structural Engineering. 137(1), 156–159. American Society of Civil Engineers.
Yu, C. (2010). Distortional Buckling Of Cold-Formed Steel Shear Wall Studs Under Uplift Force.
Yu, C. (2010). Distortional buckling of cold-formed steel shear wall studs under uplift force. Journal of Structural Engineering. 136(3), 317–323. American Society of Civil Engineers.
Yu, C. (2010). Elastic Buckling of Thin-Walled Structural Components with Edge-Stiffened Holes.
Ix, I. (2010). Elastic Buckling of Thin-Walled Structural Components with Edge-Stiffened Holes.
Yu, C. (2010). Experimental Investigation on 6 Feet Wide Cold-Formed Steel Framed Shear Walls with Steel Sheet Sheathing.
Yu, C., Chen, Y. (2010). Experimental investigation on 6 feet wide cold-formed steel framed shear walls with steel sheet sheathing. Missouri University of Science and Technology.
Yu, C. (2010). Shear resistance of cold-formed steel framed shear walls with 0.686 mm, 0.762 mm, and 0.838 mm steel sheet sheathing. Engineering Structures. 32(6), 1522–1529. Elsevier.
Yu, C. (2010). Shear Resistance of Cold-Formed Steel Framed Shear Walls with 0.686-mm, 0.762-mm, and 0.838-mm Steel Sheet Sheathing.
Yu, C. (2009). Distortional Buckling of Cold-Formed Steel Shear Wall Studs under Uplift Force. Journal of Structural Engineering. 1(1), 73. ASCE.
Yu, C., Chen, Y. (2009). Steel sheet sheathing options for cold-formed steel framed shear wall assemblies providing shear resistance-phase 2. American Iron and Steel Institute.
Yu, C., Sheerah, I. (2008). Cold-formed steel bolted connections without washers on oversized holes shear and bearing failures in sheets. Missouri University of Science and Technology.
Vora, H., Yu, C. (2008). Pilot research on cold-formed steel framed shear wall assemblies with corrugated sheet steel sheathing. Missouri University of Science and Technology.
Yu, C. (2008). Shear resistance of cold-formed steel framed shear wall assemblies. Missouri University of Science and Technology.
Yu, C. (2007). Effect of Longitudinal Stress Gradient on the Elastic Buckling of Thin Plates.
Yu, C., Schafer, B. W. (2007). Effect of longitudinal stress gradients on elastic buckling of thin plates. Journal of Engineering Mechanics. 133(4), 452–463. American Society of Civil Engineers.
Yu, C. (2007). Simulation of Cold-Formed Steel Beams in Local and Distortional Buckling with Applications to the Direct Strength Method.
Yu, C., Schafer, B. W. (2007). Simulation of cold-formed steel beams in local and distortional buckling with applications to the direct strength method. Journal of Constructional Steel Research. 63(5), 581–590. Elsevier.
Yu, C., Vora, H., Dainard, T., Veetvkuri, P. (2007). Steel sheet sheathing options for CFS framed shear wall aseemblies providing shear resistance. Unknown.
Yu, C. (2006). Distortional Buckling Tests on Cold-Formed Steel Beams.
Yu, C., Schafer, B. W. (2006). Distortional buckling tests on cold-formed steel beams. Journal of Structural Engineering. 132(4), 515–528. American Society of Civil Engineers.
Yu, C. (2006). Effect of Longitudinal Stress Gradient on the Ultimate Strength of Thin Plates.
Yu, C., Schafer, B. W. (2006). Effect of longitudinal stress gradient on the ultimate strength of thin plates. Thin-Walled Structures. 44(7), 787–799. Elsevier.
Yu, C., Lokie, T. (2006). Effective width method based design for distortional buckling. University of Missouri–Rolla.
Yu, C., Schafer, B. W. (2006). Finite element modeling of cold-formed steel beams validation and application. University of Missouri–Rolla.
Yu, C., Schafer, B. W. (2006). Stress gradient effect on the buckling of thin plates. University of Missouri–Rolla.
Yu, C., Schafer, B. W. (2005). Distortional buckling of cold-formed steel members in bending. American Iron and Steel Institute.
Yu, C., Schafer, B. W. (2003). Local buckling tests on cold-formed steel beams. Journal of Structural Engineering. 129(12), 1596–1606. American Society of Civil Engineers.
Yu, C. (2003). Local Buckling Tests on Cold-Formed Steel Beams", ASCE, Journal of Structural Engineering.
Yeganeh, B., Yu, C. (2020). Investigation of Bolted Connections in Cold-Formed Steel Members using SAE J429 Bolts. (20-8), . American Iron and Steel Institute. https://buildusingsteel.org/wp-content/uploads/2020/12/CFSD-Report-RP20-8.pdf
Yu, C. (2018). Load Bearing Clip Angle Design – Phase II. (RP18-4), . Washington DC: American Iron and Steel Institute.
Yu, C., Yousof, M., Mahavian, M. (2015). Load bearing clip angle design. American Iron and Steel Insitute.
Schafer, B. W., Yu, C. (2002). Test verification of the effect of stress gradient on webs of cee and zee sections. American Iron and Steel Institute.
